X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Fbase%2Fixgbe_x550.c;h=de97768e801cec5a8a4e56c52ae0e4bc4447fb71;hb=1b665ccd9cd73499e934b807bec2fd77193912ef;hp=319aa0d7f51056e98070555fc530832d17aada2a;hpb=e9c72a4129abc8f5b405ac8b798ab6720d8866b9;p=dpdk.git diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c index 319aa0d7f5..d5bbfadd41 100644 --- a/drivers/net/ixgbe/base/ixgbe_x550.c +++ b/drivers/net/ixgbe/base/ixgbe_x550.c @@ -1,35 +1,6 @@ -/******************************************************************************* - -Copyright (c) 2001-2015, Intel Corporation -All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are met: - - 1. Redistributions of source code must retain the above copyright notice, - this list of conditions and the following disclaimer. - - 2. Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - 3. Neither the name of the Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived from - this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE -LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -***************************************************************************/ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2001-2018 + */ #include "ixgbe_x550.h" #include "ixgbe_x540.h" @@ -38,6 +9,10 @@ POSSIBILITY OF SUCH DAMAGE. #include "ixgbe_common.h" #include "ixgbe_phy.h" +STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed); +STATIC s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *, u32 mask); +STATIC void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *, u32 mask); +STATIC s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw); /** * ixgbe_init_ops_X550 - Inits func ptrs and MAC type @@ -58,7 +33,7 @@ s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw) mac->ops.dmac_config = ixgbe_dmac_config_X550; mac->ops.dmac_config_tcs = ixgbe_dmac_config_tcs_X550; mac->ops.dmac_update_tcs = ixgbe_dmac_update_tcs_X550; - mac->ops.setup_eee = ixgbe_setup_eee_X550; + mac->ops.setup_eee = NULL; mac->ops.set_source_address_pruning = ixgbe_set_source_address_pruning_X550; mac->ops.set_ethertype_anti_spoofing = @@ -78,7 +53,23 @@ s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw) mac->ops.enable_mdd = ixgbe_enable_mdd_X550; mac->ops.mdd_event = ixgbe_mdd_event_X550; mac->ops.restore_mdd_vf = ixgbe_restore_mdd_vf_X550; + mac->ops.fw_recovery_mode = ixgbe_fw_recovery_mode_X550; mac->ops.disable_rx = ixgbe_disable_rx_x550; + /* Manageability interface */ + mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_x550; + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_1G_T: + hw->mac.ops.led_on = NULL; + hw->mac.ops.led_off = NULL; + break; + case IXGBE_DEV_ID_X550EM_X_10G_T: + case IXGBE_DEV_ID_X550EM_A_10G_T: + hw->mac.ops.led_on = ixgbe_led_on_t_X550em; + hw->mac.ops.led_off = ixgbe_led_off_t_X550em; + break; + default: + break; + } return ret_val; } @@ -92,7 +83,7 @@ s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw) **/ STATIC s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value) { - return ixgbe_read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, value); + return hw->link.ops.read_link_unlocked(hw, hw->link.addr, reg, value); } /** @@ -105,43 +96,7 @@ STATIC s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value) **/ STATIC s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value) { - return ixgbe_write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, value); -} - -/** - * ixgbe_get_cs4227_status - Return CS4227 status - * @hw: pointer to hardware structure - * - * Returns error if CS4227 not successfully initialized - **/ -STATIC s32 ixgbe_get_cs4227_status(struct ixgbe_hw *hw) -{ - s32 status; - u16 value = 0; - u8 retry; - - for (retry = 0; retry < IXGBE_CS4227_RETRIES; ++retry) { - status = ixgbe_read_cs4227(hw, IXGBE_CS4227_GLOBAL_ID_LSB, - &value); - if (status != IXGBE_SUCCESS) - return status; - if (value == IXGBE_CS4227_GLOBAL_ID_VALUE) - break; - msec_delay(IXGBE_CS4227_CHECK_DELAY); - } - if (value != IXGBE_CS4227_GLOBAL_ID_VALUE) - return IXGBE_ERR_PHY; - - status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, - IXGBE_CS4227_SCRATCH_VALUE); - if (status != IXGBE_SUCCESS) - return status; - status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); - if (status != IXGBE_SUCCESS) - return status; - if (value != IXGBE_CS4227_SCRATCH_VALUE) - return IXGBE_ERR_PHY; - return IXGBE_SUCCESS; + return hw->link.ops.write_link_unlocked(hw, hw->link.addr, reg, value); } /** @@ -186,13 +141,17 @@ STATIC s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value) * ixgbe_reset_cs4227 - Reset CS4227 using port expander * @hw: pointer to hardware structure * + * This function assumes that the caller has acquired the proper semaphore. * Returns error code **/ STATIC s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) { s32 status; + u32 retry; + u16 value; u8 reg; + /* Trigger hard reset. */ status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); if (status != IXGBE_SUCCESS) return status; @@ -227,7 +186,29 @@ STATIC s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) if (status != IXGBE_SUCCESS) return status; + /* Wait for the reset to complete. */ msec_delay(IXGBE_CS4227_RESET_DELAY); + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS, + &value); + if (status == IXGBE_SUCCESS && + value == IXGBE_CS4227_EEPROM_LOAD_OK) + break; + msec_delay(IXGBE_CS4227_CHECK_DELAY); + } + if (retry == IXGBE_CS4227_RETRIES) { + ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE, + "CS4227 reset did not complete."); + return IXGBE_ERR_PHY; + } + + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value); + if (status != IXGBE_SUCCESS || + !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) { + ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE, + "CS4227 EEPROM did not load successfully."); + return IXGBE_ERR_PHY; + } return IXGBE_SUCCESS; } @@ -238,29 +219,75 @@ STATIC s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) **/ STATIC void ixgbe_check_cs4227(struct ixgbe_hw *hw) { + s32 status = IXGBE_SUCCESS; u32 swfw_mask = hw->phy.phy_semaphore_mask; - s32 status; + u16 value = 0; u8 retry; for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); if (status != IXGBE_SUCCESS) { ERROR_REPORT2(IXGBE_ERROR_CAUTION, - "semaphore failed with %d\n", status); - return; + "semaphore failed with %d", status); + msec_delay(IXGBE_CS4227_CHECK_DELAY); + continue; } - status = ixgbe_get_cs4227_status(hw); - if (status == IXGBE_SUCCESS) { - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - msec_delay(hw->eeprom.semaphore_delay); + + /* Get status of reset flow. */ + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); + + if (status == IXGBE_SUCCESS && + value == IXGBE_CS4227_RESET_COMPLETE) + goto out; + + if (status != IXGBE_SUCCESS || + value != IXGBE_CS4227_RESET_PENDING) + break; + + /* Reset is pending. Wait and check again. */ + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msec_delay(IXGBE_CS4227_CHECK_DELAY); + } + + /* If still pending, assume other instance failed. */ + if (retry == IXGBE_CS4227_RETRIES) { + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status != IXGBE_SUCCESS) { + ERROR_REPORT2(IXGBE_ERROR_CAUTION, + "semaphore failed with %d", status); return; } - ixgbe_reset_cs4227(hw); - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - msec_delay(hw->eeprom.semaphore_delay); } - ERROR_REPORT2(IXGBE_ERROR_CAUTION, - "Unable to initialize CS4227, err=%d\n", status); + + /* Reset the CS4227. */ + status = ixgbe_reset_cs4227(hw); + if (status != IXGBE_SUCCESS) { + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "CS4227 reset failed: %d", status); + goto out; + } + + /* Reset takes so long, temporarily release semaphore in case the + * other driver instance is waiting for the reset indication. + */ + ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_PENDING); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msec_delay(10); + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status != IXGBE_SUCCESS) { + ERROR_REPORT2(IXGBE_ERROR_CAUTION, + "semaphore failed with %d", status); + return; + } + + /* Record completion for next time. */ + status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_COMPLETE); + +out: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msec_delay(hw->eeprom.semaphore_delay); } /** @@ -288,30 +315,180 @@ STATIC void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw) */ STATIC s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) { + hw->mac.ops.set_lan_id(hw); + + ixgbe_read_mng_if_sel_x550em(hw); + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_SFP: + return ixgbe_identify_module_generic(hw); case IXGBE_DEV_ID_X550EM_X_SFP: /* set up for CS4227 usage */ - hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; ixgbe_setup_mux_ctl(hw); ixgbe_check_cs4227(hw); + /* Fallthrough */ + case IXGBE_DEV_ID_X550EM_A_SFP_N: return ixgbe_identify_module_generic(hw); break; case IXGBE_DEV_ID_X550EM_X_KX4: hw->phy.type = ixgbe_phy_x550em_kx4; break; + case IXGBE_DEV_ID_X550EM_X_XFI: + hw->phy.type = ixgbe_phy_x550em_xfi; + break; case IXGBE_DEV_ID_X550EM_X_KR: + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: hw->phy.type = ixgbe_phy_x550em_kr; break; - case IXGBE_DEV_ID_X550EM_X_1G_T: + case IXGBE_DEV_ID_X550EM_A_10G_T: case IXGBE_DEV_ID_X550EM_X_10G_T: return ixgbe_identify_phy_generic(hw); + case IXGBE_DEV_ID_X550EM_X_1G_T: + hw->phy.type = ixgbe_phy_ext_1g_t; + break; + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: + hw->phy.type = ixgbe_phy_fw; + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM; + break; default: break; } return IXGBE_SUCCESS; } +/** + * ixgbe_fw_phy_activity - Perform an activity on a PHY + * @hw: pointer to hardware structure + * @activity: activity to perform + * @data: Pointer to 4 32-bit words of data + */ +s32 ixgbe_fw_phy_activity(struct ixgbe_hw *hw, u16 activity, + u32 (*data)[FW_PHY_ACT_DATA_COUNT]) +{ + union { + struct ixgbe_hic_phy_activity_req cmd; + struct ixgbe_hic_phy_activity_resp rsp; + } hic; + u16 retries = FW_PHY_ACT_RETRIES; + s32 rc; + u16 i; + + do { + memset(&hic, 0, sizeof(hic)); + hic.cmd.hdr.cmd = FW_PHY_ACT_REQ_CMD; + hic.cmd.hdr.buf_len = FW_PHY_ACT_REQ_LEN; + hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + hic.cmd.port_number = hw->bus.lan_id; + hic.cmd.activity_id = IXGBE_CPU_TO_LE16(activity); + for (i = 0; i < FW_PHY_ACT_DATA_COUNT; ++i) + hic.cmd.data[i] = IXGBE_CPU_TO_BE32((*data)[i]); + + rc = ixgbe_host_interface_command(hw, (u32 *)&hic.cmd, + sizeof(hic.cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); + if (rc != IXGBE_SUCCESS) + return rc; + if (hic.rsp.hdr.cmd_or_resp.ret_status == + FW_CEM_RESP_STATUS_SUCCESS) { + for (i = 0; i < FW_PHY_ACT_DATA_COUNT; ++i) + (*data)[i] = IXGBE_BE32_TO_CPU(hic.rsp.data[i]); + return IXGBE_SUCCESS; + } + usec_delay(20); + --retries; + } while (retries > 0); + + return IXGBE_ERR_HOST_INTERFACE_COMMAND; +} + +static const struct { + u16 fw_speed; + ixgbe_link_speed phy_speed; +} ixgbe_fw_map[] = { + { FW_PHY_ACT_LINK_SPEED_10, IXGBE_LINK_SPEED_10_FULL }, + { FW_PHY_ACT_LINK_SPEED_100, IXGBE_LINK_SPEED_100_FULL }, + { FW_PHY_ACT_LINK_SPEED_1G, IXGBE_LINK_SPEED_1GB_FULL }, + { FW_PHY_ACT_LINK_SPEED_2_5G, IXGBE_LINK_SPEED_2_5GB_FULL }, + { FW_PHY_ACT_LINK_SPEED_5G, IXGBE_LINK_SPEED_5GB_FULL }, + { FW_PHY_ACT_LINK_SPEED_10G, IXGBE_LINK_SPEED_10GB_FULL }, +}; + +/** + * ixgbe_get_phy_id_fw - Get the phy ID via firmware command + * @hw: pointer to hardware structure + * + * Returns error code + */ +static s32 ixgbe_get_phy_id_fw(struct ixgbe_hw *hw) +{ + u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 }; + u16 phy_speeds; + u16 phy_id_lo; + s32 rc; + u16 i; + + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_PHY_INFO, &info); + if (rc) + return rc; + + hw->phy.speeds_supported = 0; + phy_speeds = info[0] & FW_PHY_INFO_SPEED_MASK; + for (i = 0; i < sizeof(ixgbe_fw_map) / sizeof(ixgbe_fw_map[0]); ++i) { + if (phy_speeds & ixgbe_fw_map[i].fw_speed) + hw->phy.speeds_supported |= ixgbe_fw_map[i].phy_speed; + } + if (!hw->phy.autoneg_advertised) + hw->phy.autoneg_advertised = hw->phy.speeds_supported; + + hw->phy.id = info[0] & FW_PHY_INFO_ID_HI_MASK; + phy_id_lo = info[1] & FW_PHY_INFO_ID_LO_MASK; + hw->phy.id |= phy_id_lo & IXGBE_PHY_REVISION_MASK; + hw->phy.revision = phy_id_lo & ~IXGBE_PHY_REVISION_MASK; + if (!hw->phy.id || hw->phy.id == IXGBE_PHY_REVISION_MASK) + return IXGBE_ERR_PHY_ADDR_INVALID; + return IXGBE_SUCCESS; +} + +/** + * ixgbe_identify_phy_fw - Get PHY type based on firmware command + * @hw: pointer to hardware structure + * + * Returns error code + */ +static s32 ixgbe_identify_phy_fw(struct ixgbe_hw *hw) +{ + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; + + hw->phy.type = ixgbe_phy_fw; + hw->phy.ops.read_reg = NULL; + hw->phy.ops.write_reg = NULL; + return ixgbe_get_phy_id_fw(hw); +} + +/** + * ixgbe_shutdown_fw_phy - Shutdown a firmware-controlled PHY + * @hw: pointer to hardware structure + * + * Returns error code + */ +s32 ixgbe_shutdown_fw_phy(struct ixgbe_hw *hw) +{ + u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 }; + + setup[0] = FW_PHY_ACT_FORCE_LINK_DOWN_OFF; + return ixgbe_fw_phy_activity(hw, FW_PHY_ACT_FORCE_LINK_DOWN, &setup); +} + STATIC s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u16 *phy_data) { @@ -326,6 +503,68 @@ STATIC s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr, return IXGBE_NOT_IMPLEMENTED; } +/** + * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * + * Returns an error code on error. + **/ +STATIC s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val) +{ + return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, true); +} + +/** + * ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to read from + * @reg: I2C device register to read from + * @val: pointer to location to receive read value + * + * Returns an error code on error. + **/ +STATIC s32 +ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr, + u16 reg, u16 *val) +{ + return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, false); +} + +/** + * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * + * Returns an error code on error. + **/ +STATIC s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, + u8 addr, u16 reg, u16 val) +{ + return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, true); +} + +/** + * ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation + * @hw: pointer to the hardware structure + * @addr: I2C bus address to write to + * @reg: I2C device register to write to + * @val: value to write + * + * Returns an error code on error. + **/ +STATIC s32 +ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, + u8 addr, u16 reg, u16 val) +{ + return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, false); +} + /** * ixgbe_init_ops_X550EM - Inits func ptrs and MAC type * @hw: pointer to hardware structure @@ -365,12 +604,15 @@ s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw) mac->ops.disable_sec_rx_path = NULL; mac->ops.enable_sec_rx_path = NULL; + /* AUTOC register is not present in x550EM. */ + mac->ops.prot_autoc_read = NULL; + mac->ops.prot_autoc_write = NULL; + /* X550EM bus type is internal*/ hw->bus.type = ixgbe_bus_type_internal; mac->ops.get_bus_info = ixgbe_get_bus_info_X550em; - mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550; - mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550; + mac->ops.get_media_type = ixgbe_get_media_type_X550em; mac->ops.setup_sfp = ixgbe_setup_sfp_modules_X550em; mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_X550em; @@ -378,9 +620,30 @@ s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw) mac->ops.get_supported_physical_layer = ixgbe_get_supported_physical_layer_X550em; + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) + mac->ops.setup_fc = ixgbe_setup_fc_generic; + else + mac->ops.setup_fc = ixgbe_setup_fc_X550em; + /* PHY */ phy->ops.init = ixgbe_init_phy_ops_X550em; - phy->ops.identify = ixgbe_identify_phy_x550em; + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: + mac->ops.setup_fc = NULL; + phy->ops.identify = ixgbe_identify_phy_fw; + phy->ops.set_phy_power = NULL; + phy->ops.get_firmware_version = NULL; + break; + case IXGBE_DEV_ID_X550EM_X_1G_T: + mac->ops.setup_fc = NULL; + phy->ops.identify = ixgbe_identify_phy_x550em; + phy->ops.set_phy_power = NULL; + break; + default: + phy->ops.identify = ixgbe_identify_phy_x550em; + } + if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper) phy->ops.set_phy_power = NULL; @@ -399,81 +662,264 @@ s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw) } /** - * ixgbe_dmac_config_X550 - * @hw: pointer to hardware structure - * - * Configure DMA coalescing. If enabling dmac, dmac is activated. - * When disabling dmac, dmac enable dmac bit is cleared. - **/ -s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw) + * ixgbe_setup_fw_link - Setup firmware-controlled PHYs + * @hw: pointer to hardware structure + */ +static s32 ixgbe_setup_fw_link(struct ixgbe_hw *hw) { - u32 reg, high_pri_tc; - - DEBUGFUNC("ixgbe_dmac_config_X550"); - - /* Disable DMA coalescing before configuring */ - reg = IXGBE_READ_REG(hw, IXGBE_DMACR); - reg &= ~IXGBE_DMACR_DMAC_EN; - IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg); - - /* Disable DMA Coalescing if the watchdog timer is 0 */ - if (!hw->mac.dmac_config.watchdog_timer) - goto out; + u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 }; + s32 rc; + u16 i; - ixgbe_dmac_config_tcs_X550(hw); + if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw)) + return 0; - /* Configure DMA Coalescing Control Register */ - reg = IXGBE_READ_REG(hw, IXGBE_DMACR); + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } - /* Set the watchdog timer in units of 40.96 usec */ - reg &= ~IXGBE_DMACR_DMACWT_MASK; - reg |= (hw->mac.dmac_config.watchdog_timer * 100) / 4096; + switch (hw->fc.requested_mode) { + case ixgbe_fc_full: + setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RXTX << + FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; + break; + case ixgbe_fc_rx_pause: + setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RX << + FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; + break; + case ixgbe_fc_tx_pause: + setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_TX << + FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; + break; + default: + break; + } - reg &= ~IXGBE_DMACR_HIGH_PRI_TC_MASK; - /* If fcoe is