X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Fbase%2Fixgbe_x550.c;h=0011f210e8a620f0bab184ffa945036db725a7a6;hb=8ccdd7bf94a2654c2b6ed2ad6027deb146e99c08;hp=48077aec24a2680db408775798e09f6e69784dab;hpb=da431fd14d00af94deab1e1c078f8417a3732e1f;p=dpdk.git diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c index 48077aec24..0011f210e8 100644 --- a/drivers/net/ixgbe/base/ixgbe_x550.c +++ b/drivers/net/ixgbe/base/ixgbe_x550.c @@ -39,6 +39,9 @@ POSSIBILITY OF SUCH DAMAGE. #include "ixgbe_phy.h" STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed); +STATIC s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *, u32 mask); +STATIC void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *, u32 mask); +STATIC s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw); /** * ixgbe_init_ops_X550 - Inits func ptrs and MAC type @@ -59,7 +62,7 @@ s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw) mac->ops.dmac_config = ixgbe_dmac_config_X550; mac->ops.dmac_config_tcs = ixgbe_dmac_config_tcs_X550; mac->ops.dmac_update_tcs = ixgbe_dmac_update_tcs_X550; - mac->ops.setup_eee = ixgbe_setup_eee_X550; + mac->ops.setup_eee = NULL; mac->ops.set_source_address_pruning = ixgbe_set_source_address_pruning_X550; mac->ops.set_ethertype_anti_spoofing = @@ -80,9 +83,16 @@ s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw) mac->ops.mdd_event = ixgbe_mdd_event_X550; mac->ops.restore_mdd_vf = ixgbe_restore_mdd_vf_X550; mac->ops.disable_rx = ixgbe_disable_rx_x550; - if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) { + /* Manageability interface */ + mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_x550; + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_10G_T: + case IXGBE_DEV_ID_X550EM_A_10G_T: hw->mac.ops.led_on = ixgbe_led_on_t_X550em; hw->mac.ops.led_off = ixgbe_led_off_t_X550em; + break; + default: + break; } return ret_val; } @@ -97,7 +107,7 @@ s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw) **/ STATIC s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value) { - return ixgbe_read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, value); + return hw->link.ops.read_link_unlocked(hw, hw->link.addr, reg, value); } /** @@ -110,133 +120,7 @@ STATIC s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value) **/ STATIC s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value) { - return ixgbe_write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, value); -} - -/** - * ixgbe_get_cs4227_status - Return CS4227 status - * @hw: pointer to hardware structure - * - * Performs a diagnostic on the CS4227 chip. Returns an error if it is - * not operating correctly. - * This function assumes that the caller has acquired the proper semaphore. - **/ -STATIC s32 ixgbe_get_cs4227_status(struct ixgbe_hw *hw) -{ - s32 status; - u16 value = 0; - u16 reg_slice, reg_val; - u8 retry; - - /* Check register reads. */ - for (retry = 0; retry < IXGBE_CS4227_RETRIES; ++retry) { - status = ixgbe_read_cs4227(hw, IXGBE_CS4227_GLOBAL_ID_LSB, - &value); - if (status != IXGBE_SUCCESS) - return status; - if (value == IXGBE_CS4227_GLOBAL_ID_VALUE) - break; - msec_delay(IXGBE_CS4227_CHECK_DELAY); - } - if (value != IXGBE_CS4227_GLOBAL_ID_VALUE) - return IXGBE_ERR_PHY; - - status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); - if (status != IXGBE_SUCCESS) - return status; - - /* If this is the first time after power-on, check the ucode. - * Otherwise, this will disrupt link on all ports. Because we - * can only do this the first time, we must check all ports, - * not just our own. - * While we are at it, set the LINE side to 10G SR, which is - * what it needs to be regardless of the actual link. - */ - if (value != IXGBE_CS4227_SCRATCH_VALUE) { - reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB; - reg_val = IXGBE_CS4227_SPEED_10G; - status = ixgbe_write_cs4227(hw, reg_slice, reg_val); - if (status != IXGBE_SUCCESS) - return status; - - reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB; - reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; - status = ixgbe_write_cs4227(hw, reg_slice, reg_val); - if (status != IXGBE_SUCCESS) - return status; - - reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB; - reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; - status = ixgbe_write_cs4227(hw, reg_slice, reg_val); - if (status != IXGBE_SUCCESS) - return status; - - reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB + (1 << 12); - reg_val = IXGBE_CS4227_SPEED_10G; - status = ixgbe_write_cs4227(hw, reg_slice, reg_val); - if (status != IXGBE_SUCCESS) - return status; - - reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (1 << 12); - reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; - status = ixgbe_write_cs4227(hw, reg_slice, reg_val); - if (status != IXGBE_SUCCESS) - return status; - - reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB + (1 << 12); - reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; - status = ixgbe_write_cs4227(hw, reg_slice, reg_val); - if (status != IXGBE_SUCCESS) - return status; - - msec_delay(10); - } - - /* Verify that the ucode is operational on all ports. */ - reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB; - reg_val = 0xFFFF; - status = ixgbe_read_cs4227(hw, reg_slice, ®_val); - if (status != IXGBE_SUCCESS) - return status; - if (reg_val != 0) - return IXGBE_ERR_PHY; - - reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB; - reg_val = 0xFFFF; - status = ixgbe_read_cs4227(hw, reg_slice, ®_val); - if (status != IXGBE_SUCCESS) - return status; - if (reg_val != 0) - return IXGBE_ERR_PHY; - - reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (1 << 12); - reg_val = 0xFFFF; - status = ixgbe_read_cs4227(hw, reg_slice, ®_val); - if (status != IXGBE_SUCCESS) - return status; - if (reg_val != 0) - return IXGBE_ERR_PHY; - - reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB + (1 << 12); - reg_val = 0xFFFF; - status = ixgbe_read_cs4227(hw, reg_slice, ®_val); - if (status != IXGBE_SUCCESS) - return status; - if (reg_val != 0) - return IXGBE_ERR_PHY; - - /* Set scratch indicating that the diagnostic was successful. */ - status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, - IXGBE_CS4227_SCRATCH_VALUE); - if (status != IXGBE_SUCCESS) - return status; - status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); - if (status != IXGBE_SUCCESS) - return status; - if (value != IXGBE_CS4227_SCRATCH_VALUE) - return IXGBE_ERR_PHY; - - return IXGBE_SUCCESS; + return hw->link.ops.write_link_unlocked(hw, hw->link.addr, reg, value); } /** @@ -281,13 +165,17 @@ STATIC s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value) * ixgbe_reset_cs4227 - Reset CS4227 using port expander * @hw: pointer to hardware structure * + * This function assumes that the caller has acquired the proper semaphore. * Returns error code **/ STATIC s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) { s32 status; + u32 retry; + u16 value; u8 reg; + /* Trigger hard reset. */ status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); if (status != IXGBE_SUCCESS) return status; @@ -322,7 +210,29 @@ STATIC s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) if (status != IXGBE_SUCCESS) return status; + /* Wait for the reset to complete. */ msec_delay(IXGBE_CS4227_RESET_DELAY); + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS, + &value); + if (status == IXGBE_SUCCESS && + value == IXGBE_CS4227_EEPROM_LOAD_OK) + break; + msec_delay(IXGBE_CS4227_CHECK_DELAY); + } + if (retry == IXGBE_CS4227_RETRIES) { + ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE, + "CS4227 reset did not complete."); + return IXGBE_ERR_PHY; + } + + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value); + if (status != IXGBE_SUCCESS || + !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) { + ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE, + "CS4227 EEPROM did not load successfully."); + return IXGBE_ERR_PHY; + } return IXGBE_SUCCESS; } @@ -333,29 +243,75 @@ STATIC s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) **/ STATIC void ixgbe_check_cs4227(struct ixgbe_hw *hw) { + s32 status = IXGBE_SUCCESS; u32 swfw_mask = hw->phy.phy_semaphore_mask; - s32 status; + u16 value = 0; u8 retry; for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); if (status != IXGBE_SUCCESS) { ERROR_REPORT2(IXGBE_ERROR_CAUTION, - "semaphore failed with %d\n", status); - return; + "semaphore failed with %d", status); + msec_delay(IXGBE_CS4227_CHECK_DELAY); + continue; } - status = ixgbe_get_cs4227_status(hw); - if (status == IXGBE_SUCCESS) { - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - msec_delay(hw->eeprom.semaphore_delay); + + /* Get status of reset flow. */ + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); + + if (status == IXGBE_SUCCESS && + value == IXGBE_CS4227_RESET_COMPLETE) + goto out; + + if (status != IXGBE_SUCCESS || + value != IXGBE_CS4227_RESET_PENDING) + break; + + /* Reset is pending. Wait and check again. */ + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msec_delay(IXGBE_CS4227_CHECK_DELAY); + } + + /* If still pending, assume other instance failed. */ + if (retry == IXGBE_CS4227_RETRIES) { + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status != IXGBE_SUCCESS) { + ERROR_REPORT2(IXGBE_ERROR_CAUTION, + "semaphore failed with %d", status); return; } - ixgbe_reset_cs4227(hw); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - msec_delay(hw->eeprom.semaphore_delay); } - ERROR_REPORT2(IXGBE_ERROR_CAUTION, - "Unable to initialize CS4227, err=%d\n", status); + + /* Reset the CS4227. */ + status = ixgbe_reset_cs4227(hw); + if (status != IXGBE_SUCCESS) { + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "CS4227 reset failed: %d", status); + goto out; + } + + /* Reset takes so long, temporarily release semaphore in case the + * other driver instance is waiting for the reset indication. + */ + ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_PENDING); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msec_delay(10); + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status != IXGBE_SUCCESS) { + ERROR_REPORT2(IXGBE_ERROR_CAUTION, + "semaphore failed with %d", status); + return; + } + + /* Record completion for next time. */ + status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_COMPLETE); + +out: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msec_delay(hw->eeprom.semaphore_delay); } /** @@ -375,6 +331,98 @@ STATIC void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw) IXGBE_WRITE_FLUSH(hw); } +/** + * ixgbe_read_phy_reg_mdi_22 - Read from a clause 22 PHY register without lock + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @dev_type: always unused + * @phy_data: Pointer to read data from PHY register + */ +STATIC s32 ixgbe_read_phy_reg_mdi_22(struct ixgbe_hw *hw, u32 reg_addr, + u32 dev_type, u16 *phy_data) +{ + u32 i, data, command; + UNREFERENCED_1PARAMETER(dev_type); + + /* Setup and write the read command */ + command = (reg_addr << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + IXGBE_MSCA_OLD_PROTOCOL | IXGBE_MSCA_READ_AUTOINC | + IXGBE_MSCA_MDI_COMMAND; + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* Check every 10 usec to see if the access completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + usec_delay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if (!