X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Frte_pmd_ixgbe.h;h=1f2b1bd791243e3a0d7395fec3ed2acfe083f7b4;hb=e16408499412e67a6afab8eca3d7496b770ac0e9;hp=dade57ae9f6cb2c8bae785301ebc4e97c869c651;hpb=57aa1fd284d5ae529dbbf5a947b2e0be68088458;p=dpdk.git

diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index dade57ae9f..1f2b1bd791 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -41,6 +41,20 @@
 
 #include <rte_ethdev.h>
 
+/**
+ * Notify VF when PF link status changes.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param vf
+ *   VF id.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if *vf* invalid.
+ */
+int rte_pmd_ixgbe_ping_vf(uint8_t port, uint16_t vf);
+
 /**
  * Set the VF MAC address.
  *
@@ -222,6 +236,7 @@ int rte_pmd_ixgbe_macsec_disable(uint8_t port);
  * @return
  *   - (0) if successful.
  *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
  */
 int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac);
 
@@ -237,6 +252,7 @@ int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac);
  * @return
  *   - (0) if successful.
  *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
  */
 int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi);
 
@@ -256,6 +272,7 @@ int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi);
  * @return
  *   - (0) if successful.
  *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
  *   - (-EINVAL) if bad parameter.
  */
 int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an,
@@ -277,6 +294,7 @@ int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an,
  * @return
  *   - (0) if successful.
  *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
  *   - (-EINVAL) if bad parameter.
  */
 int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an,
@@ -289,7 +307,7 @@ int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an,
 *   The port identifier of the Ethernet device.
 * @param vf
 *   VF id.
-* @param rx_mode
+* @param rx_mask
 *    The RX mode mask, which is one or more of accepting Untagged Packets,
 *    packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
 *    ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
@@ -349,9 +367,9 @@ rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on);
 * Enable/Disable hardware VF VLAN filtering by an Ethernet device of
 * received VLAN packets tagged with a given VLAN Tag Identifier.
 *
-* @param port id
+* @param port
 *   The port identifier of the Ethernet device.
-* @param vlan_id
+* @param vlan
 *   The VLAN Tag Identifier whose filtering must be enabled or disabled.
 * @param vf_mask
 *    Bitmap listing which VFs participate in the VLAN filtering.
@@ -370,7 +388,7 @@ rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask,
 /**
  * Set the rate limitation for a vf on an Ethernet device.
  *
- * @param port_id
+ * @param port
  *   The port identifier of the Ethernet device.
  * @param vf
  *   VF id.
@@ -386,6 +404,29 @@ rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask,
  */
 int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, uint64_t q_msk);
 
+/**
+ * Set all the TCs' bandwidth weight.
+ *
+ * The bw_weight means the percentage occupied by the TC.
+ * It can be taken as the relative min bandwidth setting.
+ *
+ * @param port
+ *    The port identifier of the Ethernet device.
+ * @param tc_num
+ *    Number of TCs.
+ * @param bw_weight
+ *    An array of relative bandwidth weight for all the TCs.
+ *    The summary of the bw_weight should be 100.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-EINVAL) if bad parameter.
+ *   - (-ENOTSUP) not supported by firmware.
+ */
+int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port,
+				  uint8_t tc_num,
+				  uint8_t *bw_weight);
+
 /**
  * Response sent back to ixgbe driver from user app after callback
  */