X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fmlx5%2Fmlx5.c;h=a9cf988db14b0478e4d1bb189aaa9f6da69da35a;hb=a7d3c6271d55;hp=552344011008f3beef7005b9336308c67db45c8e;hpb=3ff4b0866fe22840994be631e552c9420204fc1e;p=dpdk.git diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index 5523440110..a9cf988db1 100644 --- a/drivers/net/mlx5/mlx5.c +++ b/drivers/net/mlx5/mlx5.c @@ -13,6 +13,7 @@ #include #include #include +#include #include /* Verbs header. */ @@ -36,6 +37,7 @@ #include #include #include +#include #include "mlx5.h" #include "mlx5_utils.h" @@ -44,6 +46,7 @@ #include "mlx5_defs.h" #include "mlx5_glue.h" #include "mlx5_mr.h" +#include "mlx5_flow.h" /* Device parameter to enable RX completion queue compression. */ #define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en" @@ -87,9 +90,15 @@ /* Allow L3 VXLAN flow creation. */ #define MLX5_L3_VXLAN_EN "l3_vxlan_en" +/* Activate DV flow steering. */ +#define MLX5_DV_FLOW_EN "dv_flow_en" + /* Activate Netlink support in VF mode. */ #define MLX5_VF_NL_EN "vf_nl_en" +/* Select port representors to instantiate. */ +#define MLX5_REPRESENTOR "representor" + #ifndef HAVE_IBV_MLX5_MOD_MPW #define MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED (1 << 2) #define MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW (1 << 3) @@ -237,6 +246,7 @@ mlx5_dev_close(struct rte_eth_dev *dev) /* In case mlx5_dev_stop() has not been called. */ mlx5_dev_interrupt_handler_uninstall(dev); mlx5_traffic_disable(dev); + mlx5_flow_flush(dev, NULL); /* Prevent crashes when queues are still in use. */ dev->rx_pkt_burst = removed_rx_burst; dev->tx_pkt_burst = removed_tx_burst; @@ -256,7 +266,6 @@ mlx5_dev_close(struct rte_eth_dev *dev) priv->txqs_n = 0; priv->txqs = NULL; } - mlx5_flow_delete_drop_queue(dev); mlx5_mprq_free_mp(dev); mlx5_mr_release(dev); if (priv->pd != NULL) { @@ -273,8 +282,12 @@ mlx5_dev_close(struct rte_eth_dev *dev) mlx5_socket_uninit(dev); if (priv->config.vf) mlx5_nl_mac_addr_flush(dev); - if (priv->nl_socket >= 0) - close(priv->nl_socket); + if (priv->nl_socket_route >= 0) + close(priv->nl_socket_route); + if (priv->nl_socket_rdma >= 0) + close(priv->nl_socket_rdma); + if (priv->tcf_context) + mlx5_flow_tcf_context_destroy(priv->tcf_context); ret = mlx5_hrxq_ibv_verify(dev); if (ret) DRV_LOG(WARNING, "port %u some hash Rx queue still remain", @@ -303,7 +316,27 @@ mlx5_dev_close(struct rte_eth_dev *dev) if (ret) DRV_LOG(WARNING, "port %u some flows still remain", dev->data->port_id); + if (priv->domain_id != RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) { + unsigned int c = 0; + unsigned int i = mlx5_dev_to_port_id(dev->device, NULL, 0); + uint16_t port_id[i]; + + i = RTE_MIN(mlx5_dev_to_port_id(dev->device, port_id, i), i); + while (i--) { + struct priv *opriv = + rte_eth_devices[port_id[i]].data->dev_private; + + if (!opriv || + opriv->domain_id != priv->domain_id || + &rte_eth_devices[port_id[i]] == dev) + continue; + ++c; + } + if (!c) + claim_zero(rte_eth_switch_domain_free(priv->domain_id)); + } memset(priv, 0, sizeof(*priv)); + priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID; } const struct eth_dev_ops mlx5_dev_ops = { @@ -370,6 +403,10 @@ const struct eth_dev_ops mlx5_dev_ops_isolate = { .dev_set_link_down = mlx5_set_link_down, .dev_set_link_up = mlx5_set_link_up, .dev_close = mlx5_dev_close, + .promiscuous_enable = mlx5_promiscuous_enable, + .promiscuous_disable = mlx5_promiscuous_disable, + .allmulticast_enable = mlx5_allmulticast_enable, + .allmulticast_disable = mlx5_allmulticast_disable, .link_update = mlx5_link_update, .stats_get = mlx5_stats_get, .stats_reset = mlx5_stats_reset, @@ -419,6 +456,9 @@ mlx5_args_check(const char *key, const char *val, void *opaque) struct mlx5_dev_config *config = opaque; unsigned long tmp; + /* No-op, port representors are processed in mlx5_dev_spawn(). */ + if (!strcmp(MLX5_REPRESENTOR, key)) + return 0; errno = 0; tmp = strtoul(val, NULL, 0); if (errno) { @@ -441,7 +481,7 @@ mlx5_args_check(const char *key, const char *val, void *opaque) } else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) { config->txqs_inline = tmp; } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) { - config->mps = !!tmp ? config->mps : 0; + config->mps = !!tmp; } else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) { config->mpw_hdr_dseg = !!tmp; } else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) { @@ -454,6 +494,8 @@ mlx5_args_check(const char *key, const char *val, void *opaque) config->l3_vxlan_en = !!tmp; } else if (strcmp(MLX5_VF_NL_EN, key) == 0) { config->vf_nl_en = !!tmp; + } else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) { + config->dv_flow_en = !!tmp; } else { DRV_LOG(WARNING, "%s: unknown parameter", key); rte_errno = EINVAL; @@ -491,6 +533,8 @@ mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs) MLX5_RX_VEC_EN, MLX5_L3_VXLAN_EN, MLX5_VF_NL_EN, + MLX5_DV_FLOW_EN, + MLX5_REPRESENTOR, NULL, }; struct rte_kvargs *kvlist; @@ -531,11 +575,13 @@ static struct rte_pci_driver mlx5_driver; static void *uar_base; static int -find_lower_va_bound(const struct rte_memseg_list *msl __rte_unused, +find_lower_va_bound(const struct rte_memseg_list *msl, const struct rte_memseg *ms, void *arg) { void **addr = arg; + if (msl->external) + return 0; if (*addr == NULL) *addr = ms->addr; else @@ -567,7 +613,7 @@ mlx5_uar_init_primary(struct rte_eth_dev *dev) rte_memseg_walk(find_lower_va_bound, &addr); /* keep distance to hugepages to minimize potential conflicts. */ - addr = RTE_PTR_SUB(addr, MLX5_UAR_OFFSET + MLX5_UAR_SIZE); + addr = RTE_PTR_SUB(addr, (uintptr_t)(MLX5_UAR_OFFSET + MLX5_UAR_SIZE)); /* anonymous mmap, no real memory consumption. */ addr = mmap(addr, MLX5_UAR_SIZE, PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); @@ -635,106 +681,100 @@ mlx5_uar_init_secondary(struct rte_eth_dev *dev) } /** - * DPDK callback to register a PCI device. + * Spawn an Ethernet device from Verbs information. * - * This function creates an Ethernet device for each port of a given - * PCI device. - * - * @param[in] pci_drv - * PCI driver structure (mlx5_driver). - * @param[in] pci_dev - * PCI device information. + * @param dpdk_dev + * Backing DPDK device. + * @param ibv_dev + * Verbs device. + * @param vf + * If nonzero, enable VF-specific features. + * @param[in] switch_info + * Switch properties of Ethernet device. * * @return - * 0 on success, a negative errno value otherwise and rte_errno is set. + * A valid Ethernet device object on success, NULL otherwise and rte_errno + * is set. The following error is defined: + * + * EBUSY: device is not supposed to be spawned. */ -static int -mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, - struct rte_pci_device *pci_dev) +static struct rte_eth_dev * +mlx5_dev_spawn(struct rte_device *dpdk_dev, + struct ibv_device *ibv_dev, + int vf, + const struct mlx5_switch_info *switch_info) { - struct ibv_device **list = NULL; - struct ibv_device *ibv_dev; - struct ibv_context *ctx = NULL; + struct ibv_context *ctx; struct ibv_device_attr_ex attr; + struct ibv_port_attr port_attr; + struct ibv_pd *pd = NULL; struct mlx5dv_context dv_attr = { .comp_mask = 0 }; + struct mlx5_dev_config config = { + .vf = !!vf, + .mps = MLX5_ARG_UNSET, + .tx_vec_en = 1, + .rx_vec_en = 1, + .mpw_hdr_dseg = 0, + .txq_inline = MLX5_ARG_UNSET, + .txqs_inline = MLX5_ARG_UNSET, + .inline_max_packet_sz = MLX5_ARG_UNSET, + .vf_nl_en = 1, + .mprq = { + .enabled = 0, + .stride_num_n = MLX5_MPRQ_STRIDE_NUM_N, + .max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN, + .min_rxqs_num = MLX5_MPRQ_MIN_RXQS, + }, + }; + struct rte_eth_dev *eth_dev = NULL; + struct priv *priv = NULL; int err = 0; - unsigned int vf = 0; unsigned int mps; unsigned int cqe_comp; unsigned int tunnel_en = 0; unsigned int mpls_en = 0; unsigned int swp = 0; - unsigned int verb_priorities = 0; unsigned int mprq = 0; unsigned int mprq_min_stride_size_n = 0; unsigned int mprq_max_stride_size_n = 0; unsigned int mprq_min_stride_num_n = 0; unsigned int mprq_max_stride_num_n = 0; - int i; #ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT struct ibv_counter_set_description cs_desc = { .counter_type = 0 }; #endif + struct ether_addr mac; + char name[RTE_ETH_NAME_MAX_LEN]; + int own_domain_id = 0; + unsigned int i; - /* Prepare shared data between primary and secondary process. */ - mlx5_prepare_shared_data(); - assert(pci_drv == &mlx5_driver); - list = mlx5_glue->get_device_list(&i); - if (list == NULL) { - assert(errno); - err = errno; - if (errno == ENOSYS) - DRV_LOG(ERR, - "cannot list devices, is ib_uverbs loaded?"); - goto error; - } - assert(i >= 0); - /* - * For each listed device, check related sysfs entry against - * the provided PCI ID. - */ - while (i != 0) { - struct rte_pci_addr pci_addr; + /* Determine if this port representor is supposed to be spawned. */ + if (switch_info->representor && dpdk_dev->devargs) { + struct rte_eth_devargs eth_da; - --i; - DRV_LOG(DEBUG, "checking device \"%s\"", list[i]->name); - if (mlx5_ibv_device_to_pci_addr(list[i], &pci_addr)) - continue; - if ((pci_dev->addr.domain != pci_addr.domain) || - (pci_dev->addr.bus != pci_addr.bus) || - (pci_dev->addr.devid != pci_addr.devid) || - (pci_dev->addr.function != pci_addr.function)) - continue; - DRV_LOG(INFO, "PCI information matches, using device \"%s\"", - list[i]->name); - vf = ((pci_dev->id.device_id == - PCI_DEVICE_ID_MELLANOX_CONNECTX4VF) || - (pci_dev->id.device_id == - PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF) || - (pci_dev->id.device_id == - PCI_DEVICE_ID_MELLANOX_CONNECTX5VF) || - (pci_dev->id.device_id == - PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)); - ctx = mlx5_glue->open_device(list[i]); - rte_errno = errno; - err = rte_errno; - break; - } - if (ctx == NULL) { - switch (err) { - case 0: - DRV_LOG(ERR, - "cannot access device, is mlx5_ib loaded?"); - err = ENODEV; - break; - case EINVAL: - DRV_LOG(ERR, - "cannot use device, are drivers up to date?"); - break; + err = rte_eth_devargs_parse(dpdk_dev->devargs->args, ð_da); + if (err) { + rte_errno = -err; + DRV_LOG(ERR, "failed to process device arguments: %s", + strerror(rte_errno)); + return NULL; } - goto error; + for (i = 0; i < eth_da.nb_representor_ports; ++i) + if (eth_da.representor_ports[i] == + (uint16_t)switch_info->port_name) + break; + if (i == eth_da.nb_representor_ports) { + rte_errno = EBUSY; + return NULL; + } + } + /* Prepare shared data between primary and secondary process. */ + mlx5_prepare_shared_data(); + errno = 0; + ctx = mlx5_glue->open_device(ibv_dev); + if (!ctx) { + rte_errno = errno ? errno : ENODEV; + return NULL; } - ibv_dev = list[i]; - DRV_LOG(DEBUG, "device opened"); #ifdef HAVE_IBV_MLX5_MOD_SWP dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_SWP; #endif @@ -766,6 +806,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, swp = dv_attr.sw_parsing_caps.sw_parsing_offloads; DRV_LOG(DEBUG, "SWP support: %u", swp); #endif + config.swp = !!swp; #ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_STRIDING_RQ) { struct mlx5dv_striding_rq_caps mprq_caps = @@ -791,6 +832,8 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, mprq_caps.min_single_wqe_log_num_of_strides; mprq_max_stride_num_n = mprq_caps.max_single_wqe_log_num_of_strides; + config.mprq.stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N, + mprq_min_stride_num_n); } #endif if (RTE_CACHE_LINE_SIZE == 128 && @@ -798,6 +841,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, cqe_comp = 0; else cqe_comp = 1; + config.cqe_comp = cqe_comp; #ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) { tunnel_en = ((dv_attr.tunnel_offloads_caps & @@ -811,6 +855,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, DRV_LOG(WARNING, "tunnel offloading disabled due to old OFED/rdma-core version"); #endif + config.tunnel_en = tunnel_en; #ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT mpls_en = ((dv_attr.tunnel_offloads_caps & MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_GRE) && @@ -822,378 +867,603 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, DRV_LOG(WARNING, "MPLS over GRE/UDP tunnel offloading disabled due to" " old OFED/rdma-core version or firmware configuration"); #endif + config.mpls_en = mpls_en; err = mlx5_glue->query_device_ex(ctx, NULL, &attr); if (err) { DEBUG("ibv_query_device_ex() failed"); goto error; } - DRV_LOG(INFO, "%u port(s) detected", attr.orig_attr.phys_port_cnt); - for (i = 0; i < attr.orig_attr.phys_port_cnt; i++) { - char name[RTE_ETH_NAME_MAX_LEN]; - int len; - uint32_t port = i + 1; /* ports are indexed from one */ - struct ibv_port_attr port_attr; - struct ibv_pd *pd = NULL; - struct priv *priv = NULL; - struct rte_eth_dev *eth_dev = NULL; - struct ether_addr mac; - struct mlx5_dev_config config = { - .cqe_comp = cqe_comp, - .mps = mps, - .tunnel_en = tunnel_en, - .mpls_en = mpls_en, - .tx_vec_en = 1, - .rx_vec_en = 1, - .mpw_hdr_dseg = 0, - .txq_inline = MLX5_ARG_UNSET, - .txqs_inline = MLX5_ARG_UNSET, - .inline_max_packet_sz = MLX5_ARG_UNSET, - .vf_nl_en = 1, - .swp = !!swp, - .mprq = { - .enabled = 0, /* Disabled by default. */ - .stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N, - mprq_min_stride_num_n), - .max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN, - .min_rxqs_num = MLX5_MPRQ_MIN_RXQS, - }, - }; - - len = snprintf(name, sizeof(name), PCI_PRI_FMT, - pci_dev->addr.domain, pci_dev->addr.bus, - pci_dev->addr.devid, pci_dev->addr.function); - if (attr.orig_attr.phys_port_cnt > 1) - snprintf(name + len, sizeof(name), " port %u", i); - if (rte_eal_process_type() == RTE_PROC_SECONDARY) { - eth_dev = rte_eth_dev_attach_secondary(name); - if (eth_dev == NULL) { - DRV_LOG(ERR, "can not attach rte ethdev"); - rte_errno = ENOMEM; - err = rte_errno; - goto error; - } - eth_dev->device = &pci_dev->device; - eth_dev->dev_ops = &mlx5_dev_sec_ops; - err = mlx5_uar_init_secondary(eth_dev); - if (err) { - err = rte_errno; - goto error; - } - /* Receive command fd from primary process */ - err = mlx5_socket_connect(eth_dev); - if (err < 0) { - err = rte_errno; - goto error; - } - /* Remap UAR for Tx queues. */ - err = mlx5_tx_uar_remap(eth_dev, err); - if (err) { - err = rte_errno; - goto error; - } - /* - * Ethdev pointer is still required as input since - * the primary device is not accessible from the - * secondary process. - */ - eth_dev->rx_pkt_burst = - mlx5_select_rx_function(eth_dev); - eth_dev->tx_pkt_burst = - mlx5_select_tx_function(eth_dev); - rte_eth_dev_probing_finish(eth_dev); - continue; - } - DRV_LOG(DEBUG, "using port %u", port); - if (!ctx) - ctx = mlx5_glue->open_device(ibv_dev); - if (ctx == NULL) { - err = ENODEV; - goto port_error; + if (!switch_info->representor) + rte_strlcpy(name, dpdk_dev->name, sizeof(name)); + else + snprintf(name, sizeof(name), "%s_representor_%u", + dpdk_dev->name, switch_info->port_name); + DRV_LOG(DEBUG, "naming Ethernet device \"%s\"", name); + if (rte_eal_process_type() == RTE_PROC_SECONDARY) { + eth_dev = rte_eth_dev_attach_secondary(name); + if (eth_dev == NULL) { + DRV_LOG(ERR, "can not attach rte ethdev"); + rte_errno = ENOMEM; + err = rte_errno; + goto error; } - /* Check port status. */ - err = mlx5_glue->query_port(ctx, port, &port_attr); + eth_dev->device = dpdk_dev; + eth_dev->dev_ops = &mlx5_dev_sec_ops; + err = mlx5_uar_init_secondary(eth_dev); if (err) { - DRV_LOG(ERR, "port query failed: %s", strerror(err)); - goto port_error; + err = rte_errno; + goto error; } - if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) { - DRV_LOG(ERR, - "port %d is not configured in Ethernet mode", - port); - err = EINVAL; - goto port_error; + /* Receive command fd from primary process */ + err = mlx5_socket_connect(eth_dev); + if (err < 0) { + err = rte_errno; + goto error; } - if (port_attr.state != IBV_PORT_ACTIVE) - DRV_LOG(DEBUG, "port %d is not active: \"%s\" (%d)", - port, - mlx5_glue->port_state_str(port_attr.state), - port_attr.state); - /* Allocate protection domain. */ - pd = mlx5_glue->alloc_pd(ctx); - if (pd == NULL) { - DRV_LOG(ERR, "PD allocation failure"); - err = ENOMEM; - goto port_error; + /* Remap UAR for Tx queues. */ + err = mlx5_tx_uar_remap(eth_dev, err); + if (err) { + err = rte_errno; + goto error; } - /* from rte_ethdev.c */ - priv = rte_zmalloc("ethdev private structure", - sizeof(*priv), - RTE_CACHE_LINE_SIZE); - if (priv == NULL) { - DRV_LOG(ERR, "priv allocation failure"); - err = ENOMEM; - goto port_error; + /* + * Ethdev pointer is still required as input since + * the primary device is not accessible from the + * secondary process. + */ + eth_dev->rx_pkt_burst = mlx5_select_rx_function(eth_dev); + eth_dev->tx_pkt_burst = mlx5_select_tx_function(eth_dev); + claim_zero(mlx5_glue->close_device(ctx)); + return eth_dev; + } + /* Check port status. */ + err = mlx5_glue->query_port(ctx, 1, &port_attr); + if (err) { + DRV_LOG(ERR, "port query failed: %s", strerror(err)); + goto error; + } + if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) { + DRV_LOG(ERR, "port is not configured in Ethernet mode"); + err = EINVAL; + goto error; + } + if (port_attr.state != IBV_PORT_ACTIVE) + DRV_LOG(DEBUG, "port is not active: \"%s\" (%d)", + mlx5_glue->port_state_str(port_attr.state), + port_attr.state); + /* Allocate protection domain. */ + pd = mlx5_glue->alloc_pd(ctx); + if (pd == NULL) { + DRV_LOG(ERR, "PD allocation failure"); + err = ENOMEM; + goto error; + } + priv = rte_zmalloc("ethdev private structure", + sizeof(*priv), + RTE_CACHE_LINE_SIZE); + if (priv == NULL) { + DRV_LOG(ERR, "priv allocation failure"); + err = ENOMEM; + goto error; + } + priv->ctx = ctx; + strncpy(priv->ibdev_name, priv->ctx->device->name, + sizeof(priv->ibdev_name)); + strncpy(priv->ibdev_path, priv->ctx->device->ibdev_path, + sizeof(priv->ibdev_path)); + priv->device_attr = attr; + priv->pd = pd; + priv->mtu = ETHER_MTU; +#ifndef RTE_ARCH_64 + /* Initialize UAR access locks for 32bit implementations. */ + rte_spinlock_init(&priv->uar_lock_cq); + for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++) + rte_spinlock_init(&priv->uar_lock[i]); +#endif + /* Some internal functions rely on Netlink sockets, open them now. */ + priv->nl_socket_rdma = mlx5_nl_init(NETLINK_RDMA); + priv->nl_socket_route = mlx5_nl_init(NETLINK_ROUTE); + priv->nl_sn = 0; + priv->representor = !!switch_info->representor; + priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID; + priv->representor_id = + switch_info->representor ? switch_info->port_name : -1; + /* + * Look for sibling devices in order to reuse their switch domain + * if any, otherwise allocate one. + */ + i = mlx5_dev_to_port_id(dpdk_dev, NULL, 0); + if (i > 0) { + uint16_t port_id[i]; + + i = RTE_MIN(mlx5_dev_to_port_id(dpdk_dev, port_id, i), i); + while (i--) { + const struct priv *opriv = + rte_eth_devices[port_id[i]].data->dev_private; + + if (!opriv || + opriv->domain_id == + RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) + continue; + priv->domain_id = opriv->domain_id; + break; } - priv->ctx = ctx; - strncpy(priv->ibdev_path, priv->ctx->device->ibdev_path, - sizeof(priv->ibdev_path)); - priv->device_attr = attr; - priv->port = port; - priv->pd = pd; - priv->mtu = ETHER_MTU; - err = mlx5_args(&config, pci_dev->device.devargs); + } + if (priv->domain_id == RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) { + err = rte_eth_switch_domain_alloc(&priv->domain_id); if (err) { err = rte_errno; - DRV_LOG(ERR, "failed to process device arguments: %s", + DRV_LOG(ERR, "unable to allocate switch domain: %s", strerror(rte_errno)); - goto port_error; + goto error; } - config.hw_csum = !!(attr.device_cap_flags_ex & - IBV_DEVICE_RAW_IP_CSUM); - DRV_LOG(DEBUG, "checksum offloading is %ssupported", - (config.hw_csum ? "" : "not ")); + own_domain_id = 1; + } + err = mlx5_args(&config, dpdk_dev->devargs); + if (err) { + err = rte_errno; + DRV_LOG(ERR, "failed to process device arguments: %s", + strerror(rte_errno)); + goto error; + } + config.hw_csum = !!(attr.device_cap_flags_ex & IBV_DEVICE_RAW_IP_CSUM); + DRV_LOG(DEBUG, "checksum offloading is %ssupported", + (config.hw_csum ? "" : "not ")); #ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT - config.flow_counter_en = !!attr.max_counter_sets; - mlx5_glue->describe_counter_set(ctx, 0, &cs_desc); - DRV_LOG(DEBUG, - "counter type = %d, num of cs = %ld, attributes = %d", - cs_desc.counter_type, cs_desc.num_of_cs, - cs_desc.attributes); + config.flow_counter_en = !!attr.max_counter_sets; + mlx5_glue->describe_counter_set(ctx, 0, &cs_desc); + DRV_LOG(DEBUG, "counter type = %d, num of cs = %ld, attributes = %d", + cs_desc.counter_type, cs_desc.num_of_cs, + cs_desc.attributes); #endif - config.ind_table_max_size = - attr.rss_caps.max_rwq_indirection_table_size; - /* Remove this check once DPDK supports larger/variable - * indirection tables. */ - if (config.ind_table_max_size > - (unsigned int)ETH_RSS_RETA_SIZE_512) - config.ind_table_max_size = ETH_RSS_RETA_SIZE_512; - DRV_LOG(DEBUG, "maximum Rx indirection table size is %u", - config.ind_table_max_size); - config.hw_vlan_strip = !!