(command & IXGBE_MSCA_MDI_COMMAND)) + break; + } + + if (command & IXGBE_MSCA_MDI_COMMAND) { + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "PHY read command did not complete.\n"); + return IXGBE_ERR_PHY; + } + + /* Read operation is complete. Get the data from MSRWD */ + data = IXGBE_READ_REG(hw, IXGBE_MSRWD); + data >>= IXGBE_MSRWD_READ_DATA_SHIFT; + *phy_data = (u16)data; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_write_phy_reg_mdi_22 - Write to a clause 22 PHY register without lock + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @dev_type: always unused + * @phy_data: Data to write to the PHY register + */ +STATIC s32 ixgbe_write_phy_reg_mdi_22(struct ixgbe_hw *hw, u32 reg_addr, + u32 dev_type, u16 phy_data) +{ + u32 i, command; + UNREFERENCED_1PARAMETER(dev_type); + + /* Put the data in the MDI single read and write data register*/ + IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); + + /* Setup and write the write command */ + command = (reg_addr << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | + IXGBE_MSCA_OLD_PROTOCOL | IXGBE_MSCA_WRITE | + IXGBE_MSCA_MDI_COMMAND; + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* Check every 10 usec to see if the access completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + usec_delay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + if (!(command & IXGBE_MSCA_MDI_COMMAND)) + break; + } + + if (command & IXGBE_MSCA_MDI_COMMAND) { + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "PHY write cmd didn't complete\n"); + return IXGBE_ERR_PHY; + } + + return IXGBE_SUCCESS; +} + /** * ixgbe_identify_phy_x550em - Get PHY type based on device id * @hw: pointer to hardware structure @@ -383,30 +431,177 @@ STATIC void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw) */ STATIC s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) { + hw->mac.ops.set_lan_id(hw); + + ixgbe_read_mng_if_sel_x550em(hw); + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_SFP: + return ixgbe_identify_module_generic(hw); case IXGBE_DEV_ID_X550EM_X_SFP: /* set up for CS4227 usage */ - hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; ixgbe_setup_mux_ctl(hw); ixgbe_check_cs4227(hw); + /* Fallthrough */ + case IXGBE_DEV_ID_X550EM_A_SFP_N: return ixgbe_identify_module_generic(hw); break; case IXGBE_DEV_ID_X550EM_X_KX4: hw->phy.type = ixgbe_phy_x550em_kx4; break; case IXGBE_DEV_ID_X550EM_X_KR: + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: hw->phy.type = ixgbe_phy_x550em_kr; break; + case IXGBE_DEV_ID_X550EM_A_10G_T: case IXGBE_DEV_ID_X550EM_X_1G_T: case IXGBE_DEV_ID_X550EM_X_10G_T: return ixgbe_identify_phy_generic(hw); + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: + hw->phy.type = ixgbe_phy_fw; + hw->phy.ops.read_reg = NULL; + hw->phy.ops.write_reg = NULL; + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM; + break; default: break; } return IXGBE_SUCCESS; } +/** + * ixgbe_fw_phy_activity - Perform an activity on a PHY + * @hw: pointer to hardware structure + * @activity: activity to perform + * @data: Pointer to 4 32-bit words of data + */ +s32 ixgbe_fw_phy_activity(struct ixgbe_hw *hw, u16 activity, + u32 (*data)[FW_PHY_ACT_DATA_COUNT]) +{ + union { + struct ixgbe_hic_phy_activity_req cmd; + struct ixgbe_hic_phy_activity_resp rsp; + } hic; + u16 retries = FW_PHY_ACT_RETRIES; + s32 rc; + u16 i; + + do { + memset(&hic, 0, sizeof(hic)); + hic.cmd.hdr.cmd = FW_PHY_ACT_REQ_CMD; + hic.cmd.hdr.buf_len = FW_PHY_ACT_REQ_LEN; + hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + hic.cmd.port_number = hw->bus.lan_id; + hic.cmd.activity_id = IXGBE_CPU_TO_LE16(activity); + for (i = 0; i < FW_PHY_ACT_DATA_COUNT; ++i) + hic.cmd.data[i] = IXGBE_CPU_TO_BE32((*data)[i]); + + rc = ixgbe_host_interface_command(hw, (u32 *)&hic.cmd, + sizeof(hic.cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); + if (rc != IXGBE_SUCCESS) + return rc; + if (hic.rsp.hdr.cmd_or_resp.ret_status == + FW_CEM_RESP_STATUS_SUCCESS) { + for (i = 0; i < FW_PHY_ACT_DATA_COUNT; ++i) + (*data)[i] = IXGBE_BE32_TO_CPU(hic.rsp.data[i]); + return IXGBE_SUCCESS; + } + usec_delay(20); + --retries; + } while (retries > 0); + + return IXGBE_ERR_HOST_INTERFACE_COMMAND; +} + +static const struct { + u16 fw_speed; + ixgbe_link_speed phy_speed; +} ixgbe_fw_map[] = { + { FW_PHY_ACT_LINK_SPEED_10, IXGBE_LINK_SPEED_10_FULL }, + { FW_PHY_ACT_LINK_SPEED_100, IXGBE_LINK_SPEED_100_FULL }, + { FW_PHY_ACT_LINK_SPEED_1G, IXGBE_LINK_SPEED_1GB_FULL }, + { FW_PHY_ACT_LINK_SPEED_2_5G, IXGBE_LINK_SPEED_2_5GB_FULL }, + { FW_PHY_ACT_LINK_SPEED_5G, IXGBE_LINK_SPEED_5GB_FULL }, + { FW_PHY_ACT_LINK_SPEED_10G, IXGBE_LINK_SPEED_10GB_FULL }, +}; + +/** + * ixgbe_get_phy_id_fw - Get the phy ID via firmware command + * @hw: pointer to hardware structure + * + * Returns error code + */ +static s32 ixgbe_get_phy_id_fw(struct ixgbe_hw *hw) +{ + u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 }; + u16 phy_speeds; + u16 phy_id_lo; + s32 rc; + u16 i; + + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_PHY_INFO, &info); + if (rc) + return rc; + + hw->phy.speeds_supported = 0; + phy_speeds = info[0] & FW_PHY_INFO_SPEED_MASK; + for (i = 0; i < sizeof(ixgbe_fw_map) / sizeof(ixgbe_fw_map[0]); ++i) { + if (phy_speeds & ixgbe_fw_map[i].fw_speed) + hw->phy.speeds_supported |= ixgbe_fw_map[i].phy_speed; + } + if (!hw->phy.autoneg_advertised) + hw->phy.autoneg_advertised = hw->phy.speeds_supported; + + hw->phy.id = info[0] & FW_PHY_INFO_ID_HI_MASK; + phy_id_lo = info[1] & FW_PHY_INFO_ID_LO_MASK; + hw->phy.id |= phy_id_lo & IXGBE_PHY_REVISION_MASK; + hw->phy.revision = phy_id_lo & ~IXGBE_PHY_REVISION_MASK; + if (!hw->phy.id || hw->phy.id == IXGBE_PHY_REVISION_MASK) + return IXGBE_ERR_PHY_ADDR_INVALID; + return IXGBE_SUCCESS; +} + +/** + * ixgbe_identify_phy_fw - Get PHY type based on firmware command + * @hw: pointer to hardware structure + * + * Returns error code + */ +static s32 ixgbe_identify_phy_fw(struct ixgbe_hw *hw) +{ + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; + + hw->phy.type = ixgbe_phy_fw; + hw->phy.ops.read_reg = NULL; + hw->phy.ops.write_reg = NULL; + return ixgbe_get_phy_id_fw(hw); +} + +/** + * ixgbe_shutdown_fw_phy - Shutdown a firmware-controlled PHY + * @hw: pointer to hardware structure + * + * Returns error code + */ +s32 ixgbe_shutdown_fw_phy(struct ixgbe_hw *hw) +{ + u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 }; + + setup[0] = FW_PHY_ACT_FORCE_LINK_DOWN_OFF; + return ixgbe_fw_phy_activity(hw, FW_PHY_ACT_FORCE_LINK_DOWN, &setup); +} + STATIC s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data) { @@ -421,6 +616,68 @@ STATIC s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr, return IXGBE_NOT_IMPLEMENTED; } +/** + * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * + * Returns an error code on error. + **/ +STATIC s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val) +{ + return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true); +} + +/** + * ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * + * Returns an error code on error. + **/ +STATIC s32 +ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val) +{ + return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false); +} + +/** + * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * + * Returns an error code on error. + **/ +STATIC s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, + u8 addr, u16 reg, u16 val) +{ + return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true); +} + +/** + * ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * + * Returns an error code on error. + **/ +STATIC s32 +ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, + u8 addr, u16 reg, u16 val) +{ + return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false); +} + /** * ixgbe_init_ops_X550EM - Inits func ptrs and MAC type * @hw: pointer to hardware structure @@ -468,8 +725,7 @@ s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw) hw->bus.type = ixgbe_bus_type_internal; mac->ops.get_bus_info = ixgbe_get_bus_info_X550em; - mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550; - mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550; + mac->ops.get_media_type = ixgbe_get_media_type_X550em; mac->ops.setup_sfp = ixgbe_setup_sfp_modules_X550em; mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_X550em; @@ -482,15 +738,20 @@ s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw) else mac->ops.setup_fc = ixgbe_setup_fc_X550em; - mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em; - mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em; - - if (hw->device_id != IXGBE_DEV_ID_X550EM_X_KR) - mac->ops.setup_eee = NULL; - /* PHY */ phy->ops.init = ixgbe_init_phy_ops_X550em; - phy->ops.identify = ixgbe_identify_phy_x550em; + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: + mac->ops.setup_fc = NULL; + phy->ops.identify = ixgbe_identify_phy_fw; + phy->ops.set_phy_power = NULL; + phy->ops.get_firmware_version = NULL; + break; + default: + phy->ops.identify = ixgbe_identify_phy_x550em; + } + if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper) phy->ops.set_phy_power = NULL; @@ -508,6 +769,183 @@ s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw) return ret_val; } +/** + * ixgbe_setup_fw_link - Setup firmware-controlled PHYs + * @hw: pointer to hardware structure + */ +static s32 ixgbe_setup_fw_link(struct ixgbe_hw *hw) +{ + u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 }; + s32 rc; + u16 i; + + if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw)) + return 0; + + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } + + switch (hw->fc.requested_mode) { + case ixgbe_fc_full: + setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RXTX << + FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; + break; + case ixgbe_fc_rx_pause: + setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RX << + FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; + break; + case ixgbe_fc_tx_pause: + setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_TX << + FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; + break; + default: + break; + } + + for (i = 0; i < sizeof(ixgbe_fw_map) / sizeof(ixgbe_fw_map[0]); ++i) { + if (hw->phy.autoneg_advertised & ixgbe_fw_map[i].phy_speed) + setup[0] |= ixgbe_fw_map[i].fw_speed; + } + setup[0] |= FW_PHY_ACT_SETUP_LINK_HP | FW_PHY_ACT_SETUP_LINK_AN; + + if (hw->phy.eee_speeds_advertised) + setup[0] |= FW_PHY_ACT_SETUP_LINK_EEE; + + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_SETUP_LINK, &setup); + if (rc) + return rc; + if (setup[0] == FW_PHY_ACT_SETUP_LINK_RSP_DOWN) + return IXGBE_ERR_OVERTEMP; + return IXGBE_SUCCESS; +} + +/** + * ixgbe_fc_autoneg_fw _ Set up flow control for FW-controlled PHYs + * @hw: pointer to hardware structure + * + * Called at init time to set up flow control. + */ +static s32 ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw) +{ + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; + + return ixgbe_setup_fw_link(hw); +} + +/** + * ixgbe_setup_eee_fw - Enable/disable EEE support + * @hw: pointer to the HW structure + * @enable_eee: boolean flag to enable EEE + * + * Enable/disable EEE based on enable_eee flag. + * This function controls EEE for firmware-based PHY implementations. + */ +static s32 ixgbe_setup_eee_fw(struct ixgbe_hw *hw, bool enable_eee) +{ + if (!!hw->phy.eee_speeds_advertised == enable_eee) + return IXGBE_SUCCESS; + if (enable_eee) + hw->phy.eee_speeds_advertised = hw->phy.eee_speeds_supported; + else + hw->phy.eee_speeds_advertised = 0; + return hw->phy.ops.setup_link(hw); +} + +/** +* ixgbe_init_ops_X550EM_a - Inits func ptrs and MAC type +* @hw: pointer to hardware structure +* +* Initialize the function pointers and for MAC type X550EM_a. +* Does not touch the hardware. +**/ +s32 ixgbe_init_ops_X550EM_a(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + s32 ret_val; + + DEBUGFUNC("ixgbe_init_ops_X550EM_a"); + + /* Start with generic X550EM init */ + ret_val = ixgbe_init_ops_X550EM(hw); + + if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII || + hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L) { + mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550; + mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550; + } else { + mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550a; + mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550a; + } + mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550a; + mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550a; + + switch (mac->ops.get_media_type(hw)) { + case ixgbe_media_type_fiber: + mac->ops.setup_fc = NULL; + mac->ops.fc_autoneg = ixgbe_fc_autoneg_fiber_x550em_a; + break; + case ixgbe_media_type_backplane: + mac->ops.fc_autoneg = ixgbe_fc_autoneg_backplane_x550em_a; + mac->ops.setup_fc = ixgbe_setup_fc_backplane_x550em_a; + break; + default: + break; + } + + if ((hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T) || + (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L)) { + mac->ops.fc_autoneg = ixgbe_fc_autoneg_sgmii_x550em_a; + mac->ops.setup_fc = ixgbe_fc_autoneg_fw; + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: + mac->ops.setup_eee = ixgbe_setup_eee_fw; + break; + default: + mac->ops.setup_eee = NULL; + } + + return ret_val; +} + +/** +* ixgbe_init_ops_X550EM_x - Inits func ptrs and MAC type +* @hw: pointer to hardware structure +* +* Initialize the function pointers and for MAC type X550EM_x. +* Does not touch the hardware. +**/ +s32 ixgbe_init_ops_X550EM_x(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_link_info *link = &hw->link; + s32 ret_val; + + DEBUGFUNC("ixgbe_init_ops_X550EM_x"); + + /* Start with generic X550EM init */ + ret_val = ixgbe_init_ops_X550EM(hw); + + mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550; + mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550; + mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em; + mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em; + link->ops.read_link = ixgbe_read_i2c_combined_generic; + link->ops.read_link_unlocked = ixgbe_read_i2c_combined_generic_unlocked; + link->ops.write_link = ixgbe_write_i2c_combined_generic; + link->ops.write_link_unlocked = + ixgbe_write_i2c_combined_generic_unlocked; + link->addr = IXGBE_CS4227; + + return ret_val; +} + /** * ixgbe_dmac_config_X550 * @hw: pointer to hardware structure @@ -571,6 +1009,7 @@ s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw) /* Configure DMA coalescing enabled */ switch (hw->mac.dmac_config.link_speed) { + case IXGBE_LINK_SPEED_10_FULL: case IXGBE_LINK_SPEED_100_FULL: pb_headroom = IXGBE_DMACRXT_100M; break; @@ -653,18 +1092,93 @@ s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw) DEBUGFUNC("ixgbe_init_eeprom_params_X550"); - if (eeprom->type == ixgbe_eeprom_uninitialized) { - eeprom->semaphore_delay = 10; - eeprom->type = ixgbe_flash; + if (eeprom->type == ixgbe_eeprom_uninitialized) { + eeprom->semaphore_delay = 10; + eeprom->type = ixgbe_flash; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> + IXGBE_EEC_SIZE_SHIFT); + eeprom->word_size = 1 << (eeprom_size + + IXGBE_EEPROM_WORD_SIZE_SHIFT); + + DEBUGOUT2("Eeprom params: type = %d, size = %d\n", + eeprom->type, eeprom->word_size); + } + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_enable_eee_x550 - Enable EEE support + * @hw: pointer to hardware structure + */ +STATIC s32 ixgbe_enable_eee_x550(struct ixgbe_hw *hw) +{ + u32 link_reg; + s32 status; + + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg); + if (status != IXGBE_SUCCESS) + return status; + + link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR | + IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX; + + /* Don't advertise FEC capability when EEE enabled. */ + link_reg &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC; + + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg); + if (status != IXGBE_SUCCESS) + return status; + break; + default: + break; + } + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_disable_eee_x550 - Disable EEE support + * @hw: pointer to hardware structure + */ +STATIC s32 ixgbe_disable_eee_x550(struct ixgbe_hw *hw) +{ + u32 link_reg; + s32 status; + + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_KR: + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg); + if (status != IXGBE_SUCCESS) + return status; + + link_reg &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR | + IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX); - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> - IXGBE_EEC_SIZE_SHIFT); - eeprom->word_size = 1 << (eeprom_size + - IXGBE_EEPROM_WORD_SIZE_SHIFT); + /* Advertise FEC capability when EEE is disabled. */ + link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC; - DEBUGOUT2("Eeprom params: type = %d, size = %d\n", - eeprom->type, eeprom->word_size); + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg); + if (status != IXGBE_SUCCESS) + return status; + break; + default: + break; } return IXGBE_SUCCESS; @@ -682,11 +1196,8 @@ s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw) **/ s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee) { - u32 eeer; - u16 autoneg_eee_reg; - u32 link_reg; s32 status; - u32 fuse; + u32 eeer; DEBUGFUNC("ixgbe_setup_eee_X550"); @@ -695,74 +1206,15 @@ s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee) if (enable_eee) { eeer |= (IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN); - if (hw->device_id == IXGBE_DEV_ID_X550T) { - /* Advertise EEE capability */ - hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg); - - autoneg_eee_reg |= (IXGBE_AUTO_NEG_10GBASE_EEE_ADVT | - IXGBE_AUTO_NEG_1000BASE_EEE_ADVT | - IXGBE_AUTO_NEG_100BASE_EEE_ADVT); - - hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg); - } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) { - /* Not supported on first revision. */ - fuse = IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)); - if (!(fuse & IXGBE_FUSES0_REV1)) - return IXGBE_SUCCESS; - - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg); - if (status != IXGBE_SUCCESS) - return status; - - link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR | - IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX; - - /* Don't advertise FEC capability when EEE enabled. */ - link_reg &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC; - - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg); - if (status != IXGBE_SUCCESS) - return status; - } + status = ixgbe_enable_eee_x550(hw); + if (status) + return status; } else { eeer &= ~(IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN); - if (hw->device_id == IXGBE_DEV_ID_X550T) { - /* Disable advertised EEE capability */ - hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg); - - autoneg_eee_reg &= ~(IXGBE_AUTO_NEG_10GBASE_EEE_ADVT | - IXGBE_AUTO_NEG_1000BASE_EEE_ADVT | - IXGBE_AUTO_NEG_100BASE_EEE_ADVT); - - hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg); - } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) { - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg); - if (status != IXGBE_SUCCESS) - return status; - - link_reg &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR | - IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX); - - /* Advertise FEC capability when EEE is disabled. */ - link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC; - - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg); - if (status != IXGBE_SUCCESS) - return status; - } + status = ixgbe_disable_eee_x550(hw); + if (status) + return status; } IXGBE_WRITE_REG(hw, IXGBE_EEER, eeer); @@ -855,8 +1307,8 @@ STATIC s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl) } /** - * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF - * device + * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register + * of the IOSF device * @hw: pointer to hardware structure * @reg_addr: 32 bit PHY register to write * @device_type: 3 bit device type @@ -902,12 +1354,11 @@ out: } /** - * ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF - * device + * ixgbe_read_iosf_sb_reg_x550 - Reads specified register of the IOSF device * @hw: pointer to hardware structure * @reg_addr: 32 bit PHY register to write * @device_type: 3 bit device type - * @phy_data: Pointer to read data from the register + * @data: Pointer to read data from the register **/ s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u32 *data) @@ -948,6 +1399,133 @@ out: return ret; } +/** + * ixgbe_get_phy_token - Get the token for shared phy access + * @hw: Pointer to hardware structure + */ + +s32 ixgbe_get_phy_token(struct ixgbe_hw *hw) +{ + struct ixgbe_hic_phy_token_req token_cmd; + s32 status; + + token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD; + token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN; + token_cmd.hdr.cmd_or_resp.cmd_resv = 0; + token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + token_cmd.port_number = hw->bus.lan_id; + token_cmd.command_type = FW_PHY_TOKEN_REQ; + token_cmd.pad = 0; + status = ixgbe_host_interface_command(hw, (u32 *)&token_cmd, + sizeof(token_cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); + if (status) + return status; + if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK) + return IXGBE_SUCCESS; + if (token_cmd.hdr.cmd_or_resp.ret_status != FW_PHY_TOKEN_RETRY) + return IXGBE_ERR_FW_RESP_INVALID; + + return IXGBE_ERR_TOKEN_RETRY; +} + +/** + * ixgbe_put_phy_token - Put the token for shared phy access + * @hw: Pointer to hardware structure + */ + +s32 ixgbe_put_phy_token(struct ixgbe_hw *hw) +{ + struct ixgbe_hic_phy_token_req token_cmd; + s32 status; + + token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD; + token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN; + token_cmd.hdr.cmd_or_resp.cmd_resv = 0; + token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + token_cmd.port_number = hw->bus.lan_id; + token_cmd.command_type = FW_PHY_TOKEN_REL; + token_cmd.pad = 0; + status = ixgbe_host_interface_command(hw, (u32 *)&token_cmd, + sizeof(token_cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); + if (status) + return status; + if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK) + return IXGBE_SUCCESS; + + DEBUGOUT("Put PHY Token host interface command failed"); + return IXGBE_ERR_FW_RESP_INVALID; +} + +/** + * ixgbe_write_iosf_sb_reg_x550a - Writes a value to specified