X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fmlx5%2Fmlx5_ethdev.c;h=ef44cc91fc1c7761cbc0aacd6e47335d2a921ed5;hb=2ae831fb42b1aa273cf4ef20775fa964463be083;hp=b6c7d7a4dcab851c312e80b0ca3135528dd5f654;hpb=771fa900b73aae1ac8ec0ae6ac086e9e164da7b2;p=dpdk.git diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c index b6c7d7a4dc..ef44cc91fc 100644 --- a/drivers/net/mlx5/mlx5_ethdev.c +++ b/drivers/net/mlx5/mlx5_ethdev.c @@ -1,37 +1,13 @@ -/*- - * BSD LICENSE - * - * Copyright 2015 6WIND S.A. - * Copyright 2015 Mellanox. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of 6WIND S.A. nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright 2015 6WIND S.A. + * Copyright 2015 Mellanox Technologies, Ltd */ +#define _GNU_SOURCE + #include +#include +#include #include #include #include @@ -43,37 +19,93 @@ #include #include #include -#include +#include +#include +#include +#include +#include +#include -/* DPDK headers don't like -pedantic. */ -#ifdef PEDANTIC -#pragma GCC diagnostic ignored "-pedantic" -#endif #include -#include +#include +#include #include #include -#ifdef PEDANTIC -#pragma GCC diagnostic error "-pedantic" -#endif +#include +#include +#include #include "mlx5.h" +#include "mlx5_glue.h" +#include "mlx5_rxtx.h" #include "mlx5_utils.h" +/* Add defines in case the running kernel is not the same as user headers. */ +#ifndef ETHTOOL_GLINKSETTINGS +struct ethtool_link_settings { + uint32_t cmd; + uint32_t speed; + uint8_t duplex; + uint8_t port; + uint8_t phy_address; + uint8_t autoneg; + uint8_t mdio_support; + uint8_t eth_to_mdix; + uint8_t eth_tp_mdix_ctrl; + int8_t link_mode_masks_nwords; + uint32_t reserved[8]; + uint32_t link_mode_masks[]; +}; + +#define ETHTOOL_GLINKSETTINGS 0x0000004c +#define ETHTOOL_LINK_MODE_1000baseT_Full_BIT 5 +#define ETHTOOL_LINK_MODE_Autoneg_BIT 6 +#define ETHTOOL_LINK_MODE_1000baseKX_Full_BIT 17 +#define ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT 18 +#define ETHTOOL_LINK_MODE_10000baseKR_Full_BIT 19 +#define ETHTOOL_LINK_MODE_10000baseR_FEC_BIT 20 +#define ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT 21 +#define ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT 22 +#define ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT 23 +#define ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT 24 +#define ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT 25 +#define ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT 26 +#define ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT 27 +#define ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT 28 +#define ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT 29 +#define ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT 30 +#endif +#ifndef HAVE_ETHTOOL_LINK_MODE_25G +#define ETHTOOL_LINK_MODE_25000baseCR_Full_BIT 31 +#define ETHTOOL_LINK_MODE_25000baseKR_Full_BIT 32 +#define ETHTOOL_LINK_MODE_25000baseSR_Full_BIT 33 +#endif +#ifndef HAVE_ETHTOOL_LINK_MODE_50G +#define ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT 34 +#define ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT 35 +#endif +#ifndef HAVE_ETHTOOL_LINK_MODE_100G +#define ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT 36 +#define ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT 37 +#define ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT 38 +#define ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT 39 +#endif + /** * Get interface name from private structure. * - * @param[in] priv - * Pointer to private structure. + * @param[in] dev + * Pointer to Ethernet device. * @param[out] ifname * Interface name output buffer. * * @return - * 0 on success, -1 on failure and errno is set. + * 0 on success, a negative errno value otherwise and rte_errno is set. */ int -priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE]) +mlx5_get_ifname(const struct rte_eth_dev *dev, char (*ifname)[IF_NAMESIZE]) { + struct priv *priv = dev->data->dev_private; DIR *dir; struct dirent *dent; unsigned int dev_type = 0; @@ -81,11 +113,13 @@ priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE]) char match[IF_NAMESIZE] = ""; { - MKSTR(path, "%s/device/net", priv->ctx->device->ibdev_path); + MKSTR(path, "%s/device/net", priv->ibdev_path); dir = opendir(path); - if (dir == NULL) - return -1; + if (dir == NULL) { + rte_errno = errno; + return -rte_errno; + } } while ((dent = readdir(dir)) != NULL) { char *name = dent->d_name; @@ -99,7 +133,7 @@ priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE]) continue; MKSTR(path, "%s/device/net/%s/%s", - priv->ctx->device->ibdev_path, name, + priv->ibdev_path, name, (dev_type ? "dev_id" : "dev_port")); file = fopen(path, "rb"); @@ -132,241 +166,683 @@ try_dev_id: goto try_dev_id; dev_port_prev = dev_port; if (dev_port == (priv->port - 1u)) - snprintf(match, sizeof(match), "%s", name); + strlcpy(match, name, sizeof(match)); } closedir(dir); - if (match[0] == '\0') - return -1; + if (match[0] == '\0') { + rte_errno = ENOENT; + return -rte_errno; + } strncpy(*ifname, match, sizeof(*ifname)); return 0; } /** - * Read from sysfs entry. + * Get the interface index from device name. * - * @param[in] priv - * Pointer to private structure. - * @param[in] entry - * Entry name relative to sysfs path. - * @param[out] buf - * Data output buffer. - * @param size - * Buffer size. + * @param[in] dev + * Pointer to Ethernet device. * * @return - * 0 on success, -1 on failure and errno is set. + * Interface index on success, a negative errno value otherwise and + * rte_errno is set. */ -static int -priv_sysfs_read(const struct priv *priv, const char *entry, - char *buf, size_t size) +int +mlx5_ifindex(const struct rte_eth_dev *dev) { char ifname[IF_NAMESIZE]; - FILE *file; int ret; - int err; - if (priv_get_ifname(priv, &ifname)) - return -1; + ret = mlx5_get_ifname(dev, &ifname); + if (ret) + return ret; + ret = if_nametoindex(ifname); + if (ret == -1) { + rte_errno = errno; + return -rte_errno; + } + return ret; +} - MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path, - ifname, entry); +/** + * Perform ifreq ioctl() on associated Ethernet device. + * + * @param[in] dev + * Pointer to Ethernet device. + * @param req + * Request number to pass to ioctl(). + * @param[out] ifr + * Interface request structure output buffer. + * + * @return + * 0 on success, a negative errno value otherwise and rte_errno is set. + */ +int +mlx5_ifreq(const struct rte_eth_dev *dev, int req, struct ifreq *ifr) +{ + int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP); + int ret = 0; - file = fopen(path, "rb"); - if (file == NULL) - return -1; - ret = fread(buf, 1, size, file); - err = errno; - if (((size_t)ret < size) && (ferror(file))) - ret = -1; - else - ret = size; - fclose(file); - errno = err; - return ret; + if (sock == -1) { + rte_errno = errno; + return -rte_errno; + } + ret = mlx5_get_ifname(dev, &ifr->ifr_name); + if (ret) + goto error; + ret = ioctl(sock, req, ifr); + if (ret == -1) { + rte_errno = errno; + goto error; + } + close(sock); + return 0; +error: + close(sock); + return -rte_errno; } /** - * Write to sysfs entry. + * Get device MTU. * - * @param[in] priv - * Pointer to private structure. - * @param[in] entry - * Entry name relative to sysfs path. - * @param[in] buf - * Data buffer. - * @param size - * Buffer size. + * @param dev + * Pointer to Ethernet device. + * @param[out] mtu + * MTU value output buffer. * * @return - * 0 on success, -1 on failure and errno is set. + * 0 on success, a negative errno value otherwise and rte_errno is set. + */ +int +mlx5_get_mtu(struct rte_eth_dev *dev, uint16_t *mtu) +{ + struct ifreq request; + int ret = mlx5_ifreq(dev, SIOCGIFMTU, &request); + + if (ret) + return ret; + *mtu = request.ifr_mtu; + return 0; +} + +/** + * Set device MTU. + * + * @param dev + * Pointer to Ethernet device. + * @param mtu + * MTU value to set. + * + * @return + * 0 on success, a negative errno value otherwise and rte_errno is set. */ static int -priv_sysfs_write(const struct priv *priv, const char *entry, - char *buf, size_t size) +mlx5_set_mtu(struct rte_eth_dev *dev, uint16_t mtu) +{ + struct ifreq request = { .ifr_mtu = mtu, }; + + return mlx5_ifreq(dev, SIOCSIFMTU, &request); +} + +/** + * Set device flags. + * + * @param dev + * Pointer to Ethernet device. + * @param keep + * Bitmask for flags that must remain untouched. + * @param flags + * Bitmask for flags to modify. + * + * @return + * 0 on success, a negative errno value otherwise and rte_errno is set. + */ +int +mlx5_set_flags(struct rte_eth_dev *dev, unsigned int keep, unsigned int flags) +{ + struct ifreq request; + int ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &request); + + if (ret) + return ret; + request.ifr_flags &= keep; + request.ifr_flags |= flags & ~keep; + return mlx5_ifreq(dev, SIOCSIFFLAGS, &request); +} + +/** + * DPDK callback for Ethernet device configuration. + * + * @param dev + * Pointer to Ethernet device structure. + * + * @return + * 0 on success, a negative errno value otherwise and rte_errno is set. + */ +int +mlx5_dev_configure(struct rte_eth_dev *dev) +{ + struct priv *priv = dev->data->dev_private; + unsigned int rxqs_n = dev->data->nb_rx_queues; + unsigned int txqs_n = dev->data->nb_tx_queues; + unsigned int i; + unsigned int j; + unsigned int reta_idx_n; + const uint8_t use_app_rss_key = + !!dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key; + uint64_t supp_tx_offloads = mlx5_get_tx_port_offloads(dev); + uint64_t tx_offloads = dev->data->dev_conf.txmode.offloads; + uint64_t supp_rx_offloads = + (mlx5_get_rx_port_offloads() | + mlx5_get_rx_queue_offloads(dev)); + uint64_t rx_offloads = dev->data->dev_conf.rxmode.offloads; + int ret = 0; + + if ((tx_offloads & supp_tx_offloads) != tx_offloads) { + DRV_LOG(ERR, + "port %u some Tx offloads are not supported requested" + " 0x%" PRIx64 " supported 0x%" PRIx64, + dev->data->port_id, tx_offloads, supp_tx_offloads); + rte_errno = ENOTSUP; + return -rte_errno; + } + if ((rx_offloads & supp_rx_offloads) != rx_offloads) { + DRV_LOG(ERR, + "port %u some Rx offloads are not supported requested" + " 0x%" PRIx64 " supported 0x%" PRIx64, + dev->data->port_id, rx_offloads, supp_rx_offloads); + rte_errno = ENOTSUP; + return -rte_errno; + } + if (use_app_rss_key && + (dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key_len != + rss_hash_default_key_len)) { + DRV_LOG(ERR, "port %u RSS key len must be %zu Bytes long", + dev->data->port_id, rss_hash_default_key_len); + rte_errno = EINVAL; + return -rte_errno; + } + priv->rss_conf.rss_key = + rte_realloc(priv->rss_conf.rss_key, + rss_hash_default_key_len, 0); + if (!priv->rss_conf.rss_key) { + DRV_LOG(ERR, "port %u cannot allocate RSS hash key memory (%u)", + dev->data->port_id, rxqs_n); + rte_errno = ENOMEM; + return -rte_errno; + } + memcpy(priv->rss_conf.rss_key, + use_app_rss_key ? + dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key : + rss_hash_default_key, + rss_hash_default_key_len); + priv->rss_conf.rss_key_len = rss_hash_default_key_len; + priv->rss_conf.rss_hf = dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf; + priv->rxqs = (void *)dev->data->rx_queues; + priv->txqs = (void *)dev->data->tx_queues; + if (txqs_n != priv->txqs_n) { + DRV_LOG(INFO, "port %u Tx queues number update: %u -> %u", + dev->data->port_id, priv->txqs_n, txqs_n); + priv->txqs_n = txqs_n; + } + if (rxqs_n > priv->config.ind_table_max_size) { + DRV_LOG(ERR, "port %u cannot handle this many Rx queues (%u)", + dev->data->port_id, rxqs_n); + rte_errno = EINVAL; + return -rte_errno; + } + if (rxqs_n == priv->rxqs_n) + return 0; + DRV_LOG(INFO, "port %u Rx queues number update: %u -> %u", + dev->data->port_id, priv->rxqs_n, rxqs_n); + priv->rxqs_n = rxqs_n; + /* If the requested number of RX queues is not a power of two, use the + * maximum indirection table size for better balancing. + * The result is always rounded to the next power of two. */ + reta_idx_n = (1 << log2above((rxqs_n & (rxqs_n - 1)) ? + priv->config.ind_table_max_size : + rxqs_n)); + ret = mlx5_rss_reta_index_resize(dev, reta_idx_n); + if (ret) + return ret; + /* When the number of RX queues is not a power of two, the remaining + * table entries are padded with reused WQs and hashes are not spread + * uniformly. */ + for (i = 0, j = 0; (i != reta_idx_n); ++i) { + (*priv->reta_idx)[i] = j; + if (++j == rxqs_n) + j = 0; + } + return 0; +} + +/** + * DPDK callback to get information about the device. + * + * @param dev + * Pointer to Ethernet device structure. + * @param[out] info + * Info structure output buffer. + */ +void +mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info) { + struct priv *priv = dev->data->dev_private; + struct mlx5_dev_config *config = &priv->config; + unsigned int max; char ifname[IF_NAMESIZE]; - FILE *file; - int ret; - int err; - if (priv_get_ifname(priv, &ifname)) - return -1; + /* FIXME: we should ask the device for these values. */ + info->min_rx_bufsize = 32; + info->max_rx_pktlen = 65536; + /* + * Since we need one CQ per QP, the limit is the minimum number + * between the two values. + */ + max = RTE_MIN(priv->device_attr.orig_attr.max_cq, + priv->device_attr.orig_attr.max_qp); + /* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */ + if (max >= 65535) + max = 