X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=examples%2Fipsec-secgw%2Ftest%2Frun_test.sh;h=a91dade4fed77ff3b52cb36870f36bac3324e4b4;hb=e816f5ede5acb09f0eb6bf7c42837c4a0d9f77f2;hp=a6e363125e6aea96f04b59d3262b1c4156cfc4a6;hpb=8f60098858b9fa3e77003f33a8289c622675c272;p=dpdk.git

diff --git a/examples/ipsec-secgw/test/run_test.sh b/examples/ipsec-secgw/test/run_test.sh
old mode 100644
new mode 100755
index a6e363125e..a91dade4fe
--- a/examples/ipsec-secgw/test/run_test.sh
+++ b/examples/ipsec-secgw/test/run_test.sh
@@ -1,88 +1,242 @@
 #! /bin/bash
+# SPDX-License-Identifier: BSD-3-Clause
 
-# usage: /bin/bash run_test.sh [-46]
-# Run all defined linux_test[4,6].sh test-cases one by one
-# user has to setup properly the following environment variables:
-#  SGW_PATH - path to the ipsec-secgw binary to test
-#  REMOTE_HOST - ip/hostname of the DUT
-#  REMOTE_IFACE - iface name for the test-port on DUT
-#  ETH_DEV - ethernet device to be used on SUT by DPDK ('-w <pci-id>')
-# Also user can optonally setup:
-#  SGW_LCORE - lcore to run ipsec-secgw on (default value is 0)
-#  CRYPTO_DEV - crypto device to be used ('-w <pci-id>')
-#  if none specified appropriate vdevs will be created by the scrit
-# refer to linux_test1.sh for more information
-
-# All supported modes to test.
-# naming convention:
-# 'old' means that ipsec-secgw will run in legacy (non-librte_ipsec mode)
+# Usage: /bin/bash run_test.sh [-46miflscph] <ipsec_mode>
+# Run all defined linux_test.sh test-cases one by one
+# If <ipsec_mode> is specified, run only that test case
+# User has to setup properly the following environment variables:
+#  SGW_PATH	- path to the ipsec-secgw binary to test
+#  REMOTE_HOST	- ip/hostname of the DUT
+#  REMOTE_IFACE	- iface name for the test-port on DUT
+#  ETH_DEV	- ethernet device to be used on SUT by DPDK ('-a <pci-id>')
+# Also user can optionally setup:
+#  SGW_LCORE	- lcore to run ipsec-secgw on (default value is 0)
+#  CRYPTO_DEV	- crypto device to be used ('-a <pci-id>')
+#	       if none specified appropriate vdevs will be created by the script
+#  SGW_MULTI_SEG - ipsec-secgw option to enable reassembly support and
+#		specify size of reassembly table (i.e. SGW_MULTI_SEG=128)
+# Refer to linux_test.sh for more information
+
+# All supported modes to test:
+#  trs_3descbc_sha1
+#  trs_aescbc_sha1
+#  trs_aesctr_sha1
+#  trs_aesgcm
+#  tun_3descbc_sha1
+#  tun_aescbc_sha1
+#  tun_aesctr_sha1
+#  tun_aesgcm
+# Naming convention:
 # 'tun/trs' refer to tunnel/transport mode respectively
-LINUX_TEST="tun_aescbc_sha1 \
-tun_aescbc_sha1_esn \
-tun_aescbc_sha1_esn_atom \
-tun_aesgcm \
-tun_aesgcm_esn \
-tun_aesgcm_esn_atom \
+
+usage()
+{
+	echo "Usage:"
+	echo -e "\t$0 -[46miflscph] <ipsec_mode>"
+	echo -e "\t\t-4 Perform Linux IPv4 network tests"
+	echo -e "\t\t-6 Perform Linux IPv6 network tests"
+	echo -e "\t\t-m Add mixed IP protocol tests to IPv4/IPv6 \
+(only with option [-46])"
+	echo -e "\t\t-i Run inline tests (only with option [-46])"
+	echo -e "\t\t-f Run fallback tests (only with option [-46])"
+	echo -e "\t\t-l Run tests in legacy mode"
+	echo -e "\t\t-s Run all tests with reassembly support \
+(on default only fallback tests use reassembly support)"
+	echo -e "\t\t-c Run tests with use of cpu-crypto \
+(on default lookaside-none is used)"
+	echo -e "\t\t-p Perform packet validation tests"
+	echo -e "\t\t-h Display this help"
+	echo -e "\t\t<ipsec_mode> Run only specified test case i.e. tun_aesgcm"
+}
+
+LINUX_TEST="trs_3descbc_sha1 \
 trs_aescbc_sha1 \
-trs_aescbc_sha1_esn \
-trs_aescbc_sha1_esn_atom \
+trs_aesctr_sha1 \
 trs_aesgcm \
-trs_aesgcm_esn \
-trs_aesgcm_esn_atom \
-tun_aescbc_sha1_old \
-tun_aesgcm_old \
-trs_aescbc_sha1_old \
-trs_aesgcm_old \
+tun_3descbc_sha1 \
+tun_aescbc_sha1 \
 tun_aesctr_sha1 \
-tun_aesctr_sha1_old \
-tun_aesctr_sha1_esn \
-tun_aesctr_sha1_esn_atom \
-trs_aesctr_sha1 \
-trs_aesctr_sha1_old \
-trs_aesctr_sha1_esn \
-trs_aesctr_sha1_esn_atom"
+tun_aesgcm"
 