register + * of the IOSF device + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @data: Data to write to the register + **/ +s32 ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u32 data) +{ + struct ixgbe_hic_internal_phy_req write_cmd; + s32 status; + UNREFERENCED_1PARAMETER(device_type); + + memset(&write_cmd, 0, sizeof(write_cmd)); + write_cmd.hdr.cmd = FW_INT_PHY_REQ_CMD; + write_cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN; + write_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + write_cmd.port_number = hw->bus.lan_id; + write_cmd.command_type = FW_INT_PHY_REQ_WRITE; + write_cmd.address = IXGBE_CPU_TO_BE16(reg_addr); + write_cmd.write_data = IXGBE_CPU_TO_BE32(data); + + status = ixgbe_host_interface_command(hw, (u32 *)&write_cmd, + sizeof(write_cmd), + IXGBE_HI_COMMAND_TIMEOUT, false); + + return status; +} + +/** + * ixgbe_read_iosf_sb_reg_x550a - Reads specified register of the IOSF device + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @data: Pointer to read data from the register + **/ +s32 ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u32 *data) +{ + union { + struct ixgbe_hic_internal_phy_req cmd; + struct ixgbe_hic_internal_phy_resp rsp; + } hic; + s32 status; + UNREFERENCED_1PARAMETER(device_type); + + memset(&hic, 0, sizeof(hic)); + hic.cmd.hdr.cmd = FW_INT_PHY_REQ_CMD; + hic.cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN; + hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + hic.cmd.port_number = hw->bus.lan_id; + hic.cmd.command_type = FW_INT_PHY_REQ_READ; + hic.cmd.address = IXGBE_CPU_TO_BE16(reg_addr); + + status = ixgbe_host_interface_command(hw, (u32 *)&hic.cmd, + sizeof(hic.cmd), + IXGBE_HI_COMMAND_TIMEOUT, true); + + /* Extract the register value from the response. */ + *data = IXGBE_BE32_TO_CPU(hic.rsp.read_data); + + return status; +} + /** * ixgbe_disable_mdd_X550 * @hw: pointer to hardware structure @@ -1107,13 +1685,29 @@ enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw) switch (hw->device_id) { case IXGBE_DEV_ID_X550EM_X_KR: case IXGBE_DEV_ID_X550EM_X_KX4: + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: media_type = ixgbe_media_type_backplane; break; case IXGBE_DEV_ID_X550EM_X_SFP: + case IXGBE_DEV_ID_X550EM_A_SFP: + case IXGBE_DEV_ID_X550EM_A_SFP_N: + case IXGBE_DEV_ID_X550EM_A_QSFP: + case IXGBE_DEV_ID_X550EM_A_QSFP_N: media_type = ixgbe_media_type_fiber; break; case IXGBE_DEV_ID_X550EM_X_1G_T: case IXGBE_DEV_ID_X550EM_X_10G_T: + case IXGBE_DEV_ID_X550EM_A_10G_T: + media_type = ixgbe_media_type_copper; + break; + case IXGBE_DEV_ID_X550EM_A_SGMII: + case IXGBE_DEV_ID_X550EM_A_SGMII_L: + media_type = ixgbe_media_type_backplane; + hw->phy.type = ixgbe_phy_sgmii; + break; + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: media_type = ixgbe_media_type_copper; break; default: @@ -1206,6 +1800,191 @@ s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) return IXGBE_SUCCESS; } +/** +* ixgbe_restart_an_internal_phy_x550em - restart autonegotiation for the +* internal PHY +* @hw: pointer to hardware structure +**/ +STATIC s32 ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw *hw) +{ + s32 status; + u32 link_ctrl; + + /* Restart auto-negotiation. */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &link_ctrl); + + if (status) { + DEBUGOUT("Auto-negotiation did not complete\n"); + return status; + } + + link_ctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, link_ctrl); + + if (hw->mac.type == ixgbe_mac_X550EM_a) { + u32 flx_mask_st20; + + /* Indicate to FW that AN restart has been asserted */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_mask_st20); + + if (status) { + DEBUGOUT("Auto-negotiation did not complete\n"); + return status; + } + + flx_mask_st20 |= IXGBE_KRM_PMD_FLX_MASK_ST20_FW_AN_RESTART; + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, flx_mask_st20); + } + + return status; +} + +/** + * ixgbe_setup_sgmii - Set up link for sgmii + * @hw: pointer to hardware structure + */ +STATIC s32 ixgbe_setup_sgmii(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg_wait) +{ + struct ixgbe_mac_info *mac = &hw->mac; + u32 lval, sval, flx_val; + s32 rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &lval); + if (rc) + return rc; + + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, lval); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &sval); + if (rc) + return rc; + + sval |= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D; + sval |= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D; + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, sval); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val); + if (rc) + return rc; + + flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G; + flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; + + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val); + if (rc) + return rc; + + rc = ixgbe_restart_an_internal_phy_x550em(hw); + if (rc) + return rc; + + return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait); +} + +/** + * ixgbe_setup_sgmii_fw - Set up link for sgmii with firmware-controlled PHYs + * @hw: pointer to hardware structure + */ +STATIC s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg_wait) +{ + struct ixgbe_mac_info *mac = &hw->mac; + u32 lval, sval, flx_val; + s32 rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &lval); + if (rc) + return rc; + + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN; + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, lval); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &sval); + if (rc) + return rc; + + sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D; + sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D; + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, sval); + if (rc) + return rc; + + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, lval); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val); + if (rc) + return rc; + + flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN; + flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; + + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val); + if (rc) + return rc; + + rc = ixgbe_restart_an_internal_phy_x550em(hw); + + return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait); +} + /** * ixgbe_init_mac_link_ops_X550em - init mac link function pointers * @hw: pointer to hardware structure @@ -1216,8 +1995,8 @@ void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) DEBUGFUNC("ixgbe_init_mac_link_ops_X550em"); - switch (hw->mac.ops.get_media_type(hw)) { - case ixgbe_media_type_fiber: + switch (hw->mac.ops.get_media_type(hw)) { + case ixgbe_media_type_fiber: /* CS4227 does not support autoneg, so disable the laser control * functions for SFP+ fiber */ @@ -1225,17 +2004,41 @@ void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) mac->ops.enable_tx_laser = NULL; mac->ops.flap_tx_laser = NULL; mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber; - mac->ops.setup_mac_link = ixgbe_setup_mac_link_sfp_x550em; mac->ops.set_rate_select_speed = ixgbe_set_soft_rate_select_speed; + + if ((hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP_N) || + (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP)) + mac->ops.setup_mac_link = + ixgbe_setup_mac_link_sfp_x550a; + else + mac->ops.setup_mac_link = + ixgbe_setup_mac_link_sfp_x550em; break; case ixgbe_media_type_copper: - mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em; - mac->ops.check_link = ixgbe_check_link_t_X550em; + if (hw->mac.type == ixgbe_mac_X550EM_a) { + if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T || + hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L) { + mac->ops.setup_link = ixgbe_setup_sgmii_fw; + mac->ops.check_link = + ixgbe_check_mac_link_generic; + } else { + mac->ops.setup_link = + ixgbe_setup_mac_link_t_X550em; + } + } else { + mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em; + mac->ops.check_link = ixgbe_check_link_t_X550em; + } + break; + case ixgbe_media_type_backplane: + if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII || + hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L) + mac->ops.setup_link = ixgbe_setup_sgmii; break; default: break; - } + } } /** @@ -1250,6 +2053,13 @@ s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, { DEBUGFUNC("ixgbe_get_link_capabilities_X550em"); + + if (hw->phy.type == ixgbe_phy_fw) { + *autoneg = true; + *speed = hw->phy.speeds_supported; + return 0; + } + /* SFP */ if (hw->phy.media_type == ixgbe_media_type_fiber) { @@ -1272,8 +2082,29 @@ s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, else *speed = IXGBE_LINK_SPEED_10GB_FULL; } else { - *speed = IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; + switch (hw->phy.type) { + case ixgbe_phy_sgmii: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + case ixgbe_phy_x550em_kr: + if (hw->mac.type == ixgbe_mac_X550EM_a) { + /* check different backplane modes */ + if (hw->phy.nw_mng_if_sel & + IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G) { + *speed = IXGBE_LINK_SPEED_2_5GB_FULL; + break; + } else if (hw->device_id == + IXGBE_DEV_ID_X550EM_A_KR_L) { + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + } + } + /* fall through */ + default: + *speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + break; + } *autoneg = true; } @@ -1318,7 +2149,7 @@ STATIC s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) IXGBE_MDIO_GLOBAL_ALARM_1_INT))) return status; - /* High temperature failure alarm triggered */ + /* Global alarm triggered */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1, IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, ®); @@ -1331,6 +2162,21 @@ STATIC s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) /* power down the PHY in case the PHY FW didn't already */ ixgbe_set_copper_phy_power(hw, false); return IXGBE_ERR_OVERTEMP; + } else if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) { + /* device fault alarm triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + + if (status != IXGBE_SUCCESS) + return status; + + /* if device fault was due to high temp alarm handle and exit */ + if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) { + /* power down the PHY in case the PHY FW didn't */ + ixgbe_set_copper_phy_power(hw, false); + return IXGBE_ERR_OVERTEMP; + } } /* Vendor alarm 2 triggered */ @@ -1374,21 +2220,34 @@ STATIC s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); /* Enable link status change alarm */ - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); - if (status != IXGBE_SUCCESS) - return status; + /* Enable the LASI interrupts on X552 devices to receive notifications + * of the link configurations of the external PHY and correspondingly + * support the configuration of the internal iXFI link, since iXFI does + * not support auto-negotiation. This is not required for X553 devices + * having KR support, which performs auto-negotiations and which is used + * as the internal link to the external PHY. Hence adding a check here + * to avoid enabling LASI interrupts for X553 devices. + */ + if (hw->mac.type != ixgbe_mac_X550EM_a) { + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); - reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN; + if (status != IXGBE_SUCCESS) + return status; - status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg); + reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN; - if (status != IXGBE_SUCCESS) - return status; + status = hw->phy.ops.write_reg(hw, + IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg); + + if (status != IXGBE_SUCCESS) + return status; + } - /* Enables high temperature failure alarm */ + /* Enable high temperature failure and global fault alarms */ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, ®); @@ -1396,7 +2255,8 @@ STATIC s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) if (status != IXGBE_SUCCESS) return status; - reg |= IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN; + reg |= (IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN | + IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN); status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, @@ -1453,9 +2313,9 @@ STATIC s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw, s32 status; u32 reg_val; - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status) return status; @@ -1471,13 +2331,102 @@ STATIC s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw, if (speed & IXGBE_LINK_SPEED_1GB_FULL) reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX; - /* Restart auto-negotiation. */ - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - return status; + if (hw->mac.type == ixgbe_mac_X550EM_a) { + /* Set lane mode to KR auto negotiation */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + + if (status) + return status; + + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; + reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN; + reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; + + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + } + + return ixgbe_restart_an_internal_phy_x550em(hw); +} + +/** + * ixgbe_reset_phy_fw - Reset firmware-controlled PHYs + * @hw: pointer to hardware structure + */ +static s32 ixgbe_reset_phy_fw(struct ixgbe_hw *hw) +{ + u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 }; + s32 rc; + + if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw)) + return IXGBE_SUCCESS; + + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_PHY_SW_RESET, &store); + if (rc) + return rc; + memset(store, 0, sizeof(store)); + + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_INIT_PHY, &store); + if (rc) + return rc; + + return ixgbe_setup_fw_link(hw); +} + +/** + * ixgbe_check_overtemp_fw - Check firmware-controlled PHYs for overtemp + * @hw: pointer to hardware structure + */ +static s32 ixgbe_check_overtemp_fw(struct ixgbe_hw *hw) +{ + u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 }; + s32 rc; + + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &store); + if (rc) + return rc; + + if (store[0] & FW_PHY_ACT_GET_LINK_INFO_TEMP) { + ixgbe_shutdown_fw_phy(hw); + return IXGBE_ERR_OVERTEMP; + } + return IXGBE_SUCCESS; +} + +/** + * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register + * @hw: pointer to hardware structure + * + * Read NW_MNG_IF_SEL register and save field values, and check for valid field + * values. + **/ +STATIC s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw) +{ + /* Save NW management interface connected on board. This is used + * to determine internal PHY mode. + */ + hw->phy.nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); + + /* If X552 (X550EM_a) and MDIO is connected to external PHY, then set + * PHY address. This register field was has only been used for X552. + */ + if (hw->mac.type == ixgbe_mac_X550EM_a && + hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_MDIO_ACT) { + hw->phy.addr = (hw->phy.nw_mng_if_sel & + IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD) >> + IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT; + } + + return IXGBE_SUCCESS; } /** @@ -1491,35 +2440,54 @@ STATIC s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw, s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) { struct ixgbe_phy_info *phy = &hw->phy; - ixgbe_link_speed speed; s32 ret_val; DEBUGFUNC("ixgbe_init_phy_ops_X550em"); hw->mac.ops.set_lan_id(hw); + ixgbe_read_mng_if_sel_x550em(hw); if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) { phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; ixgbe_setup_mux_ctl(hw); + phy->ops.identify_sfp = ixgbe_identify_sfp_module_X550em; + } - /* Save NW management interface connected on board. This is used - * to determine internal PHY mode. - */ - phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); - - /* If internal PHY mode is KR, then initialize KR link */ - if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) { - speed = IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; - ret_val = ixgbe_setup_kr_speed_x550em(hw, speed); - } + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: + phy->ops.read_reg_mdi = ixgbe_read_phy_reg_mdi_22; + phy->ops.write_reg_mdi = ixgbe_write_phy_reg_mdi_22; + hw->phy.ops.read_reg = ixgbe_read_phy_reg_x550a; + hw->phy.ops.write_reg = ixgbe_write_phy_reg_x550a; + phy->ops.check_overtemp = ixgbe_check_overtemp_fw; + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM; - phy->ops.identify_sfp = ixgbe_identify_sfp_module_X550em; + break; + case IXGBE_DEV_ID_X550EM_A_10G_T: + case IXGBE_DEV_ID_X550EM_A_SFP: + hw->phy.ops.read_reg = ixgbe_read_phy_reg_x550a; + hw->phy.ops.write_reg = ixgbe_write_phy_reg_x550a; + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM; + break; + case IXGBE_DEV_ID_X550EM_X_SFP: + /* set up for CS4227 usage */ + hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; + break; + default: + break; } /* Identify the PHY or SFP module */ ret_val = phy->ops.identify(hw); - if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED) + if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED || + ret_val == IXGBE_ERR_PHY_ADDR_INVALID) return ret_val; /* Setup function pointers based on detected hardware */ @@ -1530,7 +2498,7 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) /* Set functions pointers based on phy type */ switch (hw->phy.type) { case ixgbe_phy_x550em_kx4: - phy->ops.setup_link = ixgbe_setup_kx4_x550em; + phy->ops.setup_link = NULL; phy->ops.read_reg = ixgbe_read_phy_reg_x550em; phy->ops.write_reg = ixgbe_write_phy_reg_x550em; break; @@ -1540,35 +2508,64 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) phy->ops.write_reg = ixgbe_write_phy_reg_x550em; break; case ixgbe_phy_x550em_ext_t: - /* Save NW management interface connected on board. This is used - * to determine internal PHY mode - */ - phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); - /* If internal link mode is XFI, then setup iXFI internal link, * else setup KR now. */ - if (!(phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { - phy->ops.setup_internal_link = + phy->ops.setup_internal_link = ixgbe_setup_internal_phy_t_x550em; - } else { - speed = IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; - ret_val = ixgbe_setup_kr_speed_x550em(hw, speed); - } - /* setup SW LPLU only for first revision */ - if (!(IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, - IXGBE_FUSES0_GROUP(0)))) + /* setup SW LPLU only for first revision of X550EM_x */ + if ((hw->mac.type == ixgbe_mac_X550EM_x) && + !(IXGBE_FUSES0_REV_MASK & + IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))) phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em; phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em; phy->ops.reset = ixgbe_reset_phy_t_X550em; break; + case ixgbe_phy_sgmii: + phy->ops.setup_link = NULL; + break; + case ixgbe_phy_fw: + phy->ops.setup_link = ixgbe_setup_fw_link; + phy->ops.reset = ixgbe_reset_phy_fw; + break; + default: + break; + } + return ret_val; +} + +/** + * ixgbe_set_mdio_speed - Set MDIO clock speed + * @hw: pointer to hardware structure + */ +STATIC void ixgbe_set_mdio_speed(struct ixgbe_hw *hw) +{ + u32 hlreg0; + + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_10G_T: + case IXGBE_DEV_ID_X550EM_A_SGMII: + case IXGBE_DEV_ID_X550EM_A_SGMII_L: + case IXGBE_DEV_ID_X550EM_A_10G_T: + case IXGBE_DEV_ID_X550EM_A_SFP: + case IXGBE_DEV_ID_X550EM_A_QSFP: + /* Config MDIO clock speed before the first MDIO PHY access */ + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); + hlreg0 &= ~IXGBE_HLREG0_MDCSPD; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); + break; + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: + /* Select fast MDIO clock speed for these devices */ + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); + hlreg0 |= IXGBE_HLREG0_MDCSPD; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); + break; default: break; } - return ret_val; } /** @@ -1585,7 +2582,6 @@ s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) s32 status; u32 ctrl = 0; u32 i; - u32 hlreg0; bool link_up = false; DEBUGFUNC("ixgbe_reset_hw_X550em"); @@ -1598,9 +2594,9 @@ s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) /* flush pending Tx transactions */ ixgbe_clear_tx_pending(hw); - /* PHY ops must be identified and initialized prior to reset */ + ixgbe_set_mdio_speed(hw); - /* Identify PHY and related function pointers */ + /* PHY ops must be identified and initialized prior to reset */ status = hw->phy.ops.init(hw); if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) @@ -1623,8 +2619,10 @@ s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) return status; /* Reset PHY */ - if (!hw->phy.reset_disable && hw->phy.ops.reset) - hw->phy.ops.reset(hw); + if (!hw->phy.reset_disable && hw->phy.ops.reset) { + if (hw->phy.ops.reset(hw) == IXGBE_ERR_OVERTEMP) + return IXGBE_ERR_OVERTEMP; + } mac_reset_top: /* Issue global reset to the MAC. Needs to be SW reset if link is up. @@ -1677,12 +2675,7 @@ mac_reset_top: hw->mac.num_rar_entries = 128; hw->mac.ops.init_rx_addrs(hw); - if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) { - /* Config MDIO clock speed. */ - hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); - hlreg0 &= ~IXGBE_HLREG0_MDCSPD; - IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); - } + ixgbe_set_mdio_speed(hw); if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) ixgbe_setup_mux_ctl(hw); @@ -1737,48 +2730,14 @@ s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) * ixgbe_setup_kr_x550em - Configure the KR PHY. * @hw: pointer to hardware structure * - * Configures the integrated KR PHY. + * Configures the integrated KR PHY for X550EM_x. **/ s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw) { - return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised); -} - -/** - * ixgbe_setup_kx4_x550em - Configure the KX4 PHY. - * @hw: pointer to hardware structure - * - * Configures the integrated KX4 PHY. - **/ -s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw) -{ - s32 status; - u32 reg_val; - - status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1, - IXGBE_SB_IOSF_TARGET_KX4_PCS, ®_val); - if (status) - return status; - - reg_val &= ~(IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 | - IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX); - - reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE; - - /* Advertise 10G support. */ - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) - reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4; - - /* Advertise 