X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fmlx5%2Fmlx5_txq.c;h=fe3b4ec76d74cd28d2bcbeec06f715bbba843251;hb=8d0715f054b44750c2e1553d6af29487bcea25d8;hp=82493d7cb261e97d55f10f83d2721c7ad9ee74c0;hpb=42280dd91b9e2c68eb4f6842cf2c66decb4e87d1;p=dpdk.git diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c index 82493d7cb2..fe3b4ec76d 100644 --- a/drivers/net/mlx5/mlx5_txq.c +++ b/drivers/net/mlx5/mlx5_txq.c @@ -47,7 +47,7 @@ txq_alloc_elts(struct mlx5_txq_ctrl *txq_ctrl) unsigned int i; for (i = 0; (i != elts_n); ++i) - (*txq_ctrl->txq.elts)[i] = NULL; + txq_ctrl->txq.elts[i] = NULL; DRV_LOG(DEBUG, "port %u Tx queue %u allocated and configured %u WRs", PORT_ID(txq_ctrl->priv), txq_ctrl->txq.idx, elts_n); txq_ctrl->txq.elts_head = 0; @@ -68,7 +68,7 @@ txq_free_elts(struct mlx5_txq_ctrl *txq_ctrl) const uint16_t elts_m = elts_n - 1; uint16_t elts_head = txq_ctrl->txq.elts_head; uint16_t elts_tail = txq_ctrl->txq.elts_tail; - struct rte_mbuf *(*elts)[elts_n] = txq_ctrl->txq.elts; + struct rte_mbuf *(*elts)[elts_n] = &txq_ctrl->txq.elts; DRV_LOG(DEBUG, "port %u Tx queue %u freeing WRs", PORT_ID(txq_ctrl->priv), txq_ctrl->txq.idx); @@ -364,25 +364,6 @@ error: return -rte_errno; } -/** - * Check if the burst function is using eMPW. - * - * @param tx_pkt_burst - * Tx burst function pointer. - * - * @return - * 1 if the burst function is using eMPW, 0 otherwise. - */ -static int -is_empw_burst_func(eth_tx_burst_t tx_pkt_burst) -{ - if (tx_pkt_burst == mlx5_tx_burst_raw_vec || - tx_pkt_burst == mlx5_tx_burst_vec || - tx_pkt_burst == mlx5_tx_burst_empw) - return 1; - return 0; -} - /** * Create the Tx queue Verbs object. * @@ -407,16 +388,19 @@ mlx5_txq_ibv_new(struct rte_eth_dev *dev, uint16_t idx) struct ibv_qp_init_attr_ex init; struct ibv_cq_init_attr_ex cq; struct ibv_qp_attr mod; - struct ibv_cq_ex cq_attr; } attr; unsigned int cqe_n; struct mlx5dv_qp qp = { .comp_mask = MLX5DV_QP_MASK_UAR_MMAP_OFFSET }; struct mlx5dv_cq cq_info; struct mlx5dv_obj obj; const int desc = 1 << txq_data->elts_n; - eth_tx_burst_t tx_pkt_burst = mlx5_select_tx_function(dev); int ret = 0; +#ifdef HAVE_IBV_FLOW_DV_SUPPORT + /* If using DevX, need additional mask to read tisn value. */ + if (priv->config.devx && !priv->sh->tdn) + qp.comp_mask |= MLX5DV_QP_MASK_RAW_QP_HANDLES; +#endif assert(txq_data); priv->verbs_alloc_ctx.type = MLX5_VERBS_ALLOC_TYPE_TX_QUEUE; priv->verbs_alloc_ctx.obj = txq_ctrl; @@ -431,9 +415,8 @@ mlx5_txq_ibv_new(struct rte_eth_dev *dev, uint16_t idx) attr.cq = (struct ibv_cq_init_attr_ex){ .comp_mask = 0, }; - cqe_n = desc / MLX5_TX_COMP_THRESH + 1; - if (is_empw_burst_func(tx_pkt_burst)) - cqe_n += MLX5_TX_COMP_THRESH_INLINE_DIV; + cqe_n = desc / MLX5_TX_COMP_THRESH + + 1 + MLX5_TX_COMP_THRESH_INLINE_DIV; tmpl.cq = mlx5_glue->create_cq(priv->sh->ctx, cqe_n, NULL, NULL, 0); if (tmpl.cq == NULL) { DRV_LOG(ERR, "port %u Tx queue %u CQ creation failure", @@ -471,7 +454,7 @@ mlx5_txq_ibv_new(struct rte_eth_dev *dev, uint16_t idx) .pd = priv->sh->pd, .comp_mask = IBV_QP_INIT_ATTR_PD, }; - if (txq_data->max_inline) + if (txq_data->inlen_send) attr.init.cap.max_inline_data = txq_ctrl->max_inline_data; if (txq_data->tso_en) { attr.init.max_tso_header = txq_ctrl->max_tso_header; @@ -545,25 +528,50 @@ mlx5_txq_ibv_new(struct rte_eth_dev *dev, uint16_t idx) goto error; } txq_data->cqe_n = log2above(cq_info.cqe_cnt); + txq_data->cqe_s = 1 << txq_data->cqe_n; + txq_data->cqe_m = txq_data->cqe_s - 1; txq_data->qp_num_8s = tmpl.qp->qp_num << 8; txq_data->wqes = qp.sq.buf; txq_data->wqe_n = log2above(qp.sq.wqe_cnt); + txq_data->wqe_s = 1 << txq_data->wqe_n; + txq_data->wqe_m = txq_data->wqe_s - 1; + txq_data->wqes_end = txq_data->wqes + txq_data->wqe_s; txq_data->qp_db = &qp.dbrec[MLX5_SND_DBR]; txq_data->cq_db = cq_info.dbrec; - txq_data->cqes = - (volatile struct mlx5_cqe (*)[]) - (uintptr_t)cq_info.buf; + txq_data->cqes = (volatile struct mlx5_cqe *)cq_info.buf; txq_data->cq_ci = 0; #ifndef NDEBUG txq_data->cq_pi = 0; #endif txq_data->wqe_ci = 0; txq_data->wqe_pi = 0; + txq_data->wqe_comp = 0; + txq_data->wqe_thres = txq_data->wqe_s / MLX5_TX_COMP_THRESH_INLINE_DIV; +#ifdef HAVE_IBV_FLOW_DV_SUPPORT + /* + * If using DevX need to query and store TIS transport domain value. + * This is done once per port. + * Will use this value on Rx, when creating matching TIR. + */ + if (priv->config.devx && !priv->sh->tdn) { + ret = mlx5_devx_cmd_qp_query_tis_td(tmpl.qp, qp.tisn, + &priv->sh->tdn); + if (ret) { + DRV_LOG(ERR, "Fail to query port %u Tx queue %u QP TIS " + "transport domain", dev->data->port_id, idx); + rte_errno = EINVAL; + goto error; + } else { + DRV_LOG(DEBUG, "port %u Tx queue %u TIS number %d " + "transport domain %d", dev->data->port_id, + idx, qp.tisn, priv->sh->tdn); + } + } +#endif txq_ibv->qp = tmpl.qp; txq_ibv->cq = tmpl.cq; rte_atomic32_inc(&txq_ibv->refcnt); txq_ctrl->bf_reg = qp.bf.reg; - txq_ctrl->cqn = cq_info.cqn; txq_uar_init(txq_ctrl); if (qp.comp_mask & MLX5DV_QP_MASK_UAR_MMAP_OFFSET) { txq_ctrl->uar_mmap_offset = qp.uar_mmap_offset; @@ -685,7 +693,11 @@ txq_calc_wqebb_cnt(struct mlx5_txq_ctrl *txq_ctrl) unsigned int wqe_size; const unsigned int desc = 1 << txq_ctrl->txq.elts_n; - wqe_size = MLX5_WQE_SIZE + txq_ctrl->max_inline_data; + wqe_size = MLX5_WQE_CSEG_SIZE + + MLX5_WQE_ESEG_SIZE + + MLX5_WSEG_SIZE - + MLX5_ESEG_MIN_INLINE_SIZE + + txq_ctrl->max_inline_data; return rte_align32pow2(wqe_size * desc) / MLX5_WQE_SIZE; } @@ -700,84 +712,180 @@ txq_set_params(struct mlx5_txq_ctrl *txq_ctrl) { struct mlx5_priv *priv = txq_ctrl->priv; struct mlx5_dev_config *config = &priv->config; - const unsigned int max_tso_inline = - ((MLX5_MAX_TSO_HEADER + (RTE_CACHE_LINE_SIZE - 1)) / - RTE_CACHE_LINE_SIZE); - unsigned int txq_inline; - unsigned int txqs_inline; - unsigned int inline_max_packet_sz; - eth_tx_burst_t tx_pkt_burst = - mlx5_select_tx_function(ETH_DEV(priv)); - int is_empw_func = is_empw_burst_func(tx_pkt_burst); - int tso = !!