X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fi40e%2Fbase%2Fi40e_adminq_cmd.h;h=801c0ff1be3e7e8862f1f3d3581245d637efa8b2;hb=d4b89002b0b7792e5fc0f2f9d8d2e4c5489b33b3;hp=09f5bf5ccebd60389c00c119ea177586376b2ad2;hpb=de2cd512b1762a3595e58ee7af29ff350fb7680f;p=dpdk.git

diff --git a/drivers/net/i40e/base/i40e_adminq_cmd.h b/drivers/net/i40e/base/i40e_adminq_cmd.h
index 09f5bf5cce..801c0ff1be 100644
--- a/drivers/net/i40e/base/i40e_adminq_cmd.h
+++ b/drivers/net/i40e/base/i40e_adminq_cmd.h
@@ -41,7 +41,15 @@ POSSIBILITY OF SUCH DAMAGE.
  */
 
 #define I40E_FW_API_VERSION_MAJOR	0x0001
-#define I40E_FW_API_VERSION_MINOR	0x0005
+#define I40E_FW_API_VERSION_MINOR_X722	0x0005
+#define I40E_FW_API_VERSION_MINOR_X710	0x0007
+
+#define I40E_FW_MINOR_VERSION(_h) ((_h)->mac.type == I40E_MAC_XL710 ? \
+					I40E_FW_API_VERSION_MINOR_X710 : \
+					I40E_FW_API_VERSION_MINOR_X722)
+
+/* API version 1.7 implements additional link and PHY-specific APIs  */
+#define I40E_MINOR_VER_GET_LINK_INFO_XL710 0x0007
 
 struct i40e_aq_desc {
 	__le16 flags;
@@ -206,6 +214,7 @@ enum i40e_admin_queue_opc {
 	/* DCB commands */
 	i40e_aqc_opc_dcb_ignore_pfc	= 0x0301,
 	i40e_aqc_opc_dcb_updated	= 0x0302,
+	i40e_aqc_opc_set_dcb_parameters = 0x0303,
 
 	/* TX scheduler */
 	i40e_aqc_opc_configure_vsi_bw_limit		= 0x0400,
@@ -245,6 +254,8 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_set_phy_debug		= 0x0622,
 	i40e_aqc_opc_upload_ext_phy_fm		= 0x0625,
 	i40e_aqc_opc_run_phy_activity		= 0x0626,
+	i40e_aqc_opc_set_phy_register		= 0x0628,
+	i40e_aqc_opc_get_phy_register		= 0x0629,
 
 	/* NVM commands */
 	i40e_aqc_opc_nvm_read			= 0x0701,
@@ -252,6 +263,7 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_nvm_update			= 0x0703,
 	i40e_aqc_opc_nvm_config_read		= 0x0704,
 	i40e_aqc_opc_nvm_config_write		= 0x0705,
+	i40e_aqc_opc_nvm_progress		= 0x0706,
 	i40e_aqc_opc_oem_post_update		= 0x0720,
 	i40e_aqc_opc_thermal_sensor		= 0x0721,
 
@@ -777,7 +789,22 @@ struct i40e_aqc_set_switch_config {
 #define I40E_AQ_SET_SWITCH_CFG_L2_FILTER	0x0002
 #define I40E_AQ_SET_SWITCH_CFG_HW_ATR_EVICT	0x0004
 	__le16	valid_flags;
-	u8	reserved[12];
+	/* The ethertype in switch_tag is dropped on ingress and used
+	 * internally by the switch. Set this to zero for the default
+	 * of 0x88a8 (802.1ad). Should be zero for firmware API
+	 * versions lower than 1.7.
+	 */
+	__le16	switch_tag;
+	/* The ethertypes in first_tag and second_tag are used to
+	 * match the outer and inner VLAN tags (respectively) when HW
+	 * double VLAN tagging is enabled via the set port parameters
+	 * AQ command. Otherwise these are both ignored. Set them to
+	 * zero for their defaults of 0x8100 (802.1Q). Should be zero
+	 * for firmware API versions lower than 1.7.
+	 */
+	__le16	first_tag;
+	__le16	second_tag;
+	u8	reserved[6];
 };
 
 I40E_CHECK_CMD_LENGTH(i40e_aqc_set_switch_config);
@@ -1829,6 +1856,8 @@ enum i40e_aq_phy_type {
 	I40E_PHY_TYPE_10GBASE_CR1_CU		= 0xB,
 	I40E_PHY_TYPE_10GBASE_AOC		= 0xC,
 	I40E_PHY_TYPE_40GBASE_AOC		= 0xD,
+	I40E_PHY_TYPE_UNRECOGNIZED		= 0xE,
+	I40E_PHY_TYPE_UNSUPPORTED		= 0xF,
 	I40E_PHY_TYPE_100BASE_TX		= 0x11,
 	I40E_PHY_TYPE_1000BASE_T		= 0x12,
 	I40E_PHY_TYPE_10GBASE_T			= 0x13,
@@ -1847,7 +1876,12 @@ enum i40e_aq_phy_type {
 	I40E_PHY_TYPE_25GBASE_CR		= 0x20,
 	I40E_PHY_TYPE_25GBASE_SR		= 0x21,
 	I40E_PHY_TYPE_25GBASE_LR		= 0x22,
-	I40E_PHY_TYPE_MAX
+	I40E_PHY_TYPE_25GBASE_AOC		= 0x23,
+	I40E_PHY_TYPE_25GBASE_ACC		= 0x24,
+	I40E_PHY_TYPE_MAX,
+	I40E_PHY_TYPE_NOT_SUPPORTED_HIGH_TEMP	= 0xFD,
+	I40E_PHY_TYPE_EMPTY			= 0xFE,
+	I40E_PHY_TYPE_DEFAULT			= 0xFF,
 };
 