enabled, set high priority traffic class */ - if (hw->mac.dmac_config.fcoe_en) { - high_pri_tc = 1 << hw->mac.dmac_config.fcoe_tc; - reg |= ((high_pri_tc << IXGBE_DMACR_HIGH_PRI_TC_SHIFT) & - IXGBE_DMACR_HIGH_PRI_TC_MASK); + for (i = 0; i < sizeof(ixgbe_fw_map) / sizeof(ixgbe_fw_map[0]); ++i) { + if (hw->phy.autoneg_advertised & ixgbe_fw_map[i].phy_speed) + setup[0] |= ixgbe_fw_map[i].fw_speed; } - reg |= IXGBE_DMACR_EN_MNG_IND; + setup[0] |= FW_PHY_ACT_SETUP_LINK_HP | FW_PHY_ACT_SETUP_LINK_AN; - /* Enable DMA coalescing after configuration */ - reg |= IXGBE_DMACR_DMAC_EN; - IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg); + if (hw->phy.eee_speeds_advertised) + setup[0] |= FW_PHY_ACT_SETUP_LINK_EEE; -out: + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_SETUP_LINK, &setup); + if (rc) + return rc; + if (setup[0] == FW_PHY_ACT_SETUP_LINK_RSP_DOWN) + return IXGBE_ERR_OVERTEMP; return IXGBE_SUCCESS; } /** - * ixgbe_dmac_config_tcs_X550 - * @hw: pointer to hardware structure + * ixgbe_fc_autoneg_fw _ Set up flow control for FW-controlled PHYs + * @hw: pointer to hardware structure * - * Configure DMA coalescing threshold per TC. The dmac enable bit must - * be cleared before configuring. - **/ -s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw) + * Called at init time to set up flow control. + */ +static s32 ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw) { - u32 tc, reg, pb_headroom, rx_pb_size, maxframe_size_kb; + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; - DEBUGFUNC("ixgbe_dmac_config_tcs_X550"); - - /* Configure DMA coalescing enabled */ - switch (hw->mac.dmac_config.link_speed) { - case IXGBE_LINK_SPEED_100_FULL: - pb_headroom = IXGBE_DMACRXT_100M; - break; - case IXGBE_LINK_SPEED_1GB_FULL: - pb_headroom = IXGBE_DMACRXT_1G; - break; - default: - pb_headroom = IXGBE_DMACRXT_10G; - break; - } + return ixgbe_setup_fw_link(hw); +} - maxframe_size_kb = ((IXGBE_READ_REG(hw, IXGBE_MAXFRS) >> - IXGBE_MHADD_MFS_SHIFT) / 1024); +/** + * ixgbe_setup_eee_fw - Enable/disable EEE support + * @hw: pointer to the HW structure + * @enable_eee: boolean flag to enable EEE + * + * Enable/disable EEE based on enable_eee flag. + * This function controls EEE for firmware-based PHY implementations. + */ +static s32 ixgbe_setup_eee_fw(struct ixgbe_hw *hw, bool enable_eee) +{ + if (!!hw->phy.eee_speeds_advertised == enable_eee) + return IXGBE_SUCCESS; + if (enable_eee) + hw->phy.eee_speeds_advertised = hw->phy.eee_speeds_supported; + else + hw->phy.eee_speeds_advertised = 0; + return hw->phy.ops.setup_link(hw); +} + +/** +* ixgbe_init_ops_X550EM_a - Inits func ptrs and MAC type +* @hw: pointer to hardware structure +* +* Initialize the function pointers and for MAC type X550EM_a. +* Does not touch the hardware. +**/ +s32 ixgbe_init_ops_X550EM_a(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + s32 ret_val; + + DEBUGFUNC("ixgbe_init_ops_X550EM_a"); + + /* Start with generic X550EM init */ + ret_val = ixgbe_init_ops_X550EM(hw); + + if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII || + hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L) { + mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550; + mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550; + } else { + mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550a; + mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550a; + } + mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550a; + mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550a; + + switch (mac->ops.get_media_type(hw)) { + case ixgbe_media_type_fiber: + mac->ops.setup_fc = NULL; + mac->ops.fc_autoneg = ixgbe_fc_autoneg_fiber_x550em_a; + break; + case ixgbe_media_type_backplane: + mac->ops.fc_autoneg = ixgbe_fc_autoneg_backplane_x550em_a; + mac->ops.setup_fc = ixgbe_setup_fc_backplane_x550em_a; + break; + default: + break; + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: + mac->ops.fc_autoneg = ixgbe_fc_autoneg_sgmii_x550em_a; + mac->ops.setup_fc = ixgbe_fc_autoneg_fw; + mac->ops.setup_eee = ixgbe_setup_eee_fw; + hw->phy.eee_speeds_supported = IXGBE_LINK_SPEED_100_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + hw->phy.eee_speeds_advertised = hw->phy.eee_speeds_supported; + break; + default: + break; + } + + return ret_val; +} + +/** +* ixgbe_init_ops_X550EM_x - Inits func ptrs and MAC type +* @hw: pointer to hardware structure +* +* Initialize the function pointers and for MAC type X550EM_x. +* Does not touch the hardware. +**/ +s32 ixgbe_init_ops_X550EM_x(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_link_info *link = &hw->link; + s32 ret_val; + + DEBUGFUNC("ixgbe_init_ops_X550EM_x"); + + /* Start with generic X550EM init */ + ret_val = ixgbe_init_ops_X550EM(hw); + + mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550; + mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550; + mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em; + mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em; + link->ops.read_link = ixgbe_read_i2c_combined_generic; + link->ops.read_link_unlocked = ixgbe_read_i2c_combined_generic_unlocked; + link->ops.write_link = ixgbe_write_i2c_combined_generic; + link->ops.write_link_unlocked = + ixgbe_write_i2c_combined_generic_unlocked; + link->addr = IXGBE_CS4227; + + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_1G_T) { + mac->ops.setup_fc = NULL; + mac->ops.setup_eee = NULL; + mac->ops.init_led_link_act = NULL; + } + + return ret_val; +} + +/** + * ixgbe_dmac_config_X550 + * @hw: pointer to hardware structure + * + * Configure DMA coalescing. If enabling dmac, dmac is activated. + * When disabling dmac, dmac enable dmac bit is cleared. + **/ +s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw) +{ + u32 reg, high_pri_tc; + + DEBUGFUNC("ixgbe_dmac_config_X550"); + + /* Disable DMA coalescing before configuring */ + reg = IXGBE_READ_REG(hw, IXGBE_DMACR); + reg &= ~IXGBE_DMACR_DMAC_EN; + IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg); + + /* Disable DMA Coalescing if the watchdog timer is 0 */ + if (!hw->mac.dmac_config.watchdog_timer) + goto out; + + ixgbe_dmac_config_tcs_X550(hw); + + /* Configure DMA Coalescing Control Register */ + reg = IXGBE_READ_REG(hw, IXGBE_DMACR); + + /* Set the watchdog timer in units of 40.96 usec */ + reg &= ~IXGBE_DMACR_DMACWT_MASK; + reg |= (hw->mac.dmac_config.watchdog_timer * 100) / 4096; + + reg &= ~IXGBE_DMACR_HIGH_PRI_TC_MASK; + /* If fcoe is enabled, set high priority traffic class */ + if (hw->mac.dmac_config.fcoe_en) { + high_pri_tc = 1 << hw->mac.dmac_config.fcoe_tc; + reg |= ((high_pri_tc << IXGBE_DMACR_HIGH_PRI_TC_SHIFT) & + IXGBE_DMACR_HIGH_PRI_TC_MASK); + } + reg |= IXGBE_DMACR_EN_MNG_IND; + + /* Enable DMA coalescing after configuration */ + reg |= IXGBE_DMACR_DMAC_EN; + IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg); + +out: + return IXGBE_SUCCESS; +} + +/** + * ixgbe_dmac_config_tcs_X550 + * @hw: pointer to hardware structure + * + * Configure DMA coalescing threshold per TC. The dmac enable bit must + * be cleared before configuring. + **/ +s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw) +{ + u32 tc, reg, pb_headroom, rx_pb_size, maxframe_size_kb; + + DEBUGFUNC("ixgbe_dmac_config_tcs_X550"); + + /* Configure DMA coalescing enabled */ + switch (hw->mac.dmac_config.link_speed) { + case IXGBE_LINK_SPEED_10_FULL: + case IXGBE_LINK_SPEED_100_FULL: + pb_headroom = IXGBE_DMACRXT_100M; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + pb_headroom = IXGBE_DMACRXT_1G; + break; + default: + pb_headroom = IXGBE_DMACRXT_10G; + break; + } + + maxframe_size_kb = ((IXGBE_READ_REG(hw, IXGBE_MAXFRS) >> + IXGBE_MHADD_MFS_SHIFT) / 1024); /* Set the per Rx packet buffer receive threshold */ for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++) { @@ -560,93 +1006,6 @@ s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw) return IXGBE_SUCCESS; } -/** - * ixgbe_setup_eee_X550 - Enable/disable EEE support - * @hw: pointer to the HW structure - * @enable_eee: boolean flag to enable EEE - * - * Enable/disable EEE based on enable_eee flag. - * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C - * are modified. - * - **/ -s32 ixgbe_setup_eee_X550(struct ixgbe_hw *hw, bool enable_eee) -{ - u32 eeer; - u16 autoneg_eee_reg; - u32 link_reg; - s32 status; - - DEBUGFUNC("ixgbe_setup_eee_X550"); - - eeer = IXGBE_READ_REG(hw, IXGBE_EEER); - /* Enable or disable EEE per flag */ - if (enable_eee) { - eeer |= (IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN); - - if (hw->device_id == IXGBE_DEV_ID_X550T) { - /* Advertise EEE capability */ - hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg); - - autoneg_eee_reg |= (IXGBE_AUTO_NEG_10GBASE_EEE_ADVT | - IXGBE_AUTO_NEG_1000BASE_EEE_ADVT | - IXGBE_AUTO_NEG_100BASE_EEE_ADVT); - - hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg); - } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) { - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg); - if (status != IXGBE_SUCCESS) - return status; - - link_reg |= IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR | - IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX; - - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg); - if (status != IXGBE_SUCCESS) - return status; - } - } else { - eeer &= ~(IXGBE_EEER_TX_LPI_EN | IXGBE_EEER_RX_LPI_EN); - - if (hw->device_id == IXGBE_DEV_ID_X550T) { - /* Disable advertised EEE capability */ - hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_eee_reg); - - autoneg_eee_reg &= ~(IXGBE_AUTO_NEG_10GBASE_EEE_ADVT | - IXGBE_AUTO_NEG_1000BASE_EEE_ADVT | - IXGBE_AUTO_NEG_100BASE_EEE_ADVT); - - hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_EEE_ADVT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_eee_reg); - } else if (hw->device_id == IXGBE_DEV_ID_X550EM_X_KR) { - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, &link_reg); - if (status != IXGBE_SUCCESS) - return status; - - link_reg &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR | - IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX); - - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, link_reg); - if (status != IXGBE_SUCCESS) - return status; - } - } - IXGBE_WRITE_REG(hw, IXGBE_EEER, eeer); - - return IXGBE_SUCCESS; -} - /** * ixgbe_set_source_address_pruning_X550 - Enable/Disbale source address pruning * @hw: pointer to hardware structure @@ -700,8 +1059,41 @@ void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw, } /** - * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF - * device + * ixgbe_iosf_wait - Wait for IOSF command completion + * @hw: pointer to hardware structure + * @ctrl: pointer to location to receive final IOSF control value + * + * Returns failing status on timeout + * + * Note: ctrl can be NULL if the IOSF control register value is not needed + **/ +STATIC s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl) +{ + u32 i, command = 0; + + /* Check every 10 usec to see if the address cycle completed. + * The SB IOSF BUSY bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL); + if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0) + break; + usec_delay(10); + } + if (ctrl) + *ctrl = command; + if (i == IXGBE_MDIO_COMMAND_TIMEOUT) { + ERROR_REPORT1(IXGBE_ERROR_POLLING, "Wait timed out\n"); + return IXGBE_ERR_PHY; + } + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register + * of the IOSF device * @hw: pointer to hardware structure * @reg_addr: 32 bit PHY register to write * @device_type: 3 bit device type @@ -710,7 +1102,17 @@ void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw, s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u32 data) { - u32 i, command, error; + u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM; + u32 command, error; + s32 ret; + + ret = ixgbe_acquire_swfw_semaphore(hw, gssr); + if (ret != IXGBE_SUCCESS) + return ret; + + ret = ixgbe_iosf_wait(hw, NULL); + if (ret != IXGBE_SUCCESS) + goto out; command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) | (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT)); @@ -720,47 +1122,43 @@ s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, /* Write IOSF data register */ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data); - /* - * Check every 10 usec to see if the address cycle completed. - * The SB IOSF BUSY bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - usec_delay(10); - command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL); - if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0) - break; - } + ret = ixgbe_iosf_wait(hw, &command); if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) { error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >> IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT; ERROR_REPORT2(IXGBE_ERROR_POLLING, "Failed to write, error %x\n", error); - return IXGBE_ERR_PHY; - } - - if (i == IXGBE_MDIO_COMMAND_TIMEOUT) { - ERROR_REPORT1(IXGBE_ERROR_POLLING, "Write timed out\n"); - return IXGBE_ERR_PHY; + ret = IXGBE_ERR_PHY; } - return IXGBE_SUCCESS; +out: + ixgbe_release_swfw_semaphore(hw, gssr); + return ret; } /** - * ixgbe_read_iosf_sb_reg_x550 - Writes a value to specified register of the IOSF - * device + * ixgbe_read_iosf_sb_reg_x550 - Reads specified register of the IOSF device * @hw: pointer to hardware structure * @reg_addr: 32 bit PHY register to write * @device_type: 3 bit device type - * @phy_data: Pointer to read data from the register + * @data: Pointer to read data from the register **/ s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, u32 *data) { - u32 i, command, error; + u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM; + u32 command, error; + s32 ret; + + ret = ixgbe_acquire_swfw_semaphore(hw, gssr); + if (ret != IXGBE_SUCCESS) + return ret; + + ret = ixgbe_iosf_wait(hw, NULL); + if (ret != IXGBE_SUCCESS) + goto out; command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) | (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT)); @@ -768,67 +1166,188 @@ s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, /* Write IOSF control register */ IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command); - /* - * Check every 10 usec to see if the address cycle completed. - * The SB IOSF BUSY bit will clear when the operation is - * complete - */ - for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { - usec_delay(10); - - command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL); - if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0) - break; - } + ret = ixgbe_iosf_wait(hw, &command); if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) { error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >> IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT; ERROR_REPORT2(IXGBE_ERROR_POLLING, "Failed to read, error %x\n", error); - return IXGBE_ERR_PHY; - } - - if (i == IXGBE_MDIO_COMMAND_TIMEOUT) { - ERROR_REPORT1(IXGBE_ERROR_POLLING, "Read timed out\n"); - return IXGBE_ERR_PHY; + ret = IXGBE_ERR_PHY; } - *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA); + if (ret == IXGBE_SUCCESS) + *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA); - return IXGBE_SUCCESS; +out: + ixgbe_release_swfw_semaphore(hw, gssr); + return ret; } /** - * ixgbe_disable_mdd_X550 - * @hw: pointer to hardware structure - * - * Disable malicious driver detection - **/ -void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw) + * ixgbe_get_phy_token - Get the token for shared phy access + * @hw: Pointer to hardware structure + */ + +s32 ixgbe_get_phy_token(struct ixgbe_hw *hw) { - u32 reg; + struct ixgbe_hic_phy_token_req token_cmd; + s32 status; - DEBUGFUNC("ixgbe_disable_mdd_X550"); + token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD; + token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN; + token_cmd.hdr.cmd_or_resp.cmd_resv = 0; + token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + token_cmd.port_number = hw->bus.lan_id; + token_cmd.command_type = FW_PHY_TOKEN_REQ; + token_cmd.pad = 0; + status = ixgbe_host_interface_command(hw, (u32 *)&token_cmd, + sizeof(token_cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); + if (status) { + DEBUGOUT1("Issuing host interface command failed with Status = %d\n", + status); + return status; + } + if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK) + return IXGBE_SUCCESS; + if (token_cmd.hdr.cmd_or_resp.ret_status != FW_PHY_TOKEN_RETRY) { + DEBUGOUT1("Host interface command returned 0x%08x , returning IXGBE_ERR_FW_RESP_INVALID\n", + token_cmd.hdr.cmd_or_resp.ret_status); + return IXGBE_ERR_FW_RESP_INVALID; + } - /* Disable MDD for TX DMA and interrupt */ - reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL); - reg &= ~(IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN); - IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg); + DEBUGOUT("Returning IXGBE_ERR_TOKEN_RETRY\n"); + return IXGBE_ERR_TOKEN_RETRY; +} - /* Disable MDD for RX and interrupt */ - reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); - reg &= ~(IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN); - IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg); +/** + * ixgbe_put_phy_token - Put the token for shared phy access + * @hw: Pointer to hardware structure + */ + +s32 ixgbe_put_phy_token(struct ixgbe_hw *hw) +{ + struct ixgbe_hic_phy_token_req token_cmd; + s32 status; + + token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD; + token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN; + token_cmd.hdr.cmd_or_resp.cmd_resv = 0; + token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + token_cmd.port_number = hw->bus.lan_id; + token_cmd.command_type = FW_PHY_TOKEN_REL; + token_cmd.pad = 0; + status = ixgbe_host_interface_command(hw, (u32 *)&token_cmd, + sizeof(token_cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); + if (status) + return status; + if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK) + return IXGBE_SUCCESS; + + DEBUGOUT("Put PHY Token host interface command failed"); + return IXGBE_ERR_FW_RESP_INVALID; } /** - * ixgbe_enable_mdd_X550 + * ixgbe_write_iosf_sb_reg_x550a - Writes a value to specified register + * of the IOSF device * @hw: pointer to hardware structure - * - * Enable malicious driver detection + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @data: Data to write to the register **/ -void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw) +s32 ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u32 data) +{ + struct