(txq_ctrl->txq.offloads & (DEV_TX_OFFLOAD_TCP_TSO | - DEV_TX_OFFLOAD_VXLAN_TNL_TSO | - DEV_TX_OFFLOAD_GRE_TNL_TSO | - DEV_TX_OFFLOAD_IP_TNL_TSO | - DEV_TX_OFFLOAD_UDP_TNL_TSO)); - - txq_inline = (config->txq_inline == MLX5_ARG_UNSET) ? - 0 : config->txq_inline; - txqs_inline = (config->txqs_inline == MLX5_ARG_UNSET) ? - 0 : config->txqs_inline; - inline_max_packet_sz = - (config->inline_max_packet_sz == MLX5_ARG_UNSET) ? - 0 : config->inline_max_packet_sz; - if (is_empw_func) { - if (config->txq_inline == MLX5_ARG_UNSET) - txq_inline = MLX5_WQE_SIZE_MAX - MLX5_WQE_SIZE; - if (config->txqs_inline == MLX5_ARG_UNSET) - txqs_inline = MLX5_EMPW_MIN_TXQS; - if (config->inline_max_packet_sz == MLX5_ARG_UNSET) - inline_max_packet_sz = MLX5_EMPW_MAX_INLINE_LEN; - txq_ctrl->txq.mpw_hdr_dseg = config->mpw_hdr_dseg; - txq_ctrl->txq.inline_max_packet_sz = inline_max_packet_sz; - } - if (txq_inline && priv->txqs_n >= txqs_inline) { - unsigned int ds_cnt; - - txq_ctrl->txq.max_inline = - ((txq_inline + (RTE_CACHE_LINE_SIZE - 1)) / - RTE_CACHE_LINE_SIZE); - if (is_empw_func) { - /* To minimize the size of data set, avoid requesting - * too large WQ. + unsigned int inlen_send; /* Inline data for ordinary SEND.*/ + unsigned int inlen_empw; /* Inline data for enhanced MPW. */ + unsigned int inlen_mode; /* Minimal required Inline data. */ + unsigned int txqs_inline; /* Min Tx queues to enable inline. */ + uint64_t dev_txoff = priv->dev_data->dev_conf.txmode.offloads; + bool tso = txq_ctrl->txq.offloads & (DEV_TX_OFFLOAD_TCP_TSO | + DEV_TX_OFFLOAD_VXLAN_TNL_TSO | + DEV_TX_OFFLOAD_GRE_TNL_TSO | + DEV_TX_OFFLOAD_IP_TNL_TSO | + DEV_TX_OFFLOAD_UDP_TNL_TSO); + bool vlan_inline; + unsigned int temp; + + if (config->txqs_inline == MLX5_ARG_UNSET) + txqs_inline = +#if defined(RTE_ARCH_ARM64) + (priv->sh->pci_dev->id.device_id == + PCI_DEVICE_ID_MELLANOX_CONNECTX5BF) ? + MLX5_INLINE_MAX_TXQS_BLUEFIELD : +#endif + MLX5_INLINE_MAX_TXQS; + else + txqs_inline = (unsigned int)config->txqs_inline; + inlen_send = (config->txq_inline_max == MLX5_ARG_UNSET) ? + MLX5_SEND_DEF_INLINE_LEN : + (unsigned int)config->txq_inline_max; + inlen_empw = (config->txq_inline_mpw == MLX5_ARG_UNSET) ? + MLX5_EMPW_DEF_INLINE_LEN : + (unsigned int)config->txq_inline_mpw; + inlen_mode = (config->txq_inline_min == MLX5_ARG_UNSET) ? + 0 : (unsigned int)config->txq_inline_min; + if (config->mps != MLX5_MPW_ENHANCED) + inlen_empw = 0; + /* + * If there is requested minimal amount of data to inline + * we MUST enable inlining. This is a case for ConnectX-4 + * which usually requires L2 inlined for correct operating + * and ConnectX-4LX which requires L2-L4 inlined to + * support E-Switch Flows. + */ + if (inlen_mode) { + if (inlen_mode <= MLX5_ESEG_MIN_INLINE_SIZE) { + /* + * Optimize