X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=examples%2Fl3fwd-power%2Fmain.c;h=12e4fd6b669e58758c9785473f21ee3ca921ad16;hb=af4f2c5feb2e;hp=57fc3716b2cf041495111d245447b11944580c3c;hpb=6f41fe75e2dd8dd38f7bea7b9501edd4f9b72fa5;p=dpdk.git

diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
index 57fc3716b2..12e4fd6b66 100644
--- a/examples/l3fwd-power/main.c
+++ b/examples/l3fwd-power/main.c
@@ -140,25 +140,6 @@
 	nb_lcores*MEMPOOL_CACHE_SIZE), \
 	(unsigned)8192)
 
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0  /**< Default values of TX host threshold reg. */
-#define TX_WTHRESH 0  /**< Default values of TX write-back threshold reg. */
-
 #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
 
 #define NB_SOCKETS 8
@@ -255,26 +236,6 @@ static struct rte_eth_conf port_conf = {
 	},
 };
 
-static const struct rte_eth_rxconf rx_conf = {
-	.rx_thresh = {
-		.pthresh = RX_PTHRESH,
-		.hthresh = RX_HTHRESH,
-		.wthresh = RX_WTHRESH,
-	},
-	.rx_free_thresh = 32,
-};
-
-static const struct rte_eth_txconf tx_conf = {
-	.tx_thresh = {
-		.pthresh = TX_PTHRESH,
-		.hthresh = TX_HTHRESH,
-		.wthresh = TX_WTHRESH,
-	},
-	.tx_free_thresh = 0, /* Use PMD default values */
-	.tx_rs_thresh = 0, /* Use PMD default values */
-	.txq_flags = 0x0,
-};
-
 static struct rte_mempool * pktmbuf_pool[NB_SOCKETS];
 
 
@@ -687,7 +648,7 @@ l3fwd_simple_forward(struct rte_mbuf *m, uint8_t portid,
 
 #ifdef DO_RFC_1812_CHECKS
 		/* Check to make sure the packet is valid (RFC1812) */
-		if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt.pkt_len) < 0) {
+		if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt_len) < 0) {
 			rte_pktmbuf_free(m);
 			return;
 		}
@@ -1513,6 +1474,8 @@ int
 MAIN(int argc, char **argv)
 {
 	struct lcore_conf *qconf;
+	struct rte_eth_dev_info dev_info;
+	struct rte_eth_txconf *txconf;
 	int ret;
 	unsigned nb_ports;
 	uint16_t queueid;
@@ -1547,9 +1510,6 @@ MAIN(int argc, char **argv)
 		rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
 
 
-	if (rte_eal_pci_probe() < 0)
-		rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
-
 	nb_ports = rte_eth_dev_count();
 	if (nb_ports > RTE_MAX_ETHPORTS)
 		nb_ports = RTE_MAX_ETHPORTS;
@@ -1606,8 +1566,13 @@ MAIN(int argc, char **argv)
 
 			printf("txq=%u,%d,%d ", lcore_id, queueid, socketid);
 			fflush(stdout);
+
+			rte_eth_dev_info_get(portid, &dev_info);
+			txconf = &dev_info.default_txconf;
+			if (port_conf.rxmode.jumbo_frame)
+				txconf->txq_flags = 0;
 			ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
-						     socketid, &tx_conf);
+						     socketid, txconf);
 			if (ret < 0)
 				rte_exit(EXIT_FAILURE,
 					"rte_eth_tx_queue_setup: err=%d, "
@@ -1655,7 +1620,8 @@ MAIN(int argc, char **argv)
 			fflush(stdout);
 
 			ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
-				socketid, &rx_conf, pktmbuf_pool[socketid]);
+				socketid, NULL,
+				pktmbuf_pool[socketid]);
 			if (ret < 0)
 				rte_exit(EXIT_FAILURE,
 					"rte_eth_rx_queue_setup: err=%d, "