65535; + info->max_rx_queues = max; + info->max_tx_queues = max; + info->max_mac_addrs = RTE_DIM(priv->mac); + info->rx_queue_offload_capa = mlx5_get_rx_queue_offloads(dev); + info->rx_offload_capa = (mlx5_get_rx_port_offloads() | + info->rx_queue_offload_capa); + info->tx_offload_capa = mlx5_get_tx_port_offloads(dev); + if (mlx5_get_ifname(dev, &ifname) == 0) + info->if_index = if_nametoindex(ifname); + info->reta_size = priv->reta_idx_n ? + priv->reta_idx_n : config->ind_table_max_size; + info->hash_key_size = rss_hash_default_key_len; + info->speed_capa = priv->link_speed_capa; + info->flow_type_rss_offloads = ~MLX5_RSS_HF_MASK; +} - MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path, - ifname, entry); +/** + * Get supported packet types. + * + * @param dev + * Pointer to Ethernet device structure. + * + * @return + * A pointer to the supported Packet types array. + */ +const uint32_t * +mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev) +{ + static const uint32_t ptypes[] = { + /* refers to rxq_cq_to_pkt_type() */ + RTE_PTYPE_L2_ETHER, + RTE_PTYPE_L3_IPV4_EXT_UNKNOWN, + RTE_PTYPE_L3_IPV6_EXT_UNKNOWN, + RTE_PTYPE_L4_NONFRAG, + RTE_PTYPE_L4_FRAG, + RTE_PTYPE_L4_TCP, + RTE_PTYPE_L4_UDP, + RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN, + RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN, + RTE_PTYPE_INNER_L4_NONFRAG, + RTE_PTYPE_INNER_L4_FRAG, + RTE_PTYPE_INNER_L4_TCP, + RTE_PTYPE_INNER_L4_UDP, + RTE_PTYPE_UNKNOWN + }; - file = fopen(path, "wb"); - if (file == NULL) - return -1; - ret = fwrite(buf, 1, size, file); - err = errno; - if (((size_t)ret < size) || (ferror(file))) - ret = -1; - else - ret = size; - fclose(file); - errno = err; - return ret; + if (dev->rx_pkt_burst == mlx5_rx_burst || + dev->rx_pkt_burst == mlx5_rx_burst_vec) + return ptypes; + return NULL; } /** - * Get unsigned long sysfs property. + * DPDK callback to retrieve physical link information. * - * @param priv - * Pointer to private structure. - * @param[in] name - * Entry name relative to sysfs path. - * @param[out] value - * Value output buffer. + * @param dev + * Pointer to Ethernet device structure. + * @param[out] link + * Storage for current link status. * * @return - * 0 on success, -1 on failure and errno is set. + * 0 on success, a negative errno value otherwise and rte_errno is set. */ static int -priv_get_sysfs_ulong(struct priv *priv, const char *name, unsigned long *value) +mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev, + struct rte_eth_link *link) { + struct priv *priv = dev->data->dev_private; + struct ethtool_cmd edata = { + .cmd = ETHTOOL_GSET /* Deprecated since Linux v4.5. */ + }; + struct ifreq ifr; + struct rte_eth_link dev_link; + int link_speed = 0; int ret; - unsigned long value_ret; - char value_str[32]; - ret = priv_sysfs_read(priv, name, value_str, (sizeof(value_str) - 1)); - if (ret == -1) { - DEBUG("cannot read %s value from sysfs: %s", - name, strerror(errno)); - return -1; - } - value_str[ret] = '\0'; - errno = 0; - value_ret = strtoul(value_str, NULL, 0); - if (errno) { - DEBUG("invalid %s value `%s': %s", name, value_str, - strerror(errno)); - return -1; - } - *value = value_ret; + ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &ifr); + if (ret) { + DRV_LOG(WARNING, "port %u ioctl(SIOCGIFFLAGS) failed: %s", + dev->data->port_id, strerror(rte_errno)); + return ret; + } + memset(&dev_link, 0, sizeof(dev_link)); + dev_link.link_status = ((ifr.ifr_flags & IFF_UP) && + (ifr.ifr_flags & IFF_RUNNING)); + ifr.ifr_data = (void *)&edata; + ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr); + if (ret) { + DRV_LOG(WARNING, + "port %u ioctl(SIOCETHTOOL, ETHTOOL_GSET) failed: %s", + dev->data->port_id, strerror(rte_errno)); + return ret; + } + link_speed = ethtool_cmd_speed(&edata); + if (link_speed == -1) + dev_link.link_speed = 0; + else + dev_link.link_speed = link_speed; + priv->link_speed_capa = 0; + if (edata.supported & SUPPORTED_Autoneg) + priv->link_speed_capa |= ETH_LINK_SPEED_AUTONEG; + if (edata.supported & (SUPPORTED_1000baseT_Full | + SUPPORTED_1000baseKX_Full)) + priv->link_speed_capa |= ETH_LINK_SPEED_1G; + if (edata.supported & SUPPORTED_10000baseKR_Full) + priv->link_speed_capa |= ETH_LINK_SPEED_10G; + if (edata.supported & (SUPPORTED_40000baseKR4_Full | + SUPPORTED_40000baseCR4_Full | + SUPPORTED_40000baseSR4_Full | + SUPPORTED_40000baseLR4_Full)) + priv->link_speed_capa |= ETH_LINK_SPEED_40G; + dev_link.link_duplex = ((edata.duplex == DUPLEX_HALF) ? + ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX); + dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds & + ETH_LINK_SPEED_FIXED); + if ((dev_link.link_speed && !dev_link.link_status) || + (!dev_link.link_speed && dev_link.link_status)) { + rte_errno = EAGAIN; + return -rte_errno; + } + *link = dev_link; return 0; } /** - * Set unsigned long sysfs property. + * Retrieve physical link information (unlocked version using new ioctl). * - * @param priv - * Pointer to private structure. - * @param[in] name - * Entry name relative to sysfs path. - * @param value - * Value to set. + * @param dev + * Pointer to Ethernet device structure. + * @param[out] link + * Storage for current link status. * * @return - * 0 on success, -1 on failure and errno is set. + * 0 on success, a negative errno value otherwise and rte_errno is set. */ static int -priv_set_sysfs_ulong(struct priv *priv, const char *name, unsigned long value) +mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev, + struct rte_eth_link *link) + { + struct priv *priv = dev->data->dev_private; + struct ethtool_link_settings gcmd = { .cmd = ETHTOOL_GLINKSETTINGS }; + struct ifreq ifr; + struct rte_eth_link dev_link; + uint64_t sc; int ret; - MKSTR(value_str, "%lu", value); - ret = priv_sysfs_write(priv, name, value_str, (sizeof(value_str) - 1)); - if (ret == -1) { - DEBUG("cannot write %s `%s' (%lu) to sysfs: %s", - name, value_str, value, strerror(errno)); - return -1; + ret = mlx5_ifreq(dev, SIOCGIFFLAGS, &ifr); + if (ret) { + DRV_LOG(WARNING, "port %u ioctl(SIOCGIFFLAGS) failed: %s", + dev->data->port_id, strerror(rte_errno)); + return ret; + } + memset(&dev_link, 0, sizeof(dev_link)); + dev_link.link_status = ((ifr.ifr_flags & IFF_UP) && + (ifr.ifr_flags & IFF_RUNNING)); + ifr.ifr_data = (void *)&gcmd; + ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr); + if (ret) { + DRV_LOG(DEBUG, + "port %u ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS)" + " failed: %s", + dev->data->port_id, strerror(rte_errno)); + return ret; } + gcmd.link_mode_masks_nwords = -gcmd.link_mode_masks_nwords; + + alignas(struct ethtool_link_settings) + uint8_t data[offsetof(struct ethtool_link_settings, link_mode_masks) + + sizeof(uint32_t) * gcmd.link_mode_masks_nwords * 3]; + struct ethtool_link_settings *ecmd = (void *)data; + + *ecmd = gcmd; + ifr.ifr_data = (void *)ecmd; + ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr); + if (ret) { + DRV_LOG(DEBUG, + "port %u ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS)" + " failed: %s", + dev->data->port_id, strerror(rte_errno)); + return ret; + } + dev_link.link_speed = ecmd->speed; + sc = ecmd->link_mode_masks[0] | + ((uint64_t)ecmd->link_mode_masks[1] << 32); + priv->link_speed_capa = 0; + if (sc & MLX5_BITSHIFT(ETHTOOL_LINK_MODE_Autoneg_BIT)) + priv->link_speed_capa |= ETH_LINK_SPEED_AUTONEG; + if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_1000baseT_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT))) + priv->link_speed_capa |= ETH_LINK_SPEED_1G; + if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_10000baseR_FEC_BIT))) + priv->link_speed_capa |= ETH_LINK_SPEED_10G; + if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT))) + priv->link_speed_capa |= ETH_LINK_SPEED_20G; + if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT))) + priv->link_speed_capa |= ETH_LINK_SPEED_40G; + if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT))) + priv->link_speed_capa |= ETH_LINK_SPEED_56G; + if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_25000baseCR_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_25000baseKR_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_25000baseSR_Full_BIT))) + priv->link_speed_capa |= ETH_LINK_SPEED_25G; + if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT))) + priv->link_speed_capa |= ETH_LINK_SPEED_50G; + if (sc & (MLX5_BITSHIFT(ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT) | + MLX5_BITSHIFT(ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT))) + priv->link_speed_capa |= ETH_LINK_SPEED_100G; + dev_link.link_duplex = ((ecmd->duplex == DUPLEX_HALF) ? + ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX); + dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds & + ETH_LINK_SPEED_FIXED); + if ((dev_link.link_speed && !dev_link.link_status) || + (!dev_link.link_speed && dev_link.link_status)) { + rte_errno = EAGAIN; + return -rte_errno; + } + *link = dev_link; return 0; } /** - * Perform ifreq ioctl() on associated Ethernet device. + * DPDK callback to retrieve physical link information. * - * @param[in] priv - * Pointer to private structure. - * @param req - * Request number to pass to ioctl(). - * @param[out] ifr - * Interface request structure output buffer. + * @param dev + * Pointer to Ethernet device structure. + * @param wait_to_complete + * Wait for request completion. * * @return - * 0 on success, -1 on failure and errno is set. + * 0 if link status was not updated, positive if it was, a negative errno + * value otherwise and rte_errno is set. */ int -priv_ifreq(const struct priv *priv, int req, struct ifreq *ifr) +mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete) { - int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP); - int ret = -1; + int ret; + struct rte_eth_link dev_link; + time_t start_time = time(NULL); - if (sock == -1) - return ret; - if (priv_get_ifname(priv, &ifr->ifr_name) == 0) - ret = ioctl(sock, req, ifr); - close(sock); + do { + ret = mlx5_link_update_unlocked_gset(dev, &dev_link); + if (ret) + ret = mlx5_link_update_unlocked_gs(dev, &dev_link); + if (ret == 0) + break; + /* Handle wait to complete situation. */ + if (wait_to_complete && ret == -EAGAIN) { + if (abs((int)difftime(time(NULL), start_time)) < + MLX5_LINK_STATUS_TIMEOUT) { + usleep(0); + continue; + } else { + rte_errno = EBUSY; + return -rte_errno; + } + } else if (ret < 0) { + return ret; + } + } while (wait_to_complete); + ret = !!memcmp(&dev->data->dev_link, &dev_link, + sizeof(struct rte_eth_link)); + dev->data->dev_link = dev_link; return ret; } /** - * Get device MTU. + * DPDK callback to change the MTU. * - * @param priv - * Pointer to private structure. - * @param[out] mtu - * MTU value output buffer. + * @param dev + * Pointer to Ethernet device structure. + * @param in_mtu + * New MTU. + * + * @return + * 0 on success, a negative errno value otherwise and rte_errno is set. + */ +int +mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu) +{ + struct priv *priv = dev->data->dev_private; + uint16_t kern_mtu = 0; + int ret; + + ret = mlx5_get_mtu(dev, &kern_mtu); + if (ret) + return ret; + /* Set kernel interface MTU first. */ + ret = mlx5_set_mtu(dev, mtu); + if (ret) + return ret; + ret = mlx5_get_mtu(dev, &kern_mtu); + if (ret) + return ret; + if (kern_mtu == mtu) { + priv->mtu = mtu; + DRV_LOG(DEBUG, "port %u adapter MTU set to %u", + dev->data->port_id, mtu); + return 0; + } + rte_errno = EAGAIN; + return -rte_errno; +} + +/** + * DPDK callback to get flow control status. + * + * @param dev + * Pointer to Ethernet device structure. + * @param[out] fc_conf + * Flow control output buffer. * * @return - * 0 on success, -1 on failure and errno is set. + * 0 on success, a negative errno value otherwise and rte_errno is set. */ int -priv_get_mtu(struct priv *priv, uint16_t *mtu) +mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf) { - unsigned long ulong_mtu; + struct ifreq ifr; + struct ethtool_pauseparam ethpause = { + .cmd = ETHTOOL_GPAUSEPARAM + }; + int ret; - if (priv_get_sysfs_ulong(priv, "mtu", &ulong_mtu) == -1) - return -1; - *mtu = ulong_mtu; + ifr.ifr_data = (void *)ðpause; + ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr); + if (ret) { + DRV_LOG(WARNING, + "port %u ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM) failed:" + " %s", + dev->data->port_id, strerror(rte_errno)); + return ret; + } + fc_conf->autoneg = ethpause.autoneg; + if (ethpause.rx_pause && ethpause.tx_pause) + fc_conf->mode = RTE_FC_FULL; + else if (ethpause.rx_pause) + fc_conf->mode = RTE_FC_RX_PAUSE; + else if (ethpause.tx_pause) + fc_conf->mode = RTE_FC_TX_PAUSE; + else + fc_conf->mode = RTE_FC_NONE; return 0; } /** - * Set device flags. + * DPDK callback to modify flow control parameters. * - * @param priv - * Pointer to private structure. - * @param keep - * Bitmask for flags that must remain untouched. - * @param flags - * Bitmask for flags to modify. + * @param dev + * Pointer to Ethernet device structure. + * @param[in] fc_conf + * Flow control parameters. * * @return - * 0 on success, -1 on failure and errno is set. + * 0 on success, a negative errno value otherwise and rte_errno is set. */ int -priv_set_flags(struct priv *priv, unsigned int keep, unsigned int flags) +mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf) { - unsigned long tmp; + struct ifreq ifr; + struct ethtool_pauseparam ethpause = { + .cmd = ETHTOOL_SPAUSEPARAM + }; + int ret; - if (priv_get_sysfs_ulong(priv, "flags", &tmp) == -1) - return -1; - tmp &= keep; - tmp |= flags; - return priv_set_sysfs_ulong(priv, "flags", tmp); + ifr.ifr_data = (void *)ðpause; + ethpause.autoneg = fc_conf->autoneg; + if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) || + (fc_conf->mode & RTE_FC_RX_PAUSE)) + ethpause.rx_pause = 1; + else + ethpause.rx_pause = 0; + + if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) || + (fc_conf->mode & RTE_FC_TX_PAUSE)) + ethpause.tx_pause = 1; + else + ethpause.tx_pause = 0; + ret = mlx5_ifreq(dev, SIOCETHTOOL, &ifr); + if (ret) { + DRV_LOG(WARNING, + "port %u ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)" + " failed: %s", + dev->data->port_id, strerror(rte_errno)); + return ret; + } + return 0; } /** @@ -378,7 +854,7 @@ priv_set_flags(struct priv *priv, unsigned int keep, unsigned int flags) * PCI bus address output buffer. * * @return - * 0 on success, -1 on failure and errno is set. + * 0 on success, a negative errno value otherwise and rte_errno is set. */ int mlx5_ibv_device_to_pci_addr(const struct ibv_device *device, @@ -389,8 +865,10 @@ mlx5_ibv_device_to_pci_addr(const struct ibv_device *device, MKSTR(path, "%s/device/uevent", device->ibdev_path); file = fopen(path, "rb"); - if (file == NULL) - return -1; + if (file == NULL) { + rte_errno = errno; + return -rte_errno; + } while (fgets(line, sizeof(line), file) == line) { size_t len = strlen(line); int ret; @@ -406,7 +884,7 @@ mlx5_ibv_device_to_pci_addr(const struct ibv_device *device, /* Extract information. */ if (sscanf(line, "PCI_SLOT_NAME=" - "%" SCNx16 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n", + "%" SCNx32 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n", &pci_addr->domain, &pci_addr->bus, &pci_addr->devid, @@ -418,3 +896,273 @@ mlx5_ibv_device_to_pci_addr(const struct ibv_device *device, fclose(file); return 0; } + +/** + * Device status handler. + * + * @param dev + * Pointer to Ethernet device. + * @param events + * Pointer to event flags holder. + * + * @return + * Events bitmap of callback process which can be called immediately. + */ +static uint32_t +mlx5_dev_status_handler(struct rte_eth_dev *dev) +{ + struct priv *priv = dev->data->dev_private; + struct ibv_async_event event; + uint32_t ret = 0; + + if (mlx5_link_update(dev, 0) == -EAGAIN) { + usleep(0); + return 0; + } + /* Read all message and acknowledge them. */ + for (;;) { + if (mlx5_glue->get_async_event(priv->ctx, &event)) + break; + if ((event.event_type == IBV_EVENT_PORT_ACTIVE || + event.event_type == IBV_EVENT_PORT_ERR) && + (dev->data->dev_conf.intr_conf.lsc == 1)) + ret |= (1 << RTE_ETH_EVENT_INTR_LSC); + else if (event.event_type == IBV_EVENT_DEVICE_FATAL && + dev->data->dev_conf.intr_conf.rmv == 1) + ret |= (1 << RTE_ETH_EVENT_INTR_RMV); + else + DRV_LOG(DEBUG, + "port %u event type %d on not handled", + dev->data->port_id, event.event_type); + mlx5_glue->ack_async_event(&event); + } + return ret; +} + +/** + * Handle interrupts from the NIC. + * + * @param[in] intr_handle + * Interrupt handler. + * @param cb_arg + * Callback argument. + */ +void +mlx5_dev_interrupt_handler(void *cb_arg) +{ + struct rte_eth_dev *dev = cb_arg; + uint32_t events; + + events = mlx5_dev_status_handler(dev); + if (events & (1 << RTE_ETH_EVENT_INTR_LSC)) + _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL); + if (events & (1 << RTE_ETH_EVENT_INTR_RMV)) + _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_RMV, NULL); +} + +/** + * Handle interrupts from the socket. + * + * @param cb_arg + * Callback argument. + */ +static void +mlx5_dev_handler_socket(void *cb_arg) +{ + struct rte_eth_dev *dev = cb_arg; + + mlx5_socket_handle(dev); +} + +/** + * Uninstall interrupt handler. + * + * @param dev + * Pointer to Ethernet device. + */ +void +mlx5_dev_interrupt_handler_uninstall(struct rte_eth_dev *dev) +{ + struct priv *priv = dev->data->dev_private; + + if (dev->data->dev_conf.intr_conf.lsc || + dev->data->dev_conf.intr_conf.rmv) + rte_intr_callback_unregister(&priv->intr_handle, + mlx5_dev_interrupt_handler, dev); + if (priv->primary_socket) + rte_intr_callback_unregister(&priv->intr_handle_socket, + mlx5_dev_handler_socket, dev); + priv->intr_handle.fd = 