1G support. */ - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) - reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX; - - /* Restart auto-negotiation. */ - reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART; - status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1, - IXGBE_SB_IOSF_TARGET_KX4_PCS, reg_val); + if (hw->mac.type != ixgbe_mac_X550EM_x) + return IXGBE_SUCCESS; - return status; + return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised); } /** @@ -1809,96 +2768,221 @@ s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, if (ret_val != IXGBE_SUCCESS) return ret_val; - /* Configure CS4227 LINE side to 10G SR. */ - reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12); - reg_val = IXGBE_CS4227_SPEED_10G; - ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice, - reg_val); + if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { + /* Configure CS4227 LINE side to 10G SR. */ + reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB + + (hw->bus.lan_id << 12); + reg_val = IXGBE_CS4227_SPEED_10G; + ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, + reg_val); - reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12); - reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; - ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice, - reg_val); + reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + + (hw->bus.lan_id << 12); + reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; + ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, + reg_val); - /* Configure CS4227 for HOST connection rate then type. */ - reg_slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12); - reg_val = (speed & IXGBE_LINK_SPEED_10GB_FULL) ? + /* Configure CS4227 for HOST connection rate then type. */ + reg_slice = IXGBE_CS4227_HOST_SPARE22_MSB + + (hw->bus.lan_id << 12); + reg_val = (speed & IXGBE_LINK_SPEED_10GB_FULL) ? IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G; - ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice, - reg_val); + ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, + reg_val); - reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12); - if (setup_linear) - reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; - else - reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; - ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice, - reg_val); + reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB + + (hw->bus.lan_id << 12); + if (setup_linear) + reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; + else + reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; + ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, + reg_val); - /* If internal link mode is XFI, then setup XFI internal link. */ - if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) + /* Setup XFI internal link. */ ret_val = ixgbe_setup_ixfi_x550em(hw, &speed); - + } else { + /* Configure internal PHY for KR/KX. */ + ixgbe_setup_kr_speed_x550em(hw, speed); + + /* Configure CS4227 LINE side to proper mode. */ + reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + + (hw->bus.lan_id << 12); + if (setup_linear) + reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; + else + reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; + ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, + reg_val); + } return ret_val; } /** - * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. + * ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode * @hw: pointer to hardware structure * @speed: the link speed to force * - * Configures the integrated KR PHY to use iXFI mode. Used to connect an - * internal and external PHY at a specific speed, without autonegotiation. + * Configures the integrated PHY for native SFI mode. Used to connect the + * internal PHY directly to an SFP cage, without autonegotiation. **/ -STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) +STATIC s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed) { + struct ixgbe_mac_info *mac = &hw->mac; s32 status; u32 reg_val; - /* Disable AN and force speed to 10G Serial. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + /* Disable all AN and force speed to 10G Serial. */ + status = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status != IXGBE_SUCCESS) return status; - reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; - reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; /* Select forced link speed for internal PHY. */ switch (*speed) { case IXGBE_LINK_SPEED_10GB_FULL: - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; + reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10G; break; case IXGBE_LINK_SPEED_1GB_FULL: - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G; break; default: - /* Other link speeds are not supported by internal KR PHY. */ + /* Other link speeds are not supported by internal PHY. */ return IXGBE_ERR_LINK_SETUP; } - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - if (status != IXGBE_SUCCESS) - return status; + status = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + /* Toggle port SW reset by AN reset. */ + status = ixgbe_restart_an_internal_phy_x550em(hw); + + return status; +} + +/** + * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP + * @hw: pointer to hardware structure + * + * Configure the the integrated PHY for SFP support. + **/ +s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) +{ + s32 ret_val; + u16 reg_phy_ext; + bool setup_linear = false; + u32 reg_slice, reg_phy_int, slice_offset; + + UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); + + /* Check if SFP module is supported and linear */ + ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); + + /* If no SFP module present, then return success. Return success since + * SFP not present error is not excepted in the setup MAC link flow. + */ + if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT) + return IXGBE_SUCCESS; + + if (ret_val != IXGBE_SUCCESS) + return ret_val; + + if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP_N) { + /* Configure internal PHY for native SFI based on module type */ + ret_val = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_phy_int); + + if (ret_val != IXGBE_SUCCESS) + return ret_val; + + reg_phy_int &= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA; + if (!setup_linear) + reg_phy_int |= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_SR; + + ret_val = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_phy_int); + + if (ret_val != IXGBE_SUCCESS) + return ret_val; + + /* Setup SFI internal link. */ + ret_val = ixgbe_setup_sfi_x550a(hw, &speed); + } else { + /* Configure internal PHY for KR/KX. */ + ixgbe_setup_kr_speed_x550em(hw, speed); + + if (hw->phy.addr == 0x0 || hw->phy.addr == 0xFFFF) { + /* Find Address */ + DEBUGOUT("Invalid NW_MNG_IF_SEL.MDIO_PHY_ADD value\n"); + return IXGBE_ERR_PHY_ADDR_INVALID; + } + + /* Get external PHY SKU id */ + ret_val = hw->phy.ops.read_reg(hw, IXGBE_CS4227_EFUSE_PDF_SKU, + IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); + + if (ret_val != IXGBE_SUCCESS) + return ret_val; + + /* When configuring quad port CS4223, the MAC instance is part + * of the slice offset. + */ + if (reg_phy_ext == IXGBE_CS4223_SKU_ID) + slice_offset = (hw->bus.lan_id + + (hw->bus.instance_id << 1)) << 12; + else + slice_offset = hw->bus.lan_id << 12; + + /* Configure CS4227/CS4223 LINE side to proper mode. */ + reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + slice_offset; + if (setup_linear) + reg_phy_ext = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; + else + reg_phy_ext = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; + ret_val = hw->phy.ops.write_reg(hw, reg_slice, + IXGBE_MDIO_ZERO_DEV_TYPE, reg_phy_ext); + } + return ret_val; +} + +/** + * ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration + * @hw: pointer to hardware structure + * + * iXfI configuration needed for ixgbe_mac_X550EM_x devices. + **/ +STATIC s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + s32 status; + u32 reg_val; /* Disable training protocol FSM. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, + status = mac->ops.read_iosf_sb_reg(hw, IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status != IXGBE_SUCCESS) return status; reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL; - status = ixgbe_write_iosf_sb_reg_x550(hw, + status = mac->ops.write_iosf_sb_reg(hw, IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); if (status != IXGBE_SUCCESS) return status; /* Disable Flex from training TXFFE. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, + status = mac->ops.read_iosf_sb_reg(hw, IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status != IXGBE_SUCCESS) @@ -1906,12 +2990,12 @@ STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; - status = ixgbe_write_iosf_sb_reg_x550(hw, + status = mac->ops.write_iosf_sb_reg(hw, IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); if (status != IXGBE_SUCCESS) return status; - status = ixgbe_read_iosf_sb_reg_x550(hw, + status = mac->ops.read_iosf_sb_reg(hw, IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status != IXGBE_SUCCESS) @@ -1919,14 +3003,14 @@ STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; - status = ixgbe_write_iosf_sb_reg_x550(hw, + status = mac->ops.write_iosf_sb_reg(hw, IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); if (status != IXGBE_SUCCESS) return status; /* Enable override for coefficients. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, + status = mac->ops.read_iosf_sb_reg(hw, IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status != IXGBE_SUCCESS) @@ -1935,22 +3019,68 @@ STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN; reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN; reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN; - status = ixgbe_write_iosf_sb_reg_x550(hw, + status = mac->ops.write_iosf_sb_reg(hw, IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - if (status != IXGBE_SUCCESS) - return status; + return status; +} - /* Toggle port SW reset by AN reset. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, +/** + * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. + * @hw: pointer to hardware structure + * @speed: the link speed to force + * + * Configures the integrated KR PHY to use iXFI mode. Used to connect an + * internal and external PHY at a specific speed, without autonegotiation. + **/ +STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) +{ + struct ixgbe_mac_info *mac = &hw->mac; + s32 status; + u32 reg_val; + + /* iXFI is only supported with X552 */ + if (mac->type != ixgbe_mac_X550EM_x) + return IXGBE_ERR_LINK_SETUP; + + /* Disable AN and force speed to 10G Serial. */ + status = mac->ops.read_iosf_sb_reg(hw, IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status != IXGBE_SUCCESS) return status; - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; - status = ixgbe_write_iosf_sb_reg_x550(hw, + + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + + /* Select forced link speed for internal PHY. */ + switch (*speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + break; + default: + /* Other link speeds are not supported by internal KR PHY. */ + return IXGBE_ERR_LINK_SETUP; + } + + status = mac->ops.write_iosf_sb_reg(hw, IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status != IXGBE_SUCCESS) + return status; + + /* Additional configuration needed for x550em_x */ + if (hw->mac.type == ixgbe_mac_X550EM_x) { + status = ixgbe_setup_ixfi_x550em_x(hw); + if (status != IXGBE_SUCCESS) + return status; + } + + /* Toggle port SW reset by AN reset. */ + status = ixgbe_restart_an_internal_phy_x550em(hw); return status; } @@ -2009,43 +3139,51 @@ s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw) if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) return IXGBE_ERR_CONFIG; - /* If link is not up, then there is no setup necessary so return */ - status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); - if (status != IXGBE_SUCCESS) - return status; + if (hw->mac.type == ixgbe_mac_X550EM_x && + !