X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Fbase%2Fixgbe_common.c;h=7f85713e9d118e10abc3a7488ccc36047d116cfd;hb=1e3a39f72d5d088cd3038241d799dd102e50f0d2;hp=0eb216636e99a9239eff29eab9aa3ffae106cc3c;hpb=8709f63782e46a921ddeb86dac75c9af24121f7d;p=dpdk.git diff --git a/drivers/net/ixgbe/base/ixgbe_common.c b/drivers/net/ixgbe/base/ixgbe_common.c index 0eb216636e..7f85713e9d 100644 --- a/drivers/net/ixgbe/base/ixgbe_common.c +++ b/drivers/net/ixgbe/base/ixgbe_common.c @@ -113,6 +113,7 @@ s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw) mac->ops.led_off = ixgbe_led_off_generic; mac->ops.blink_led_start = ixgbe_blink_led_start_generic; mac->ops.blink_led_stop = ixgbe_blink_led_stop_generic; + mac->ops.init_led_link_act = ixgbe_init_led_link_act_generic; /* RAR, Multicast, VLAN */ mac->ops.set_rar = ixgbe_set_rar_generic; @@ -168,16 +169,30 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) switch (hw->phy.media_type) { case ixgbe_media_type_fiber_qsfp: case ixgbe_media_type_fiber: - hw->mac.ops.check_link(hw, &speed, &link_up, false); - /* if link is down, assume supported */ - if (link_up) - supported = speed == IXGBE_LINK_SPEED_1GB_FULL ? + /* flow control autoneg black list */ + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_SFP: + case IXGBE_DEV_ID_X550EM_A_SFP_N: + case IXGBE_DEV_ID_X550EM_A_QSFP: + case IXGBE_DEV_ID_X550EM_A_QSFP_N: + supported = false; + break; + default: + hw->mac.ops.check_link(hw, &speed, &link_up, false); + /* if link is down, assume supported */ + if (link_up) + supported = speed == IXGBE_LINK_SPEED_1GB_FULL ? true : false; - else - supported = true; + else + supported = true; + } + break; case ixgbe_media_type_backplane: - supported = true; + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_XFI) + supported = false; + else + supported = true; break; case ixgbe_media_type_copper: /* only some copper devices support flow control autoneg */ @@ -200,9 +215,10 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) break; } - ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED, - "Device %x does not support flow control autoneg", - hw->device_id); + if (!supported) + ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED, + "Device %x does not support flow control autoneg", + hw->device_id); return supported; } @@ -397,8 +413,10 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) /* Setup flow control */ ret_val = ixgbe_setup_fc(hw); - if (ret_val != IXGBE_SUCCESS) - goto out; + if (ret_val != IXGBE_SUCCESS && ret_val != IXGBE_NOT_IMPLEMENTED) { + DEBUGOUT1("Flow control setup failed, returning %d\n", ret_val); + return ret_val; + } /* Cache bit indicating need for crosstalk fix */ switch (hw->mac.type) { @@ -419,8 +437,7 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) /* Clear adapter stopped flag */ hw->adapter_stopped = false; -out: - return ret_val; + return IXGBE_SUCCESS; } /** @@ -481,11 +498,18 @@ s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) /* Reset the hardware */ status = hw->mac.ops.reset_hw(hw); - if (status == IXGBE_SUCCESS) { + if (status == IXGBE_SUCCESS || status == IXGBE_ERR_SFP_NOT_PRESENT) { /* Start the HW */ status = hw->mac.ops.start_hw(hw); } + /* Initialize the LED link active for LED blink support */ + if (hw->mac.ops.init_led_link_act) + hw->mac.ops.init_led_link_act(hw); + + if (status != IXGBE_SUCCESS) + DEBUGOUT1("Failed to initialize HW, STATUS = %d\n", status); + return status; } @@ -1066,7 +1090,7 @@ void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP) { hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_4, &ee_ctrl_4); bus->instance_id = (ee_ctrl_4 & IXGBE_EE_CTRL_4_INST_ID) >> - IXGBE_EE_CTRL_4_INST_ID_SHIFT; + IXGBE_EE_CTRL_4_INST_ID_SHIFT; } } @@ -1124,6 +1148,47 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) return ixgbe_disable_pcie_master(hw); } +/** + * ixgbe_init_led_link_act_generic - Store the LED index link/activity. + * @hw: pointer to hardware structure + * + * Store the index for the link active LED. This will be used to support + * blinking the LED. + **/ +s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + u32 led_reg, led_mode; + u8 i; + + led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* Get LED link active from the LEDCTL register */ + for (i = 0; i < 4; i++) { + led_mode = led_reg >> IXGBE_LED_MODE_SHIFT(i); + + if ((led_mode & IXGBE_LED_MODE_MASK_BASE) == + IXGBE_LED_LINK_ACTIVE) { + mac->led_link_act = i; + return IXGBE_SUCCESS; + } + } + + /* + * If LEDCTL register does not have the LED link active set, then use + * known MAC defaults. + */ + switch (hw->mac.type) { + case ixgbe_mac_X550EM_a: + case ixgbe_mac_X550EM_x: + mac->led_link_act = 1; + break; + default: + mac->led_link_act = 2; + } + return IXGBE_SUCCESS; +} + /** * ixgbe_led_on_generic - Turns on the software controllable LEDs. * @hw: pointer to hardware structure @@ -2877,7 +2942,7 @@ out: * advertised settings **/ s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, - u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm) + u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm) { if ((!(adv_reg)) || (!(lp_reg))) { ERROR_REPORT3(IXGBE_ERROR_UNSUPPORTED, @@ -3349,7 +3414,7 @@ s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked) **/ s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw) { - int secrxreg; + u32 secrxreg; DEBUGFUNC("ixgbe_enable_sec_rx_path_generic"); @@ -3753,7 +3818,8 @@ s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) } /* was that the last pool using this rar? */ - if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) + if (mpsar_lo == 0 && mpsar_hi == 0 && + rar != 0 && rar != hw->mac.san_mac_rar_index) hw->mac.ops.clear_rar(hw, rar); done: return IXGBE_SUCCESS; @@ -3920,7 +3986,8 @@ s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, vfta_delta = 1 << (vlan % 32); vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regidx)); - /* vfta_delta represents the difference between the current value + /* + * vfta_delta represents the difference between the current value * of vfta and the value we want in the register. Since the diff * is an XOR mask we can just update the vfta using an XOR */ @@ -3953,7 +4020,7 @@ vfta_update: * @vind: VMDq output index that maps queue to VLAN id in VLVFB * @vlan_on: boolean flag to turn on/off VLAN in VLVF * @vfta_delta: pointer to the difference between the current value of VFTA - * and the desired value + * and the desired value * @vfta: the desired value of the VFTA * @vlvf_bypass: boolean flag indicating updating default pool is okay * @@ -3980,6 +4047,7 @@ s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, */ if (!(IXGBE_READ_REG(hw, IXGBE_VT_CTL) & IXGBE_VT_CTL_VT_ENABLE)) return IXGBE_SUCCESS; + vlvf_index = ixgbe_find_vlvf_slot(hw, vlan, vlvf_bypass); if (vlvf_index < 0) return vlvf_index; @@ -4009,6 +4077,7 @@ s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, return IXGBE_SUCCESS; } + /* If there are still bits set in the VLVFB registers * for the VLAN ID indicated we need to see if the * caller is requesting that we clear the VFTA entry bit. @@ -4170,7 +4239,7 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, break; case IXGBE_LINKS_SPEED_100_82599: *speed = IXGBE_LINK_SPEED_100_FULL; - if (hw->mac.type >= ixgbe_mac_X550) { + if (hw->mac.type == ixgbe_mac_X550) { if (links_reg & IXGBE_LINKS_SPEED_NON_STD) *speed = IXGBE_LINK_SPEED_5GB_FULL; } @@ -4581,13 +4650,15 @@ rel_out: * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. **/ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, - u8 build, u8 sub) + u8 build, u8 sub, u16 len, + const char *driver_ver) { struct ixgbe_hic_drv_info fw_cmd; int i; s32 ret_val = IXGBE_SUCCESS; DEBUGFUNC("ixgbe_set_fw_drv_ver_generic"); + UNREFERENCED_2PARAMETER(len, driver_ver); fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN; @@ -5049,14 +5120,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, speedcnt++; highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; - /* If we already have link at this speed, just jump out */ - status = ixgbe_check_link(hw, &link_speed, &link_up, false); - if (status != IXGBE_SUCCESS) - return status; - - if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up) - goto out; - /* Set the module link speed */ switch (hw->phy.media_type) { case ixgbe_media_type_fiber: @@ -5107,14 +5170,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; - /* If we already have link at this speed, just jump out */ - status = ixgbe_check_link(hw, &link_speed, &link_up, false); - if (status != IXGBE_SUCCESS) - return status; - - if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up) - goto out; - /* Set the module link speed */ switch (hw->phy.media_type) { case ixgbe_media_type_fiber: