X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fliquidio%2Flio_struct.h;h=10e3976afd2342eca1649f0a537f0a72df21571b;hb=48191dde6acfbcc90849f20464178151a81ba4c8;hp=e8b6e1daf3e945ff449c29acf77251195562e149;hpb=e86d79d05abb1fd51127429563a1ce049f6f7ab0;p=dpdk.git diff --git a/drivers/net/liquidio/lio_struct.h b/drivers/net/liquidio/lio_struct.h index e8b6e1daf3..10e3976afd 100644 --- a/drivers/net/liquidio/lio_struct.h +++ b/drivers/net/liquidio/lio_struct.h @@ -43,6 +43,12 @@ #include "lio_hw_defs.h" +struct lio_stailq_node { + STAILQ_ENTRY(lio_stailq_node) entries; +}; + +STAILQ_HEAD(lio_stailq_head, lio_stailq_node); + struct lio_version { uint16_t major; uint16_t minor; @@ -50,12 +56,387 @@ struct lio_version { uint16_t reserved; }; -struct lio_device; +/** Input Queue statistics. Each input queue has four stats fields. */ +struct lio_iq_stats { + uint64_t instr_posted; /**< Instructions posted to this queue. */ + uint64_t instr_processed; /**< Instructions processed in this queue. */ + uint64_t instr_dropped; /**< Instructions that could not be processed */ + uint64_t bytes_sent; /**< Bytes sent through this queue. */ + uint64_t tx_done; /**< Num of packets sent to network. */ + uint64_t tx_iq_busy; /**< Num of times this iq was found to be full. */ + uint64_t tx_dropped; /**< Num of pkts dropped due to xmitpath errors. */ + uint64_t tx_tot_bytes; /**< Total count of bytes sent to network. */ +}; + +/** Output Queue statistics. Each output queue has four stats fields. */ +struct lio_droq_stats { + /** Number of packets received in this queue. */ + uint64_t pkts_received; + + /** Bytes received by this queue. */ + uint64_t bytes_received; + + /** Packets dropped due to no memory available. */ + uint64_t dropped_nomem; + + /** Packets dropped due to large number of pkts to process. */ + uint64_t dropped_toomany; + + /** Number of packets sent to stack from this queue. */ + uint64_t rx_pkts_received; + + /** Number of Bytes sent to stack from this queue. */ + uint64_t rx_bytes_received; + + /** Num of Packets dropped due to receive path failures. */ + uint64_t rx_dropped; + + /** Num of vxlan packets received; */ + uint64_t rx_vxlan; + + /** Num of failures of rte_pktmbuf_alloc() */ + uint64_t rx_alloc_failure; + +}; + +/** The Descriptor Ring Output Queue structure. + * This structure has all the information required to implement a + * DROQ. + */ +struct lio_droq { + /** A spinlock to protect access to this ring. */ + rte_spinlock_t lock; + + uint32_t q_no; + + uint32_t pkt_count; + + struct lio_device *lio_dev; + + /** The 8B aligned descriptor ring starts at this address. */ + struct lio_droq_desc *desc_ring; + + /** Index in the ring where the driver should read the next packet */ + uint32_t read_idx; + + /** Index in the ring where Octeon will write the next packet */ + uint32_t write_idx; + + /** Index in the ring where the driver will refill the descriptor's + * buffer + */ + uint32_t refill_idx; + + /** Packets pending to be processed */ + rte_atomic64_t pkts_pending; + + /** Number of descriptors in this ring. */ + uint32_t max_count; + + /** The number of descriptors pending refill. */ + uint32_t refill_count; + + uint32_t refill_threshold; + + /** The 8B aligned info ptrs begin from this address. */ + struct lio_droq_info *info_list; + + /** The receive buffer list. This list has the virtual addresses of the + * buffers. + */ + struct lio_recv_buffer *recv_buf_list; + + /** The size of each buffer pointed by the buffer pointer. */ + uint32_t buffer_size; + + /** Pointer to the mapped packet credit register. + * Host writes number of info/buffer ptrs available to this register + */ + void *pkts_credit_reg; + + /** Pointer to the mapped packet sent register. + * Octeon writes the number of packets DMA'ed to host memory + * in this register. + */ + void *pkts_sent_reg; + + /** Statistics for this DROQ. */ + struct lio_droq_stats stats; + + /** DMA mapped address of the DROQ descriptor ring. */ + size_t desc_ring_dma; + + /** Info ptr list are allocated at this virtual address. */ + size_t info_base_addr; + + /** DMA mapped address of the info list */ + size_t info_list_dma; + + /** Allocated size of info list. */ + uint32_t info_alloc_size; + + /** Memory zone **/ + const struct rte_memzone *desc_ring_mz; + const struct rte_memzone *info_mz; + struct rte_mempool *mpool; +}; + +/** Receive Header */ +union octeon_rh { +#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN + uint64_t rh64; + struct { + uint64_t opcode : 4; + uint64_t subcode : 8; + uint64_t len : 3; /** additional 64-bit words */ + uint64_t reserved : 17; + uint64_t ossp : 32; /** opcode/subcode specific parameters */ + } r; + struct { + uint64_t opcode : 4; + uint64_t subcode : 8; + uint64_t len : 3; /** additional 64-bit words */ + uint64_t extra : 28; + uint64_t vlan : 12; + uint64_t priority : 3; + uint64_t csum_verified : 3; /** checksum verified. */ + uint64_t has_hwtstamp : 1; /** Has hardware timestamp.1 = yes.*/ + uint64_t encap_on : 1; + uint64_t has_hash : 1; /** Has hash (rth or rss). 1 = yes. */ + } r_dh; + struct { + uint64_t opcode : 4; + uint64_t subcode : 8; + uint64_t len : 3; /** additional 64-bit words */ + uint64_t reserved : 8; + uint64_t extra : 25; + uint64_t gmxport : 16; + } r_nic_info; +#else + uint64_t rh64; + struct { + uint64_t ossp : 32; /** opcode/subcode specific parameters */ + uint64_t reserved : 17; + uint64_t len : 3; /** additional 64-bit words */ + uint64_t subcode : 8; + uint64_t opcode : 4; + } r; + struct { + uint64_t has_hash : 1; /** Has hash (rth or rss). 1 = yes. */ + uint64_t encap_on : 1; + uint64_t has_hwtstamp : 1; /** 1 = has hwtstamp */ + uint64_t csum_verified : 3; /** checksum verified. */ + uint64_t priority : 3; + uint64_t vlan : 12; + uint64_t extra : 28; + uint64_t len : 3; /** additional 64-bit words */ + uint64_t subcode : 8; + uint64_t opcode : 4; + } r_dh; + struct { + uint64_t gmxport : 16; + uint64_t extra : 25; + uint64_t reserved : 8; + uint64_t len : 3; /** additional 64-bit words */ + uint64_t subcode : 8; + uint64_t opcode : 4; + } r_nic_info; +#endif +}; + +#define OCTEON_RH_SIZE (sizeof(union octeon_rh)) + +/** The txpciq info passed to host from the firmware */ +union octeon_txpciq { + uint64_t txpciq64; + + struct { +#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN + uint64_t q_no : 8; + uint64_t port : 8; + uint64_t pkind : 6; + uint64_t use_qpg : 1; + uint64_t qpg : 11; + uint64_t aura_num : 10; + uint64_t reserved : 20; +#else + uint64_t reserved : 20; + uint64_t aura_num : 10; + uint64_t qpg : 11; + uint64_t use_qpg : 1; + uint64_t pkind : 6; + uint64_t port : 8; + uint64_t q_no : 8; +#endif + } s; +}; + +/** The instruction (input) queue. + * The input queue is used to post raw (instruction) mode data or packet + * data to Octeon device from the host. Each input queue for + * a LIO device has one such structure to represent it. + */ +struct lio_instr_queue { + /** A spinlock to protect access to the input ring. */ + rte_spinlock_t lock; + + rte_spinlock_t post_lock; + + struct lio_device *lio_dev; + + uint32_t pkt_in_done; + + rte_atomic64_t iq_flush_running; + + /** Flag that indicates if the queue uses 64 byte commands. */ + uint32_t iqcmd_64B:1; + + /** Queue info. */ + union octeon_txpciq txpciq; + + uint32_t rsvd:17; + + uint32_t