X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Fbase%2Fixgbe_x550.c;h=930a61a20b2cd8c69bda5bbd8aef236f2f2a4755;hb=b8e609e8e266b497503231d8fc9b0d9c609db272;hp=32786f857896d2420357a3a8741a744706a96064;hpb=d53a80024af4559e748909dc9c9b095486287de5;p=dpdk.git diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c index 32786f8578..930a61a20b 100644 --- a/drivers/net/ixgbe/base/ixgbe_x550.c +++ b/drivers/net/ixgbe/base/ixgbe_x550.c @@ -1,35 +1,6 @@ -/******************************************************************************* - -Copyright (c) 2001-2015, Intel Corporation -All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. Neither the name of the Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -***************************************************************************/ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2001-2018 + */ #include "ixgbe_x550.h" #include "ixgbe_x540.h" @@ -82,10 +53,15 @@ s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw) mac->ops.enable_mdd = ixgbe_enable_mdd_X550; mac->ops.mdd_event = ixgbe_mdd_event_X550; mac->ops.restore_mdd_vf = ixgbe_restore_mdd_vf_X550; + mac->ops.fw_recovery_mode = ixgbe_fw_recovery_mode_X550; mac->ops.disable_rx = ixgbe_disable_rx_x550; /* Manageability interface */ mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_x550; switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_1G_T: + hw->mac.ops.led_on = NULL; + hw->mac.ops.led_off = NULL; + break; case IXGBE_DEV_ID_X550EM_X_10G_T: case IXGBE_DEV_ID_X550EM_A_10G_T: hw->mac.ops.led_on = ixgbe_led_on_t_X550em; @@ -331,98 +307,6 @@ STATIC void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw) IXGBE_WRITE_FLUSH(hw); } -/** - * ixgbe_read_phy_reg_mdi_22 - Read from a clause 22 PHY register without lock - * @hw: pointer to hardware structure - * @reg_addr: 32 bit address of PHY register to read - * @dev_type: always unused - * @phy_data: Pointer to read data from PHY register - */ -STATIC s32 ixgbe_read_phy_reg_mdi_22(struct ixgbe_hw *hw, u32 reg_addr, - u32 dev_type, u16 *phy_data) -{ - u32 i, data, command; - UNREFERENCED_1PARAMETER(dev_type); - - /* Setup and write the read command */ - command = (reg_addr << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - IXGBE_MSCA_OLD_PROTOCOL | IXGBE_MSCA_READ_AUTOINC | - IXGBE_MSCA_MDI_COMMAND; - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* Check every 10 usec to see if the access completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - usec_delay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - if (!(command & IXGBE_MSCA_MDI_COMMAND)) - break; - } - - if (command & IXGBE_MSCA_MDI_COMMAND) { - ERROR_REPORT1(IXGBE_ERROR_POLLING, - "PHY read command did not complete.\n"); - return IXGBE_ERR_PHY; - } - - /* Read operation is complete. Get the data from MSRWD */ - data = IXGBE_READ_REG(hw, IXGBE_MSRWD); - data >>= IXGBE_MSRWD_READ_DATA_SHIFT; - *phy_data = (u16)data; - - return IXGBE_SUCCESS; -} - -/** - * ixgbe_write_phy_reg_mdi_22 - Write to a clause 22 PHY register without lock - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @dev_type: always unused - * @phy_data: Data to write to the PHY register - */ -STATIC s32 ixgbe_write_phy_reg_mdi_22(struct ixgbe_hw *hw, u32 reg_addr, - u32 dev_type, u16 phy_data) -{ - u32 i, command; - UNREFERENCED_1PARAMETER(dev_type); - - /* Put the data in the MDI single read and write data register*/ - IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); - - /* Setup and write the write command */ - command = (reg_addr << IXGBE_MSCA_DEV_TYPE_SHIFT) | - (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | - IXGBE_MSCA_OLD_PROTOCOL | IXGBE_MSCA_WRITE | - IXGBE_MSCA_MDI_COMMAND; - - IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); - - /* Check every 10 usec to see if the access completed. - * The MDI Command bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - usec_delay(10); - - command = IXGBE_READ_REG(hw, IXGBE_MSCA); - if (!