(attr.raw_packet_caps & - IBV_RAW_PACKET_CAP_CVLAN_STRIPPING); - DRV_LOG(DEBUG, "VLAN stripping is %ssupported", - (config.hw_vlan_strip ? "" : "not ")); - - config.hw_fcs_strip = !!(attr.raw_packet_caps & - IBV_RAW_PACKET_CAP_SCATTER_FCS); - DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported", - (config.hw_fcs_strip ? "" : "not ")); - + config.ind_table_max_size = + attr.rss_caps.max_rwq_indirection_table_size; + /* + * Remove this check once DPDK supports larger/variable + * indirection tables. + */ + if (config.ind_table_max_size > (unsigned int)ETH_RSS_RETA_SIZE_512) + config.ind_table_max_size = ETH_RSS_RETA_SIZE_512; + DRV_LOG(DEBUG, "maximum Rx indirection table size is %u", + config.ind_table_max_size); + config.hw_vlan_strip = !!(attr.raw_packet_caps & + IBV_RAW_PACKET_CAP_CVLAN_STRIPPING); + DRV_LOG(DEBUG, "VLAN stripping is %ssupported", + (config.hw_vlan_strip ? "" : "not ")); + config.hw_fcs_strip = !!(attr.raw_packet_caps & + IBV_RAW_PACKET_CAP_SCATTER_FCS); + DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported", + (config.hw_fcs_strip ? "" : "not ")); #ifdef HAVE_IBV_WQ_FLAG_RX_END_PADDING - config.hw_padding = !!attr.rx_pad_end_addr_align; + config.hw_padding = !!attr.rx_pad_end_addr_align; #endif - DRV_LOG(DEBUG, - "hardware Rx end alignment padding is %ssupported", - (config.hw_padding ? "" : "not ")); - config.vf = vf; - config.tso = (attr.tso_caps.max_tso > 0 && - (attr.tso_caps.supported_qpts & - (1 << IBV_QPT_RAW_PACKET))); - if (config.tso) - config.tso_max_payload_sz = attr.tso_caps.max_tso; - if (config.mps && !mps) { - DRV_LOG(ERR, - "multi-packet send not supported on this device" - " (" MLX5_TXQ_MPW_EN ")"); - err = ENOTSUP; - goto port_error; - } - DRV_LOG(INFO, "%s MPS is %s", - config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "", - config.mps != MLX5_MPW_DISABLED ? "enabled" : - "disabled"); - if (config.cqe_comp && !cqe_comp) { - DRV_LOG(WARNING, "Rx CQE compression isn't supported"); - config.cqe_comp = 0; - } - if (config.mprq.enabled && mprq) { - if (config.mprq.stride_num_n > mprq_max_stride_num_n || - config.mprq.stride_num_n < mprq_min_stride_num_n) { - config.mprq.stride_num_n = - RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N, - mprq_min_stride_num_n); - DRV_LOG(WARNING, - "the number of strides" - " for Multi-Packet RQ is out of range," - " setting default value (%u)", - 1 << config.mprq.stride_num_n); - } - config.mprq.min_stride_size_n = mprq_min_stride_size_n; - config.mprq.max_stride_size_n = mprq_max_stride_size_n; - } else if (config.mprq.enabled && !mprq) { - DRV_LOG(WARNING, "Multi-Packet RQ isn't supported"); - config.mprq.enabled = 0; - } - eth_dev = rte_eth_dev_allocate(name); - if (eth_dev == NULL) { - DRV_LOG(ERR, "can not allocate rte ethdev"); - err = ENOMEM; - goto port_error; - } - eth_dev->data->dev_private = priv; - priv->dev_data = eth_dev->data; - eth_dev->data->mac_addrs = priv->mac; - eth_dev->device = &pci_dev->device; - rte_eth_copy_pci_info(eth_dev, pci_dev); - eth_dev->device->driver = &mlx5_driver.driver; - err = mlx5_uar_init_primary(eth_dev); - if (err) { - err = rte_errno; - goto port_error; - } - /* Configure the first MAC address by default. */ - if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) { - DRV_LOG(ERR, - "port %u cannot get MAC address, is mlx5_en" - " loaded? (errno: %s)", - eth_dev->data->port_id, strerror(rte_errno)); - err = ENODEV; - goto port_error; + DRV_LOG(DEBUG, "hardware Rx end alignment padding is %ssupported", + (config.hw_padding ? "" : "not ")); + config.tso = (attr.tso_caps.max_tso > 0 && + (attr.tso_caps.supported_qpts & + (1 << IBV_QPT_RAW_PACKET))); + if (config.tso) + config.tso_max_payload_sz = attr.tso_caps.max_tso; + /* + * MPW is disabled by default, while the Enhanced MPW is enabled + * by default. + */ + if (config.mps == MLX5_ARG_UNSET) + config.mps = (mps == MLX5_MPW_ENHANCED) ? MLX5_MPW_ENHANCED : + MLX5_MPW_DISABLED; + else + config.mps = config.mps ? mps : MLX5_MPW_DISABLED; + DRV_LOG(INFO, "%sMPS is %s", + config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "", + config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled"); + if (config.cqe_comp && !cqe_comp) { + DRV_LOG(WARNING, "Rx CQE compression isn't supported"); + config.cqe_comp = 0; + } + if (config.mprq.enabled && mprq) { + if (config.mprq.stride_num_n > mprq_max_stride_num_n || + config.mprq.stride_num_n < mprq_min_stride_num_n) { + config.mprq.stride_num_n = + RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N, + mprq_min_stride_num_n); + DRV_LOG(WARNING, + "the number of strides" + " for Multi-Packet RQ is out of range," + " setting default value (%u)", + 1 << config.mprq.stride_num_n); } - DRV_LOG(INFO, - "port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x", - eth_dev->data->port_id, - mac.addr_bytes[0], mac.addr_bytes[1], - mac.addr_bytes[2], mac.addr_bytes[3], - mac.addr_bytes[4], mac.addr_bytes[5]); + config.mprq.min_stride_size_n = mprq_min_stride_size_n; + config.mprq.max_stride_size_n = mprq_max_stride_size_n; + } else