status:8; + + /** Maximum no. of instructions in this queue. */ + uint32_t max_count; + + /** Index in input ring where the driver should write the next packet */ + uint32_t host_write_index; + + /** Index in input ring where Octeon is expected to read the next + * packet. + */ + uint32_t lio_read_index; + + /** This index aids in finding the window in the queue where Octeon + * has read the commands. + */ + uint32_t flush_index; + + /** This field keeps track of the instructions pending in this queue. */ + rte_atomic64_t instr_pending; + + /** Pointer to the Virtual Base addr of the input ring. */ + uint8_t *base_addr; + + struct lio_request_list *request_list; + + /** Octeon doorbell register for the ring. */ + void *doorbell_reg; + + /** Octeon instruction count register for this ring. */ + void *inst_cnt_reg; + + /** Number of instructions pending to be posted to Octeon. */ + uint32_t fill_cnt; + + /** Statistics for this input queue. */ + struct lio_iq_stats stats; + + /** DMA mapped base address of the input descriptor ring. */ + uint64_t base_addr_dma; + + /** Application context */ + void *app_ctx; + + /* network stack queue index */ + int q_index; + + /* Memory zone */ + const struct rte_memzone *iq_mz; +}; + +/** This structure is used by driver to store information required + * to free the mbuff when the packet has been fetched by Octeon. + * Bytes offset below assume worst-case of a 64-bit system. + */ +struct lio_buf_free_info { + /** Bytes 1-8. Pointer to network device private structure. */ + struct lio_device *lio_dev; + + /** Bytes 9-16. Pointer to mbuff. */ + struct rte_mbuf *mbuf; + + /** Bytes 17-24. Pointer to gather list. */ + struct lio_gather *g; + + /** Bytes 25-32. Physical address of mbuf->data or gather list. */ + uint64_t dptr; + + /** Bytes 33-47. Piggybacked soft command, if any */ + struct lio_soft_command *sc; + + /** Bytes 48-63. iq no */ + uint64_t iq_no; +}; + +/* The Scatter-Gather List Entry. The scatter or gather component used with + * input instruction has this format. + */ +struct lio_sg_entry { + /** The first 64 bit gives the size of data in each dptr. */ + union { + uint16_t size[4]; + uint64_t size64; + } u; + + /** The 4 dptr pointers for this entry. */ + uint64_t ptr[4]; +}; + +#define LIO_SG_ENTRY_SIZE (sizeof(struct lio_sg_entry)) + +/** Structure of a node in list of gather components maintained by + * driver for each network device. + */ +struct lio_gather { + /** List manipulation. Next and prev pointers. */ + struct lio_stailq_node list; + + /** Size of the gather component at sg in bytes. */ + int sg_size; + + /** Number of bytes that sg was adjusted to make it 8B-aligned. */ + int adjust; + + /** Gather component that can accommodate max sized fragment list + * received from the IP layer. + */ + struct lio_sg_entry *sg; +}; + +struct lio_rss_ctx { + uint16_t hash_key_size; + uint8_t hash_key[LIO_RSS_MAX_KEY_SZ]; + /* Ideally a factor of number of queues */ + uint8_t itable[LIO_RSS_MAX_TABLE_SZ]; + uint8_t itable_size; + uint8_t ip; + uint8_t tcp_hash; + uint8_t ipv6; + uint8_t ipv6_tcp_hash; + uint8_t ipv6_ex; + uint8_t ipv6_tcp_ex_hash; + uint8_t hash_disable; +}; + +struct lio_io_enable { + uint64_t iq; + uint64_t oq; + uint64_t iq64B; +}; + struct lio_fn_list { + void (*setup_iq_regs)(struct lio_device *, uint32_t); + void (*setup_oq_regs)(struct lio_device *, uint32_t); + int (*setup_mbox)(struct lio_device *); void (*free_mbox)(struct lio_device *); int (*setup_device_regs)(struct lio_device *); + int (*enable_io_queues)(struct lio_device *); + void (*disable_io_queues)(struct lio_device *); }; struct lio_pf_vf_hs_word { @@ -102,6 +483,17 @@ struct