 #define I40E_LINK_SPEED_100MB_SHIFT	0x1
@@ -1904,6 +1938,8 @@ struct i40e_aq_get_phy_abilities_resp {
 #define I40E_AQ_PHY_TYPE_EXT_25G_CR	0x02
 #define I40E_AQ_PHY_TYPE_EXT_25G_SR	0x04
 #define I40E_AQ_PHY_TYPE_EXT_25G_LR	0x08
+#define I40E_AQ_PHY_TYPE_EXT_25G_AOC	0x10
+#define I40E_AQ_PHY_TYPE_EXT_25G_ACC	0x20
 	u8	fec_cfg_curr_mod_ext_info;
 #define I40E_AQ_ENABLE_FEC_KR		0x01
 #define I40E_AQ_ENABLE_FEC_RS		0x02
@@ -2033,19 +2069,31 @@ struct i40e_aqc_get_link_status {
 #define I40E_AQ_25G_SERDES_UCODE_ERR	0X04
 #define I40E_AQ_25G_NIMB_UCODE_ERR	0X05
 	u8	loopback; /* use defines from i40e_aqc_set_lb_mode */
+/* Since firmware API 1.7 loopback field keeps power class info as well */
+#define I40E_AQ_LOOPBACK_MASK		0x07
+#define I40E_AQ_PWR_CLASS_SHIFT_LB	6
+#define I40E_AQ_PWR_CLASS_MASK_LB	(0x03 << I40E_AQ_PWR_CLASS_SHIFT_LB)
 	__le16	max_frame_size;
 	u8	config;
 #define I40E_AQ_CONFIG_FEC_KR_ENA	0x01
 #define I40E_AQ_CONFIG_FEC_RS_ENA	0x02
 #define I40E_AQ_CONFIG_CRC_ENA		0x04
 #define I40E_AQ_CONFIG_PACING_MASK	0x78
-	u8	power_desc;
+	union {
+		struct {
+			u8	power_desc;
 #define I40E_AQ_LINK_POWER_CLASS_1	0x00
 #define I40E_AQ_LINK_POWER_CLASS_2	0x01
 #define I40E_AQ_LINK_POWER_CLASS_3	0x02
 #define I40E_AQ_LINK_POWER_CLASS_4	0x03
 #define I40E_AQ_PWR_CLASS_MASK		0x03
-	u8	reserved[4];
+			u8	reserved[4];
+		};
+		struct {
+			u8	link_type[4];
+			u8	link_type_ext;
+		};
+	};
 };
 
 I40E_CHECK_CMD_LENGTH(i40e_aqc_get_link_status);
@@ -2128,14 +2176,34 @@ struct i40e_aqc_run_phy_activity {
 
 I40E_CHECK_CMD_LENGTH(i40e_aqc_run_phy_activity);
 
+/* Set PHY Register command (0x0628) */
+/* Get PHY Register command (0x0629) */
+struct i40e_aqc_phy_register_access {
+	u8	phy_interface;
+#define I40E_AQ_PHY_REG_ACCESS_INTERNAL	0
+#define I40E_AQ_PHY_REG_ACCESS_EXTERNAL	1
+#define I40E_AQ_PHY_REG_ACCESS_EXTERNAL_MODULE	2
+	u8	dev_addres;
+	u8	reserved1[2];
+	__le32	reg_address;
+	__le32	reg_value;
+	u8	reserved2[4];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_phy_register_access);
+
 /* NVM Read command (indirect 0x0701)
  * NVM Erase commands (direct 0x0702)
  * NVM Update commands (indirect 0x0703)
  */
 struct i40e_aqc_nvm_update {
 	u8	command_flags;
-#define I40E_AQ_NVM_LAST_CMD	0x01
-#define I40E_AQ_NVM_FLASH_ONLY	0x80
+#define I40E_AQ_NVM_LAST_CMD			0x01
+#define I40E_AQ_NVM_FLASH_ONLY			0x80
+#define I40E_AQ_NVM_PRESERVATION_FLAGS_SHIFT	1
+#define I40E_AQ_NVM_PRESERVATION_FLAGS_MASK	0x03
+#define I40E_AQ_NVM_PRESERVATION_FLAGS_SELECTED	0x03
+#define I40E_AQ_NVM_PRESERVATION_FLAGS_ALL	0x01
 	u8	module_pointer;
 	__le16	length;
 	__le32	offset;
@@ -2395,6 +2463,17 @@ struct i40e_aqc_lldp_start {
 
 I40E_CHECK_CMD_LENGTH(i40e_aqc_lldp_start);
 
+/* Set DCB (direct 0x0303) */
+struct i40e_aqc_set_dcb_parameters {
+	u8 command;
+#define I40E_AQ_DCB_SET_AGENT	0x1
+#define I40E_DCB_VALID		0x1
+	u8 valid_flags;
+	u8 reserved[14];
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_set_dcb_parameters);
+
 /* Get CEE DCBX Oper Config (0x0A07)
  * uses the generic descriptor struct
  * returns below as indirect response