X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_eal%2Flinuxapp%2Feal%2Feal_vfio.h;h=5ff63e5d7579c79a3eefe5d40a2cfccf4f801ddb;hb=9cdbd44ea94020f1b28b1407b73f2a34bc424a4f;hp=b2b0d27fe2c29fd431d0f0ec02767e4249188908;hpb=73983b2bdae8a285c3cca3bbd18a7e965c3f1cca;p=dpdk.git

diff --git a/lib/librte_eal/linuxapp/eal/eal_vfio.h b/lib/librte_eal/linuxapp/eal/eal_vfio.h
index b2b0d27fe2..5ff63e5d75 100644
--- a/lib/librte_eal/linuxapp/eal/eal_vfio.h
+++ b/lib/librte_eal/linuxapp/eal/eal_vfio.h
@@ -54,6 +54,62 @@
 
 #define RTE_VFIO_TYPE1 VFIO_TYPE1_IOMMU
 
+#ifndef VFIO_SPAPR_TCE_v2_IOMMU
+#define RTE_VFIO_SPAPR 7
+#define VFIO_IOMMU_SPAPR_REGISTER_MEMORY _IO(VFIO_TYPE, VFIO_BASE + 17)
+#define VFIO_IOMMU_SPAPR_TCE_CREATE _IO(VFIO_TYPE, VFIO_BASE + 19)
+#define VFIO_IOMMU_SPAPR_TCE_REMOVE _IO(VFIO_TYPE, VFIO_BASE + 20)
+
+struct vfio_iommu_spapr_register_memory {
+	uint32_t argsz;
+	uint32_t flags;
+	uint64_t vaddr;
+	uint64_t size;
+};
+
+struct vfio_iommu_spapr_tce_create {
+	uint32_t argsz;
+	uint32_t flags;
+	/* in */
+	uint32_t page_shift;
+	uint32_t __resv1;
+	uint64_t window_size;
+	uint32_t levels;
+	uint32_t __resv2;
+	/* out */
+	uint64_t start_addr;
+};
+
+struct vfio_iommu_spapr_tce_remove {
+	uint32_t argsz;
+	uint32_t flags;
+	/* in */
+	uint64_t start_addr;
+};
+
+struct vfio_iommu_spapr_tce_ddw_info {
+	uint64_t pgsizes;
+	uint32_t max_dynamic_windows_supported;
+	uint32_t levels;
+};
+
+/* SPAPR_v2 is not present, but SPAPR might be */
+#ifndef VFIO_SPAPR_TCE_IOMMU
+#define VFIO_IOMMU_SPAPR_TCE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12)
+
+struct vfio_iommu_spapr_tce_info {
+	uint32_t argsz;
+	uint32_t flags;
+	uint32_t dma32_window_start;
+	uint32_t dma32_window_size;
+	struct vfio_iommu_spapr_tce_ddw_info ddw;
+};
+#endif /* VFIO_SPAPR_TCE_IOMMU */
+
+#else /* VFIO_SPAPR_TCE_v2_IOMMU */
+#define RTE_VFIO_SPAPR VFIO_SPAPR_TCE_v2_IOMMU
+#endif
+
 #if LINUX_VERSION_CODE < KERNEL_VERSION(4, 5, 0)
 #define RTE_VFIO_NOIOMMU 8
 #else
@@ -78,13 +134,13 @@ int vfio_mp_sync_connect_to_primary(void);
 struct vfio_group {
 	int group_no;
 	int fd;
+	int devices;
 };
 
 struct vfio_config {
 	int vfio_enabled;
 	int vfio_container_fd;
-	int vfio_container_has_dma;
-	int vfio_group_idx;
+	int vfio_active_groups;
 	struct vfio_group vfio_groups[VFIO_MAX_GROUPS];
 };
 
@@ -130,6 +186,10 @@ vfio_get_group_no(const char *sysfs_base,
 int
 vfio_get_group_fd(int iommu_group_no);
 
+/* remove group fd from internal VFIO group fd array */
+int
+clear_group(int vfio_group_fd);
+
 /**
  * Setup vfio_cfg for the device identified by its address. It discovers
  * the configured I/O MMU groups or sets a new one for the device. If a new
@@ -140,22 +200,19 @@ vfio_get_group_fd(int iommu_group_no);
 int vfio_setup_device(const char *sysfs_base, const char *dev_addr,
 		int *vfio_dev_fd, struct vfio_device_info *device_info);
 
+int vfio_release_device(const char *sysfs_base, const char *dev_addr, int fd);
+
 int vfio_enable(const char *modname);
 int vfio_is_enabled(const char *modname);
 
-int vfio_type1_dma_map(int);
-int vfio_noiommu_dma_map(int);
+int pci_vfio_enable(void);
+int pci_vfio_is_enabled(void);
 
-/* IOMMU types we support */
-static const struct vfio_iommu_type iommu_types[] = {
-	/* x86 IOMMU, otherwise known as type 1 */
-	{ RTE_VFIO_TYPE1, "Type 1", &vfio_type1_dma_map},
-	/* IOMMU-less mode */
-	{ RTE_VFIO_NOIOMMU, "No-IOMMU", &vfio_noiommu_dma_map},
-};
+int vfio_mp_sync_setup(void);
 
 #define SOCKET_REQ_CONTAINER 0x100
 #define SOCKET_REQ_GROUP 0x200
+#define SOCKET_CLR_GROUP 0x300
 #define SOCKET_OK 0x0
 #define SOCKET_NO_FD 0x1
 #define SOCKET_ERR 0xFF