(command & IXGBE_MSCA_MDI_COMMAND)) - break; - } - - if (command & IXGBE_MSCA_MDI_COMMAND) { - ERROR_REPORT1(IXGBE_ERROR_POLLING, - "PHY write cmd didn't complete\n"); - return IXGBE_ERR_PHY; - } - - return IXGBE_SUCCESS; -} - /** * ixgbe_identify_phy_x550em - Get PHY type based on device id * @hw: pointer to hardware structure @@ -437,7 +321,7 @@ STATIC s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) switch (hw->device_id) { case IXGBE_DEV_ID_X550EM_A_SFP: - return ixgbe_identify_module_generic(hw); + return ixgbe_identify_sfp_module_X550em(hw); case IXGBE_DEV_ID_X550EM_X_SFP: /* set up for CS4227 usage */ ixgbe_setup_mux_ctl(hw); @@ -445,7 +329,7 @@ STATIC s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) /* Fallthrough */ case IXGBE_DEV_ID_X550EM_A_SFP_N: - return ixgbe_identify_module_generic(hw); + return ixgbe_identify_sfp_module_X550em(hw); break; case IXGBE_DEV_ID_X550EM_X_KX4: hw->phy.type = ixgbe_phy_x550em_kx4; @@ -459,14 +343,14 @@ STATIC s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) hw->phy.type = ixgbe_phy_x550em_kr; break; case IXGBE_DEV_ID_X550EM_A_10G_T: - case IXGBE_DEV_ID_X550EM_X_1G_T: case IXGBE_DEV_ID_X550EM_X_10G_T: return ixgbe_identify_phy_generic(hw); + case IXGBE_DEV_ID_X550EM_X_1G_T: + hw->phy.type = ixgbe_phy_ext_1g_t; + break; case IXGBE_DEV_ID_X550EM_A_1G_T: case IXGBE_DEV_ID_X550EM_A_1G_T_L: hw->phy.type = ixgbe_phy_fw; - hw->phy.ops.read_reg = NULL; - hw->phy.ops.write_reg = NULL; if (hw->bus.lan_id) hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; else @@ -751,6 +635,11 @@ s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw) phy->ops.set_phy_power = NULL; phy->ops.get_firmware_version = NULL; break; + case IXGBE_DEV_ID_X550EM_X_1G_T: + mac->ops.setup_fc = NULL; + phy->ops.identify = ixgbe_identify_phy_x550em; + phy->ops.set_phy_power = NULL; + break; default: phy->ops.identify = ixgbe_identify_phy_x550em; } @@ -945,6 +834,11 @@ s32 ixgbe_init_ops_X550EM_x(struct ixgbe_hw *hw) ixgbe_write_i2c_combined_generic_unlocked; link->addr = IXGBE_CS4227; + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_1G_T) { + mac->ops.setup_fc = NULL; + mac->ops.setup_eee = NULL; + mac->ops.init_led_link_act = NULL; + } return ret_val; } @@ -1640,6 +1534,8 @@ STATIC s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear) case ixgbe_sfp_type_1g_sx_core1: case ixgbe_sfp_type_1g_lx_core0: case ixgbe_sfp_type_1g_lx_core1: + case ixgbe_sfp_type_1g_lha_core0: + case ixgbe_sfp_type_1g_lha_core1: *linear = false; break; case ixgbe_sfp_type_unknown: @@ -1746,9 +1642,12 @@ STATIC s32 ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw *hw) return status; } +#ifndef PREBOOT_SUPPORT /** * ixgbe_setup_sgmii - Set up link for sgmii * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait: true when waiting for completion is needed */ STATIC s32 ixgbe_setup_sgmii(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait) @@ -1813,9 +1712,12 @@ STATIC s32 ixgbe_setup_sgmii(struct ixgbe_hw *hw, ixgbe_link_speed speed, return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait); } +#endif /* PREBOOT_SUPPORT */ /** - * ixgbe_setup_sgmii_fw - Set up link for sgmii with firmware-controlled PHYs + * ixgbe_setup_sgmii_fw - Set up link for internal PHY SGMII auto-negotiation * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait: true when waiting for completion is needed */ STATIC s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed, bool autoneg_wait) @@ -1915,6 +1817,8 @@ void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) ixgbe_setup_mac_link_sfp_x550em; break; case ixgbe_media_type_copper: + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_1G_T) + break; if (hw->mac.type == ixgbe_mac_X550EM_a) { if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T || hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L) { @@ -1933,7 +1837,11 @@ void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) case ixgbe_media_type_backplane: if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII || hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L) +#ifdef PREBOOT_SUPPORT + mac->ops.setup_link = ixgbe_setup_sgmii_fw; +#else mac->ops.setup_link = ixgbe_setup_sgmii; +#endif /* PREBOOT_SUPPORT */ break; default: break; @@ -1968,6 +1876,8 @@ s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, /* Check if 1G SFP module. */ if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 + || hw->phy.sfp_type == ixgbe_sfp_type_1g_lha_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_lha_core1 || hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) { *speed = IXGBE_LINK_SPEED_1GB_FULL; @@ -1983,8 +1893,18 @@ s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, } else { switch (hw->phy.type) { case ixgbe_phy_ext_1g_t: +#ifdef PREBOOT_SUPPORT + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; +#endif /* PREBOOT_SUPPORT */ case ixgbe_phy_sgmii: +#ifdef PREBOOT_SUPPORT + *speed = IXGBE_LINK_SPEED_1GB_FULL | + IXGBE_LINK_SPEED_100_FULL | + IXGBE_LINK_SPEED_10_FULL; +#else *speed = IXGBE_LINK_SPEED_1GB_FULL; +#endif /* PREBOOT_SUPPORT */ break; case ixgbe_phy_x550em_kr: if (hw->mac.type == ixgbe_mac_X550EM_a) { @@ -2356,10 +2276,10 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) switch (hw->device_id) { case IXGBE_DEV_ID_X550EM_A_1G_T: case IXGBE_DEV_ID_X550EM_A_1G_T_L: - phy->ops.read_reg_mdi = ixgbe_read_phy_reg_mdi_22; - phy->ops.write_reg_mdi = ixgbe_write_phy_reg_mdi_22; - hw->phy.ops.read_reg = ixgbe_read_phy_reg_x550a; - hw->phy.ops.write_reg = ixgbe_write_phy_reg_x550a; + phy->ops.read_reg_mdi = NULL; + phy->ops.write_reg_mdi = NULL; + hw->phy.ops.read_reg = NULL; + hw->phy.ops.write_reg = NULL; phy->ops.check_overtemp = ixgbe_check_overtemp_fw; if (hw->bus.lan_id) hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; @@ -2381,9 +2301,8 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; break; case IXGBE_DEV_ID_X550EM_X_1G_T: - phy->ops.read_reg_mdi = ixgbe_read_phy_reg_mdi_22; - phy->ops.write_reg_mdi = ixgbe_write_phy_reg_mdi_22; - break; + phy->ops.read_reg_mdi = NULL; + phy->ops.write_reg_mdi = NULL; default: break; } @@ -2414,6 +2333,7 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) case ixgbe_phy_ext_1g_t: /* link is managed by FW */ phy->ops.setup_link = NULL; + phy->ops.reset = NULL; break; case ixgbe_phy_x550em_xfi: /* link is managed by HW */ @@ -2519,7 +2439,8 @@ s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) DEBUGOUT1("Failed to initialize PHY ops, STATUS = %d\n", status); - if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) { + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED || + status == IXGBE_ERR_PHY_ADDR_INVALID) { DEBUGOUT("Returning from reset HW due to PHY init failure\n"); return status; } @@ -2565,10 +2486,9 @@ mac_reset_top: status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); if (status != IXGBE_SUCCESS) { ERROR_REPORT2(IXGBE_ERROR_CAUTION, - "semaphore failed with %d", status); + "semaphore failed with %d", status); return IXGBE_ERR_SWFW_SYNC; } - ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); IXGBE_WRITE_FLUSH(hw); @@ -2681,6 +2601,8 @@ s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw) /** * ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: unused * * Configure the external PHY and the integrated KR PHY for SFP support. **/ @@ -2773,8 +2695,10 @@ STATIC s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed) /** * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: unused * - * Configure the the integrated PHY for SFP support. + * Configure the integrated PHY for SFP support. **/ s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed, @@ -2860,9 +2784,9 @@ s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, (IXGBE_CS4227_EDC_MODE_SR << 1)); if (setup_linear) - reg_phy_ext = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; + reg_phy_ext |= (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; else - reg_phy_ext = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; + reg_phy_ext |= (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; ret_val = hw->phy.ops.write_reg(hw, reg_slice, IXGBE_MDIO_ZERO_DEV_TYPE, reg_phy_ext); @@ -3195,6 +3119,8 @@ s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data) buffer.address = IXGBE_CPU_TO_BE32(offset * 2); /* one word */ buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16)); + buffer.pad2 = 0; + buffer.pad3 = 0; status = hw->mac.ops.acquire_swfw_sync(hw, mask); if (status) @@ -3253,6 +3179,8 @@ s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, /* convert offset from words to bytes */ buffer.address = IXGBE_CPU_TO_BE32((offset + current_word) * 2); buffer.length = IXGBE_CPU_TO_BE16(words_to_read * 2); + buffer.pad2 = 0; + buffer.pad3 = 0; status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer), IXGBE_HI_COMMAND_TIMEOUT); @@ -3390,6 +3318,8 @@ out: * @ptr: pointer offset in eeprom * @size: size of section pointed by ptr, if 0 first word will be used as size * @csum: address of checksum to update + * @buffer: pointer to buffer containing calculated checksum + * @buffer_size: size of buffer * * Returns error status for any failure */ @@ -3724,7 +3654,13 @@ u64 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw) physical_layer |= IXGBE_PHYSICAL_LAYER_10BASE_T; break; case ixgbe_phy_sgmii: +#ifdef PREBOOT_SUPPORT + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | + IXGBE_PHYSICAL_LAYER_100BASE_TX | + IXGBE_PHYSICAL_LAYER_10BASE_T; +#else physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; +#endif /* PREBOOT_SUPPORT */ break; case ixgbe_phy_ext_1g_t: physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; @@ -3761,6 +3697,7 @@ s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw) /** * ixgbe_disable_rx_x550 - Disable RX unit + * @hw: pointer to hardware structure * * Enables the Rx DMA unit for x550 **/ @@ -4405,6 +4342,7 @@ STATIC void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask) * ixgbe_read_phy_reg_x550a - Reads specified PHY register * @hw: pointer to hardware structure * @reg_addr: 32 bit address of PHY register to read + * @device_type: 5 bit device type * @phy_data: Pointer to read data from PHY register * * Reads a value from a specified PHY register using the SWFW lock and PHY @@ -4502,6 +4440,8 @@ s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw, { s32 status; ixgbe_link_speed force_speed; + u32 i; + bool link_up = false; DEBUGFUNC("ixgbe_setup_mac_link_t_X550em"); @@ -4521,6 +4461,19 @@ s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw, if (status != IXGBE_SUCCESS) return status; + + /* Wait for the controller to acquire link */ + for (i = 0; i < 10; i++) { + msec_delay(100); + + status = ixgbe_check_link(hw, &force_speed, &link_up, + false); + if (status != IXGBE_SUCCESS) + return status; + + if (link_up) + break; + } } return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete); @@ -4610,7 +4563,8 @@ s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx) ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data); - return IXGBE_SUCCESS; + /* Some designs have the LEDs wired to the MAC */ + return ixgbe_led_on_generic(hw, led_idx); } /** @@ -4634,7 +4588,8 @@ s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx) ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data); - return IXGBE_SUCCESS; + /* Some designs have the LEDs wired to the MAC */ + return ixgbe_led_off_generic(hw, led_idx); } /** @@ -4697,3 +4652,18 @@ s32 ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min, return ret_val; } + +/** + * ixgbe_fw_recovery_mode_X550 - Check FW NVM recovery mode + * @hw: pointer t hardware structure + * + * Returns true if in FW NVM recovery mode. + **/ +bool ixgbe_fw_recovery_mode_X550(struct ixgbe_hw *hw) +{ + u32 fwsm; + + fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM_BY_MAC(hw)); + + return !!(fwsm & IXGBE_FWSM_FW_NVM_RECOVERY_MODE); +}