ixgbe_hic_internal_phy_req write_cmd; + s32 status; + UNREFERENCED_1PARAMETER(device_type); + + memset(&write_cmd, 0, sizeof(write_cmd)); + write_cmd.hdr.cmd = FW_INT_PHY_REQ_CMD; + write_cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN; + write_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + write_cmd.port_number = hw->bus.lan_id; + write_cmd.command_type = FW_INT_PHY_REQ_WRITE; + write_cmd.address = IXGBE_CPU_TO_BE16(reg_addr); + write_cmd.write_data = IXGBE_CPU_TO_BE32(data); + + status = ixgbe_host_interface_command(hw, (u32 *)&write_cmd, + sizeof(write_cmd), + IXGBE_HI_COMMAND_TIMEOUT, false); + + return status; +} + +/** + * ixgbe_read_iosf_sb_reg_x550a - Reads specified register of the IOSF device + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 3 bit device type + * @data: Pointer to read data from the register + **/ +s32 ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u32 *data) +{ + union { + struct ixgbe_hic_internal_phy_req cmd; + struct ixgbe_hic_internal_phy_resp rsp; + } hic; + s32 status; + UNREFERENCED_1PARAMETER(device_type); + + memset(&hic, 0, sizeof(hic)); + hic.cmd.hdr.cmd = FW_INT_PHY_REQ_CMD; + hic.cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN; + hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + hic.cmd.port_number = hw->bus.lan_id; + hic.cmd.command_type = FW_INT_PHY_REQ_READ; + hic.cmd.address = IXGBE_CPU_TO_BE16(reg_addr); + + status = ixgbe_host_interface_command(hw, (u32 *)&hic.cmd, + sizeof(hic.cmd), + IXGBE_HI_COMMAND_TIMEOUT, true); + + /* Extract the register value from the response. */ + *data = IXGBE_BE32_TO_CPU(hic.rsp.read_data); + + return status; +} + +/** + * ixgbe_disable_mdd_X550 + * @hw: pointer to hardware structure + * + * Disable malicious driver detection + **/ +void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw) +{ + u32 reg; + + DEBUGFUNC("ixgbe_disable_mdd_X550"); + + /* Disable MDD for TX DMA and interrupt */ + reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL); + reg &= ~(IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN); + IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg); + + /* Disable MDD for RX and interrupt */ + reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); + reg &= ~(IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN); + IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg); +} + +/** + * ixgbe_enable_mdd_X550 + * @hw: pointer to hardware structure + * + * Enable malicious driver detection + **/ +void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw) { u32 reg; @@ -958,13 +1477,30 @@ enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw) switch (hw->device_id) { case IXGBE_DEV_ID_X550EM_X_KR: case IXGBE_DEV_ID_X550EM_X_KX4: + case IXGBE_DEV_ID_X550EM_X_XFI: + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: media_type = ixgbe_media_type_backplane; break; case IXGBE_DEV_ID_X550EM_X_SFP: + case IXGBE_DEV_ID_X550EM_A_SFP: + case IXGBE_DEV_ID_X550EM_A_SFP_N: + case IXGBE_DEV_ID_X550EM_A_QSFP: + case IXGBE_DEV_ID_X550EM_A_QSFP_N: media_type = ixgbe_media_type_fiber; break; case IXGBE_DEV_ID_X550EM_X_1G_T: case IXGBE_DEV_ID_X550EM_X_10G_T: + case IXGBE_DEV_ID_X550EM_A_10G_T: + media_type = ixgbe_media_type_copper; + break; + case IXGBE_DEV_ID_X550EM_A_SGMII: + case IXGBE_DEV_ID_X550EM_A_SGMII_L: + media_type = ixgbe_media_type_backplane; + hw->phy.type = ixgbe_phy_sgmii; + break; + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: media_type = ixgbe_media_type_copper; break; default: @@ -975,25 +1511,20 @@ enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw) } /** - * ixgbe_setup_sfp_modules_X550em - Setup SFP module + * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported * @hw: pointer to hardware structure + * @linear: true if SFP module is linear */ -s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) +STATIC s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear) { - bool setup_linear; - u16 reg_slice, edc_mode; - s32 ret_val; - - DEBUGFUNC("ixgbe_setup_sfp_modules_X550em"); + DEBUGFUNC("ixgbe_supported_sfp_modules_X550em"); switch (hw->phy.sfp_type) { - case ixgbe_sfp_type_unknown: - return IXGBE_SUCCESS; case ixgbe_sfp_type_not_present: return IXGBE_ERR_SFP_NOT_PRESENT; case ixgbe_sfp_type_da_cu_core0: case ixgbe_sfp_type_da_cu_core1: - setup_linear = true; + *linear = true; break; case ixgbe_sfp_type_srlr_core0: case ixgbe_sfp_type_srlr_core1: @@ -1003,34 +1534,254 @@ s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) case ixgbe_sfp_type_1g_sx_core1: case ixgbe_sfp_type_1g_lx_core0: case ixgbe_sfp_type_1g_lx_core1: - setup_linear = false; + *linear = false; break; + case ixgbe_sfp_type_unknown: + case ixgbe_sfp_type_1g_cu_core0: + case ixgbe_sfp_type_1g_cu_core1: default: return IXGBE_ERR_SFP_NOT_SUPPORTED; } + return IXGBE_SUCCESS; +} + +/** + * ixgbe_identify_sfp_module_X550em - Identifies SFP modules + * @hw: pointer to hardware structure + * + * Searches for and identifies the SFP module and assigns appropriate PHY type. + **/ +s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw) +{ + s32 status; + bool linear; + + DEBUGFUNC("ixgbe_identify_sfp_module_X550em"); + + status = ixgbe_identify_module_generic(hw); + + if (status != IXGBE_SUCCESS) + return status; + + /* Check if SFP module is supported */ + status = ixgbe_supported_sfp_modules_X550em(hw, &linear); + + return status; +} + +/** + * ixgbe_setup_sfp_modules_X550em - Setup MAC link ops + * @hw: pointer to hardware structure + */ +s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) +{ + s32 status; + bool linear; + + DEBUGFUNC("ixgbe_setup_sfp_modules_X550em"); + + /* Check if SFP module is supported */ + status = ixgbe_supported_sfp_modules_X550em(hw, &linear); + + if (status != IXGBE_SUCCESS) + return status; + ixgbe_init_mac_link_ops_X550em(hw); hw->phy.ops.reset = NULL; - /* The CS4227 slice address is the base address + the port-pair reg - * offset. I.e. Slice 0 = 0x12B0 and slice 1 = 0x22B0. - */ - reg_slice = IXGBE_CS4227_SPARE24_LSB + (hw->bus.lan_id << 12); + return IXGBE_SUCCESS; +} - if (setup_linear) - edc_mode = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; - else - edc_mode = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; +/** +* ixgbe_restart_an_internal_phy_x550em - restart autonegotiation for the +* internal PHY +* @hw: pointer to hardware structure +**/ +STATIC s32 ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw *hw) +{ + s32 status; + u32 link_ctrl; - /* Configure CS4227 for connection type. */ - ret_val = ixgbe_write_i2c_combined(hw, IXGBE_CS4227, reg_slice, - edc_mode); + /* Restart auto-negotiation. */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &link_ctrl); - if (ret_val != IXGBE_SUCCESS) - ret_val = ixgbe_write_i2c_combined(hw, 0x80, reg_slice, - edc_mode); + if (status) { + DEBUGOUT("Auto-negotiation did not complete\n"); + return status; + } - return ret_val; + link_ctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, link_ctrl); + + if (hw->mac.type == ixgbe_mac_X550EM_a) { + u32 flx_mask_st20; + + /* Indicate to FW that AN restart has been asserted */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_mask_st20); + + if (status) { + DEBUGOUT("Auto-negotiation did not complete\n"); + return status; + } + + flx_mask_st20 |= IXGBE_KRM_PMD_FLX_MASK_ST20_FW_AN_RESTART; + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, flx_mask_st20); + } + + return status; +} + +#ifndef PREBOOT_SUPPORT +/** + * ixgbe_setup_sgmii - Set up link for sgmii + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait: true when waiting for completion is needed + */ +STATIC s32 ixgbe_setup_sgmii(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg_wait) +{ + struct ixgbe_mac_info *mac = &hw->mac; + u32 lval, sval, flx_val; + s32 rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &lval); + if (rc) + return rc; + + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, lval); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &sval); + if (rc) + return rc; + + sval |= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D; + sval |= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D; + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, sval); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val); + if (rc) + return rc; + + flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G; + flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; + + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val); + if (rc) + return rc; + + rc = ixgbe_restart_an_internal_phy_x550em(hw); + if (rc) + return rc; + + return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait); +} + +#endif /* PREBOOT_SUPPORT */ +/** + * ixgbe_setup_sgmii_fw - Set up link for internal PHY SGMII auto-negotiation + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait: true when waiting for completion is needed + */ +STATIC s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed, + bool autoneg_wait) +{ + struct ixgbe_mac_info *mac = &hw->mac; + u32 lval, sval, flx_val; + s32 rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &lval); + if (rc) + return rc; + + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN; + lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN; + lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, lval); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &sval); + if (rc) + return rc; + + sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D; + sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D; + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, sval); + if (rc) + return rc; + + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, lval); + if (rc) + return rc; + + rc = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val); + if (rc) + return rc; + + flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN; + flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; + flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; + + rc = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val); + if (rc) + return rc; + + rc = ixgbe_restart_an_internal_phy_x550em(hw); + + return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait); } /** @@ -1043,14 +1794,56 @@ void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) DEBUGFUNC("ixgbe_init_mac_link_ops_X550em"); - /* CS4227 does not support autoneg, so disable the laser control - * functions for SFP+ fiber - */ - if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) { + switch (hw->mac.ops.get_media_type(hw)) { + case ixgbe_media_type_fiber: + /* CS4227 does not support autoneg, so disable the laser control + * functions for SFP+ fiber + */ mac->ops.disable_tx_laser = NULL; mac->ops.enable_tx_laser = NULL; mac->ops.flap_tx_laser = NULL; - } + mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber; + mac->ops.set_rate_select_speed = + ixgbe_set_soft_rate_select_speed; + + if ((hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP_N) || + (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP)) + mac->ops.setup_mac_link = + ixgbe_setup_mac_link_sfp_x550a; + else + mac->ops.setup_mac_link = + ixgbe_setup_mac_link_sfp_x550em; + break; + case ixgbe_media_type_copper: + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_1G_T) + break; + if (hw->mac.type == ixgbe_mac_X550EM_a) { + if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T || + hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L) { + mac->ops.setup_link = ixgbe_setup_sgmii_fw; + mac->ops.check_link = + ixgbe_check_mac_link_generic; + } else { + mac->ops.setup_link = + ixgbe_setup_mac_link_t_X550em; + } + } else { + mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em; + mac->ops.check_link = ixgbe_check_link_t_X550em; + } + break; + case ixgbe_media_type_backplane: + if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII || + hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L) +#ifdef PREBOOT_SUPPORT + mac->ops.setup_link = ixgbe_setup_sgmii_fw; +#else + mac->ops.setup_link = ixgbe_setup_sgmii; +#endif /* PREBOOT_SUPPORT */ + break; + default: + break; + } } /** @@ -1065,6 +1858,13 @@ s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, { DEBUGFUNC("ixgbe_get_link_capabilities_X550em"); + + if (hw->phy.type == ixgbe_phy_fw) { + *autoneg = true; + *speed = hw->phy.speeds_supported; + return 0; + } + /* SFP */ if (hw->phy.media_type == ixgbe_media_type_fiber) { @@ -1087,8 +1887,40 @@ s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, else *speed = IXGBE_LINK_SPEED_10GB_FULL; } else { - *speed = IXGBE_LINK_SPEED_10GB_FULL | - IXGBE_LINK_SPEED_1GB_FULL; + switch (hw->phy.type) { + case ixgbe_phy_ext_1g_t: +#ifdef PREBOOT_SUPPORT + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; +#endif /* PREBOOT_SUPPORT */ + case ixgbe_phy_sgmii: +#ifdef PREBOOT_SUPPORT + *speed = IXGBE_LINK_SPEED_1GB_FULL | + IXGBE_LINK_SPEED_100_FULL | + IXGBE_LINK_SPEED_10_FULL; +#else + *speed = IXGBE_LINK_SPEED_1GB_FULL; +#endif /* PREBOOT_SUPPORT */ + break; + case ixgbe_phy_x550em_kr: + if (hw->mac.type == ixgbe_mac_X550EM_a) { + /* check different backplane modes */ + if (hw->phy.nw_mng_if_sel & + IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G) { + *speed = IXGBE_LINK_SPEED_2_5GB_FULL; + break; + } else if (hw->device_id == + IXGBE_DEV_ID_X550EM_A_KR_L) { + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + } + } + /* fall through */ + default: + *speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + break; + } *autoneg = true; } @@ -1096,269 +1928,188 @@ s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, } /** - * ixgbe_init_phy_ops_X550em - PHY/SFP specific init - * @hw: pointer to hardware structure + * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause + * @hw: pointer to hardware structure + * @lsc: pointer to boolean flag which indicates whether external Base T + * PHY interrupt is lsc * - * Initialize any function pointers that were not able to be - * set during init_shared_code because the PHY/SFP type was - * not known. Perform the SFP init if necessary. + * Determime if external Base T PHY interrupt cause is high temperature + * failure alarm or link status change. + * + * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature + * failure alarm, else return PHY access status. */ -s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) +STATIC s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) { - struct ixgbe_phy_info *phy = &hw->phy; - s32 ret_val; - - DEBUGFUNC("ixgbe_init_phy_ops_X550em"); - - if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) { - phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; - ixgbe_setup_mux_ctl(hw); - } + u32 status; + u16 reg; - /* Identify the PHY or SFP module */ - ret_val = phy->ops.identify(hw); - if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED) - return ret_val; + *lsc = false; - /* Setup function pointers based on detected SFP module and speeds */ - ixgbe_init_mac_link_ops_X550em(hw); - if (phy->sfp_type != ixgbe_sfp_type_unknown) - phy->ops.reset = NULL; + /* Vendor alarm triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); - /* Set functions pointers based on phy type */ - switch (hw->phy.type) { - case ixgbe_phy_x550em_kx4: - phy->ops.setup_link = ixgbe_setup_kx4_x550em; - phy->ops.read_reg = ixgbe_read_phy_reg_x550em; - phy->ops.write_reg = ixgbe_write_phy_reg_x550em; - break; - case ixgbe_phy_x550em_kr: - phy->ops.setup_link = ixgbe_setup_kr_x550em; - phy->ops.read_reg = ixgbe_read_phy_reg_x550em; - phy->ops.write_reg = ixgbe_write_phy_reg_x550em; - break; - case ixgbe_phy_x550em_ext_t: - phy->ops.setup_internal_link = ixgbe_setup_internal_phy_x550em; - break; - default: - break; - } - return ret_val; -} + if (status != IXGBE_SUCCESS || + !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN)) + return status; -/** - * ixgbe_reset_hw_X550em - Perform hardware reset - * @hw: pointer to hardware structure - * - * Resets the hardware by resetting the transmit and receive units, masks - * and clears all interrupts, perform a PHY reset, and perform a link (MAC) - * reset. - */ -s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) -{ - struct ixgbe_hic_hdr fw_cmd; - ixgbe_link_speed link_speed; - s32 status; - u32 ctrl = 0; - u32 i; - bool link_up = false; + /* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); - DEBUGFUNC("ixgbe_reset_hw_X550em"); + if (status != IXGBE_SUCCESS || + !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN | + IXGBE_MDIO_GLOBAL_ALARM_1_INT))) + return status; - fw_cmd.cmd = FW_PHY_MGMT_REQ_CMD; - fw_cmd.buf_len = 0; - fw_cmd.cmd_or_resp.cmd_resv = 0; - fw_cmd.checksum = FW_DEFAULT_CHECKSUM; - status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, - sizeof(fw_cmd), - IXGBE_HI_PHY_MGMT_REQ_TIMEOUT, - true); - if (status) - ERROR_REPORT2(IXGBE_ERROR_CAUTION, - "PHY mgmt command failed with %d\n", status); - else if (fw_cmd.cmd_or_resp.ret_status != FW_CEM_RESP_STATUS_SUCCESS) - ERROR_REPORT2(IXGBE_ERROR_CAUTION, - "PHY mgmt command returned %d\n", - fw_cmd.cmd_or_resp.ret_status); + /* Global alarm triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); - /* Call adapter stop to disable Tx/Rx and clear interrupts */ - status = hw->mac.ops.stop_adapter(hw); if (status != IXGBE_SUCCESS) return status; - /* flush pending Tx transactions */ - ixgbe_clear_tx_pending(hw); + /* If high temperature failure, then return over temp error and exit */ + if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) { + /* power down the PHY in case the PHY FW didn't already */ + ixgbe_set_copper_phy_power(hw, false); + return IXGBE_ERR_OVERTEMP; + } else if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) { + /* device fault alarm triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); - /* PHY ops must be identified and initialized prior to reset */ + if (status != IXGBE_SUCCESS) + return status; - /* Identify PHY and related function pointers */ - status = hw->phy.ops.init(hw); + /* if device fault was due to high temp alarm handle and exit */ + if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) { + /* power down the PHY in case the PHY FW didn't */ + ixgbe_set_copper_phy_power(hw, false); + return IXGBE_ERR_OVERTEMP; + } + } - if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + /* Vendor alarm 2 triggered */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); + + if (status != IXGBE_SUCCESS || + !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT)) return status; - /* start the external PHY */ - if (hw->phy.type == ixgbe_phy_x550em_ext_t) { - status = ixgbe_init_ext_t_x550em(hw); - if (status) - return status; - } + /* link connect/disconnect event occurred */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); - /* Setup SFP module if there is one present. */ - if (hw->phy.sfp_setup_needed) { - status = hw->mac.ops.setup_sfp(hw); - hw->phy.sfp_setup_needed = false; - } - - if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + if (status != IXGBE_SUCCESS) return status; - /* Reset PHY */ - if (!hw->phy.reset_disable && hw->phy.ops.reset) - hw->phy.ops.reset(hw); - -mac_reset_top: - /* Issue global reset to the MAC. Needs to be SW reset if link is up. - * If link reset is used when link is up, it might reset the PHY when - * mng is using it. If link is down or the flag to force full link - * reset is set, then perform link reset. - */ - ctrl = IXGBE_CTRL_LNK_RST; - if (!hw->force_full_reset) { - hw->mac.ops.check_link(hw, &link_speed, &link_up, false); - if (link_up) - ctrl = IXGBE_CTRL_RST; - } - - ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); - IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); - IXGBE_WRITE_FLUSH(hw); - - /* Poll for reset bit to self-clear meaning reset is complete */ - for (i = 0; i < 10; i++) { - usec_delay(1); - ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); - if (!(ctrl & IXGBE_CTRL_RST_MASK)) - break; - } - - if (ctrl & IXGBE_CTRL_RST_MASK) { - status = IXGBE_ERR_RESET_FAILED; - DEBUGOUT("Reset polling failed to complete.\n"); - } - - msec_delay(50); - - /* Double resets are required for recovery from certain error - * conditions. Between resets, it is necessary to stall to - * allow time for any pending HW events to complete. - */ - if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { - hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; - goto mac_reset_top; - } - - /* Store the permanent mac address */ - hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); - - /* Store MAC address from RAR0, clear receive address registers, and - * clear the multicast table. Also reset num_rar_entries to 128, - * since we modify this value when programming the SAN MAC address. - */ - hw->mac.num_rar_entries = 128; - hw->mac.ops.init_rx_addrs(hw); - - - if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) - ixgbe_setup_mux_ctl(hw); + /* Indicate LSC */ + if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC) + *lsc = true; - return status; + return IXGBE_SUCCESS; } /** - * ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY. + * ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts * @hw: pointer to hardware structure + * + * Enable link status change and temperature failure alarm for the external + * Base T PHY + * + * Returns PHY access status */ -s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) +STATIC s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) { u32 status; u16 reg; - u32 retries = 1; + bool lsc; - /* TODO: The number of attempts and delay between attempts is undefined */ - do { - /* decrement retries counter and exit if we hit 0 */ - if (retries < 1) { - ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE, - "External PHY not yet finished resetting."); - return IXGBE_ERR_PHY; - } - retries--; + /* Clear interrupt flags */ + status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); - usec_delay(0); + /* Enable link status change alarm */ + /* Enable the LASI interrupts on X552 devices to receive notifications + * of the link configurations of the external PHY and correspondingly + * support the configuration of the internal iXFI link, since iXFI does + * not support auto-negotiation. This is not required for X553 devices + * having KR support, which performs auto-negotiations and which is used + * as the internal link to the external PHY. Hence adding a check here + * to avoid enabling LASI interrupts for X553 devices. + */ + if (hw->mac.type != ixgbe_mac_X550EM_a) { status = hw->phy.ops.read_reg(hw, - IXGBE_MDIO_TX_VENDOR_ALARMS_3, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - ®); + IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); if (status != IXGBE_SUCCESS) return status; - /* Verify PHY FW reset has completed */ - } while ((reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) != 1); + reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN; - /* Set port to low power mode */ - status = hw->phy.ops.read_reg(hw, - IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, + status = hw->phy.ops.write_reg(hw, + IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg); + + if (status != IXGBE_SUCCESS) + return status; + } + + /* Enable high temperature failure and global fault alarms */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, ®); if (status != IXGBE_SUCCESS) return status; - reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE; + reg |= (IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN | + IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN); - status = hw->phy.ops.write_reg(hw, - IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL, + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, reg); if (status != IXGBE_SUCCESS) return status; - /* Enable the transmitter */ - status = hw->phy.ops.read_reg(hw, - IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, + /* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, ®); if (status != IXGBE_SUCCESS) return status; - reg &= ~IXGBE_MDIO_PMD_GLOBAL_TX_DISABLE; + reg |= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN | + IXGBE_MDIO_GLOBAL_ALARM_1_INT); - status = hw->phy.ops.write_reg(hw, - IXGBE_MDIO_PMD_STD_TX_DISABLE_CNTR, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, reg); if (status != IXGBE_SUCCESS) return status; - /* Un-stall the PHY FW */ - status = hw->phy.ops.read_reg(hw, - IXGBE_MDIO_GLOBAL_RES_PR_10, + /* Enable chip-wide vendor alarm */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK, IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, ®); if (status != IXGBE_SUCCESS) return status; - reg &= ~IXGBE_MDIO_POWER_UP_STALL; + reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN; - status = hw->phy.ops.write_reg(hw, - IXGBE_MDIO_GLOBAL_RES_PR_10, + status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK, IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, reg); @@ -1366,952 +2117,2534 @@ s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) } /** - * ixgbe_setup_kr_x550em - Configure the KR PHY. + * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed. * @hw: pointer to hardware structure + * @speed: link speed * * Configures the integrated KR PHY. **/ -s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw) +STATIC s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw, + ixgbe_link_speed speed) { s32 status; u32 reg_val; - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); if (status) return status; reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ; - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC; reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR | IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX); /* Advertise 10G support. */ - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + if (speed & IXGBE_LINK_SPEED_10GB_FULL) reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR; /* Advertise 1G support. */ - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + if (speed & IXGBE_LINK_SPEED_1GB_FULL) reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX; - /* Restart auto-negotiation. */ - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - return status; + if (hw->mac.type == ixgbe_mac_X550EM_a) { + /* Set lane mode to KR auto negotiation */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + + if (status) + return status; + + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; + reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN; + reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; + + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + } + + return ixgbe_restart_an_internal_phy_x550em(hw); } /** - * ixgbe_setup_kx4_x550em - Configure the KX4 PHY. - * @hw: pointer to hardware structure - * - * Configures the integrated KX4 PHY. - **/ -s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw) + * ixgbe_reset_phy_fw - Reset firmware-controlled PHYs + * @hw: pointer to hardware structure + */ +static s32 ixgbe_reset_phy_fw(struct ixgbe_hw *hw) { - s32 status; - u32 reg_val; + u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 }; + s32 rc; - status = ixgbe_read_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1, - IXGBE_SB_IOSF_TARGET_KX4_PCS0 + hw->bus.lan_id, ®_val); - if (status) - return status; + if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw)) + return IXGBE_SUCCESS; - reg_val &= ~(IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4 | - IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX); + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_PHY_SW_RESET, &store); + if (rc) + return rc; + memset(store, 0, sizeof(store)); - reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_ENABLE; + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_INIT_PHY, &store); + if (rc) + return rc; - /* Advertise 10G support. */ - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) - reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX4; + return ixgbe_setup_fw_link(hw); +} - /* Advertise 1G support. */ - if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) - reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_CAP_KX; +/** + * ixgbe_check_overtemp_fw - Check firmware-controlled PHYs for overtemp + * @hw: pointer to hardware structure + */ +static s32 ixgbe_check_overtemp_fw(struct ixgbe_hw *hw) +{ + u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 }; + s32 rc; - /* Restart auto-negotiation. */ - reg_val |= IXGBE_KX4_LINK_CNTL_1_TETH_AN_RESTART; - status = ixgbe_write_iosf_sb_reg_x550(hw, IXGBE_KX4_LINK_CNTL_1, - IXGBE_SB_IOSF_TARGET_KX4_PCS0 + hw->bus.lan_id, reg_val); + rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &store); + if (rc) + return rc; - return status; + if (store[0] & FW_PHY_ACT_GET_LINK_INFO_TEMP) { + ixgbe_shutdown_fw_phy(hw); + return IXGBE_ERR_OVERTEMP; + } + return IXGBE_SUCCESS; } /** - * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. + * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register * @hw: pointer to hardware structure - * @speed: the link speed to force * - * Configures the integrated KR PHY to use iXFI mode. Used to connect an - * internal and external PHY at a specific speed, without autonegotiation. + * Read NW_MNG_IF_SEL register and save field values, and check for valid field + * values. **/ -STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) +STATIC s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw) { - s32 status; - u32 reg_val; - - /* Disable AN and force speed to 10G Serial. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); - if (status != IXGBE_SUCCESS) - return status; - - reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; - reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + /* Save NW management interface connected on board. This is used + * to determine internal PHY mode. + */ + hw->phy.nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); - /* Select forced link speed for internal PHY. */ - switch (*speed) { - case IXGBE_LINK_SPEED_10GB_FULL: - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; - break; - case IXGBE_LINK_SPEED_1GB_FULL: - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; - break; - default: - /* Other link speeds are not supported by internal KR PHY. */ - return IXGBE_ERR_LINK_SETUP; + /* If X552 (X550EM_a) and MDIO is connected to external PHY, then set + * PHY address. This register field was has only been used for X552. + */ + if (hw->mac.type == ixgbe_mac_X550EM_a && + hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_MDIO_ACT) { + hw->phy.addr = (hw->phy.nw_mng_if_sel & + IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD) >> + IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT; } - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - if (status != IXGBE_SUCCESS) - return status; - - /* Disable training protocol FSM. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); - if (status != IXGBE_SUCCESS) - return status; - reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - if (status != IXGBE_SUCCESS) - return status; - - /* Disable Flex from training TXFFE. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); - if (status != IXGBE_SUCCESS) - return status; - reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; - reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; - reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - if (status != IXGBE_SUCCESS) - return status; - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); - if (status != IXGBE_SUCCESS) - return status; - reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; - reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; - reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - if (status != IXGBE_SUCCESS) - return status; - - /* Enable override for coefficients. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); - if (status != IXGBE_SUCCESS) - return status; - reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN; - reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN; - reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN; - reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - if (status != IXGBE_SUCCESS) - return status; - - /* Toggle port SW reset by AN reset. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); - if (status != IXGBE_SUCCESS) - return status; - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - - return status; + return IXGBE_SUCCESS; } /** - * ixgbe_setup_internal_phy_x550em - Configure integrated KR PHY - * @hw: point to hardware structure - * - * Configures the integrated KR PHY to talk to the external PHY. The base - * driver will call this function when it gets notification via interrupt from - * the external PHY. This function forces the internal PHY into iXFI mode at - * the correct speed. + * ixgbe_init_phy_ops_X550em - PHY/SFP specific init + * @hw: pointer to hardware structure * - * A return of a non-zero value indicates an error, and the base driver should - * not report link up. + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. */ -s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw) +s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) { - u32 status; - u16 lasi, autoneg_status, speed; - ixgbe_link_speed force_speed; - - /* Verify that the external link status has changed */ - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_XENPAK_LASI_STATUS, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - &lasi); - if (status != IXGBE_SUCCESS) - return status; - - /* If there was no change in link status, we can just exit */ - if (!(lasi & IXGBE_XENPAK_LASI_LINK_STATUS_ALARM)) - return IXGBE_SUCCESS; - - /* we read this twice back to back to indicate current status */ - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_status); - if (status != IXGBE_SUCCESS) - return status; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val; - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &autoneg_status); - if (status != IXGBE_SUCCESS) - return status; + DEBUGFUNC("ixgbe_init_phy_ops_X550em"); - /* If link is not up return an error indicating treat link as down */ - if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS)) - return IXGBE_ERR_INVALID_LINK_SETTINGS; + hw->mac.ops.set_lan_id(hw); + ixgbe_read_mng_if_sel_x550em(hw); - status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, - IXGBE_MDIO_AUTO_NEG_DEV_TYPE, - &speed); + if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) { + phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; + ixgbe_setup_mux_ctl(hw); + phy->ops.identify_sfp = ixgbe_identify_sfp_module_X550em; + } - /* clear everything but the speed and duplex bits */ - speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK; + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: + phy->ops.read_reg_mdi = NULL; + phy->ops.write_reg_mdi = NULL; + hw->phy.ops.read_reg = NULL; + hw->phy.ops.write_reg = NULL; + phy->ops.check_overtemp = ixgbe_check_overtemp_fw; + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM; - switch (speed) { - case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL: - force_speed = IXGBE_LINK_SPEED_10GB_FULL; break; - case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL: - force_speed = IXGBE_LINK_SPEED_1GB_FULL; + case IXGBE_DEV_ID_X550EM_A_10G_T: + case IXGBE_DEV_ID_X550EM_A_SFP: + hw->phy.ops.read_reg = ixgbe_read_phy_reg_x550a; + hw->phy.ops.write_reg = ixgbe_write_phy_reg_x550a; + if (hw->bus.lan_id) + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; + else + hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM; + break; + case IXGBE_DEV_ID_X550EM_X_SFP: + /* set up for CS4227 usage */ + hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; break; + case IXGBE_DEV_ID_X550EM_X_1G_T: + phy->ops.read_reg_mdi = NULL; + phy->ops.write_reg_mdi = NULL; default: - /* Internal PHY does not support anything else */ - return IXGBE_ERR_INVALID_LINK_SETTINGS; + break; + } + + /* Identify the PHY or SFP module */ + ret_val = phy->ops.identify(hw); + if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED || + ret_val == IXGBE_ERR_PHY_ADDR_INVALID) + return ret_val; + + /* Setup function pointers based on detected hardware */ + ixgbe_init_mac_link_ops_X550em(hw); + if (phy->sfp_type != ixgbe_sfp_type_unknown) + phy->ops.reset = NULL; + + /* Set functions pointers based on phy type */ + switch (hw->phy.type) { + case ixgbe_phy_x550em_kx4: + phy->ops.setup_link = NULL; + phy->ops.read_reg = ixgbe_read_phy_reg_x550em; + phy->ops.write_reg = ixgbe_write_phy_reg_x550em; + break; + case ixgbe_phy_x550em_kr: + phy->ops.setup_link = ixgbe_setup_kr_x550em; + phy->ops.read_reg = ixgbe_read_phy_reg_x550em; + phy->ops.write_reg = ixgbe_write_phy_reg_x550em; + break; + case ixgbe_phy_ext_1g_t: + /* link is managed by FW */ + phy->ops.setup_link = NULL; + phy->ops.reset = NULL; + break; + case ixgbe_phy_x550em_xfi: + /* link is managed by HW */ + phy->ops.setup_link = NULL; + phy->ops.read_reg = ixgbe_read_phy_reg_x550em; + phy->ops.write_reg = ixgbe_write_phy_reg_x550em; + break; + case ixgbe_phy_x550em_ext_t: + /* If internal link mode is XFI, then setup iXFI internal link, + * else setup KR now. + */ + phy->ops.setup_internal_link = + ixgbe_setup_internal_phy_t_x550em; + + /* setup SW LPLU only for first revision of X550EM_x */ + if ((hw->mac.type == ixgbe_mac_X550EM_x) && + !(IXGBE_FUSES0_REV_MASK & + IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))) + phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em; + + phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em; + phy->ops.reset = ixgbe_reset_phy_t_X550em; + break; + case ixgbe_phy_sgmii: + phy->ops.setup_link = NULL; + break; + case ixgbe_phy_fw: + phy->ops.setup_link = ixgbe_setup_fw_link; + phy->ops.reset = ixgbe_reset_phy_fw; + break; + default: + break; + } + return ret_val; +} + +/** + * ixgbe_set_mdio_speed - Set MDIO clock speed + * @hw: pointer to hardware structure + */ +STATIC void ixgbe_set_mdio_speed(struct ixgbe_hw *hw) +{ + u32 hlreg0; + + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_10G_T: + case IXGBE_DEV_ID_X550EM_A_SGMII: + case IXGBE_DEV_ID_X550EM_A_SGMII_L: + case IXGBE_DEV_ID_X550EM_A_10G_T: + case IXGBE_DEV_ID_X550EM_A_SFP: + case IXGBE_DEV_ID_X550EM_A_QSFP: + /* Config MDIO clock speed before the first MDIO PHY access */ + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); + hlreg0 &= ~IXGBE_HLREG0_MDCSPD; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); + break; + case IXGBE_DEV_ID_X550EM_A_1G_T: + case IXGBE_DEV_ID_X550EM_A_1G_T_L: + /* Select fast MDIO clock speed for these devices */ + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); + hlreg0 |= IXGBE_HLREG0_MDCSPD; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); + break; + default: + break; + } +} + +/** + * ixgbe_reset_hw_X550em - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + */ +s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) +{ + ixgbe_link_speed link_speed; + s32 status; + u32 ctrl = 0; + u32 i; + bool link_up = false; + u32 swfw_mask = hw->phy.phy_semaphore_mask; + + DEBUGFUNC("ixgbe_reset_hw_X550em"); + + /* Call adapter stop to disable Tx/Rx and clear interrupts */ + status = hw->mac.ops.stop_adapter(hw); + if (status != IXGBE_SUCCESS) { + DEBUGOUT1("Failed to stop adapter, STATUS = %d\n", status); + return status; + } + /* flush pending Tx transactions */ + ixgbe_clear_tx_pending(hw); + + ixgbe_set_mdio_speed(hw); + + /* PHY ops must be identified and initialized prior to reset */ + status = hw->phy.ops.init(hw); + + if (status) + DEBUGOUT1("Failed to initialize PHY ops, STATUS = %d\n", + status); + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED || + status == IXGBE_ERR_PHY_ADDR_INVALID) { + DEBUGOUT("Returning from reset HW due to PHY init failure\n"); + return status; + } + + /* start the external PHY */ + if (hw->phy.type == ixgbe_phy_x550em_ext_t) { + status = ixgbe_init_ext_t_x550em(hw); + if (status) { + DEBUGOUT1("Failed to start the external PHY, STATUS = %d\n", + status); + return status; + } + } + + /* Setup SFP module if there is one present. */ + if (hw->phy.sfp_setup_needed) { + status = hw->mac.ops.setup_sfp(hw); + hw->phy.sfp_setup_needed = false; + } + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + return status; + + /* Reset PHY */ + if (!hw->phy.reset_disable && hw->phy.ops.reset) { + if (hw->phy.ops.reset(hw) == IXGBE_ERR_OVERTEMP) + return IXGBE_ERR_OVERTEMP; + } + +mac_reset_top: + /* Issue global reset to the MAC. Needs to be SW reset if link is up. + * If link reset is used when link is up, it might reset the PHY when + * mng is using it. If link is down or the flag to force full link + * reset is set, then perform link reset. + */ + ctrl = IXGBE_CTRL_LNK_RST; + if (!hw->force_full_reset) { + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up) + ctrl = IXGBE_CTRL_RST; + } + + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status != IXGBE_SUCCESS) { + ERROR_REPORT2(IXGBE_ERROR_CAUTION, + "semaphore failed with %d", status); + return IXGBE_ERR_SWFW_SYNC; + } + ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + + /* Poll for reset bit to self-clear meaning reset is complete */ + for (i = 0; i < 10; i++) { + usec_delay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST_MASK)) + break; + } + + if (ctrl & IXGBE_CTRL_RST_MASK) { + status = IXGBE_ERR_RESET_FAILED; + DEBUGOUT("Reset polling failed to complete.\n"); + } + + msec_delay(50); + + /* Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to + * allow time for any pending HW events to complete. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = 128; + hw->mac.ops.init_rx_addrs(hw); + + ixgbe_set_mdio_speed(hw); + + if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) + ixgbe_setup_mux_ctl(hw); + + if (status != IXGBE_SUCCESS) + DEBUGOUT1("Reset HW failed, STATUS = %d\n", status); + + return status; +} + +/** + * ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY. + * @hw: pointer to hardware structure + */ +s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) +{ + u32 status; + u16 reg; + + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_TX_VENDOR_ALARMS_3, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + ®); + + if (status != IXGBE_SUCCESS) + return status; + + /* If PHY FW reset completed bit is set then this is the first + * SW instance after a power on so the PHY FW must be un-stalled. + */ + if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) { + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_GLOBAL_RES_PR_10, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + ®); + + if (status != IXGBE_SUCCESS) + return status; + + reg &= ~IXGBE_MDIO_POWER_UP_STALL; + + status = hw->phy.ops.write_reg(hw, + IXGBE_MDIO_GLOBAL_RES_PR_10, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, + reg); + + if (status != IXGBE_SUCCESS) + return status; + } + + return status; +} + +/** + * ixgbe_setup_kr_x550em - Configure the KR PHY. + * @hw: pointer to hardware structure + **/ +s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw) +{ + /* leave link alone for 2.5G */ + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL) + return IXGBE_SUCCESS; + + if (ixgbe_check_reset_blocked(hw)) + return 0; + + return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised); +} + +/** + * ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: unused + * + * Configure the external PHY and the integrated KR PHY for SFP support. + **/ +s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) +{ + s32 ret_val; + u16 reg_slice, reg_val; + bool setup_linear = false; + UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); + + /* Check if SFP module is supported and linear */ + ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); + + /* If no SFP module present, then return success. Return success since + * there is no reason to configure CS4227 and SFP not present error is + * not excepted in the setup MAC link flow. + */ + if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT) + return IXGBE_SUCCESS; + + if (ret_val != IXGBE_SUCCESS) + return ret_val; + + /* Configure internal PHY for KR/KX. */ + ixgbe_setup_kr_speed_x550em(hw, speed); + + /* Configure CS4227 LINE side to proper mode. */ + reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + + (hw->bus.lan_id << 12); + if (setup_linear) + reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; + else + reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; + ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, + reg_val); + return ret_val; +} + +/** + * ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode + * @hw: pointer to hardware structure + * @speed: the link speed to force + * + * Configures the integrated PHY for native SFI mode. Used to connect the + * internal PHY directly to an SFP cage, without autonegotiation. + **/ +STATIC s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed) +{ + struct ixgbe_mac_info *mac = &hw->mac; + s32 status; + u32 reg_val; + + /* Disable all AN and force speed to 10G Serial. */ + status = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status != IXGBE_SUCCESS) + return status; + + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; + reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; + + /* Select forced link speed for internal PHY. */ + switch (*speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G; + break; + default: + /* Other link speeds are not supported by internal PHY. */ + return IXGBE_ERR_LINK_SETUP; + } + + status = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + /* Toggle port SW reset by AN reset. */ + status = ixgbe_restart_an_internal_phy_x550em(hw); + + return status; +} + +/** + * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: unused + * + * Configure the integrated PHY for SFP support. + **/ +s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) +{ + s32 ret_val; + u16 reg_phy_ext; + bool setup_linear = false; + u32 reg_slice, reg_phy_int, slice_offset; + + UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); + + /* Check if SFP module is supported and linear */ + ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); + + /* If no SFP module present, then return success. Return success since + * SFP not present error is not excepted in the setup MAC link flow. + */ + if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT) + return IXGBE_SUCCESS; + + if (ret_val != IXGBE_SUCCESS) + return ret_val; + + if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP_N) { + /* Configure internal PHY for native SFI based on module type */ + ret_val = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_phy_int); + + if (ret_val != IXGBE_SUCCESS) + return ret_val; + + reg_phy_int &= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA; + if (!setup_linear) + reg_phy_int |= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_SR; + + ret_val = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_phy_int); + + if (ret_val != IXGBE_SUCCESS) + return ret_val; + + /* Setup SFI internal link. */ + ret_val = ixgbe_setup_sfi_x550a(hw, &speed); + } else { + /* Configure internal PHY for KR/KX. */ + ixgbe_setup_kr_speed_x550em(hw, speed); + + if (hw->phy.addr == 0x0 || hw->phy.addr == 0xFFFF) { + /* Find Address */ + DEBUGOUT("Invalid NW_MNG_IF_SEL.MDIO_PHY_ADD value\n"); + return IXGBE_ERR_PHY_ADDR_INVALID; + } + + /* Get external PHY SKU id */ + ret_val = hw->phy.ops.read_reg(hw, IXGBE_CS4227_EFUSE_PDF_SKU, + IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); + + if (ret_val != IXGBE_SUCCESS) + return ret_val; + + /* When configuring quad port CS4223, the MAC instance is part + * of the slice offset. + */ + if (reg_phy_ext == IXGBE_CS4223_SKU_ID) + slice_offset = (hw->bus.lan_id + + (hw->bus.instance_id << 1)) << 12; + else + slice_offset = hw->bus.lan_id << 12; + + /* Configure CS4227/CS4223 LINE side to proper mode. */ + reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + slice_offset; + + ret_val = hw->phy.ops.read_reg(hw, reg_slice, + IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); + + if (ret_val != IXGBE_SUCCESS) + return ret_val; + + reg_phy_ext &= ~((IXGBE_CS4227_EDC_MODE_CX1 << 1) | + (IXGBE_CS4227_EDC_MODE_SR << 1)); + + if (setup_linear) + reg_phy_ext |= (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; + else + reg_phy_ext |= (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; + ret_val = hw->phy.ops.write_reg(hw, reg_slice, + IXGBE_MDIO_ZERO_DEV_TYPE, reg_phy_ext); + + /* Flush previous write with a read */ + ret_val = hw->phy.ops.read_reg(hw, reg_slice, + IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); + } + return ret_val; +} + +/** + * ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration + * @hw: pointer to hardware structure + * + * iXfI configuration needed for ixgbe_mac_X550EM_x devices. + **/ +STATIC s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + s32 status; + u32 reg_val; + + /* Disable training protocol FSM. */ + status = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status != IXGBE_SUCCESS) + return status; + reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL; + status = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status != IXGBE_SUCCESS) + return status; + + /* Disable Flex from training TXFFE. */ + status = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status != IXGBE_SUCCESS) + return status; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; + status = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status != IXGBE_SUCCESS) + return status; + status = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status != IXGBE_SUCCESS) + return status; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; + reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; + status = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status != IXGBE_SUCCESS) + return status; + + /* Enable override for coefficients. */ + status = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status != IXGBE_SUCCESS) + return status; + reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN; + reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN; + reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN; + reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN; + status = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + return status; +} + +/** + * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. + * @hw: pointer to hardware structure + * @speed: the link speed to force + * + * Configures the integrated KR PHY to use iXFI mode. Used to connect an + * internal and external PHY at a specific speed, without autonegotiation. + **/ +STATIC s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) +{ + struct ixgbe_mac_info *mac = &hw->mac; + s32 status; + u32 reg_val; + + /* iXFI is only supported with X552 */ + if (mac->type != ixgbe_mac_X550EM_x) + return IXGBE_ERR_LINK_SETUP; + + /* Disable AN and force speed to 10G Serial. */ + status = mac->ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status != IXGBE_SUCCESS) + return status; + + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + + /* Select forced link speed for internal PHY. */ + switch (*speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; + break; + default: + /* Other link speeds are not supported by internal KR PHY. */ + return IXGBE_ERR_LINK_SETUP; + } + + status = mac->ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status != IXGBE_SUCCESS) + return status; + + /* Additional configuration needed for x550em_x */ + if (hw->mac.type == ixgbe_mac_X550EM_x) { + status = ixgbe_setup_ixfi_x550em_x(hw); + if (status != IXGBE_SUCCESS) + return status; + } + + /* Toggle port SW reset by AN reset. */ + status = ixgbe_restart_an_internal_phy_x550em(hw); + + return status; +} + +/** + * ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status + * @hw: address of hardware structure + * @link_up: address of boolean to indicate link status + * + * Returns error code if unable to get link status. + */ +STATIC s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up) +{ + u32 ret; + u16 autoneg_status; + + *link_up = false; + + /* read this twice back to back to indicate current status */ + ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_status); + if (ret != IXGBE_SUCCESS) + return ret; + + ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_status); + if (ret != IXGBE_SUCCESS) + return ret; + + *link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link + * @hw: point to hardware structure + * + * Configures the link between the integrated KR PHY and the external X557 PHY + * The driver will call this function when it gets a link status change + * interrupt from the X557 PHY. This function configures the link speed + * between the PHYs to match the link speed of the BASE-T link. + * + * A return of a non-zero value indicates an error, and the base driver should + * not report link up. + */ +s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw) +{ + ixgbe_link_speed force_speed; + bool link_up; + u32 status; + u16 speed; + + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) + return IXGBE_ERR_CONFIG; + + if (hw->mac.type == ixgbe_mac_X550EM_x && + !