X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Fbase%2Fixgbe_common.c;h=fb50719fb0d03c94443481de4ed1ea0fb9815271;hb=53dd95c10b1b9f5748d191becd710fbe531e378a;hp=d7b63c656f56faf9f634f42fb679cf9f1973c336;hpb=9db3087f4f77f559090ba8228fbc4840d811c007;p=dpdk.git

diff --git a/drivers/net/ixgbe/base/ixgbe_common.c b/drivers/net/ixgbe/base/ixgbe_common.c
index d7b63c656f..fb50719fb0 100644
--- a/drivers/net/ixgbe/base/ixgbe_common.c
+++ b/drivers/net/ixgbe/base/ixgbe_common.c
@@ -138,7 +138,6 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
 	DEBUGFUNC("ixgbe_device_supports_autoneg_fc");
 
 	switch (hw->phy.media_type) {
-	case ixgbe_media_type_fiber_fixed:
 	case ixgbe_media_type_fiber_qsfp:
 	case ixgbe_media_type_fiber:
 		/* flow control autoneg black list */
@@ -172,7 +171,6 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
 		case IXGBE_DEV_ID_82599_T3_LOM:
 		case IXGBE_DEV_ID_X540T:
 		case IXGBE_DEV_ID_X540T1:
-		case IXGBE_DEV_ID_X540_BYPASS:
 		case IXGBE_DEV_ID_X550T:
 		case IXGBE_DEV_ID_X550T1:
 		case IXGBE_DEV_ID_X550EM_X_10G_T:
@@ -238,7 +236,6 @@ s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw)
 			goto out;
 
 		/* fall through - only backplane uses autoc */
-	case ixgbe_media_type_fiber_fixed:
 	case ixgbe_media_type_fiber_qsfp:
 	case ixgbe_media_type_fiber:
 		reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
@@ -3098,7 +3095,6 @@ void ixgbe_fc_autoneg(struct ixgbe_hw *hw)
 
 	switch (hw->phy.media_type) {
 	/* Autoneg flow control on fiber adapters */
-	case ixgbe_media_type_fiber_fixed:
 	case ixgbe_media_type_fiber_qsfp:
 	case ixgbe_media_type_fiber:
 		if (speed == IXGBE_LINK_SPEED_1GB_FULL)
@@ -5238,7 +5234,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 
 		/* Set the module link speed */
 		switch (hw->phy.media_type) {
-		case ixgbe_media_type_fiber_fixed:
 		case ixgbe_media_type_fiber:
 			ixgbe_set_rate_select_speed(hw,
 						    IXGBE_LINK_SPEED_10GB_FULL);
@@ -5264,10 +5259,10 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 		ixgbe_flap_tx_laser(hw);
 
 		/* Wait for the controller to acquire link.  Per IEEE 802.3ap,
-		 * Section 73.10.2, we may have to wait up to 500ms if KR is
+		 * Section 73.10.2, we may have to wait up to 1000ms if KR is
 		 * attempted.  82599 uses the same timing for 10g SFI.
 		 */
-		for (i = 0; i < 5; i++) {
+		for (i = 0; i < 10; i++) {
 			/* Wait for the link partner to also set speed */
 			msec_delay(100);
 
@@ -5289,7 +5284,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 
 		/* Set the module link speed */
 		switch (hw->phy.media_type) {
-		case ixgbe_media_type_fiber_fixed:
 		case ixgbe_media_type_fiber:
 			ixgbe_set_rate_select_speed(hw,
 						    IXGBE_LINK_SPEED_1GB_FULL);