X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Frte_pmd_ixgbe.h;h=72a941f9dc8125a73c76e8d928f36311dd95eab9;hb=4a5140ab17d29e77eefa47b5cb514238e8e0c132;hp=463a78e50835302fba310eb51f74c2c9a37888b3;hpb=5566a3e35866ce9e5eacf886c27b460ebfcd6ee9;p=dpdk.git

diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index 463a78e508..72a941f9dc 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -11,7 +11,7 @@
 #ifndef _PMD_IXGBE_H_
 #define _PMD_IXGBE_H_
 
-#include <rte_ethdev.h>
+#include <rte_ethdev_driver.h>
 
 /**
  * Notify VF when PF link status changes.
@@ -573,6 +573,77 @@ int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout);
  */
 int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port);
 
+/**
+ * Acquire swfw semaphore lock for MDIO access
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (IXGBE_ERR_SWFW_SYNC) If sw/fw semaphore acquisition failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_lock(uint16_t port);
+
+/**
+ * Release swfw semaphore lock used for MDIO access
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlock(uint16_t port);
+
+/**
+ * Read PHY register using MDIO without MDIO lock
+ * The lock must be taken separately before calling this
+ * API
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param reg_addr
+ *   32 bit PHY Register
+ * @param dev_type
+ *   Used to define device base address
+ * @param phy_data
+ *   Pointer for reading PHY register data
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (IXGBE_ERR_PHY) If PHY read command failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlocked_read(uint16_t port, uint32_t reg_addr,
+				 uint32_t dev_type, uint16_t *phy_data);
+
+/**
+ * Write data to PHY register using without MDIO lock
+ * The lock must be taken separately before calling this
+ * API
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param reg_addr
+ *   32 bit PHY Register
+ * @param dev_type
+ *   Used to define device base address
+ * @param phy_data
+ *   Data to write to PHY register
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (IXGBE_ERR_PHY) If PHY read command failed
+ */
+int __rte_experimental
+rte_pmd_ixgbe_mdio_unlocked_write(uint16_t port, uint32_t reg_addr,
+				  uint32_t dev_type, uint16_t phy_data);
 
 /**
  * Response sent back to ixgbe driver from user app after callback
@@ -637,4 +708,17 @@ enum {
 	((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF &&  \
 	(x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM))
 
+/**
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param enable
+ *    0 to disable and nonzero to enable 'SBP' bit in FCTRL register
+ *    to receive all packets
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if *port* invalid.
+ *   - (-ENOTSUP) if hardware doesn't support this feature.
+ */
+int __rte_experimental
+rte_pmd_ixgbe_upd_fctrl_sbp(uint16_t port, int enable);
 #endif /* _PMD_IXGBE_H_ */