if (config.mprq.enabled && !mprq) { + DRV_LOG(WARNING, "Multi-Packet RQ isn't supported"); + config.mprq.enabled = 0; + } + eth_dev = rte_eth_dev_allocate(name); + if (eth_dev == NULL) { + DRV_LOG(ERR, "can not allocate rte ethdev"); + err = ENOMEM; + goto error; + } + if (priv->representor) { + eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR; + eth_dev->data->representor_id = priv->representor_id; + } + eth_dev->data->dev_private = priv; + priv->dev_data = eth_dev->data; + eth_dev->data->mac_addrs = priv->mac; + eth_dev->device = dpdk_dev; + err = mlx5_uar_init_primary(eth_dev); + if (err) { + err = rte_errno; + goto error; + } + /* Configure the first MAC address by default. */ + if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) { + DRV_LOG(ERR, + "port %u cannot get MAC address, is mlx5_en" + " loaded? (errno: %s)", + eth_dev->data->port_id, strerror(rte_errno)); + err = ENODEV; + goto error; + } + DRV_LOG(INFO, + "port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x", + eth_dev->data->port_id, + mac.addr_bytes[0], mac.addr_bytes[1], + mac.addr_bytes[2], mac.addr_bytes[3], + mac.addr_bytes[4], mac.addr_bytes[5]); #ifndef NDEBUG - { - char ifname[IF_NAMESIZE]; - - if (mlx5_get_ifname(eth_dev, &ifname) == 0) - DRV_LOG(DEBUG, "port %u ifname is \"%s\"", - eth_dev->data->port_id, ifname); - else - DRV_LOG(DEBUG, "port %u ifname is unknown", - eth_dev->data->port_id); - } + { + char ifname[IF_NAMESIZE]; + + if (mlx5_get_ifname(eth_dev, &ifname) == 0) + DRV_LOG(DEBUG, "port %u ifname is \"%s\"", + eth_dev->data->port_id, ifname); + else + DRV_LOG(DEBUG, "port %u ifname is unknown", + eth_dev->data->port_id); + } #endif - /* Get actual MTU if possible. */ - err = mlx5_get_mtu(eth_dev, &priv->mtu); - if (err) { - err = rte_errno; - goto port_error; - } - DRV_LOG(DEBUG, "port %u MTU is %u", eth_dev->data->port_id, - priv->mtu); - /* - * Initialize burst functions to prevent crashes before link-up. - */ - eth_dev->rx_pkt_burst = removed_rx_burst; - eth_dev->tx_pkt_burst = removed_tx_burst; - eth_dev->dev_ops = &mlx5_dev_ops; - /* Register MAC address. */ - claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0)); - priv->nl_socket = -1; - priv->nl_sn = 0; - if (vf && config.vf_nl_en) { - priv->nl_socket = mlx5_nl_init(RTMGRP_LINK); - if (priv->nl_socket < 0) - priv->nl_socket = -1; - mlx5_nl_mac_addr_sync(eth_dev); - } - TAILQ_INIT(&priv->flows); - TAILQ_INIT(&priv->ctrl_flows); - /* Hint libmlx5 to use PMD allocator for data plane resources */ - struct mlx5dv_ctx_allocators alctr = { - .alloc = &mlx5_alloc_verbs_buf, - .free = &mlx5_free_verbs_buf, - .data = priv, - }; - mlx5_glue->dv_set_context_attr(ctx, - MLX5DV_CTX_ATTR_BUF_ALLOCATORS, - (void *)((uintptr_t)&alctr)); - /* Bring Ethernet device up. */ - DRV_LOG(DEBUG, "port %u forcing Ethernet interface up", - eth_dev->data->port_id); - mlx5_set_link_up(eth_dev); - /* - * Even though the interrupt handler is not installed yet, - * interrupts will still trigger on the asyn_fd from - * Verbs context returned by ibv_open_device(). - */ - mlx5_link_update(eth_dev, 0); - /* Store device configuration on private structure. */ - priv->config = config; - /* Create drop queue. */ - err = mlx5_flow_create_drop_queue(eth_dev); - if (err) { - DRV_LOG(ERR, "port %u drop queue allocation failed: %s", - eth_dev->data->port_id, strerror(rte_errno)); - err = rte_errno; - goto port_error; - } - /* Supported Verbs flow priority number detection. */ - if (verb_priorities == 0) - verb_priorities = mlx5_get_max_verbs_prio(eth_dev); - if (verb_priorities < MLX5_VERBS_FLOW_PRIO_8) { - DRV_LOG(ERR, "port %u wrong Verbs flow priorities: %u", - eth_dev->data->port_id, verb_priorities); - err = ENOTSUP; - goto port_error; + /* Get actual MTU if possible. */ + err = mlx5_get_mtu(eth_dev, &priv->mtu); + if (err) { + err = rte_errno; + goto error; + } + DRV_LOG(DEBUG, "port %u MTU is %u", eth_dev->data->port_id, + priv->mtu); + /* Initialize burst functions to prevent crashes before link-up. */ + eth_dev->rx_pkt_burst = removed_rx_burst; + eth_dev->tx_pkt_burst = removed_tx_burst; + eth_dev->dev_ops = &mlx5_dev_ops; + /* Register MAC address. */ + claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0)); + if (vf && config.vf_nl_en) + mlx5_nl_mac_addr_sync(eth_dev); + priv->tcf_context = mlx5_flow_tcf_context_create(); + if (!priv->tcf_context) { + err = -rte_errno; + DRV_LOG(WARNING, + "flow rules relying on switch offloads will not be" + " supported: cannot open libmnl socket: %s", + strerror(rte_errno)); + } else { + struct rte_flow_error error; + unsigned int ifindex = mlx5_ifindex(eth_dev); + + if (!ifindex) { + err = -rte_errno; + error.message = + "cannot retrieve network interface index"; + } else { + err = mlx5_flow_tcf_init(priv->tcf_context, + ifindex, &error); } - priv->config.max_verbs_prio = verb_priorities; - /* - * Once the device is added to the list of memory event - * callback, its global MR cache table cannot be expanded - * on the fly because of deadlock. If it overflows, lookup - * should be done by searching MR list linearly, which is slow. - */ - err = mlx5_mr_btree_init(&priv->mr.cache, - MLX5_MR_BTREE_CACHE_N * 2, - eth_dev->device->numa_node); if (err) { - err = rte_errno; - goto port_error; + DRV_LOG(WARNING, + "flow rules relying on switch offloads will" + " not be supported: %s: %s", + error.message, strerror(rte_errno)); + mlx5_flow_tcf_context_destroy(priv->tcf_context); + priv->tcf_context = NULL; } - /* Add device to memory callback list. */ - rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock); - LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list, - priv, mem_event_cb); - rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock); - rte_eth_dev_probing_finish(eth_dev); - /* - * Each eth_dev instance is assigned its own Verbs context, - * since this one is consumed, let the next iteration open - * another. - */ - ctx = NULL; - continue; -port_error: - if (priv) - rte_free(priv); - if (pd) - claim_zero(mlx5_glue->dealloc_pd(pd)); - if (eth_dev && rte_eal_process_type() == RTE_PROC_PRIMARY) - rte_eth_dev_release_port(eth_dev); - break; } + TAILQ_INIT(&priv->flows); + TAILQ_INIT(&priv->ctrl_flows); + /* Hint libmlx5 to use PMD allocator for data plane resources */ + struct mlx5dv_ctx_allocators alctr = { + .alloc = &mlx5_alloc_verbs_buf, + .free = &mlx5_free_verbs_buf, + .data = priv, + }; + mlx5_glue->dv_set_context_attr(ctx, MLX5DV_CTX_ATTR_BUF_ALLOCATORS, + (void *)((uintptr_t)&alctr)); + /* Bring Ethernet device up. */ + DRV_LOG(DEBUG, "port %u forcing Ethernet interface up", + eth_dev->data->port_id); + mlx5_set_link_up(eth_dev); + /* + * Even though the interrupt handler is not installed yet, + * interrupts will still trigger on the asyn_fd from + * Verbs context returned by ibv_open_device(). + */ + mlx5_link_update(eth_dev, 0); + /* Store device configuration on private structure. */ + priv->config = config; + /* Supported Verbs flow priority number detection. */ + err = mlx5_flow_discover_priorities(eth_dev); + if (err < 0) + goto error; + priv->config.flow_prio = err; /* - * XXX if something went wrong in the loop above, there is a resource - * leak (ctx, pd, priv, dpdk ethdev) but we can do nothing about it as - * long as the dpdk does not provide a way to deallocate a ethdev and a - * way to enumerate the registered ethdevs to free the previous ones. + * Once the device is added to the list of memory event + * callback, its global MR cache table cannot be expanded + * on the fly because of deadlock. If it overflows, lookup + * should be done by searching MR list linearly, which is slow. */ + err = mlx5_mr_btree_init(&priv->mr.cache, + MLX5_MR_BTREE_CACHE_N * 2, + eth_dev->device->numa_node); + if (err) { + err = rte_errno; + goto error; + } + /* Add device to memory callback list. */ + rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock); + LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list, + priv, mem_event_cb); + rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock); + return eth_dev; error: + if (priv) { + if (priv->nl_socket_route >= 0) + close(priv->nl_socket_route); + if (priv->nl_socket_rdma >= 0) + close(priv->nl_socket_rdma); + if (priv->tcf_context) + mlx5_flow_tcf_context_destroy(priv->tcf_context); + if (own_domain_id) + claim_zero(rte_eth_switch_domain_free(priv->domain_id)); + rte_free(priv); + if (eth_dev != NULL) + eth_dev->data->dev_private = NULL; + } + if (pd) + claim_zero(mlx5_glue->dealloc_pd(pd)); + if (eth_dev != NULL) { + /* mac_addrs must not be freed alone because part of dev_private */ + eth_dev->data->mac_addrs = NULL; + rte_eth_dev_release_port(eth_dev); + } if (ctx) claim_zero(mlx5_glue->close_device(ctx)); - if (list) - mlx5_glue->free_device_list(list); - if (err) { - rte_errno = err; + assert(err > 0); + rte_errno = err; + return NULL; +} + +/** Data associated with devices to spawn. */ +struct mlx5_dev_spawn_data { + unsigned int ifindex; /**< Network interface index. */ + struct mlx5_switch_info info; /**< Switch information. */ + struct ibv_device *ibv_dev; /**< Associated IB device. */ + struct rte_eth_dev *eth_dev; /**< Associated Ethernet device. */ +}; + +/** + * Comparison callback to sort device data. + * + * This is meant to be used with qsort(). + * + * @param a[in] + * Pointer to pointer to first data object. + * @param b[in] + * Pointer to pointer to second data object. + * + * @return + * 0 if both objects are equal, less than 0 if the first argument is less + * than the second, greater than 0 otherwise. + */ +static int +mlx5_dev_spawn_data_cmp(const void *a, const void *b) +{ + const struct mlx5_switch_info *si_a = + &((const struct mlx5_dev_spawn_data *)a)->info; + const struct mlx5_switch_info *si_b = + &((const struct mlx5_dev_spawn_data *)b)->info; + int ret; + + /* Master device first. */ + ret = si_b->master - si_a->master; + if (ret) + return ret; + /* Then representor devices. */ + ret = si_b->representor - si_a->representor; + if (ret) + return ret; + /* Unidentified devices come last in no specific order. */ + if (!si_a->representor) + return 0; + /* Order representors by name. */ + return si_a->port_name - si_b->port_name; +} + +/** + * DPDK callback to register a PCI device. + * + * This function spawns Ethernet devices out of a given PCI device. + * + * @param[in] pci_drv + * PCI driver structure (mlx5_driver). + * @param[in] pci_dev + * PCI device information. + * + * @return + * 0 on success, a negative errno value otherwise and rte_errno is set. + */ +static int +mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, + struct rte_pci_device *pci_dev) +{ + struct ibv_device **ibv_list; + unsigned int n = 0; + int vf; + int ret; + + assert(pci_drv == &mlx5_driver); + errno = 0; + ibv_list = mlx5_glue->get_device_list(&ret); + if (!ibv_list) { + rte_errno = errno ? errno : ENOSYS; + DRV_LOG(ERR, "cannot list devices, is ib_uverbs loaded?"); return -rte_errno; } - return 0; + + struct ibv_device *ibv_match[ret + 1]; + + while (ret-- > 0) { + struct rte_pci_addr pci_addr; + + DRV_LOG(DEBUG, "checking device \"%s\"", ibv_list[ret]->name); + if (mlx5_ibv_device_to_pci_addr(ibv_list[ret], &pci_addr)) + continue; + if (pci_dev->addr.domain != pci_addr.domain || + pci_dev->addr.bus != pci_addr.bus || + pci_dev->addr.devid != pci_addr.devid || + pci_dev->addr.function != pci_addr.function) + continue; + DRV_LOG(INFO, "PCI information matches for device \"%s\"", + ibv_list[ret]->name); + ibv_match[n++] = ibv_list[ret]; + } + ibv_match[n] = NULL; + + struct mlx5_dev_spawn_data list[n]; + int nl_route = n ? mlx5_nl_init(NETLINK_ROUTE) : -1; + int nl_rdma = n ? mlx5_nl_init(NETLINK_RDMA) : -1; + unsigned int i; + unsigned int u; + + /* + * The existence of several matching entries (n > 1) means port + * representors have been instantiated. No existing Verbs call nor + * /sys entries can tell them apart, this can only be done through + * Netlink calls assuming kernel drivers are recent enough to + * support them. + * + * In the event of identification failure through Netlink, try again + * through sysfs, then either: + * + * 1. No device matches (n == 0), complain and bail out. + * 2. A single IB device matches (n == 1) and is not a representor, + * assume no switch support. + * 3. Otherwise no safe assumptions can be made; complain louder and + * bail out. + */ + for (i = 0; i != n; ++i) { + list[i].ibv_dev = ibv_match[i]; + list[i].eth_dev = NULL; + if (nl_rdma < 0) + list[i].ifindex = 0; + else + list[i].ifindex = mlx5_nl_ifindex + (nl_rdma, list[i].ibv_dev->name); + if (nl_route < 0 || + !list[i].ifindex || + mlx5_nl_switch_info(nl_route, list[i].ifindex, + &list[i].info) || + ((!list[i].info.representor && !list[i].info.master) && + mlx5_sysfs_switch_info(list[i].ifindex, &list[i].info))) { + list[i].ifindex = 0; + memset(&list[i].info, 0, sizeof(list[i].info)); + continue; + } + } + if (nl_rdma >= 0) + close(nl_rdma); + if (nl_route >= 0) + close(nl_route); + /* Count unidentified devices. */ + for (u = 0, i = 0; i != n; ++i) + if (!list[i].info.master && !list[i].info.representor) + ++u; + if (u) { + if (n == 1 && u == 1) { + /* Case #2. */ + DRV_LOG(INFO, "no switch support detected"); + } else { + /* Case #3. */ + DRV_LOG(ERR, + "unable to tell which of the matching devices" + " is the master (lack of kernel support?)"); + n = 0; + } + } + /* + * Sort list to probe devices in natural order for users convenience + * (i.e. master first, then representors from lowest to highest ID). + */ + if (n) + qsort(list, n, sizeof(*list), mlx5_dev_spawn_data_cmp); + switch (pci_dev->id.device_id) { + case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF: + case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF: + case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF: + case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF: + vf = 1; + break; + default: + vf = 0; + } + for (i = 0; i != n; ++i) { + uint32_t restore; + + list[i].eth_dev = mlx5_dev_spawn + (&pci_dev->device, list[i].ibv_dev, vf, &list[i].info); + if (!list[i].eth_dev) { + if (rte_errno != EBUSY) + break; + /* Device is disabled, ignore it. */ + continue; + } + restore = list[i].eth_dev->data->dev_flags; + rte_eth_copy_pci_info(list[i].eth_dev, pci_dev); + /* Restore non-PCI flags cleared by the above call. */ + list[i].eth_dev->data->dev_flags |= restore; + rte_eth_dev_probing_finish(list[i].eth_dev); + } + mlx5_glue->free_device_list(ibv_list); + if (!n) { + DRV_LOG(WARNING, + "no Verbs device matches PCI device " PCI_PRI_FMT "," + " are kernel drivers loaded?", + pci_dev->addr.domain, pci_dev->addr.bus, + pci_dev->addr.devid, pci_dev->addr.function); + rte_errno = ENOENT; + ret = -rte_errno; + } else if (i != n) { + DRV_LOG(ERR, + "probe of PCI device " PCI_PRI_FMT " aborted after" + " encountering an error: %s", + pci_dev->addr.domain, pci_dev->addr.bus, + pci_dev->addr.devid, pci_dev->addr.function, + strerror(rte_errno)); + ret = -rte_errno; + /* Roll back. */ + while (i--) { + if (!list[i].eth_dev) + continue; + mlx5_dev_close(list[i].eth_dev); + /* mac_addrs must not be freed because in dev_private */ + list[i].eth_dev->data->mac_addrs = NULL; + claim_zero(rte_eth_dev_release_port(list[i].eth_dev)); + } + /* Restore original error. */ + rte_errno = -ret; + } else { + ret = 0; + } + return ret; } static const struct rte_pci_id mlx5_pci_id_map[] = { @@ -1233,6 +1503,10 @@ static const struct rte_pci_id mlx5_pci_id_map[] = { RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_CONNECTX5BF) }, + { + RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX, + PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF) + }, { .vendor_id = 0 }