minimal inlining for single + * segment packets to fill one WQEBB + * without gaps. */ - txq_ctrl->max_inline_data = - ((RTE_MIN(txq_inline, - inline_max_packet_sz) + - (RTE_CACHE_LINE_SIZE - 1)) / - RTE_CACHE_LINE_SIZE) * RTE_CACHE_LINE_SIZE; + temp = MLX5_ESEG_MIN_INLINE_SIZE; } else { - txq_ctrl->max_inline_data = - txq_ctrl->txq.max_inline * RTE_CACHE_LINE_SIZE; + temp = inlen_mode - MLX5_ESEG_MIN_INLINE_SIZE; + temp = RTE_ALIGN(temp, MLX5_WSEG_SIZE) + + MLX5_ESEG_MIN_INLINE_SIZE; + temp = RTE_MIN(temp, MLX5_SEND_MAX_INLINE_LEN); } + if (temp != inlen_mode) { + DRV_LOG(INFO, + "port %u minimal required inline setting" + " aligned from %u to %u", + PORT_ID(priv), inlen_mode, temp); + inlen_mode = temp; + } + } + /* + * If port is configured to support VLAN insertion and device + * does not support this feature by HW (for NICs before ConnectX-5 + * or in case of wqe_vlan_insert flag is not set) we must enable + * data inline on all queues because it is supported by single + * tx_burst routine. + */ + txq_ctrl->txq.vlan_en = config->hw_vlan_insert; + vlan_inline = (dev_txoff & DEV_TX_OFFLOAD_VLAN_INSERT) && + !config->hw_vlan_insert; + if (vlan_inline) + inlen_send = RTE_MAX(inlen_send, MLX5_ESEG_MIN_INLINE_SIZE); + /* + * If there are few Tx queues it is prioritized + * to save CPU cycles and disable data inlining at all. + */ + if ((inlen_send && priv->txqs_n >= txqs_inline) || vlan_inline) { + /* + * The data sent with ordinal MLX5_OPCODE_SEND + * may be inlined in Ethernet Segment, align the + * length accordingly to fit entire WQEBBs. + */ + temp = (inlen_send / MLX5_WQE_SIZE) * MLX5_WQE_SIZE + + MLX5_ESEG_MIN_INLINE_SIZE + MLX5_WQE_DSEG_SIZE; + temp = RTE_MIN(temp, MLX5_WQE_SIZE_MAX + + MLX5_ESEG_MIN_INLINE_SIZE - + MLX5_WQE_CSEG_SIZE - + MLX5_WQE_ESEG_SIZE - + MLX5_WQE_DSEG_SIZE * 2); + temp = RTE_MIN(temp, MLX5_SEND_MAX_INLINE_LEN); + temp = RTE_MAX(temp, inlen_mode); + if (temp != inlen_send) { + DRV_LOG(INFO, + "port %u ordinary send inline setting" + " aligned from %u to %u", + PORT_ID(priv), inlen_send, temp); + inlen_send = temp; + } + /* + * Not aligned to cache lines, but to WQEs. + * First bytes of data (initial alignment) + * is going to be copied explicitly at the + * beginning of inlining buffer in Ethernet + * Segment. + */ + assert(inlen_send >= MLX5_ESEG_MIN_INLINE_SIZE); + assert(inlen_send <= MLX5_WQE_SIZE_MAX + + MLX5_ESEG_MIN_INLINE_SIZE - + MLX5_WQE_CSEG_SIZE - + MLX5_WQE_ESEG_SIZE - + MLX5_WQE_DSEG_SIZE * 2); + txq_ctrl->txq.inlen_send = inlen_send; + txq_ctrl->txq.inlen_mode = inlen_mode; + txq_ctrl->txq.inlen_empw = 0; + } else { + /* + * If minimal inlining is requested we must + * enable inlining in general, despite the + * number of configured queues. + */ + inlen_send = inlen_mode; + if (inlen_mode) { + /* + * Extend space for inline data to allow + * optional alignment of data buffer + * start address, it may