-DIR=`dirname $0`
+LINUX_TEST_INLINE_FALLBACK="trs_aesgcm \
+tun_aesgcm"
+
+LINUX_TEST_RUN=""
+
+PKT_TESTS="trs_ipv6opts \
+tun_null_header_reconstruct"
+
+DIR=$(dirname $0)
 
 # get input options
-st=0
 run4=0
 run6=0
-while [[ ${st} -eq 0 ]]; do
-	getopts ":46" opt
-	st=$?
-	if [[ "${opt}" == "4" ]]; then
-		run4=1
-	elif [[ "${opt}" == "6" ]]; then
-		run6=1
-	fi
+runpkt=0
+mixed=0
+inline=0
+fallback=0
+legacy=0
+multi_seg=0
+cpu_crypto=0
+options=""
+while getopts ":46miflscph" opt
+do
+	case $opt in
+		4)
+			run4=1
+			;;
+		6)
+			run6=1
+			;;
+		m)
+			mixed=1
+			;;
+		i)
+			inline=1
+			;;
+		f)
+			fallback=1
+			;;
+		l)
+			legacy=1
+			options="${options} -l"
+			;;
+		s)
+			multi_seg=1
+			options="${options} -s"
+			;;
+		c)
+			cpu_crypto=1
+			options="${options} -c"
+			;;
+		p)
+			runpkt=1
+			;;
+		h)
+			usage
+			exit 0
+			;;
+		?)
+			echo "Invalid option"
+			usage
+			exit 127
+			;;
+	esac
 done
 
-if [[ ${run4} -eq 0 && {run6} -eq 0 ]]; then
+shift $((OPTIND -1))
+LINUX_TEST_RUN=$*
+
+# no test suite has been selected
+if [[ ${run4} -eq 0 && ${run6} -eq 0 && ${runpkt} -eq 0 ]]; then
+	usage
 	exit 127
 fi
 
-for i in ${LINUX_TEST}; do
+# check parameters
+if [[ ${legacy} -eq 1 ]] && [[ ${multi_seg} -eq 1 || ${fallback} -eq 1 \
+   || ${cpu_crypto} -eq 1 ]]; then
+	echo "Fallback/reassembly/cpu-crypto cannot be used with legacy mode"
+	exit 127
+fi
 
-	echo "starting test ${i}"
+if [[ ${cpu_crypto} -eq 1 && ${inline} -eq 1 && ${fallback} -eq 0 ]]; then
+	echo "cpu-crypto cannot be used with inline mode"
+	exit 127
+fi
 