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { + /* If link is down, there is no setup necessary so return */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status != IXGBE_SUCCESS) + return status; + + if (!link_up) + return IXGBE_SUCCESS; + + status = hw->phy.ops.read_reg(hw, + IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &speed); + if (status != IXGBE_SUCCESS) + return status; + + /* If link is still down - no setup is required so return */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); + if (status != IXGBE_SUCCESS) + return status; + if (!link_up) + return IXGBE_SUCCESS; + + /* clear everything but the speed and duplex bits */ + speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK; + + switch (speed) { + case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL: + force_speed = IXGBE_LINK_SPEED_10GB_FULL; + break; + case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL: + force_speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + default: + /* Internal PHY does not support anything else */ + return IXGBE_ERR_INVALID_LINK_SETTINGS; + } + + return ixgbe_setup_ixfi_x550em(hw, &force_speed); + } else { + speed = IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + return ixgbe_setup_kr_speed_x550em(hw, speed); + } +} + +/** + * ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback. + * @hw: pointer to hardware structure + * + * Configures the integrated KR PHY to use internal loopback mode. + **/ +s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw) +{ + s32 status; + u32 reg_val; + + /* Disable AN and force speed to 10G Serial. */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status != IXGBE_SUCCESS) + return status; + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; + reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; + reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status != IXGBE_SUCCESS) + return status; + + /* Set near-end loopback clocks. */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status != IXGBE_SUCCESS) + return status; + reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B; + reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS; + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status != IXGBE_SUCCESS) + return status; + + /* Set loopback enable. */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status != IXGBE_SUCCESS) + return status; + reg_val |= IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK; + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + if (status != IXGBE_SUCCESS) + return status; + + /* Training bypass. */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (status != IXGBE_SUCCESS) + return status; + reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS; + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + return status; +} + +/** + * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command + * assuming that the semaphore is already obtained. + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the hostif. + **/ +s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM; + struct ixgbe_hic_read_shadow_ram buffer; + s32 status; + + DEBUGFUNC("ixgbe_read_ee_hostif_X550"); + buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; + buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + + /* convert offset from words to bytes */ + buffer.address = IXGBE_CPU_TO_BE32(offset * 2); + /* one word */ + buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16)); + buffer.pad2 = 0; + buffer.pad3 = 0; + + status = hw->mac.ops.acquire_swfw_sync(hw, mask); + if (status) + return status; + + status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT); + if (!status) { + *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, + FW_NVM_DATA_OFFSET); + } + + hw->mac.ops.release_swfw_sync(hw, mask); + return status; +} + +/** + * ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM + * + * Reads a 16 bit word(s) from the EEPROM using the hostif. + **/ +s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM; + struct ixgbe_hic_read_shadow_ram buffer; + u32 current_word = 0; + u16 words_to_read; + s32 status; + u32 i; + + DEBUGFUNC("ixgbe_read_ee_hostif_buffer_X550"); + + /* Take semaphore for the entire operation. */ + status = hw->mac.ops.acquire_swfw_sync(hw, mask); + if (status) { + DEBUGOUT("EEPROM read buffer - semaphore failed\n"); + return status; + } + + while (words) { + if (words > FW_MAX_READ_BUFFER_SIZE / 2) + words_to_read = FW_MAX_READ_BUFFER_SIZE / 2; + else + words_to_read = words; + + buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; + buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + + /* convert offset from words to bytes */ + buffer.address = IXGBE_CPU_TO_BE32((offset + current_word) * 2); + buffer.length = IXGBE_CPU_TO_BE16(words_to_read * 2); + buffer.pad2 = 0; + buffer.pad3 = 0; + + status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT); + + if (status) { + DEBUGOUT("Host interface command failed\n"); + goto out; + } + + for (i = 0; i < words_to_read; i++) { + u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) + + 2 * i; + u32 value = IXGBE_READ_REG(hw, reg); + + data[current_word] = (u16)(value & 0xffff); + current_word++; + i++; + if (i < words_to_read) { + value >>= 16; + data[current_word] = (u16)(value & 0xffff); + current_word++; + } + } + words -= words_to_read; + } + +out: + hw->mac.ops.release_swfw_sync(hw, mask); + return status; +} + +/** + * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the hostif. + **/ +s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, + u16 data) +{ + s32 status; + struct ixgbe_hic_write_shadow_ram buffer; + + DEBUGFUNC("ixgbe_write_ee_hostif_data_X550"); + + buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD; + buffer.hdr.req.buf_lenh = 0; + buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN; + buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + + /* one word */ + buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16)); + buffer.data = data; + buffer.address = IXGBE_CPU_TO_BE32(offset * 2); + + status = ixgbe_host_interface_command(hw, (u32 *)&buffer, + sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT, false); + + return status; +} + +/** + * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the hostif. + **/ +s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, + u16 data) +{ + s32 status = IXGBE_SUCCESS; + + DEBUGFUNC("ixgbe_write_ee_hostif_X550"); + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + IXGBE_SUCCESS) { + status = ixgbe_write_ee_hostif_data_X550(hw, offset, data); + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + } else { + DEBUGOUT("write ee hostif failed to get semaphore"); + status = IXGBE_ERR_SWFW_SYNC; + } + + return status; +} + +/** + * ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of words + * @data: word(s) write to the EEPROM + * + * Write a 16 bit word(s) to the EEPROM using the hostif. + **/ +s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + s32 status = IXGBE_SUCCESS; + u32 i = 0; + + DEBUGFUNC("ixgbe_write_ee_hostif_buffer_X550"); + + /* Take semaphore for the entire operation. */ + status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + if (status != IXGBE_SUCCESS) { + DEBUGOUT("EEPROM write buffer - semaphore failed\n"); + goto out; + } + + for (i = 0; i < words; i++) { + status = ixgbe_write_ee_hostif_data_X550(hw, offset + i, + data[i]); + + if (status != IXGBE_SUCCESS) { + DEBUGOUT("Eeprom buffered write failed\n"); + break; + } + } + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); +out: + + return status; +} + +/** + * ixgbe_checksum_ptr_x550 - Checksum one pointer region + * @hw: pointer to hardware structure + * @ptr: pointer offset in eeprom + * @size: size of section pointed by ptr, if 0 first word will be used as size + * @csum: address of checksum to update + * @buffer: pointer to buffer containing calculated checksum + * @buffer_size: size of buffer + * + * Returns error status for any failure + */ +STATIC s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr, + u16 size, u16 *csum, u16 *buffer, + u32 buffer_size) +{ + u16 buf[256]; + s32 status; + u16 length, bufsz, i, start; + u16 *local_buffer; + + bufsz = sizeof(buf) / sizeof(buf[0]); + + /* Read a chunk at the pointer location */ + if (!buffer) { + status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf); + if (status) { + DEBUGOUT("Failed to read EEPROM image\n"); + return status; + } + local_buffer = buf; + } else { + if (buffer_size < ptr) + return IXGBE_ERR_PARAM; + local_buffer = &buffer[ptr]; + } + + if (size) { + start = 0; + length = size; + } else { + start = 1; + length = local_buffer[0]; + + /* Skip pointer section if length is invalid. */ + if (length == 0xFFFF || length == 0 || + (ptr + length) >= hw->eeprom.word_size) + return IXGBE_SUCCESS; + } + + if (buffer && ((u32)start + (u32)length > buffer_size)) + return IXGBE_ERR_PARAM; + + for (i = start; length; i++, length--) { + if (i == bufsz && !buffer) { + ptr += bufsz; + i = 0; + if (length < bufsz) + bufsz = length; + + /* Read a chunk at the pointer location */ + status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, + bufsz, buf); + if (status) { + DEBUGOUT("Failed to read EEPROM image\n"); + return status; + } + } + *csum += local_buffer[i]; + } + return IXGBE_SUCCESS; +} + +/** + * ixgbe_calc_checksum_X550 - Calculates and returns the checksum + * @hw: pointer to hardware structure + * @buffer: pointer to buffer containing calculated checksum + * @buffer_size: size of buffer + * + * Returns a negative error code on error, or the 16-bit checksum + **/ +s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size) +{ + u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1]; + u16 *local_buffer; + s32 status; + u16 checksum = 0; + u16 pointer, i, size; + + DEBUGFUNC("ixgbe_calc_eeprom_checksum_X550"); + + hw->eeprom.ops.init_params(hw); + + if (!buffer) { + /* Read pointer area */ + status = ixgbe_read_ee_hostif_buffer_X550(hw, 0, + IXGBE_EEPROM_LAST_WORD + 1, + eeprom_ptrs); + if (status) { + DEBUGOUT("Failed to read EEPROM image\n"); + return status; + } + local_buffer = eeprom_ptrs; + } else { + if (buffer_size < IXGBE_EEPROM_LAST_WORD) + return IXGBE_ERR_PARAM; + local_buffer = buffer; + } + + /* + * For X550 hardware include 0x0-0x41 in the checksum, skip the + * checksum word itself + */ + for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++) + if (i != IXGBE_EEPROM_CHECKSUM) + checksum += local_buffer[i]; + + /* + * Include all data from pointers 0x3, 0x6-0xE. This excludes the + * FW, PHY module, and PCIe Expansion/Option ROM pointers. + */ + for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) { + if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR) + continue; + + pointer = local_buffer[i]; + + /* Skip pointer section if the pointer is invalid. */ + if (pointer == 0xFFFF || pointer == 0 || + pointer >= hw->eeprom.word_size) + continue; + + switch (i) { + case IXGBE_PCIE_GENERAL_PTR: + size = IXGBE_IXGBE_PCIE_GENERAL_SIZE; + break; + case IXGBE_PCIE_CONFIG0_PTR: + case IXGBE_PCIE_CONFIG1_PTR: + size = IXGBE_PCIE_CONFIG_SIZE; + break; + default: + size = 0; + break; + } + + status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum, + buffer, buffer_size); + if (status) + return status; + } + + checksum = (u16)IXGBE_EEPROM_SUM - checksum; + + return (s32)checksum; +} + +/** + * ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum + * @hw: pointer to hardware structure + * + * Returns a negative error code on error, or the 16-bit checksum + **/ +s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw) +{ + return ixgbe_calc_checksum_X550(hw, NULL, 0); +} + +/** + * ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum + * + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. + **/ +s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val) +{ + s32 status; + u16 checksum; + u16 read_checksum = 0; + + DEBUGFUNC("ixgbe_validate_eeprom_checksum_X550"); + + /* Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + if (status) { + DEBUGOUT("EEPROM read failed\n"); + return status; + } + + status = hw->eeprom.ops.calc_checksum(hw); + if (status < 0) + return status; + + checksum = (u16)(status & 0xffff); + + status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM, + &read_checksum); + if (status) + return status; + + /* Verify read checksum from EEPROM is the same as + * calculated checksum + */ + if (read_checksum != checksum) { + status = IXGBE_ERR_EEPROM_CHECKSUM; + ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE, + "Invalid EEPROM checksum"); + } + + /* If the user cares, return the calculated checksum */ + if (checksum_val) + *checksum_val = checksum; + + return status; +} + +/** + * ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash + * @hw: pointer to hardware structure + * + * After writing EEPROM to shadow RAM using EEWR register, software calculates + * checksum and updates the EEPROM and instructs the hardware to update + * the flash. + **/ +s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw) +{ + s32 status; + u16 checksum = 0; + + DEBUGFUNC("ixgbe_update_eeprom_checksum_X550"); + + /* Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum); + if (status) { + DEBUGOUT("EEPROM read failed\n"); + return status; + } + + status = ixgbe_calc_eeprom_checksum_X550(hw); + if (status < 0) + return status; + + checksum = (u16)(status & 0xffff); + + status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM, + checksum); + if (status) + return status; + + status = ixgbe_update_flash_X550(hw); + + return status; +} + +/** + * ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device + * @hw: pointer to hardware structure + * + * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash. + **/ +s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_SUCCESS; + union ixgbe_hic_hdr2 buffer; + + DEBUGFUNC("ixgbe_update_flash_X550"); + + buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD; + buffer.req.buf_lenh = 0; + buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN; + buffer.req.checksum = FW_DEFAULT_CHECKSUM; + + status = ixgbe_host_interface_command(hw, (u32 *)&buffer, + sizeof(buffer), + IXGBE_HI_COMMAND_TIMEOUT, false); + + return status; +} + +/** + * ixgbe_get_supported_physical_layer_X550em - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +u64 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw) +{ + u64 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u16 ext_ability = 0; + + DEBUGFUNC("ixgbe_get_supported_physical_layer_X550em"); + + hw->phy.ops.identify(hw); + + switch (hw->phy.type) { + case ixgbe_phy_x550em_kr: + if (hw->mac.type == ixgbe_mac_X550EM_a) { + if (hw->phy.nw_mng_if_sel & + IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G) { + physical_layer = + IXGBE_PHYSICAL_LAYER_2500BASE_KX; + break; + } else if (hw->device_id == + IXGBE_DEV_ID_X550EM_A_KR_L) { + physical_layer = + IXGBE_PHYSICAL_LAYER_1000BASE_KX; + break; + } + } + /* fall through */ + case ixgbe_phy_x550em_xfi: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR | + IXGBE_PHYSICAL_LAYER_1000BASE_KX; + break; + case ixgbe_phy_x550em_kx4: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4 | + IXGBE_PHYSICAL_LAYER_1000BASE_KX; + break; + case ixgbe_phy_x550em_ext_t: + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, + &ext_ability); + if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + break; + case ixgbe_phy_fw: + if (hw->phy.speeds_supported & IXGBE_LINK_SPEED_1GB_FULL) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (hw->phy.speeds_supported & IXGBE_LINK_SPEED_100_FULL) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + if (hw->phy.speeds_supported & IXGBE_LINK_SPEED_10_FULL) + physical_layer |= IXGBE_PHYSICAL_LAYER_10BASE_T; + break; + case ixgbe_phy_sgmii: +#ifdef PREBOOT_SUPPORT + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | + IXGBE_PHYSICAL_LAYER_100BASE_TX | + IXGBE_PHYSICAL_LAYER_10BASE_T; +#else + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; +#endif /* PREBOOT_SUPPORT */ + break; + case ixgbe_phy_ext_1g_t: + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + break; + default: + break; } - return ixgbe_setup_ixfi_x550em(hw, &force_speed); + if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) + physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw); + + return physical_layer; } /** - * ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback. + * ixgbe_get_bus_info_x550em - Set PCI bus info + * @hw: pointer to hardware structure + * + * Sets bus link width and speed to unknown because X550em is + * not a PCI device. + **/ +s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw) +{ + + DEBUGFUNC("ixgbe_get_bus_info_x550em"); + + hw->bus.width = ixgbe_bus_width_unknown; + hw->bus.speed = ixgbe_bus_speed_unknown; + + hw->mac.ops.set_lan_id(hw); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_disable_rx_x550 - Disable RX unit + * @hw: pointer to hardware structure + * + * Enables the Rx DMA unit for x550 + **/ +void ixgbe_disable_rx_x550(struct ixgbe_hw *hw) +{ + u32 rxctrl, pfdtxgswc; + s32 status; + struct ixgbe_hic_disable_rxen fw_cmd; + + DEBUGFUNC("ixgbe_enable_rx_dma_x550"); + + rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + if (rxctrl & IXGBE_RXCTRL_RXEN) { + pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC); + if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) { + pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN; + IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc); + hw->mac.set_lben = true; + } else { + hw->mac.set_lben = false; + } + + fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD; + fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN; + fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; + fw_cmd.port_number = (u8)hw->bus.lan_id; + + status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, + sizeof(struct ixgbe_hic_disable_rxen), + IXGBE_HI_COMMAND_TIMEOUT, true); + + /* If we fail - disable RX using register write */ + if (status) { + rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + if (rxctrl & IXGBE_RXCTRL_RXEN) { + rxctrl &= ~IXGBE_RXCTRL_RXEN; + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl); + } + } + } +} + +/** + * ixgbe_enter_lplu_x550em - Transition to low power states * @hw: pointer to hardware structure * - * Configures the integrated KR PHY to use internal loopback mode. + * Configures Low Power Link Up on transition to low power states + * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting the + * X557 PHY immediately prior to entering LPLU. **/ -s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw) +s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) { + u16 an_10g_cntl_reg, autoneg_reg, speed; s32 status; - u32 reg_val; + ixgbe_link_speed lcd_speed; + u32 save_autoneg; + bool link_up; + + /* SW LPLU not required on later HW revisions. */ + if ((hw->mac.type == ixgbe_mac_X550EM_x) && + (IXGBE_FUSES0_REV_MASK & + IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))) + return IXGBE_SUCCESS; - /* Disable AN and force speed to 10G Serial. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); - if (status != IXGBE_SUCCESS) - return status; - reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; - reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; - reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + /* If blocked by MNG FW, then don't restart AN */ + if (ixgbe_check_reset_blocked(hw)) + return IXGBE_SUCCESS; + + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); if (status != IXGBE_SUCCESS) return status; - /* Set near-end loopback clocks. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + status = ixgbe_read_eeprom(hw, NVM_INIT_CTRL_3, &hw->eeprom.ctrl_word_3); + if (status != IXGBE_SUCCESS) return status; - reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B; - reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + /* If link is down, LPLU disabled in NVM, WoL disabled, or manageability + * disabled, then force link down by entering low power mode. + */ + if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) || + !(hw->wol_enabled || ixgbe_mng_present(hw))) + return ixgbe_set_copper_phy_power(hw, FALSE); + + /* Determine LCD */ + status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed); + if (status != IXGBE_SUCCESS) return status; - /* Set loopback enable. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + /* If no valid LCD link speed, then force link down and exit. */ + if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN) + return ixgbe_set_copper_phy_power(hw, FALSE); + + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &speed); + if (status != IXGBE_SUCCESS) return status; - reg_val |= IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); + + /* If no link now, speed is invalid so take link down */ + status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); if (status != IXGBE_SUCCESS) + return ixgbe_set_copper_phy_power(hw, false); + + /* clear everything but the speed bits */ + speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK; + + /* If current speed is already LCD, then exit. */ + if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) && + (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) || + ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) && + (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL))) return status; - /* Training bypass. */ - status = ixgbe_read_iosf_sb_reg_x550(hw, - IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + /* Clear AN completed indication */ + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); + if (status != IXGBE_SUCCESS) return status; - reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS; - status = ixgbe_write_iosf_sb_reg_x550(hw, - IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), - IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - return status; -} + status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &an_10g_cntl_reg); -/** - * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command - * assuming that the semaphore is already obtained. - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM - * - * Reads a 16 bit word from the EEPROM using the hostif. - **/ -s32 ixgbe_read_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, - u16 *data) -{ - s32 status; - struct ixgbe_hic_read_shadow_ram buffer; + if (status != IXGBE_SUCCESS) + return status; - DEBUGFUNC("ixgbe_read_ee_hostif_data_X550"); - buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; - buffer.hdr.req.buf_lenh = 0; - buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; - buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + status = hw->phy.ops.read_reg(hw, + IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_reg); - /* convert offset from words to bytes */ - buffer.address = IXGBE_CPU_TO_BE32(offset * 2); - /* one word */ - buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16)); + if (status != IXGBE_SUCCESS) + return status; - status = ixgbe_host_interface_command(hw, (u32 *)&buffer, - sizeof(buffer), - IXGBE_HI_COMMAND_TIMEOUT, false); + save_autoneg = hw->phy.autoneg_advertised; - if (status) - return status; + /* Setup link at least common link speed */ + status = hw->mac.ops.setup_link(hw, lcd_speed, false); - *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, - FW_NVM_DATA_OFFSET); + /* restore autoneg from before setting lplu speed */ + hw->phy.autoneg_advertised = save_autoneg; - return 0; + return status; } /** - * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command + * ixgbe_get_lcd_x550em - Determine lowest common denominator * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM + * @lcd_speed: pointer to lowest common link speed * - * Reads a 16 bit word from the EEPROM using the hostif. + * Determine lowest common link speed with link partner. **/ -s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, - u16 *data) +s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed) { - s32 status = IXGBE_SUCCESS; + u16 an_lp_status; + s32 status; + u16 word = hw->eeprom.ctrl_word_3; - DEBUGFUNC("ixgbe_read_ee_hostif_X550"); + *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN; - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == - IXGBE_SUCCESS) { - status = ixgbe_read_ee_hostif_data_X550(hw, offset, data); - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - } else { - status = IXGBE_ERR_SWFW_SYNC; + status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &an_lp_status); + + if (status != IXGBE_SUCCESS) + return status; + + /* If link partner advertised 1G, return 1G */ + if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) { + *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL; + return status; } + /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */ + if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) || + (word & NVM_INIT_CTRL_3_D10GMP_PORT0)) + return status; + + /* Link partner not capable of lower speeds, return 10G */ + *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL; return status; } /** - * ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif + * ixgbe_setup_fc_X550em - Set up flow control * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @words: number of words - * @data: word(s) read from the EEPROM * - * Reads a 16 bit word(s) from the EEPROM using the hostif. + * Called at init time to set up flow control. **/ -s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, - u16 offset, u16 words, u16 *data) +s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw) { - struct ixgbe_hic_read_shadow_ram buffer; - u32 current_word = 0; - u16 words_to_read; - s32 status; - u32 i; + s32 ret_val = IXGBE_SUCCESS; + u32 pause, asm_dir, reg_val; - DEBUGFUNC("ixgbe_read_ee_hostif_buffer_X550"); + DEBUGFUNC("ixgbe_setup_fc_X550em"); - /* Take semaphore for the entire operation. */ - status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - if (status) { - DEBUGOUT("EEPROM read buffer - semaphore failed\n"); - return status; + /* Validate the requested mode */ + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; } - while (words) { - if (words > FW_MAX_READ_BUFFER_SIZE / 2) - words_to_read = FW_MAX_READ_BUFFER_SIZE / 2; - else - words_to_read = words; - - buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; - buffer.hdr.req.buf_lenh = 0; - buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; - buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; - /* convert offset from words to bytes */ - buffer.address = IXGBE_CPU_TO_BE32((offset + current_word) * 2); - buffer.length = IXGBE_CPU_TO_BE16(words_to_read * 2); - - status = ixgbe_host_interface_command(hw, (u32 *)&buffer, - sizeof(buffer), - IXGBE_HI_COMMAND_TIMEOUT, - false); + /* 10gig parts do not have a word in the EEPROM to determine the + * default flow control setting, so we explicitly set it to full. + */ + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; + + /* Determine PAUSE and ASM_DIR bits. */ + switch (hw->fc.requested_mode) { + case ixgbe_fc_none: + pause = 0; + asm_dir = 0; + break; + case ixgbe_fc_tx_pause: + pause = 0; + asm_dir = 1; + break; + case ixgbe_fc_rx_pause: + /* Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE, as such we fall + * through to the fc_full statement. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + case ixgbe_fc_full: + pause = 1; + asm_dir = 1; + break; + default: + ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, + "Flow control param set incorrectly\n"); + ret_val = IXGBE_ERR_CONFIG; + goto out; + } - if (status) { - DEBUGOUT("Host interface command failed\n"); + switch (hw->device_id) { + case IXGBE_DEV_ID_X550EM_X_KR: + case IXGBE_DEV_ID_X550EM_A_KR: + case IXGBE_DEV_ID_X550EM_A_KR_L: + ret_val = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); + if (ret_val != IXGBE_SUCCESS) goto out; - } - - for (i = 0; i < words_to_read; i++) { - u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) + - 2 * i; - u32 value = IXGBE_READ_REG(hw, reg); + reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE); + if (pause) + reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; + if (asm_dir) + reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; + ret_val = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); - data[current_word] = (u16)(value & 0xffff); - current_word++; - i++; - if (i < words_to_read) { - value >>= 16; - data[current_word] = (u16)(value & 0xffff); - current_word++; - } - } - words -= words_to_read; + /* This device does not fully support AN. */ + hw->fc.disable_fc_autoneg = true; + break; + case IXGBE_DEV_ID_X550EM_X_XFI: + hw->fc.disable_fc_autoneg = true; + break; + default: + break; } out: - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - return status; + return ret_val; } /** - * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif + * ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37 * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @data: word write to the EEPROM * - * Write a 16 bit word to the EEPROM using the hostif. + * Enable flow control according to IEEE clause 37. **/ -s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, - u16 data) +void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw) { - s32 status; - struct ixgbe_hic_write_shadow_ram buffer; + u32 link_s1, lp_an_page_low, an_cntl_1; + s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED; + ixgbe_link_speed speed; + bool link_up; + + /* AN should have completed when the cable was plugged in. + * Look for reasons to bail out. Bail out if: + * - FC autoneg is disabled, or if + * - link is not up. + */ + if (hw->fc.disable_fc_autoneg) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "Flow control autoneg is disabled"); + goto out; + } - DEBUGFUNC("ixgbe_write_ee_hostif_data_X550"); + hw->mac.ops.check_link(hw, &speed, &link_up, false); + if (!link_up) { + ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down"); + goto out; + } - buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD; - buffer.hdr.req.buf_lenh = 0; - buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN; - buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; + /* Check at auto-negotiation has completed */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LINK_S1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &link_s1); - /* one word */ - buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16)); - buffer.data = data; - buffer.address = IXGBE_CPU_TO_BE32(offset * 2); + if (status != IXGBE_SUCCESS || + (link_s1 & IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE) == 0) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + status = IXGBE_ERR_FC_NOT_NEGOTIATED; + goto out; + } - status = ixgbe_host_interface_command(hw, (u32 *)&buffer, - sizeof(buffer), - IXGBE_HI_COMMAND_TIMEOUT, false); + /* Read the 10g AN autoc and LP ability registers and resolve + * local flow control settings accordingly + */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl_1); - return status; + if (status != IXGBE_SUCCESS) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + goto out; + } + + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_LP_BASE_PAGE_HIGH(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &lp_an_page_low); + + if (status != IXGBE_SUCCESS) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + goto out; + } + + status = ixgbe_negotiate_fc(hw, an_cntl_1, lp_an_page_low, + IXGBE_KRM_AN_CNTL_1_SYM_PAUSE, + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE, + IXGBE_KRM_LP_BASE_PAGE_HIGH_SYM_PAUSE, + IXGBE_KRM_LP_BASE_PAGE_HIGH_ASM_PAUSE); + +out: + if (status == IXGBE_SUCCESS) { + hw->fc.fc_was_autonegged = true; + } else { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + } } /** - * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif + * ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @data: word write to the EEPROM * - * Write a 16 bit word to the EEPROM using the hostif. **/ -s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, - u16 data) +void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw) { - s32 status = IXGBE_SUCCESS; + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; +} - DEBUGFUNC("ixgbe_write_ee_hostif_X550"); +/** + * ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure + * + * Enable flow control according to IEEE clause 37. + **/ +void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED; + u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 }; + ixgbe_link_speed speed; + bool link_up; + + /* AN should have completed when the cable was plugged in. + * Look for reasons to bail out. Bail out if: + * - FC autoneg is disabled, or if + * - link is not up. + */ + if (hw->fc.disable_fc_autoneg) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "Flow control autoneg is disabled"); + goto out; + } - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == - IXGBE_SUCCESS) { - status = ixgbe_write_ee_hostif_data_X550(hw, offset, data); - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - } else { - DEBUGOUT("write ee hostif failed to get semaphore"); - status = IXGBE_ERR_SWFW_SYNC; + hw->mac.ops.check_link(hw, &speed, &link_up, false); + if (!link_up) { + ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down"); + goto out; } - return status; + /* Check if auto-negotiation has completed */ + status = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &info); + if (status != IXGBE_SUCCESS || + !(info[0] & FW_PHY_ACT_GET_LINK_INFO_AN_COMPLETE)) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + status = IXGBE_ERR_FC_NOT_NEGOTIATED; + goto out; + } + + /* Negotiate the flow control */ + status = ixgbe_negotiate_fc(hw, info[0], info[0], + FW_PHY_ACT_GET_LINK_INFO_FC_RX, + FW_PHY_ACT_GET_LINK_INFO_FC_TX, + FW_PHY_ACT_GET_LINK_INFO_LP_FC_RX, + FW_PHY_ACT_GET_LINK_INFO_LP_FC_TX); + +out: + if (status == IXGBE_SUCCESS) { + hw->fc.fc_was_autonegged = true; + } else { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + } } /** - * ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif + * ixgbe_setup_fc_backplane_x550em_a - Set up flow control * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @words: number of words - * @data: word(s) write to the EEPROM * - * Write a 16 bit word(s) to the EEPROM using the hostif. + * Called at init time to set up flow control. **/ -s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw, - u16 offset, u16 words, u16 *data) +s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw) { s32 status = IXGBE_SUCCESS; - u32 i = 0; + u32 an_cntl = 0; - DEBUGFUNC("ixgbe_write_ee_hostif_buffer_X550"); + DEBUGFUNC("ixgbe_setup_fc_backplane_x550em_a"); - /* Take semaphore for the entire operation. */ - status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - if (status != IXGBE_SUCCESS) { - DEBUGOUT("EEPROM write buffer - semaphore failed\n"); - goto out; + /* Validate the requested mode */ + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); + return IXGBE_ERR_INVALID_LINK_SETTINGS; } - for (i = 0; i < words; i++) { - status = ixgbe_write_ee_hostif_data_X550(hw, offset + i, - data[i]); + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; - if (status != IXGBE_SUCCESS) { - DEBUGOUT("Eeprom buffered write failed\n"); - break; - } + /* Set up the 1G and 10G flow control advertisement registers so the + * HW will be able to do FC autoneg once the cable is plugged in. If + * we link at 10G, the 1G advertisement is harmless and vice versa. + */ + status = hw->mac.ops.read_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl); + + if (status != IXGBE_SUCCESS) { + DEBUGOUT("Auto-Negotiation did not complete\n"); + return status; } - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); -out: + /* The possible values of fc.requested_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. + * other: Invalid. + */ + switch (hw->fc.requested_mode) { + case ixgbe_fc_none: + /* Flow control completely disabled by software override. */ + an_cntl &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE); + break; + case ixgbe_fc_tx_pause: + /* Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + an_cntl |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; + an_cntl &= ~IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; + break; + case ixgbe_fc_rx_pause: + /* Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE, as such we fall + * through to the fc_full statement. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + an_cntl |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | + IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; + break; + default: + ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, + "Flow control param set incorrectly\n"); + return IXGBE_ERR_CONFIG; + } + + status = hw->mac.ops.write_iosf_sb_reg(hw, + IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), + IXGBE_SB_IOSF_TARGET_KR_PHY, an_cntl); + + /* Restart auto-negotiation. */ + status = ixgbe_restart_an_internal_phy_x550em(hw); return status; } /** - * ixgbe_checksum_ptr_x550 - Checksum one pointer region + * ixgbe_set_mux - Set mux for port 1 access with CS4227 * @hw: pointer to hardware structure - * @ptr: pointer offset in eeprom - * @size: size of section pointed by ptr, if 0 first word will be used as size - * @csum: address of checksum to update - * - * Returns error status for any failure + * @state: set mux if 1, clear if 0 */ -STATIC s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr, - u16 size, u16 *csum, u16 *buffer, - u32 buffer_size) +STATIC void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state) { - u16 buf[256]; - s32 status; - u16 length, bufsz, i, start; - u16 *local_buffer; - - bufsz = sizeof(buf) / sizeof(buf[0]); + u32 esdp; - /* Read a chunk at the pointer location */ - if (!buffer) { - status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf); - if (status) { - DEBUGOUT("Failed to read EEPROM image\n"); - return status; - } - local_buffer = buf; - } else { - if (buffer_size < ptr) - return IXGBE_ERR_PARAM; - local_buffer = &buffer[ptr]; - } + if (!hw->bus.lan_id) + return; + esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (state) + esdp |= IXGBE_ESDP_SDP1; + else + esdp &= ~IXGBE_ESDP_SDP1; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); + IXGBE_WRITE_FLUSH(hw); +} - if (size) { - start = 0; - length = size; - } else { - start = 1; - length = local_buffer[0]; +/** + * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore and sets the I2C MUX + **/ +s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) +{ + s32 status; - /* Skip pointer section if length is invalid. */ - if (length == 0xFFFF || length == 0 || - (ptr + length) >= hw->eeprom.word_size) - return IXGBE_SUCCESS; - } + DEBUGFUNC("ixgbe_acquire_swfw_sync_X550em"); - if (buffer && ((u32)start + (u32)length > buffer_size)) - return IXGBE_ERR_PARAM; + status = ixgbe_acquire_swfw_sync_X540(hw, mask); + if (status) + return status; - for (i = start; length; i++, length--) { - if (i == bufsz && !buffer) { - ptr += bufsz; - i = 0; - if (length < bufsz) - bufsz = length; + if (mask & IXGBE_GSSR_I2C_MASK) + ixgbe_set_mux(hw, 1); - /* Read a chunk at the pointer location */ - status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, - bufsz, buf); - if (status) { - DEBUGOUT("Failed to read EEPROM image\n"); - return status; - } - } - *csum += local_buffer[i]; - } return IXGBE_SUCCESS; } /** - * ixgbe_calc_checksum_X550 - Calculates and returns the checksum + * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore * @hw: pointer to hardware structure - * @buffer: pointer to buffer containing calculated checksum - * @buffer_size: size of buffer + * @mask: Mask to specify which semaphore to release * - * Returns a negative error code on error, or the 16-bit checksum + * Releases the SWFW semaphore and sets the I2C MUX **/ -s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size) +void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) { - u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1]; - u16 *local_buffer; - s32 status; - u16 checksum = 0; - u16 pointer, i, size; + DEBUGFUNC("ixgbe_release_swfw_sync_X550em"); - DEBUGFUNC("ixgbe_calc_eeprom_checksum_X550"); + if (mask & IXGBE_GSSR_I2C_MASK) + ixgbe_set_mux(hw, 0); - hw->eeprom.ops.init_params(hw); + ixgbe_release_swfw_sync_X540(hw, mask); +} - if (!buffer) { - /* Read pointer area */ - status = ixgbe_read_ee_hostif_buffer_X550(hw, 0, - IXGBE_EEPROM_LAST_WORD + 1, - eeprom_ptrs); +/** + * ixgbe_acquire_swfw_sync_X550a - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore and get the shared phy token as needed + */ +STATIC s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask) +{ + u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM; + int retries = FW_PHY_TOKEN_RETRIES; + s32 status = IXGBE_SUCCESS; + + DEBUGFUNC("ixgbe_acquire_swfw_sync_X550a"); + + while (--retries) { + status = IXGBE_SUCCESS; + if (hmask) + status = ixgbe_acquire_swfw_sync_X540(hw, hmask); if (status) { - DEBUGOUT("Failed to read EEPROM image\n"); + DEBUGOUT1("Could not acquire SWFW semaphore, Status = %d\n", + status); return status; } - local_buffer = eeprom_ptrs; - } else { - if (buffer_size < IXGBE_EEPROM_LAST_WORD) - return IXGBE_ERR_PARAM; - local_buffer = buffer; - } - - /* - * For X550 hardware include 0x0-0x41 in the checksum, skip the - * checksum word itself - */ - for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++) - if (i != IXGBE_EEPROM_CHECKSUM) - checksum += local_buffer[i]; - - /* - * Include all data from pointers 0x3, 0x6-0xE. This excludes the - * FW, PHY module, and PCIe Expansion/Option ROM pointers. - */ - for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) { - if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR) - continue; + if (!