X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fixgbe%2Frte_pmd_ixgbe.h;h=90fc8160b1f81373dc896e286fb7d0c343df6af8;hb=b94d93ca7380328d07547addfe93a5c83e48a889;hp=22bc4c73e57b02e9082b2c774478267e79052f34;hpb=b35d309710fe45c1726843a8892406fc18ec8a5b;p=dpdk.git diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h index 22bc4c73e5..90fc8160b1 100644 --- a/drivers/net/ixgbe/rte_pmd_ixgbe.h +++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h @@ -1,33 +1,5 @@ -/*- - * BSD LICENSE - * - * Copyright (c) 2016 Intel Corporation. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2016 Intel Corporation */ /** @@ -39,7 +11,23 @@ #ifndef _PMD_IXGBE_H_ #define _PMD_IXGBE_H_ +#include #include +#include + +/** + * Notify VF when PF link status changes. + * + * @param port + * The port identifier of the Ethernet device. + * @param vf + * VF id. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if *vf* invalid. + */ +int rte_pmd_ixgbe_ping_vf(uint16_t port, uint16_t vf); /** * Set the VF MAC address. @@ -55,8 +43,8 @@ * - (-ENODEV) if *port* invalid. * - (-EINVAL) if *vf* or *mac_addr* is invalid. */ -int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf, - struct ether_addr *mac_addr); +int rte_pmd_ixgbe_set_vf_mac_addr(uint16_t port, uint16_t vf, + struct rte_ether_addr *mac_addr); /** * Enable/Disable VF VLAN anti spoofing. @@ -73,7 +61,8 @@ int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf, * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); +int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint16_t port, uint16_t vf, + uint8_t on); /** * Enable/Disable VF MAC anti spoofing. @@ -90,7 +79,7 @@ int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); +int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint16_t port, uint16_t vf, uint8_t on); /** * Enable/Disable vf vlan insert @@ -108,7 +97,7 @@ int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, +int rte_pmd_ixgbe_set_vf_vlan_insert(uint16_t port, uint16_t vf, uint16_t vlan_id); /** @@ -125,7 +114,7 @@ int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on); +int rte_pmd_ixgbe_set_tx_loopback(uint16_t port, uint8_t on); /** * set all queues drop enable bit @@ -141,7 +130,7 @@ int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on); * - (-ENODEV) if *port* invalid. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on); +int rte_pmd_ixgbe_set_all_queues_drop_en(uint16_t port, uint8_t on); /** * set drop enable bit in the VF split rx control register @@ -160,7 +149,7 @@ int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on); * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on); +int rte_pmd_ixgbe_set_vf_split_drop_en(uint16_t port, uint16_t vf, uint8_t on); /** * Enable/Disable vf vlan strip for all queues in a pool @@ -180,7 +169,7 @@ int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on); * - (-EINVAL) if bad parameter. */ int -rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on); +rte_pmd_ixgbe_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on); /** * Enable MACsec offload. @@ -198,7 +187,7 @@ rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on); * - (-ENODEV) if *port* invalid. * - (-ENOTSUP) if hardware doesn't support this feature. */ -int rte_pmd_ixgbe_macsec_enable(uint8_t port, uint8_t en, uint8_t rp); +int rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t rp); /** * Disable MACsec offload. @@ -210,7 +199,7 @@ int rte_pmd_ixgbe_macsec_enable(uint8_t port, uint8_t en, uint8_t rp); * - (-ENODEV) if *port* invalid. * - (-ENOTSUP) if hardware doesn't support this feature. */ -int rte_pmd_ixgbe_macsec_disable(uint8_t port); +int rte_pmd_ixgbe_macsec_disable(uint16_t port); /** * Configure Tx SC (Secure Connection). @@ -222,8 +211,9 @@ int rte_pmd_ixgbe_macsec_disable(uint8_t port); * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. */ -int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac); +int rte_pmd_ixgbe_macsec_config_txsc(uint16_t port, uint8_t *mac); /** * Configure Rx SC (Secure Connection). @@ -237,8 +227,9 @@ int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac); * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. */ -int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi); +int rte_pmd_ixgbe_macsec_config_rxsc(uint16_t port, uint8_t *mac, uint16_t pi); /** * Enable Tx SA (Secure Association). @@ -256,9 +247,10 @@ int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi); * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an, +int rte_pmd_ixgbe_macsec_select_txsa(uint16_t port, uint8_t idx, uint8_t an, uint32_t pn, uint8_t *key); /** @@ -277,11 +269,388 @@ int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an, * @return * - (0) if successful. * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. * - (-EINVAL) if bad parameter. */ -int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an, +int rte_pmd_ixgbe_macsec_select_rxsa(uint16_t port, uint8_t idx, uint8_t an, uint32_t pn, uint8_t *key); +/** +* Set RX L2 Filtering mode of a VF of an Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param rx_mask +* The RX mode mask, which is one or more of accepting Untagged Packets, +* packets that match the PFUTA table, Broadcast and Multicast Promiscuous. +* ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC, +* ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used +* in rx_mode. +* @param on +* 1 - Enable a VF RX mode. +* 0 - Disable a VF RX mode. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_rxmode(uint16_t port, uint16_t vf, uint16_t rx_mask, + uint8_t on); + +/** +* Enable or disable a VF traffic receive of an Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param on +* 1 - Enable a VF traffic receive. +* 0 - Disable a VF traffic receive. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_rx(uint16_t port, uint16_t vf, uint8_t on); + +/** +* Enable or disable a VF traffic transmit of the Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param on +* 1 - Enable a VF traffic transmit. +* 0 - Disable a VF traffic transmit. +* @return +* - (0) if successful. +* - (-ENODEV) if *port_id* invalid. +* - (-ENOTSUP) if hardware doesn't support. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_tx(uint16_t port, uint16_t vf, uint8_t on); + +/** +* Enable/Disable hardware VF VLAN filtering by an Ethernet device of +* received VLAN packets tagged with a given VLAN Tag Identifier. +* +* @param port +* The port identifier of the Ethernet device. +* @param vlan +* The VLAN Tag Identifier whose filtering must be enabled or disabled. +* @param vf_mask +* Bitmap listing which VFs participate in the VLAN filtering. +* @param vlan_on +* 1 - Enable VFs VLAN filtering. +* 0 - Disable VFs VLAN filtering. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_vlan_filter(uint16_t port, uint16_t vlan, + uint64_t vf_mask, uint8_t vlan_on); + +/** + * Set the rate limitation for a vf on an Ethernet device. + * + * @param port + * The port identifier of the Ethernet device. + * @param vf + * VF id. + * @param tx_rate + * The tx rate allocated from the total link speed for this VF id. + * @param q_msk + * The queue mask which need to set the rate. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_set_vf_rate_limit(uint16_t port, uint16_t vf, + uint16_t tx_rate, uint64_t q_msk); + +/** + * Set all the TCs' bandwidth weight. + * + * The bw_weight means the percentage occupied by the TC. + * It can be taken as the relative min bandwidth setting. + * + * @param port + * The port identifier of the Ethernet device. + * @param tc_num + * Number of TCs. + * @param bw_weight + * An array of relative bandwidth weight for all the TCs. + * The summary of the bw_weight should be 100. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if bad parameter. + * - (-ENOTSUP) not supported by firmware. + */ +int rte_pmd_ixgbe_set_tc_bw_alloc(uint16_t port, + uint8_t tc_num, + uint8_t *bw_weight); + + +/** + * Initialize bypass logic. This function needs to be called before + * executing any other bypass API. + * + * @param port + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_init(uint16_t port); + +/** + * Return bypass state. + * + * @param port + * The port identifier of the Ethernet device. + * @param state + * The return bypass state. + * - (1) Normal mode + * - (2) Bypass mode + * - (3) Isolate mode + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_state_show(uint16_t port, uint32_t *state); + +/** + * Set bypass state + * + * @param port + * The port identifier of the Ethernet device. + * @param new_state + * The current bypass state. + * - (1) Normal mode + * - (2) Bypass mode + * - (3) Isolate mode + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_state_set(uint16_t port, uint32_t *new_state); + +/** + * Return bypass state when given event occurs. + * + * @param port + * The port identifier of the Ethernet device. + * @param event + * The bypass event + * - (1) Main power on (power button is pushed) + * - (2) Auxiliary power on (power supply is being plugged) + * - (3) Main power off (system shutdown and power supply is left plugged in) + * - (4) Auxiliary power off (power supply is being unplugged) + * - (5) Display or set the watchdog timer + * @param state + * The bypass state when given event occurred. + * - (1) Normal mode + * - (2) Bypass mode + * - (3) Isolate mode + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_event_show(uint16_t port, + uint32_t event, + uint32_t *state); + +/** + * Set bypass state when given event occurs. + * + * @param port + * The port identifier of the Ethernet device. + * @param event + * The bypass event + * - (1) Main power on (power button is pushed) + * - (2) Auxiliary power on (power supply is being plugged) + * - (3) Main power off (system shutdown and power supply is left plugged in) + * - (4) Auxiliary power off (power supply is being unplugged) + * - (5) Display or set the watchdog timer + * @param state + * The assigned state when given event occurs. + * - (1) Normal mode + * - (2) Bypass mode + * - (3) Isolate mode + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_event_store(uint16_t port, + uint32_t event, + uint32_t state); + +/** + * Set bypass watchdog timeout count. + * + * @param port + * The port identifier of the Ethernet device. + * @param timeout + * The timeout to be set. + * - (0) 0 seconds (timer is off) + * - (1) 1.5 seconds + * - (2) 2 seconds + * - (3) 3 seconds + * - (4) 4 seconds + * - (5) 8 seconds + * - (6) 16 seconds + * - (7) 32 seconds + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_wd_timeout_store(uint16_t port, uint32_t timeout); + +/** + * Get bypass firmware version. + * + * @param port + * The port identifier of the Ethernet device. + * @param ver + * The firmware version + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_ver_show(uint16_t port, uint32_t *ver); + +/** + * Return bypass watchdog timeout in seconds + * + * @param port + * The port identifier of the Ethernet device. + * @param wd_timeout + * The return watchdog timeout. "0" represents timer expired + * - (0) 0 seconds (timer is off) + * - (1) 1.5 seconds + * - (2) 2 seconds + * - (3) 3 seconds + * - (4) 4 seconds + * - (5) 8 seconds + * - (6) 16 seconds + * - (7) 32 seconds + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout); + +/** + * Reset bypass watchdog timer + * + * @param port + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port); + +/** + * Acquire swfw semaphore lock for MDIO access + * + * @param port + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port* invalid. + * - (IXGBE_ERR_SWFW_SYNC) If sw/fw semaphore acquisition failed + */ +__rte_experimental +int +rte_pmd_ixgbe_mdio_lock(uint16_t port); + +/** + * Release swfw semaphore lock used for MDIO access + * + * @param port + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port* invalid. + */ +__rte_experimental +int +rte_pmd_ixgbe_mdio_unlock(uint16_t port); + +/** + * Read PHY register using MDIO without MDIO lock + * The lock must be taken separately before calling this + * API + * @param port + * The port identifier of the Ethernet device. + * @param reg_addr + * 32 bit PHY Register + * @param dev_type + * Used to define device base address + * @param phy_data + * Pointer for reading PHY register data + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port* invalid. + * - (IXGBE_ERR_PHY) If PHY read command failed + */ +__rte_experimental +int +rte_pmd_ixgbe_mdio_unlocked_read(uint16_t port, uint32_t reg_addr, + uint32_t dev_type, uint16_t *phy_data); + +/** + * Write data to PHY register using without MDIO lock + * The lock must be taken separately before calling this + * API + * + * @param port + * The port identifier of the Ethernet device. + * @param reg_addr + * 32 bit PHY Register + * @param dev_type + * Used to define device base address + * @param phy_data + * Data to write to PHY register + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port* invalid. + * - (IXGBE_ERR_PHY) If PHY read command failed + */ +__rte_experimental +int +rte_pmd_ixgbe_mdio_unlocked_write(uint16_t port, uint32_t reg_addr, + uint32_t dev_type, uint16_t phy_data); + /** * Response sent back to ixgbe driver from user app after callback */ @@ -301,4 +670,95 @@ struct rte_pmd_ixgbe_mb_event_param { uint16_t retval; /**< return value */ void *msg; /**< pointer to message */ }; +enum { + RTE_PMD_IXGBE_BYPASS_MODE_NONE, + RTE_PMD_IXGBE_BYPASS_MODE_NORMAL, + RTE_PMD_IXGBE_BYPASS_MODE_BYPASS, + RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE, + RTE_PMD_IXGBE_BYPASS_MODE_NUM, +}; + +#define RTE_PMD_IXGBE_BYPASS_MODE_VALID(x) \ + ((x) > RTE_PMD_IXGBE_BYPASS_MODE_NONE && \ + (x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM) + +enum { + RTE_PMD_IXGBE_BYPASS_EVENT_NONE, + RTE_PMD_IXGBE_BYPASS_EVENT_START, + RTE_PMD_IXGBE_BYPASS_EVENT_OS_ON = RTE_PMD_IXGBE_BYPASS_EVENT_START, + RTE_PMD_IXGBE_BYPASS_EVENT_POWER_ON, + RTE_PMD_IXGBE_BYPASS_EVENT_OS_OFF, + RTE_PMD_IXGBE_BYPASS_EVENT_POWER_OFF, + RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT, + RTE_PMD_IXGBE_BYPASS_EVENT_NUM +}; + +#define RTE_PMD_IXGBE_BYPASS_EVENT_VALID(x) \ + ((x) > RTE_PMD_IXGBE_BYPASS_EVENT_NONE && \ + (x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM) + +enum { + RTE_PMD_IXGBE_BYPASS_TMT_OFF, /* timeout disabled. */ + RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */ + RTE_PMD_IXGBE_BYPASS_TMT_NUM +}; + +#define RTE_PMD_IXGBE_BYPASS_TMT_VALID(x) \ + ((x) == RTE_PMD_IXGBE_BYPASS_TMT_OFF || \ + ((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF && \ + (x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM)) + +/** + * @param port + * The port identifier of the Ethernet device. + * @param enable + * 0 to disable and nonzero to enable 'SBP' bit in FCTRL register + * to receive all packets + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + */ +__rte_experimental +int +rte_pmd_ixgbe_upd_fctrl_sbp(uint16_t port, int enable); + +/** + * Get port fdir info + * + * @param port + * The port identifier of the Ethernet device. + * @param fdir_info + * The fdir info of the port + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if operation not supported. + */ +__rte_experimental +int +rte_pmd_ixgbe_get_fdir_info(uint16_t port, struct rte_eth_fdir_info *fdir_info); + +/** + * Get port fdir status + * + * @param port + * The port identifier of the Ethernet device. + * @param fdir_stats + * The fdir status of the port + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if operation not supported. + */ +__rte_experimental +int +rte_pmd_ixgbe_get_fdir_stats(uint16_t port, + struct rte_eth_fdir_stats *fdir_stats); #endif /* _PMD_IXGBE_H_ */