X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_eal%2Flinuxapp%2Figb_uio%2Figb_uio.c;h=fd320d87d5c25cd4f3fadba56bb4f9d91d29f2b6;hb=d5c7a09edbe709b50ecde4269b80b9a07627c876;hp=47ff2f3f907bf2563b6097fd73f78645fd15381a;hpb=6573369dd735c43930bfddec34124da05b1584df;p=dpdk.git

diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
index 47ff2f3f90..fd320d87d5 100644
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
@@ -29,25 +29,15 @@
 #include <linux/pci.h>
 #include <linux/uio_driver.h>
 #include <linux/io.h>
+#include <linux/irq.h>
 #include <linux/msi.h>
 #include <linux/version.h>
+#include <linux/slab.h>
 
-#ifdef CONFIG_XEN_DOM0
-#include <xen/xen.h>
-#endif
 #include <rte_pci_dev_features.h>
 
 #include "compat.h"
 
-#ifdef RTE_PCI_CONFIG
-#define PCI_SYS_FILE_BUF_SIZE      10
-#define PCI_DEV_CAP_REG            0xA4
-#define PCI_DEV_CTRL_REG           0xA8
-#define PCI_DEV_CAP_EXT_TAG_MASK   0x20
-#define PCI_DEV_CTRL_EXT_TAG_SHIFT 8
-#define PCI_DEV_CTRL_EXT_TAG_MASK  (1 << PCI_DEV_CTRL_EXT_TAG_SHIFT)
-#endif
-
 /**
  * A structure describing the private information for a uio device.
  */
@@ -57,22 +47,14 @@ struct rte_uio_pci_dev {
 	enum rte_intr_mode mode;
 };
 
-static char *intr_mode = NULL;
+static char *intr_mode;
 static enum rte_intr_mode igbuio_intr_mode_preferred = RTE_INTR_MODE_MSIX;
-
-static inline struct rte_uio_pci_dev *
-igbuio_get_uio_pci_dev(struct uio_info *info)
-{
-	return container_of(info, struct rte_uio_pci_dev, info);
-}
-
 /* sriov sysfs */
 static ssize_t
 show_max_vfs(struct device *dev, struct device_attribute *attr,
 	     char *buf)
 {
-	return snprintf(buf, 10, "%u\n",
-			pci_num_vf(container_of(dev, struct pci_dev, dev)));
+	return snprintf(buf, 10, "%u\n", dev_num_vf(dev));
 }
 
 static ssize_t
@@ -81,7 +63,7 @@ store_max_vfs(struct device *dev, struct device_attribute *attr,
 {
 	int err = 0;
 	unsigned long max_vfs;
-	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
 
 	if (0 != kstrtoul(buf, 0, &max_vfs))
 		return -EINVAL;
@@ -96,123 +78,26 @@ store_max_vfs(struct device *dev, struct device_attribute *attr,
 	return err ? err : count;
 }
 
-#ifdef RTE_PCI_CONFIG
-static ssize_t
-show_extended_tag(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct pci_dev *pci_dev = container_of(dev, struct pci_dev, dev);
-	uint32_t val = 0;
-
-	pci_read_config_dword(pci_dev, PCI_DEV_CAP_REG, &val);
-	if (!(val & PCI_DEV_CAP_EXT_TAG_MASK)) /* Not supported */
-		return snprintf(buf, PCI_SYS_FILE_BUF_SIZE, "%s\n", "invalid");
-
-	val = 0;
-	pci_bus_read_config_dword(pci_dev->bus, pci_dev->devfn,
-					PCI_DEV_CTRL_REG, &val);
-
-	return snprintf(buf, PCI_SYS_FILE_BUF_SIZE, "%s\n",
-		(val & PCI_DEV_CTRL_EXT_TAG_MASK) ? "on" : "off");
-}
-
-static ssize_t
-store_extended_tag(struct device *dev,
-		   struct device_attribute *attr,
-		   const char *buf,
-		   size_t count)
-{
-	struct pci_dev *pci_dev = container_of(dev, struct pci_dev, dev);
-	uint32_t val = 0, enable;
-
-	if (strncmp(buf, "on", 2) == 0)
-		enable = 1;
-	else if (strncmp(buf, "off", 3) == 0)
-		enable = 0;
-	else
-		return -EINVAL;
-
-	pci_cfg_access_lock(pci_dev);
-	pci_bus_read_config_dword(pci_dev->bus, pci_dev->devfn,
-					PCI_DEV_CAP_REG, &val);
-	if (!(val & PCI_DEV_CAP_EXT_TAG_MASK)) { /* Not supported */
-		pci_cfg_access_unlock(pci_dev);
-		return -EPERM;
-	}
-
-	val = 0;
-	pci_bus_read_config_dword(pci_dev->bus, pci_dev->devfn,
-					PCI_DEV_CTRL_REG, &val);
-	if (enable)
-		val |= PCI_DEV_CTRL_EXT_TAG_MASK;
-	else
-		val &= ~PCI_DEV_CTRL_EXT_TAG_MASK;
-	pci_bus_write_config_dword(pci_dev->bus, pci_dev->devfn,
-					PCI_DEV_CTRL_REG, val);
-	pci_cfg_access_unlock(pci_dev);
-
-	return count;
-}
-
-static ssize_t
-show_max_read_request_size(struct device *dev,
-			   struct device_attribute *attr,
-			   char *buf)
-{
-	struct pci_dev *pci_dev = container_of(dev, struct pci_dev, dev);
-	int val = pcie_get_readrq(pci_dev);
-
-	return snprintf(buf, PCI_SYS_FILE_BUF_SIZE, "%d\n", val);
-}
-
-static ssize_t
-store_max_read_request_size(struct device *dev,
-			    struct device_attribute *attr,
-			    const char *buf,
-			    size_t count)
-{
-	struct pci_dev *pci_dev = container_of(dev, struct pci_dev, dev);
-	unsigned long size = 0;
-	int ret;
-
-	if (0 != kstrtoul(buf, 0, &size))
-		return -EINVAL;
-
-	ret = pcie_set_readrq(pci_dev, (int)size);
-	if (ret < 0)
-		return ret;
-
-	return count;
-}
-#endif
-
 static DEVICE_ATTR(max_vfs, S_IRUGO | S_IWUSR, show_max_vfs, store_max_vfs);
-#ifdef RTE_PCI_CONFIG
-static DEVICE_ATTR(extended_tag, S_IRUGO | S_IWUSR, show_extended_tag,
-	store_extended_tag);
-static DEVICE_ATTR(max_read_request_size, S_IRUGO | S_IWUSR,
-	show_max_read_request_size, store_max_read_request_size);
-#endif
 