improve PCIe + * performance. + */ + inlen_send = RTE_MIN(inlen_send + MLX5_WQE_SIZE, + MLX5_SEND_MAX_INLINE_LEN); + } + txq_ctrl->txq.inlen_send = inlen_send; + txq_ctrl->txq.inlen_mode = inlen_mode; + txq_ctrl->txq.inlen_empw = 0; + inlen_send = 0; + inlen_empw = 0; + } + if (inlen_send && inlen_empw && priv->txqs_n >= txqs_inline) { /* - * Check if the inline size is too large in a way which - * can make the WQE DS to overflow. - * Considering in calculation: - * WQE CTRL (1 DS) - * WQE ETH (1 DS) - * Inline part (N DS) + * The data sent with MLX5_OPCODE_ENHANCED_MPSW + * may be inlined in Data Segment, align the + * length accordingly to fit entire WQEBBs. */ - ds_cnt = 2 + (txq_ctrl->txq.max_inline / MLX5_WQE_DWORD_SIZE); - if (ds_cnt > MLX5_DSEG_MAX) { - unsigned int max_inline = (MLX5_DSEG_MAX - 2) * - MLX5_WQE_DWORD_SIZE; - - max_inline = max_inline - (max_inline % - RTE_CACHE_LINE_SIZE); - DRV_LOG(WARNING, - "port %u txq inline is too large (%d) setting" - " it to the maximum possible: %d\n", - PORT_ID(priv), txq_inline, max_inline); - txq_ctrl->txq.max_inline = max_inline / - RTE_CACHE_LINE_SIZE; + temp = (inlen_empw + MLX5_WQE_SIZE - 1) / MLX5_WQE_SIZE; + temp = temp * MLX5_WQE_SIZE + + MLX5_DSEG_MIN_INLINE_SIZE - MLX5_WQE_DSEG_SIZE; + temp = RTE_MIN(temp, MLX5_WQE_SIZE_MAX + + MLX5_DSEG_MIN_INLINE_SIZE - + MLX5_WQE_CSEG_SIZE - + MLX5_WQE_ESEG_SIZE - + MLX5_WQE_DSEG_SIZE); + temp = RTE_MIN(temp, MLX5_EMPW_MAX_INLINE_LEN); + if (temp != inlen_empw) { + DRV_LOG(INFO, + "port %u enhanced empw inline setting" + " aligned from %u to %u", + PORT_ID(priv), inlen_empw, temp); + inlen_empw = temp; } + assert(inlen_empw >= MLX5_ESEG_MIN_INLINE_SIZE); + assert(inlen_empw <= MLX5_WQE_SIZE_MAX + + MLX5_DSEG_MIN_INLINE_SIZE - + MLX5_WQE_CSEG_SIZE - + MLX5_WQE_ESEG_SIZE - + MLX5_WQE_DSEG_SIZE); + txq_ctrl->txq.inlen_empw = inlen_empw; } + txq_ctrl->max_inline_data = RTE_MAX(inlen_send, inlen_empw); if (tso) { - txq_ctrl->max_tso_header = max_tso_inline * RTE_CACHE_LINE_SIZE; - txq_ctrl->txq.max_inline = RTE_MAX(txq_ctrl->txq.max_inline, - max_tso_inline); + txq_ctrl->max_tso_header = MLX5_MAX_TSO_HEADER; + txq_ctrl->max_inline_data = RTE_MAX(txq_ctrl->max_inline_data, + MLX5_MAX_TSO_HEADER); txq_ctrl->txq.tso_en = 1; } txq_ctrl->txq.tunnel_en = config->tunnel_en | config->swp; @@ -832,6 +940,8 @@ mlx5_txq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc, tmpl->priv = priv; tmpl->socket = socket; tmpl->txq.elts_n = log2above(desc); + tmpl->txq.elts_s = desc; + tmpl->txq.elts_m = desc - 1; tmpl->txq.port_id = dev->data->port_id; tmpl->txq.idx = idx; txq_set_params(tmpl); @@ -845,8 +955,6 @@ mlx5_txq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc, rte_errno = ENOMEM; goto error; } - tmpl->txq.elts = - (struct rte_mbuf *(*)[1 << tmpl->txq.elts_n])(tmpl + 1); rte_atomic32_inc(&tmpl->refcnt); LIST_INSERT_HEAD(&priv->txqsctrl, tmpl, next); return tmpl;