0; + priv->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN; + priv->intr_handle_socket.fd = 0; + priv->intr_handle_socket.type = RTE_INTR_HANDLE_UNKNOWN; +} + +/** + * Install interrupt handler. + * + * @param dev + * Pointer to Ethernet device. + */ +void +mlx5_dev_interrupt_handler_install(struct rte_eth_dev *dev) +{ + struct priv *priv = dev->data->dev_private; + int ret; + int flags; + + assert(priv->ctx->async_fd > 0); + flags = fcntl(priv->ctx->async_fd, F_GETFL); + ret = fcntl(priv->ctx->async_fd, F_SETFL, flags | O_NONBLOCK); + if (ret) { + DRV_LOG(INFO, + "port %u failed to change file descriptor async event" + " queue", + dev->data->port_id); + dev->data->dev_conf.intr_conf.lsc = 0; + dev->data->dev_conf.intr_conf.rmv = 0; + } + if (dev->data->dev_conf.intr_conf.lsc || + dev->data->dev_conf.intr_conf.rmv) { + priv->intr_handle.fd = priv->ctx->async_fd; + priv->intr_handle.type = RTE_INTR_HANDLE_EXT; + rte_intr_callback_register(&priv->intr_handle, + mlx5_dev_interrupt_handler, dev); + } + ret = mlx5_socket_init(dev); + if (ret) + DRV_LOG(ERR, "port %u cannot initialise socket: %s", + dev->data->port_id, strerror(rte_errno)); + else if (priv->primary_socket) { + priv->intr_handle_socket.fd = priv->primary_socket; + priv->intr_handle_socket.type = RTE_INTR_HANDLE_EXT; + rte_intr_callback_register(&priv->intr_handle_socket, + mlx5_dev_handler_socket, dev); + } +} + +/** + * DPDK callback to bring the link DOWN. + * + * @param dev + * Pointer to Ethernet device structure. + * + * @return + * 0 on success, a negative errno value otherwise and rte_errno is set. + */ +int +mlx5_set_link_down(struct rte_eth_dev *dev) +{ + return mlx5_set_flags(dev, ~IFF_UP, ~IFF_UP); +} + +/** + * DPDK callback to bring the link UP. + * + * @param dev + * Pointer to Ethernet device structure. + * + * @return + * 0 on success, a negative errno value otherwise and rte_errno is set. + */ +int +mlx5_set_link_up(struct rte_eth_dev *dev) +{ + return mlx5_set_flags(dev, ~IFF_UP, IFF_UP); +} + +/** + * Configure the TX function to use. + * + * @param dev + * Pointer to private data structure. + * + * @return + * Pointer to selected Tx burst function. + */ +eth_tx_burst_t +mlx5_select_tx_function(struct rte_eth_dev *dev) +{ + struct priv *priv = dev->data->dev_private; + eth_tx_burst_t tx_pkt_burst = mlx5_tx_burst; + struct mlx5_dev_config *config = &priv->config; + uint64_t tx_offloads = dev->data->dev_conf.txmode.offloads; + int tso = !!(tx_offloads & (DEV_TX_OFFLOAD_TCP_TSO | + DEV_TX_OFFLOAD_VXLAN_TNL_TSO | + DEV_TX_OFFLOAD_GRE_TNL_TSO)); + int vlan_insert = !!(tx_offloads & DEV_TX_OFFLOAD_VLAN_INSERT); + + assert(priv != NULL); + /* Select appropriate TX function. */ + if (vlan_insert || tso) + return tx_pkt_burst; + if (config->mps == MLX5_MPW_ENHANCED) { + if (mlx5_check_vec_tx_support(dev) > 0) { + if (mlx5_check_raw_vec_tx_support(dev) > 0) + tx_pkt_burst = mlx5_tx_burst_raw_vec; + else + tx_pkt_burst = mlx5_tx_burst_vec; + DRV_LOG(DEBUG, + "port %u selected enhanced MPW Tx vectorized" + " function", + dev->data->port_id); + } else { + tx_pkt_burst = mlx5_tx_burst_empw; + DRV_LOG(DEBUG, + "port %u selected enhanced MPW Tx function", + dev->data->port_id); + } + } else if (config->mps && (config->txq_inline > 0)) { + tx_pkt_burst = mlx5_tx_burst_mpw_inline; + DRV_LOG(DEBUG, "port %u selected MPW inline Tx function", + dev->data->port_id); + } else if (config->mps) { + tx_pkt_burst = mlx5_tx_burst_mpw; + DRV_LOG(DEBUG, "port %u selected MPW Tx function", + dev->data->port_id); + } + return tx_pkt_burst; +} + +/** + * Configure the RX function to use. + * + * @param dev + * Pointer to private data structure. + * + * @return + * Pointer to selected Rx burst function. + */ +eth_rx_burst_t +mlx5_select_rx_function(struct rte_eth_dev *dev) +{ + eth_rx_burst_t rx_pkt_burst = mlx5_rx_burst; + + assert(dev != NULL); + if (mlx5_check_vec_rx_support(dev) > 0) { + rx_pkt_burst = mlx5_rx_burst_vec; + DRV_LOG(DEBUG, "port %u selected Rx vectorized function", + dev->data->port_id); + } + return rx_pkt_burst; +} + +/** + * Check if mlx5 device was removed. + * + * @param dev + * Pointer to Ethernet device structure. + * + * @return + * 1 when device is removed, otherwise 0. + */ +int +mlx5_is_removed(struct rte_eth_dev *dev) +{ + struct ibv_device_attr device_attr; + struct priv *priv = dev->data->dev_private; + + if (mlx5_glue->query_device(priv->ctx, &device_attr) == EIO) + return 1; + return 0; +}