 static struct attribute *dev_attrs[] = {
 	&dev_attr_max_vfs.attr,
-#ifdef RTE_PCI_CONFIG
-	&dev_attr_extended_tag.attr,
-	&dev_attr_max_read_request_size.attr,
-#endif
 	NULL,
 };
 
 static const struct attribute_group dev_attr_grp = {
 	.attrs = dev_attrs,
 };
+
+#ifndef HAVE_PCI_MSI_MASK_IRQ
 /*
  * It masks the msix on/off of generating MSI-X messages.
  */
 static void
-igbuio_msix_mask_irq(struct msi_desc *desc, int32_t state)
+igbuio_msix_mask_irq(struct msi_desc *desc, s32 state)
 {
 	u32 mask_bits = desc->masked;
-	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
+	unsigned int offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
 						PCI_MSIX_ENTRY_VECTOR_CTRL;
 
 	if (state != 0)
@@ -227,6 +112,52 @@ igbuio_msix_mask_irq(struct msi_desc *desc, int32_t state)
 	}
 }
 
+/*
+ * It masks the msi on/off of generating MSI messages.
+ */
+static void
+igbuio_msi_mask_irq(struct pci_dev *pdev, struct msi_desc *desc, int32_t state)
+{
+	u32 mask_bits = desc->masked;
+	u32 offset = desc->irq - pdev->irq;
+	u32 mask = 1 << offset;
+
+	if (!desc->msi_attrib.maskbit)
+		return;
+
+	if (state != 0)
+		mask_bits &= ~mask;
+	else
+		mask_bits |= mask;
+
+	if (mask_bits != desc->masked) {
+		pci_write_config_dword(pdev, desc->mask_pos, mask_bits);
+		desc->masked = mask_bits;
+	}
+}
+
+static void
+igbuio_mask_irq(struct pci_dev *pdev, enum rte_intr_mode mode, s32 irq_state)
+{
+	struct msi_desc *desc;
+	struct list_head *msi_list;
+
+#ifdef HAVE_MSI_LIST_IN_GENERIC_DEVICE
+	msi_list = &pdev->dev.msi_list;
+#else
+	msi_list = &pdev->msi_list;
+#endif
+
+	if (mode == RTE_INTR_MODE_MSIX) {
+		list_for_each_entry(desc, msi_list, list)
+			igbuio_msix_mask_irq(desc, irq_state);
+	} else if (mode == RTE_INTR_MODE_MSI) {
+		list_for_each_entry(desc, msi_list, list)
+			igbuio_msi_mask_irq(pdev, desc, irq_state);
+	}
+}
+#endif
+
 /**
  * This is the irqcontrol callback to be registered to uio_info.
  * It can be used to disable/enable interrupt from user space processes.
@@ -243,19 +174,29 @@ igbuio_msix_mask_irq(struct msi_desc *desc, int32_t state)
 static int
 igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state)
 {
-	struct rte_uio_pci_dev *udev = igbuio_get_uio_pci_dev(info);
+	struct rte_uio_pci_dev *udev = info->priv;
 	struct pci_dev *pdev = udev->pdev;
 