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { + /* If link is down, there is no setup necessary so return */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status != IXGBE_SUCCESS) + return status; - if (!link_up) - return IXGBE_SUCCESS; + if (!link_up) + return IXGBE_SUCCESS; - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &speed); - if (status != IXGBE_SUCCESS) - return status; + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &speed); + if (status != IXGBE_SUCCESS) + return status; - /* If link is not still up, then no setup is necessary so return */ - status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); - if (status != IXGBE_SUCCESS) - return status; - if (!link_up) - return IXGBE_SUCCESS; + /* If link is still down - no setup is required so return */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status != IXGBE_SUCCESS) + return status; + if (!link_up) + return IXGBE_SUCCESS; - /* clear everything but the speed and duplex bits */ - speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK; + /* clear everything but the speed and duplex bits */ + speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK; - switch (speed) { - case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL: - force_speed = IXGBE_LINK_SPEED_10GB_FULL; - break; - case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL: - force_speed = IXGBE_LINK_SPEED_1GB_FULL; - break; - default: - /* Internal PHY does not support anything else */ - return IXGBE_ERR_INVALID_LINK_SETTINGS; - } + switch (speed) { + case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL: + force_speed = IXGBE_LINK_SPEED_10GB_FULL; + break; + case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL: + force_speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + default: + /* Internal PHY does not support anything else */ + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } - return ixgbe_setup_ixfi_x550em(hw, &force_speed); + return ixgbe_setup_ixfi_x550em(hw, &force_speed); + } else { + speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + return ixgbe_setup_kr_speed_x550em(hw, speed); + } } /** @@ -2060,123 +3198,99 @@ s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw) u32 reg_val; /* Disable AN and force speed to 10G Serial. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status != IXGBE_SUCCESS) return status; reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); if (status != IXGBE_SUCCESS) return status; /* Set near-end loopback clocks. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status != IXGBE_SUCCESS) return status; reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B; reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); if (status != IXGBE_SUCCESS) return status; /* Set loopback enable. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status != IXGBE_SUCCESS) return status; reg_val |= IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); if (status != IXGBE_SUCCESS) return status; /* Training bypass. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status != IXGBE_SUCCESS) return status; - reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - - return status; -} - -/** - * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command - * assuming that the semaphore is already obtained. - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM - * - * Reads a 16 bit word from the EEPROM using the hostif. - **/ -s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, - u16 *data) -{ - s32 status; - struct ixgbe_hic_read_shadow_ram buffer; - - DEBUGFUNC("ixgbe_read_ee_hostif_data_X550"); - buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; - buffer.hdr.req.buf_lenh = 0; - buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; - buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; - - /* convert offset from words to bytes */ - buffer.address = IXGBE_CPU_TO_BE32(offset * 2); - /* one word */ - buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16)); - - status = ixgbe_host_interface_command(hw, (u32 *)&buffer, - sizeof(buffer), - IXGBE_HI_COMMAND_TIMEOUT, false); - - if (status) - return status; - - *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, - FW_NVM_DATA_OFFSET); + reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS; + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - return 0; + return status; } /** * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command + * assuming that the semaphore is already obtained. * @hw: pointer to hardware structure * @offset: offset of word in the EEPROM to read * @data: word read from the EEPROM * * Reads a 16 bit word from the EEPROM using the hostif. **/ -s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, - u16 *data) +s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data) { - s32 status = IXGBE_SUCCESS; + const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM; + struct ixgbe_hic_read_shadow_ram buffer; + s32 status; DEBUGFUNC("ixgbe_read_ee_hostif_X550"); + buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; + buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == - IXGBE_SUCCESS) { - status = ixgbe_read_ee_hostif_data_X550(hw, offset, data); - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - } else { - status = IXGBE_ERR_SWFW_SYNC; + /* convert offset from words to bytes */ + buffer.address = IXGBE_CPU_TO_BE32(offset * 2); + /* one word */ + buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16)); + + status = hw->mac.ops.acquire_swfw_sync(hw, mask); + if (status) + return status; + + status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT); + if (!status) { + *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, + FW_NVM_DATA_OFFSET); } + hw->mac.ops.release_swfw_sync(hw, mask); return status; } @@ -2192,6 +3306,7 @@ s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, u16 offset, u16 words, u16 *data) { + const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM; struct ixgbe_hic_read_shadow_ram buffer; u32 current_word = 0; u16 words_to_read; @@ -2201,11 +3316,12 @@ s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, DEBUGFUNC("ixgbe_read_ee_hostif_buffer_X550"); /* Take semaphore for the entire operation. */ - status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + status = hw->mac.ops.acquire_swfw_sync(hw, mask); if (status) { DEBUGOUT("EEPROM read buffer - semaphore failed\n"); return status; } + while (words) { if (words > FW_MAX_READ_BUFFER_SIZE / 2) words_to_read = FW_MAX_READ_BUFFER_SIZE / 2; @@ -2221,10 +3337,8 @@ s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, buffer.address = IXGBE_CPU_TO_BE32((offset + current_word) * 2); buffer.length = IXGBE_CPU_TO_BE16(words_to_read * 2); - status = ixgbe_host_interface_command(hw, (u32 *)&buffer, - sizeof(buffer), - IXGBE_HI_COMMAND_TIMEOUT, - false); + status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT); if (status) { DEBUGOUT("Host interface command failed\n"); @@ -2249,7 +3363,7 @@ s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, } out: - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + hw->mac.ops.release_swfw_sync(hw, mask); return status; } @@ -2669,6 +3783,8 @@ u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw) if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; break; + case ixgbe_phy_fw: + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T; default: break; } @@ -2760,7 +3876,9 @@ s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) bool link_up; /* SW LPLU not required on later HW revisions. */ - if (IXGBE_FUSES0_REV1 & IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0))) + if ((hw->mac.type == ixgbe_mac_X550EM_x) && + (IXGBE_FUSES0_REV_MASK & + IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))) return IXGBE_SUCCESS; /* If blocked by MNG FW, then don't restart AN */ @@ -2944,10 +4062,13 @@ s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw) goto out; } - if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) { - ret_val = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_KR: + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: + ret_val = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (ret_val != IXGBE_SUCCESS) goto out; reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | @@ -2956,18 +4077,267 @@ s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw) reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; if (asm_dir) reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; - ret_val = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + ret_val = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); /* This device does not fully support AN. */ hw->fc.disable_fc_autoneg = true; + break; + default: + break; } out: return ret_val; } +/** + * ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure + * + * Enable flow control according to IEEE clause 37. + **/ +void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw) +{ + u32 link_s1, lp_an_page_low, an_cntl_1; + s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED; + ixgbe_link_speed speed; + bool link_up; + + /* AN should have completed when the cable was plugged in. + * Look for reasons to bail out. Bail out if: + * - FC autoneg is disabled, or if + * - link is not up. + */ + if (hw->fc.disable_fc_autoneg) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "Flow control autoneg is disabled"); + goto out; + } + + hw->mac.ops.check_link(hw, &speed, &link_up, false); + if (!link_up) { + ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down"); + goto out; + } + + /* Check at auto-negotiation has completed */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_S1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &link_s1); + + if (status != IXGBE_SUCCESS || + (link_s1 & IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE) == 0) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + status = IXGBE_ERR_FC_NOT_NEGOTIATED; + goto out; + } + + /* Read the 10g AN autoc and LP ability registers and resolve + * local flow control settings accordingly + */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl_1); + + if (status != IXGBE_SUCCESS) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + goto out; + } + + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LP_BASE_PAGE_HIGH(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &lp_an_page_low); + + if (status != IXGBE_SUCCESS) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + goto out; + } + + status = ixgbe_negotiate_fc(hw, an_cntl_1, lp_an_page_low, + IXGBE_KRM_AN_CNTL_1_SYM_PAUSE, + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE, + IXGBE_KRM_LP_BASE_PAGE_HIGH_SYM_PAUSE, + IXGBE_KRM_LP_BASE_PAGE_HIGH_ASM_PAUSE); + +out: + if (status == IXGBE_SUCCESS) { + hw->fc.fc_was_autonegged = true; + } else { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + } +} + +/** + * ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings + * @hw: pointer to hardware structure + * + **/ +void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw) +{ + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; +} + +/** + * ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure + * + * Enable flow control according to IEEE clause 37. + **/ +void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED; + u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 }; + ixgbe_link_speed speed; + bool link_up; + u32 fc; + + /* AN should have completed when the cable was plugged in. + * Look for reasons to bail out. Bail out if: + * - FC autoneg is disabled, or if + * - link is not up. + */ + if (hw->fc.disable_fc_autoneg) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "Flow control autoneg is disabled"); + goto out; + } + + hw->mac.ops.check_link(hw, &speed, &link_up, false); + if (!link_up) { + ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down"); + goto out; + } + + /* Check if auto-negotiation has completed */ + status = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &info); + if (status != IXGBE_SUCCESS || + !