(mask & IXGBE_GSSR_TOKEN_SM)) + return IXGBE_SUCCESS; - pointer = local_buffer[i]; + status = ixgbe_get_phy_token(hw); + if (status == IXGBE_ERR_TOKEN_RETRY) + DEBUGOUT1("Could not acquire PHY token, Status = %d\n", + status); - /* Skip pointer section if the pointer is invalid. */ - if (pointer == 0xFFFF || pointer == 0 || - pointer >= hw->eeprom.word_size) - continue; + if (status == IXGBE_SUCCESS) + return IXGBE_SUCCESS; - switch (i) { - case IXGBE_PCIE_GENERAL_PTR: - size = IXGBE_IXGBE_PCIE_GENERAL_SIZE; - break; - case IXGBE_PCIE_CONFIG0_PTR: - case IXGBE_PCIE_CONFIG1_PTR: - size = IXGBE_PCIE_CONFIG_SIZE; - break; - default: - size = 0; - break; - } + if (hmask) + ixgbe_release_swfw_sync_X540(hw, hmask); - status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum, - buffer, buffer_size); - if (status) + if (status != IXGBE_ERR_TOKEN_RETRY) { + DEBUGOUT1("Unable to retry acquiring the PHY token, Status = %d\n", + status); return status; + } } - checksum = (u16)IXGBE_EEPROM_SUM - checksum; + DEBUGOUT1("Semaphore acquisition retries failed!: PHY ID = 0x%08X\n", + hw->phy.id); + return status; +} - return (s32)checksum; +/** + * ixgbe_release_swfw_sync_X550a - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore and puts the shared phy token as needed + */ +STATIC void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask) +{ + u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM; + + DEBUGFUNC("ixgbe_release_swfw_sync_X550a"); + + if (mask & IXGBE_GSSR_TOKEN_SM) + ixgbe_put_phy_token(hw); + + if (hmask) + ixgbe_release_swfw_sync_X540(hw, hmask); } /** - * ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum + * ixgbe_read_phy_reg_x550a - Reads specified PHY register * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @device_type: 5 bit device type + * @phy_data: Pointer to read data from PHY register * - * Returns a negative error code on error, or the 16-bit checksum + * Reads a value from a specified PHY register using the SWFW lock and PHY + * Token. The PHY Token is needed since the MDIO is shared between to MAC + * instances. **/ -s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw) +s32 ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data) { - return ixgbe_calc_checksum_X550(hw, NULL, 0); + s32 status; + u32 mask = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM; + + DEBUGFUNC("ixgbe_read_phy_reg_x550a"); + + if (hw->mac.ops.acquire_swfw_sync(hw, mask)) + return IXGBE_ERR_SWFW_SYNC; + + status = hw->phy.ops.read_reg_mdi(hw, reg_addr, device_type, phy_data); + + hw->mac.ops.release_swfw_sync(hw, mask); + + return status; } /** - * ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum + * ixgbe_write_phy_reg_x550a - Writes specified PHY register * @hw: pointer to hardware structure - * @checksum_val: calculated checksum + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register * - * Performs checksum calculation and validates the EEPROM checksum. If the - * caller does not need checksum_val, the value can be NULL. + * Writes a value to specified PHY register using the SWFW lock and PHY Token. + * The PHY Token is needed since the MDIO is shared between to MAC instances. **/ -s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val) +s32 ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) { s32 status; - u16 checksum; - u16 read_checksum = 0; + u32 mask = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM; - DEBUGFUNC("ixgbe_validate_eeprom_checksum_X550"); + DEBUGFUNC("ixgbe_write_phy_reg_x550a"); - /* Read the first word from the EEPROM. If this times out or fails, do - * not continue or we could be in for a very long wait while every - * EEPROM read fails - */ - status = hw->eeprom.ops.read(hw, 0, &checksum); - if (status) { - DEBUGOUT("EEPROM read failed\n"); - return status; + if (hw->mac.ops.acquire_swfw_sync(hw, mask) == IXGBE_SUCCESS) { + status = hw->phy.ops.write_reg_mdi(hw, reg_addr, device_type, + phy_data); + hw->mac.ops.release_swfw_sync(hw, mask); + } else { + status = IXGBE_ERR_SWFW_SYNC; } - status = hw->eeprom.ops.calc_checksum(hw); - if (status < 0) - return status; + return status; +} - checksum = (u16)(status & 0xffff); +/** + * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt + * @hw: pointer to hardware structure + * + * Handle external Base T PHY interrupt. If high temperature + * failure alarm then return error, else if link status change + * then setup internal/external PHY link + * + * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature + * failure alarm, else return PHY access status. + */ +s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw) +{ + bool lsc; + u32 status; - status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM, - &read_checksum); - if (status) - return status; + status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); - /* Verify read checksum from EEPROM is the same as - * calculated checksum - */ - if (read_checksum != checksum) { - status = IXGBE_ERR_EEPROM_CHECKSUM; - ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE, - "Invalid EEPROM checksum"); - } + if (status != IXGBE_SUCCESS) + return status; - /* If the user cares, return the calculated checksum */ - if (checksum_val) - *checksum_val = checksum; + if (lsc) + return ixgbe_setup_internal_phy(hw); - return status; + return IXGBE_SUCCESS; } /** - * ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash + * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg_wait_to_complete: true when waiting for completion is needed * - * After writing EEPROM to shadow RAM using EEWR register, software calculates - * checksum and updates the EEPROM and instructs the hardware to update - * the flash. + * Setup internal/external PHY link speed based on link speed, then set + * external PHY auto advertised link speed. + * + * Returns error status for any failure **/ -s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw) +s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg_wait_to_complete) { s32 status; - u16 checksum = 0; + ixgbe_link_speed force_speed; - DEBUGFUNC("ixgbe_update_eeprom_checksum_X550"); + DEBUGFUNC("ixgbe_setup_mac_link_t_X550em"); - /* Read the first word from the EEPROM. If this times out or fails, do - * not continue or we could be in for a very long wait while every - * EEPROM read fails + /* Setup internal/external PHY link speed to iXFI (10G), unless + * only 1G is auto advertised then setup KX link. */ - status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum); - if (status) { - DEBUGOUT("EEPROM read failed\n"); - return status; + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + force_speed = IXGBE_LINK_SPEED_10GB_FULL; + else + force_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* If X552 and internal link mode is XFI, then setup XFI internal link. + */ + if (hw->mac.type == ixgbe_mac_X550EM_x && + !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { + status = ixgbe_setup_ixfi_x550em(hw, &force_speed); + + if (status != IXGBE_SUCCESS) + return status; } - status = ixgbe_calc_eeprom_checksum_X550(hw); - if (status < 0) - return status; + return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete); +} - checksum = (u16)(status & 0xffff); +/** + * ixgbe_check_link_t_X550em - Determine link and speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true when link is up + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Check that both the MAC and X557 external PHY have link. + **/ +s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete) +{ + u32 status; + u16 i, autoneg_status = 0; - status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM, - checksum); - if (status) + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) + return IXGBE_ERR_CONFIG; + + status = ixgbe_check_mac_link_generic(hw, speed, link_up, + link_up_wait_to_complete); + + /* If check link fails or MAC link is not up, then return */ + if (status != IXGBE_SUCCESS || !(*link_up)) return status; - status = ixgbe_update_flash_X550(hw); + /* MAC link is up, so check external PHY link. + * X557 PHY. Link status is latching low, and can only be used to detect + * link drop, and not the current status of the link without performing + * back-to-back reads. + */ + for (i = 0; i < 2; i++) { + status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, + IXGBE_MDIO_AUTO_NEG_DEV_TYPE, + &autoneg_status); - return status; + if (status != IXGBE_SUCCESS) + return status; + } + + /* If external PHY link is not up, then indicate link not up */ + if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS)) + *link_up = false; + + return IXGBE_SUCCESS; } /** - * ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device + * ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI * @hw: pointer to hardware structure - * - * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash. **/ -s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw) +s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw) { - s32 status = IXGBE_SUCCESS; - union ixgbe_hic_hdr2 buffer; - - DEBUGFUNC("ixgbe_update_flash_X550"); + s32 status; - buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD; - buffer.req.buf_lenh = 0; - buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN; - buffer.req.checksum = FW_DEFAULT_CHECKSUM; + status = ixgbe_reset_phy_generic(hw); - status = ixgbe_host_interface_command(hw, (u32 *)&buffer, - sizeof(buffer), - IXGBE_HI_COMMAND_TIMEOUT, false); + if (status != IXGBE_SUCCESS) + return status; - return status; + /* Configure Link Status Alarm and Temperature Threshold interrupts */ + return ixgbe_enable_lasi_ext_t_x550em(hw); } /** - * ixgbe_get_supported_physical_layer_X550em - Returns physical layer type + * ixgbe_led_on_t_X550em - Turns on the software controllable LEDs. * @hw: pointer to hardware structure - * - * Determines physical layer capabilities of the current configuration. + * @led_idx: led number to turn on **/ -u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw) +s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx) { - u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; - u16 ext_ability = 0; - - DEBUGFUNC("ixgbe_get_supported_physical_layer_X550em"); + u16 phy_data; - hw->phy.ops.identify(hw); + DEBUGFUNC("ixgbe_led_on_t_X550em"); - switch (hw->phy.type) { - case ixgbe_phy_x550em_kr: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR | - IXGBE_PHYSICAL_LAYER_1000BASE_KX; - break; - case ixgbe_phy_x550em_kx4: - physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4 | - IXGBE_PHYSICAL_LAYER_1000BASE_KX; - break; - case ixgbe_phy_x550em_ext_t: - hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, - IXGBE_MDIO_PMA_PMD_DEV_TYPE, - &ext_ability); - if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; - if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) - physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; - break; - default: - break; - } + if (led_idx >= IXGBE_X557_MAX_LED_INDEX) + return IXGBE_ERR_PARAM; - if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) - physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw); + /* To turn on the LED, set mode to ON. */ + ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data); + phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK; + ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data); - return physical_layer; + /* Some designs have the LEDs wired to the MAC */ + return ixgbe_led_on_generic(hw, led_idx); } /** - * ixgbe_get_bus_info_x550em - Set PCI bus info - * @hw: pointer to hardware structure - * - * Sets bus link width and speed to unknown because X550em is - * not a PCI device. + * ixgbe_led_off_t_X550em - Turns off the software controllable LEDs. + * @hw: pointer to hardware structure + * @led_idx: led number to turn off **/ -s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw) +s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx) { + u16 phy_data; - DEBUGFUNC("ixgbe_get_bus_info_x550em"); + DEBUGFUNC("ixgbe_led_off_t_X550em"); - hw->bus.width = ixgbe_bus_width_unknown; - hw->bus.speed = ixgbe_bus_speed_unknown; + if (led_idx >= IXGBE_X557_MAX_LED_INDEX) + return IXGBE_ERR_PARAM; - return IXGBE_SUCCESS; + /* To turn on the LED, set mode to ON. */ + ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data); + phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK; + ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, + IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data); + + /* Some designs have the LEDs wired to the MAC */ + return ixgbe_led_off_generic(hw, led_idx); } /** - * ixgbe_disable_rx_x550 - Disable RX unit + * ixgbe_set_fw_drv_ver_x550 - Sends driver version to firmware + * @hw: pointer to the HW structure + * @maj: driver version major number + * @min: driver version minor number + * @build: driver version build number + * @sub: driver version sub build number + * @len: length of driver_ver string + * @driver_ver: driver string * - * Enables the Rx DMA unit for x550 + * Sends driver version number to firmware through the manageability + * block. On success return IXGBE_SUCCESS + * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring + * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. **/ -void ixgbe_disable_rx_x550(struct ixgbe_hw *hw) +s32 ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min, + u8 build, u8 sub, u16 len, const char *driver_ver) { - u32 rxctrl, pfdtxgswc; - s32 status; - struct ixgbe_hic_disable_rxen fw_cmd; + struct ixgbe_hic_drv_info2 fw_cmd; + s32 ret_val = IXGBE_SUCCESS; + int i; + + DEBUGFUNC("ixgbe_set_fw_drv_ver_x550"); + + if ((len == 0) || (driver_ver == NULL) || + (len > sizeof(fw_cmd.driver_string))) + return IXGBE_ERR_INVALID_ARGUMENT; + + fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; + fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN + len; + fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; + fw_cmd.port_num = (u8)hw->bus.func; + fw_cmd.ver_maj = maj; + fw_cmd.ver_min = min; + fw_cmd.ver_build = build; + fw_cmd.ver_sub = sub; + fw_cmd.hdr.checksum = 0; + memcpy(fw_cmd.driver_string, driver_ver, len); + fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd, + (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len)); + + for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { + ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, + sizeof(fw_cmd), + IXGBE_HI_COMMAND_TIMEOUT, + true); + if (ret_val != IXGBE_SUCCESS) + continue; - DEBUGFUNC("ixgbe_enable_rx_dma_x550"); + if (fw_cmd.hdr.cmd_or_resp.ret_status == + FW_CEM_RESP_STATUS_SUCCESS) + ret_val = IXGBE_SUCCESS; + else + ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); - if (rxctrl & IXGBE_RXCTRL_RXEN) { - pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC); - if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) { - pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN; - IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc); - hw->mac.set_lben = true; - } else { - hw->mac.set_lben = false; - } + break; + } - fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD; - fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN; - fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; - fw_cmd.port_number = (u8)hw->bus.lan_id; + return ret_val; +} - status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, - sizeof(struct ixgbe_hic_disable_rxen), - IXGBE_HI_COMMAND_TIMEOUT, true); +/** + * ixgbe_fw_recovery_mode_X550 - Check FW NVM recovery mode + * @hw: pointer t hardware structure + * + * Returns true if in FW NVM recovery mode. + **/ +bool ixgbe_fw_recovery_mode_X550(struct ixgbe_hw *hw) +{ + u32 fwsm; - /* If we fail - disable RX using register write */ - if (status) { - rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); - if (rxctrl & IXGBE_RXCTRL_RXEN) { - rxctrl &= ~IXGBE_RXCTRL_RXEN; - IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl); - } - } - } + fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM_BY_MAC(hw)); + + return !!(fwsm & IXGBE_FWSM_FW_NVM_RECOVERY_MODE); }