-	st4=0
-	if [[ ${run4} -ne 0 ]]; then
-		/bin/bash ${DIR}/linux_test4.sh ${i}
-		st4=$?
-		echo "test4 ${i} finished with status ${st4}"
+# perform packet processing validation tests
+st=0
+if [ $runpkt -eq 1 ]; then
+	echo "Performing packet validation tests"
+	/bin/bash ${DIR}/pkttest.sh ${PKT_TESTS}
+	st=$?
+
+	echo "pkttests finished with status ${st}"
+	if [[ ${st} -ne 0 ]]; then
+		echo "ERROR pkttests FAILED"
+		exit ${st}
 	fi
+fi
+
+desc=""
 
-	st6=0
-	if [[ ${run6} -ne 0 ]]; then
-		/bin/bash ${DIR}/linux_test6.sh ${i}
-		st6=$?
-		echo "test6 ${i} finished with status ${st6}"
+# set inline/fallback tests if needed
+if [[ ${inline} -eq 1  || ${fallback} -eq 1 ]]; then
+
+	# add inline option if needed
+	if [[ ${inline} -eq 1 ]]; then
+		options="${options} -i"
+		desc="inline"
+	fi
+	# add fallback option if needed
+	if [[ ${fallback} -eq 1 ]]; then
+		options="${options} -f"
+		if [[ "${desc}" == "inline" ]]; then
+			desc="${desc} and fallback"
+		else
+			desc="fallback"
+		fi
 	fi
 
-	let "st = st4 + st6"
-	if [[ $st -ne 0 ]]; then
-		echo "ERROR test ${i} FAILED"
-		exit $st
+	# select tests to run
+	if [[ -z "${LINUX_TEST_RUN}" ]]; then
+		LINUX_TEST_RUN="${LINUX_TEST_INLINE_FALLBACK}"
 	fi
-done
+else
+	options="${options} -r"
+fi
+
+# select tests to run
+if [[ -z "${LINUX_TEST_RUN}" ]]; then
+	LINUX_TEST_RUN="${LINUX_TEST}"
+fi
+
+# perform selected tests
+if [[ ${run4} -eq 1 || ${run6} -eq 1 ]] ; then
+
+	for i in ${LINUX_TEST_RUN}; do
+
+		echo "starting ${desc} test ${i}"
+
+		st4=0
+		st4m=0
+		if [[ ${run4} -ne 0 ]]; then
+			/bin/bash ${DIR}/load_env.sh ${options} ipv4-ipv4 ${i}
+			st4=$?
+			echo "${desc} test IPv4 ${i} finished with status \
+${st4}"
+			if [[ ${mixed} -ne 0 ]] && [[ "${i}" == tun* ]]; then
+				/bin/bash ${DIR}/load_env.sh ${options} \
+				ipv4-ipv6 ${i}
+				st4m=$?
+				echo "${desc} test IPv4-IPv6 ${i} finished with\
+ status ${st4m}"
+			fi
+		fi
+
+		st6=0
+		st6m=0
+		if [[ ${run6} -ne 0 ]]; then
+			/bin/bash ${DIR}/load_env.sh ${options} ipv6-ipv6 ${i}
+			st6=$?
+			echo "${desc} test IPv6 ${i} finished with status \
+${st6}"
+			if [[ ${mixed} -ne 0 ]] && [[ "${i}" == tun* ]]; then
+				/bin/bash ${DIR}/load_env.sh ${options} \
+				ipv6-ipv4 ${i}
+				st6m=$?
+				echo "${desc} test IPv6-IPv4 ${i} finished with\
+ status ${st6m}"
+			fi
+		fi
+
+		let "st = st4 + st6 + st4m + st6m"
+		if [[ $st -ne 0 ]]; then
+			echo "ERROR ${desc} test ${i} FAILED"
+			exit $st
+		fi
+	done
+fi
+
+echo "All tests have ended successfully"