lio_sriov_info { uint32_t num_vfs; }; +/* Head of a response list */ +struct lio_response_list { + /** List structure to add delete pending entries to */ + struct lio_stailq_head head; + + /** A lock for this response list */ + rte_spinlock_t lock; + + rte_atomic64_t pending_req_count; +}; + /* Structure to define the configuration attributes for each Input queue. */ struct lio_iq_config { /* Max number of IQs available */ @@ -152,6 +544,75 @@ struct lio_config { int def_rx_buf_size; }; +/** Status of a RGMII Link on Octeon as seen by core driver. */ +union octeon_link_status { + uint64_t link_status64; + + struct { +#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN + uint64_t duplex : 8; + uint64_t mtu : 16; + uint64_t speed : 16; + uint64_t link_up : 1; + uint64_t autoneg : 1; + uint64_t if_mode : 5; + uint64_t pause : 1; + uint64_t flashing : 1; + uint64_t reserved : 15; +#else + uint64_t reserved : 15; + uint64_t flashing : 1; + uint64_t pause : 1; + uint64_t if_mode : 5; + uint64_t autoneg : 1; + uint64_t link_up : 1; + uint64_t speed : 16; + uint64_t mtu : 16; + uint64_t duplex : 8; +#endif + } s; +}; + +/** The rxpciq info passed to host from the firmware */ +union octeon_rxpciq { + uint64_t rxpciq64; + + struct { +#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN + uint64_t q_no : 8; + uint64_t reserved : 56; +#else + uint64_t reserved : 56; + uint64_t q_no : 8; +#endif + } s; +}; + +/** Information for a OCTEON ethernet interface shared between core & host. */ +struct octeon_link_info { + union octeon_link_status link; + uint64_t hw_addr; + +#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN + uint64_t gmxport : 16; + uint64_t macaddr_is_admin_assigned : 1; + uint64_t vlan_is_admin_assigned : 1; + uint64_t rsvd : 30; + uint64_t num_txpciq : 8; + uint64_t num_rxpciq : 8; +#else + uint64_t num_rxpciq : 8; + uint64_t num_txpciq : 8; + uint64_t rsvd : 30; + uint64_t vlan_is_admin_assigned : 1; + uint64_t macaddr_is_admin_assigned : 1; + uint64_t gmxport : 16; +#endif + + union octeon_txpciq txpciq[LIO_MAX_IOQS_PER_IF]; + union octeon_rxpciq rxpciq[LIO_MAX_IOQS_PER_IF]; +}; + /* ----------------------- THE LIO DEVICE --------------------------- */ /** The lio device. * Each lio device has this structure to represent all its @@ -166,10 +627,43 @@ struct lio_device { uint16_t pf_num; uint16_t vf_num; + /** This device's PCIe port used for traffic. */ + uint16_t pcie_port; + + /** The state of this device */ + rte_atomic64_t status; + + uint8_t intf_open; + + struct octeon_link_info linfo; + uint8_t *hw_addr; struct lio_fn_list fn_list; + uint32_t num_iqs; + + /** Guards each glist */ + rte_spinlock_t *glist_lock; + /** Array of gather component linked lists */ + struct lio_stailq_head *glist_head; + + /* The pool containing pre allocated buffers used for soft commands */ + struct rte_mempool *sc_buf_pool; + + /** The input instruction queues */ + struct lio_instr_queue *instr_queue[LIO_MAX_POSSIBLE_INSTR_QUEUES]; + + /** The singly-linked tail queues of instruction response */ + struct lio_response_list response_list; + + uint32_t num_oqs; + + /** The DROQ output queues */ + struct lio_droq *droq[LIO_MAX_POSSIBLE_OUTPUT_QUEUES]; + + struct lio_io_enable io_qmask; + struct lio_sriov_info sriov_info; struct lio_pf_vf_hs_word pfvf_hsword; @@ -183,11 +677,14 @@ struct lio_device { struct rte_eth_dev *eth_dev; + uint64_t ifflags; uint8_t max_rx_queues; uint8_t max_tx_queues; uint8_t nb_rx_queues; uint8_t nb_tx_queues; uint8_t port_configured; - uint8_t port_id; + struct lio_rss_ctx rss_state; + uint16_t port_id; + char firmware_version[LIO_FW_VERSION_LENGTH]; }; #endif /* _LIO_STRUCT_H_ */