X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Fixgbe_rxtx.h;h=2608b36415828b1e12d8b31a8881633abaec2033;hb=8a44c15aa57d853efc8a1588239e87c2ef976d8e;hp=1557438ed3c21a1a5d3623c2677fa82219879d00;hpb=0369957f27aba349bd2b9f8a46c4a75f349aecb8;p=dpdk.git

diff --git a/drivers/net/ixgbe/ixgbe_rxtx.h b/drivers/net/ixgbe/ixgbe_rxtx.h
index 1557438ed3..2608b36415 100644
--- a/drivers/net/ixgbe/ixgbe_rxtx.h
+++ b/drivers/net/ixgbe/ixgbe_rxtx.h
@@ -34,29 +34,37 @@
 #ifndef _IXGBE_RXTX_H_
 #define _IXGBE_RXTX_H_
 
+/*
+ * Rings setup and release.
+ *
+ * TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be
+ * multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary. This will
+ * also optimize cache line size effect. H/W supports up to cache line size 128.
+ */
+#define	IXGBE_ALIGN	128
 
-#define RTE_PMD_IXGBE_TX_MAX_BURST 32
-#define RTE_PMD_IXGBE_RX_MAX_BURST 32
+#define IXGBE_RXD_ALIGN	(IXGBE_ALIGN / sizeof(union ixgbe_adv_rx_desc))
+#define IXGBE_TXD_ALIGN	(IXGBE_ALIGN / sizeof(union ixgbe_adv_tx_desc))
 
-#ifdef RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC
-#define RTE_IXGBE_DESCS_PER_LOOP           4
-#elif defined(RTE_IXGBE_INC_VECTOR)
-#define RTE_IXGBE_DESCS_PER_LOOP           4
-#else
-#define RTE_IXGBE_DESCS_PER_LOOP           1
-#endif
+/*
+ * Maximum number of Ring Descriptors.
+ *
+ * Since RDLEN/TDLEN should be multiple of 128 bytes, the number of ring
+ * descriptors should meet the following condition:
+ *      (num_ring_desc * sizeof(rx/tx descriptor)) % 128 == 0
+ */
+#define	IXGBE_MIN_RING_DESC	32
+#define	IXGBE_MAX_RING_DESC	4096
 
-#define RTE_MBUF_DATA_DMA_ADDR(mb) \
-	(uint64_t) ((mb)->buf_physaddr + (mb)->data_off)
+#define RTE_PMD_IXGBE_TX_MAX_BURST 32
+#define RTE_PMD_IXGBE_RX_MAX_BURST 32
+#define RTE_IXGBE_TX_MAX_FREE_BUF_SZ 64
 
-#define RTE_MBUF_DATA_DMA_ADDR_DEFAULT(mb) \
-	(uint64_t) ((mb)->buf_physaddr + RTE_PKTMBUF_HEADROOM)
+#define RTE_IXGBE_DESCS_PER_LOOP    4
 
 #ifdef RTE_IXGBE_INC_VECTOR
-#define RTE_IXGBE_VPMD_RX_BURST         32
-#define RTE_IXGBE_VPMD_TX_BURST         32
-#define RTE_IXGBE_RXQ_REARM_THRESH      RTE_IXGBE_VPMD_RX_BURST
-#define RTE_IXGBE_TX_MAX_FREE_BUF_SZ    64
+#define RTE_IXGBE_RXQ_REARM_THRESH      32
+#define RTE_IXGBE_MAX_RX_BURST          RTE_IXGBE_RXQ_REARM_THRESH
 #endif
 
 #define RX_RING_SZ ((IXGBE_MAX_RING_DESC + RTE_IXGBE_DESCS_PER_LOOP - 1) * \
@@ -72,6 +80,11 @@
 #define RTE_IXGBE_WAIT_100_US               100
 #define RTE_IXGBE_VMTXSW_REGISTER_COUNT     2
 
+#define IXGBE_PACKET_TYPE_MASK_82599        0X7F
+#define IXGBE_PACKET_TYPE_MASK_X550         0X10FF
+#define IXGBE_PACKET_TYPE_MASK_TUNNEL       0XFF
+#define IXGBE_PACKET_TYPE_TUNNEL_BIT        0X1000
+
 /**
  * Structure associated with each descriptor of the RX ring of a RX queue.
  */
@@ -116,11 +129,9 @@ struct ixgbe_rx_queue {
 	uint16_t            nb_rx_desc; /**< number of RX descriptors. */
 	uint16_t            rx_tail;  /**< current value of RDT register. */
 	uint16_t            nb_rx_hold; /**< number of held free RX desc. */
-#ifdef RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC
 	uint16_t rx_nb_avail; /**< nr of staged pkts ready to ret to app */
 	uint16_t rx_next_avail; /**< idx of next staged pkt to ret to app */
 	uint16_t rx_free_trigger; /**< triggers rx buffer allocation */
-#endif
 	uint16_t            rx_using_sse;
 	/**< indicates that vector RX is in use */
 #ifdef RTE_IXGBE_INC_VECTOR
@@ -130,16 +141,17 @@ struct ixgbe_rx_queue {
 	uint16_t            rx_free_thresh; /**< max free RX desc to hold. */
 	uint16_t            queue_id; /**< RX queue index. */
 	uint16_t            reg_idx;  /**< RX queue register index. */
+	uint16_t            pkt_type_mask;  /**< Packet type mask for different NICs. */
 	uint8_t             port_id;  /**< Device port identifier. */
 	uint8_t             crc_len;  /**< 0 if CRC stripped, 4 otherwise. */
 	uint8_t             drop_en;  /**< If not 0, set SRRCTL.Drop_En. */
 	uint8_t             rx_deferred_start; /**< not in global dev start. */
-#ifdef RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC
+	/** flags to set in mbuf when a vlan is detected. */
+	uint64_t            vlan_flags;
 	/** need to alloc dummy mbuf, for wraparound when scanning hw ring */
 	struct rte_mbuf fake_mbuf;
 	/** hold packets to return to application */
 	struct rte_mbuf *rx_stage[RTE_PMD_IXGBE_RX_MAX_BURST*2];
-#endif
 };
 
 /**
@@ -153,7 +165,7 @@ enum ixgbe_advctx_num {
 
 /** Offload features */
 union ixgbe_tx_offload {
-	uint64_t data;
+	uint64_t data[2];
 	struct {
 		uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
 		uint64_t l3_len:9; /**< L3 (IP) Header Length. */
@@ -161,6 +173,10 @@ union ixgbe_tx_offload {
 		uint64_t tso_segsz:16; /**< TCP TSO segment size */
 		uint64_t vlan_tci:16;
 		/**< VLAN Tag Control Identifier (CPU order). */
+
+		/* fields for TX offloading of tunnels */
+		uint64_t outer_l3_len:8; /**< Outer L3 (IP) Hdr Length. */
+		uint64_t outer_l2_len:8; /**< Outer L2 (MAC) Hdr Length. */
 	};
 };