(info[0] & FW_PHY_ACT_GET_LINK_INFO_AN_COMPLETE)) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + status = IXGBE_ERR_FC_NOT_NEGOTIATED; + goto out; + } + + /* Get the advertized flow control and modify it to indicate + * pause and asymmetric pause instead of rx and tx + */ + fc = info[0]; + if (fc & FW_PHY_ACT_GET_LINK_INFO_FC_RX) + fc ^= FW_PHY_ACT_GET_LINK_INFO_FC_TX; + + /* Modify link partner's flow control to indicate pause and + * asymmetric pause instead of rx and tx + */ + if (fc & FW_PHY_ACT_GET_LINK_INFO_LP_FC_RX) + fc ^= FW_PHY_ACT_GET_LINK_INFO_LP_FC_TX; + + /* Negotiate the flow control */ + status = ixgbe_negotiate_fc(hw, fc, fc, + FW_PHY_ACT_GET_LINK_INFO_FC_RX, + FW_PHY_ACT_GET_LINK_INFO_FC_TX, + FW_PHY_ACT_GET_LINK_INFO_LP_FC_RX, + FW_PHY_ACT_GET_LINK_INFO_LP_FC_TX); + +out: + if (status == IXGBE_SUCCESS) { + hw->fc.fc_was_autonegged = true; + } else { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + } +} + +/** + * ixgbe_setup_fc_backplane_x550em_a - Set up flow control + * @hw: pointer to hardware structure + * + * Called at init time to set up flow control. + **/ +s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_SUCCESS; + u32 an_cntl = 0; + + DEBUGFUNC("ixgbe_setup_fc_backplane_x550em_a"); + + /* Validate the requested mode */ + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } + + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; + + /* Set up the 1G and 10G flow control advertisement registers so the + * HW will be able to do FC autoneg once the cable is plugged in. If + * we link at 10G, the 1G advertisement is harmless and vice versa. + */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl); + + if (status != IXGBE_SUCCESS) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + return status; + } + + /* The possible values of fc.requested_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: Invalid. + */ + switch (hw->fc.requested_mode) { + case ixgbe_fc_none: + /* Flow control completely disabled by software override. */ + an_cntl &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE); + break; + case ixgbe_fc_tx_pause: + /* Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + an_cntl |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; + an_cntl &= ~IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; + break; + case ixgbe_fc_rx_pause: + /* Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE, as such we fall + * through to the fc_full statement. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + an_cntl |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; + break; + default: + ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, + "Flow control param set incorrectly\n"); + return IXGBE_ERR_CONFIG; + } + + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, an_cntl); + + /* Restart auto-negotiation. */ + status = ixgbe_restart_an_internal_phy_x550em(hw); + + return status; +} + /** * ixgbe_set_mux - Set mux for port 1 access with CS4227 * @hw: pointer to hardware structure @@ -3028,6 +4398,120 @@ void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) ixgbe_release_swfw_sync_X540(hw, mask); } +/** + * ixgbe_acquire_swfw_sync_X550a - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore and get the shared phy token as needed + */ +STATIC s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask) +{ + u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM; + int retries = FW_PHY_TOKEN_RETRIES; + s32 status = IXGBE_SUCCESS; + + DEBUGFUNC("ixgbe_acquire_swfw_sync_X550a"); + + while (--retries) { + status = IXGBE_SUCCESS; + if (hmask) + status = ixgbe_acquire_swfw_sync_X540(hw, hmask); + if (status) + return status; + if (!(mask & IXGBE_GSSR_TOKEN_SM)) + return IXGBE_SUCCESS; + + status = ixgbe_get_phy_token(hw); + if (status == IXGBE_SUCCESS) + return IXGBE_SUCCESS; + + if (hmask) + ixgbe_release_swfw_sync_X540(hw, hmask); + if (status != IXGBE_ERR_TOKEN_RETRY) + return status; + } + + return status; +} + +/** + * ixgbe_release_swfw_sync_X550a - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore and puts the shared phy token as needed + */ +STATIC void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask) +{ + u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM; + + DEBUGFUNC("ixgbe_release_swfw_sync_X550a"); + + if (mask & IXGBE_GSSR_TOKEN_SM) + ixgbe_put_phy_token(hw); + + if (hmask) + ixgbe_release_swfw_sync_X540(hw, hmask); +} + +/** + * ixgbe_read_phy_reg_x550a - Reads specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @phy_data: Pointer to read data from PHY register + * + * Reads a value from a specified PHY register using the SWFW lock and PHY + * Token. The PHY Token is needed since the MDIO is shared between to MAC + * instances. + **/ +s32 ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data) +{ + s32 status; + u32 mask = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM; + + DEBUGFUNC("ixgbe_read_phy_reg_x550a"); + + if (hw->mac.ops.acquire_swfw_sync(hw, mask)) + return IXGBE_ERR_SWFW_SYNC; + + status = hw->phy.ops.read_reg_mdi(hw, reg_addr, device_type, phy_data); + + hw->mac.ops.release_swfw_sync(hw, mask); + + return status; +} + +/** + * ixgbe_write_phy_reg_x550a - Writes specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register + * + * Writes a value to specified PHY register using the SWFW lock and PHY Token. + * The PHY Token is needed since the MDIO is shared between to MAC instances. + **/ +s32 ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + s32 status; + u32 mask = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM; + + DEBUGFUNC("ixgbe_write_phy_reg_x550a"); + + if (hw->mac.ops.acquire_swfw_sync(hw, mask) == IXGBE_SUCCESS) { + status = hw->phy.ops.write_reg_mdi(hw, reg_addr, device_type, + phy_data); + hw->mac.ops.release_swfw_sync(hw, mask); + } else { + status = IXGBE_ERR_SWFW_SYNC; + } + + return status; +} + /** * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt * @hw: pointer to hardware structure @@ -3083,8 +4567,10 @@ s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw, else force_speed = IXGBE_LINK_SPEED_1GB_FULL; - /* If internal link mode is XFI, then setup XFI internal link. */ - if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { + /* If X552 and internal link mode is XFI, then setup XFI internal link. + */ + if (hw->mac.type == ixgbe_mac_X550EM_x && + !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { status = ixgbe_setup_ixfi_x550em(hw, &force_speed); if (status != IXGBE_SUCCESS) @@ -3107,7 +4593,7 @@ s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed, bool *link_up, bool link_up_wait_to_complete) { u32 status; - u16 autoneg_status; + u16 i, autoneg_status = 0; if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) return IXGBE_ERR_CONFIG; @@ -3120,21 +4606,18 @@ s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed, return status; /* MAC link is up, so check external PHY link. - * Read this twice back to back to indicate current status. + * X557 PHY. Link status is latching low, and can only be used to detect + * link drop, and not the current status of the link without performing + * back-to-back reads. */ - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_status); - - if (status != IXGBE_SUCCESS) - return status; + for (i = 0; i < 2; i++) { + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_status); - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_status); - - if (status != IXGBE_SUCCESS) - return status; + if (status != IXGBE_SUCCESS) + return status; + } /* If external PHY link is not up, then indicate link not up */ if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS)) @@ -3207,3 +4690,64 @@ s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx) return IXGBE_SUCCESS; } + +/** + * ixgbe_set_fw_drv_ver_x550 - Sends driver version to firmware + * @hw: pointer to the HW structure + * @maj: driver version major number + * @min: driver version minor number + * @build: driver version build number + * @sub: driver version sub build number + * @len: length of driver_ver string + * @driver_ver: driver string + * + * Sends driver version number to firmware through the manageability + * block. On success return IXGBE_SUCCESS + * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring + * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. + **/ +s32 ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min, + u8 build, u8 sub, u16 len, const char *driver_ver) +{ + struct ixgbe_hic_drv_info2 fw_cmd; + s32 ret_val = IXGBE_SUCCESS; + int i; + + DEBUGFUNC("ixgbe_set_fw_drv_ver_x550"); + + if ((len == 0) || (driver_ver == NULL) || + (len > sizeof(fw_cmd.driver_string))) + return IXGBE_ERR_INVALID_ARGUMENT; + + fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; + fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN + len; + fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; + fw_cmd.port_num = (u8)hw->bus.func; + fw_cmd.ver_maj = maj; + fw_cmd.ver_min = min; + fw_cmd.ver_build = build; + fw_cmd.ver_sub = sub; + fw_cmd.hdr.checksum = 0; + memcpy(fw_cmd.driver_string, driver_ver, len); + fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd, + (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len)); + + for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { + ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, + sizeof(fw_cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); + if (ret_val != IXGBE_SUCCESS) + continue; + + if (fw_cmd.hdr.cmd_or_resp.ret_status == + FW_CEM_RESP_STATUS_SUCCESS) + ret_val = IXGBE_SUCCESS; + else + ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; + + break; + } + + return ret_val; +}