X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=examples%2Fl3fwd-vf%2Fmain.c;h=896ceb317ca813b2c86b464bbd0404bcfbbee722;hb=3031749c2df04a63cdcef186dcce3781e61436e8;hp=79c30a83bf42046a660d2f28450a710c6982e105;hpb=cdfd5dbb90b05e198b436f97f0ba320d7cd7d8ad;p=dpdk.git diff --git a/examples/l3fwd-vf/main.c b/examples/l3fwd-vf/main.c index 79c30a83bf..896ceb317c 100644 --- a/examples/l3fwd-vf/main.c +++ b/examples/l3fwd-vf/main.c @@ -1,35 +1,34 @@ /*- * BSD LICENSE - * - * Copyright(c) 2010-2013 Intel Corporation. All rights reserved. + * + * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions * are met: - * - * * Redistributions of source code must retain the above copyright + * + * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * */ #include @@ -42,6 +41,7 @@ #include #include #include +#include #include #include @@ -94,8 +94,22 @@ #define RTE_LOGTYPE_L3FWD RTE_LOGTYPE_USER1 +#define MEMPOOL_CACHE_SIZE 256 + #define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM) -#define NB_MBUF 8192 + +/* + * This expression is used to calculate the number of mbufs needed depending on user input, taking + * into account memory for rx and tx hardware rings, cache per lcore and mtable per port per lcore. + * RTE_MAX is used to ensure that NB_MBUF never goes below a minimum value of 8192 + */ + +#define NB_MBUF RTE_MAX ( \ + (nb_ports*nb_rx_queue*RTE_TEST_RX_DESC_DEFAULT + \ + nb_ports*nb_lcores*MAX_PKT_BURST + \ + nb_ports*n_tx_queue*RTE_TEST_TX_DESC_DEFAULT + \ + nb_lcores*MEMPOOL_CACHE_SIZE), \ + (unsigned)8192) /* * RX and TX Prefetch, Host, and Write-back threshold values should be @@ -181,12 +195,14 @@ static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) / static struct rte_eth_conf port_conf = { .rxmode = { + .mq_mode = ETH_MQ_RX_RSS, + .max_rx_pkt_len = ETHER_MAX_LEN, .split_hdr_size = 0, .header_split = 0, /**< Header Split disabled */ .hw_ip_checksum = 1, /**< IP checksum offload enabled */ .hw_vlan_filter = 0, /**< VLAN filtering disabled */ .jumbo_frame = 0, /**< Jumbo Frame Support disabled */ - .hw_strip_crc = 1, /**< CRC stripped by hardware */ + .hw_strip_crc = 0, /**< CRC stripped by hardware */ }, .rx_adv_conf = { .rss_conf = { @@ -205,6 +221,7 @@ static const struct rte_eth_rxconf rx_conf = { .hthresh = RX_HTHRESH, .wthresh = RX_WTHRESH, }, + .rx_free_thresh = 32, }; static const struct rte_eth_txconf tx_conf = { @@ -215,6 +232,11 @@ static const struct rte_eth_txconf tx_conf = { }, .tx_free_thresh = 0, /* Use PMD default values */ .tx_rs_thresh = 0, /* Use PMD default values */ + .txq_flags = (ETH_TXQ_FLAGS_NOMULTSEGS | + ETH_TXQ_FLAGS_NOVLANOFFL | + ETH_TXQ_FLAGS_NOXSUMSCTP | + ETH_TXQ_FLAGS_NOXSUMUDP | + ETH_TXQ_FLAGS_NOXSUMTCP) }; static struct rte_mempool * pktmbuf_pool[NB_SOCKETS]; @@ -678,6 +700,24 @@ print_usage(const char *prgname) prgname); } +/* Custom handling of signals to handle process terminal */ +static void +signal_handler(int signum) +{ + uint8_t portid; + uint8_t nb_ports = rte_eth_dev_count(); + + /* When we receive a SIGINT signal */ + if (signum == SIGINT) { + for (portid = 0; portid < nb_ports; portid++) { + /* skip ports that are not enabled */ + if ((enabled_port_mask & (1 << portid)) == 0) + continue; + rte_eth_dev_close(portid); + } + } + rte_exit(EXIT_SUCCESS, "\n User forced exit\n"); +} static int parse_portmask(const char *portmask) { @@ -889,7 +929,7 @@ setup_lpm(int socketid) #endif static int -init_mem(void) +init_mem(unsigned nb_mbuf) { struct lcore_conf *qconf; int socketid; @@ -912,7 +952,8 @@ init_mem(void) if (pktmbuf_pool[socketid] == NULL) { rte_snprintf(s, sizeof(s), "mbuf_pool_%d", socketid); pktmbuf_pool[socketid] = - rte_mempool_create(s, NB_MBUF, MBUF_SIZE, 32, + rte_mempool_create(s, nb_mbuf, MBUF_SIZE, + MEMPOOL_CACHE_SIZE, sizeof(struct rte_pktmbuf_pool_private), rte_pktmbuf_pool_init, NULL, rte_pktmbuf_init, NULL, @@ -942,8 +983,11 @@ MAIN(int argc, char **argv) unsigned nb_ports; uint16_t queueid; unsigned lcore_id; + uint32_t nb_lcores; + uint16_t n_tx_queue; uint8_t portid, nb_rx_queue, queue, socketid; + signal(SIGINT, signal_handler); /* init EAL */ ret = rte_eal_init(argc, argv); if (ret < 0) @@ -963,14 +1007,6 @@ MAIN(int argc, char **argv) if (ret < 0) rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n"); - ret = init_mem(); - if (ret < 0) - rte_exit(EXIT_FAILURE, "init_mem failed\n"); - - /* init driver */ - if (rte_pmd_init_all() < 0) - rte_exit(EXIT_FAILURE, "Cannot init pmd\n"); - if (rte_eal_pci_probe() < 0) rte_exit(EXIT_FAILURE, "Cannot probe PCI\n"); @@ -981,6 +1017,8 @@ MAIN(int argc, char **argv) if (check_port_config(nb_ports) < 0) rte_exit(EXIT_FAILURE, "check_port_config failed\n"); + nb_lcores = rte_lcore_count(); + /* initialize all ports */ for (portid = 0; portid < nb_ports; portid++) { /* skip ports that are not enabled */ @@ -995,10 +1033,11 @@ MAIN(int argc, char **argv) /* must always equal(=1) */ nb_rx_queue = get_port_n_rx_queues(portid); + n_tx_queue = MAX_TX_QUEUE_PER_PORT; printf("Creating queues: nb_rxq=%d nb_txq=%u... ", nb_rx_queue, (unsigned)1 ); - ret = rte_eth_dev_configure(portid, nb_rx_queue, 1, &port_conf); + ret = rte_eth_dev_configure(portid, nb_rx_queue, n_tx_queue, &port_conf); if (ret < 0) rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%d\n", ret, portid); @@ -1007,10 +1046,14 @@ MAIN(int argc, char **argv) print_ethaddr(" Address:", &ports_eth_addr[portid]); printf(", "); + ret = init_mem(NB_MBUF); + if (ret < 0) + rte_exit(EXIT_FAILURE, "init_mem failed\n"); + /* init one TX queue */ - socketid = 0; + socketid = (uint8_t)rte_lcore_to_socket_id(rte_get_master_lcore()); - printf("txq=%d,%d ", 0, socketid); + printf("txq=%d,%d,%d ", portid, 0, socketid); fflush(stdout); ret = rte_eth_tx_queue_setup(portid, 0, nb_txd, socketid, &tx_conf);