+#ifdef HAVE_PCI_MSI_MASK_IRQ
+	struct irq_data *irq = irq_get_irq_data(udev->info.irq);
+#endif
+
 	pci_cfg_access_lock(pdev);
+
+	if (udev->mode == RTE_INTR_MODE_MSIX || udev->mode == RTE_INTR_MODE_MSI) {
+#ifdef HAVE_PCI_MSI_MASK_IRQ
+		if (irq_state == 1)
+			pci_msi_unmask_irq(irq);
+		else
+			pci_msi_mask_irq(irq);
+#else
+		igbuio_mask_irq(pdev, udev->mode, irq_state);
+#endif
+	}
+
 	if (udev->mode == RTE_INTR_MODE_LEGACY)
 		pci_intx(pdev, !!irq_state);
 
-	else if (udev->mode == RTE_INTR_MODE_MSIX) {
-		struct msi_desc *desc;
-
-		list_for_each_entry(desc, &pdev->msi_list, list)
-			igbuio_msix_mask_irq(desc, irq_state);
-	}
 	pci_cfg_access_unlock(pdev);
 
 	return 0;
@@ -266,62 +207,163 @@ igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state)
  * If yes, disable it here and will be enable later.
  */
 static irqreturn_t
-igbuio_pci_irqhandler(int irq, struct uio_info *info)
+igbuio_pci_irqhandler(int irq, void *dev_id)
 {
-	struct rte_uio_pci_dev *udev = igbuio_get_uio_pci_dev(info);
+	struct rte_uio_pci_dev *udev = (struct rte_uio_pci_dev *)dev_id;
+	struct uio_info *info = &udev->info;
 
 	/* Legacy mode need to mask in hardware */
 	if (udev->mode == RTE_INTR_MODE_LEGACY &&
 	    !pci_check_and_mask_intx(udev->pdev))
 		return IRQ_NONE;
 
+	uio_event_notify(info);
+
 	/* Message signal mode, no share IRQ and automasked */
 	return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_XEN_DOM0
 static int
-igbuio_dom0_mmap_phys(struct uio_info *info, struct vm_area_struct *vma)
+igbuio_pci_enable_interrupts(struct rte_uio_pci_dev *udev)
 {
-	int idx;
+	int err = 0;
+#ifndef HAVE_ALLOC_IRQ_VECTORS
+	struct msix_entry msix_entry;
+#endif
+
+	switch (igbuio_intr_mode_preferred) {
+	case RTE_INTR_MODE_MSIX:
+		/* Only 1 msi-x vector needed */
+#ifndef HAVE_ALLOC_IRQ_VECTORS
+		msix_entry.entry = 0;
+		if (pci_enable_msix(udev->pdev, &msix_entry, 1) == 0) {
+			dev_dbg(&udev->pdev->dev, "using MSI-X");
+			udev->info.irq_flags = IRQF_NO_THREAD;
+			udev->info.irq = msix_entry.vector;
+			udev->mode = RTE_INTR_MODE_MSIX;
+			break;
+		}
+#else
+		if (pci_alloc_irq_vectors(udev->pdev, 1, 1, PCI_IRQ_MSIX) == 1) {
+			dev_dbg(&udev->pdev->dev, "using MSI-X");
+			udev->info.irq_flags = IRQF_NO_THREAD;
+			udev->info.irq = pci_irq_vector(udev->pdev, 0);
+			udev->mode = RTE_INTR_MODE_MSIX;
+			break;
+		}
+#endif
 
-	idx = (int)vma->vm_pgoff;
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-	vma->vm_page_prot.pgprot |= _PAGE_IOMAP;
+	/* fall back to MSI */
+	case RTE_INTR_MODE_MSI:
+#ifndef HAVE_ALLOC_IRQ_VECTORS
+		if (pci_enable_msi(udev->pdev) == 0) {
+			dev_dbg(&udev->pdev->dev, "using MSI");
+			udev->info.irq_flags = IRQF_NO_THREAD;
+			udev->info.irq = udev->pdev->irq;
+			udev->mode = RTE_INTR_MODE_MSI;
+			break;
+		}
+#else
+		if (pci_alloc_irq_vectors(udev->pdev, 1, 1, PCI_IRQ_MSI) == 1) {
+			dev_dbg(&udev->pdev->dev, "using MSI");
+			udev->info.irq_flags = IRQF_NO_THREAD;
+			udev->info.irq = pci_irq_vector(udev->pdev, 0);
+			udev->mode = RTE_INTR_MODE_MSI;
+			break;
+		}
+#endif
+	/* fall back to INTX */
+	case RTE_INTR_MODE_LEGACY:
+		if (pci_intx_mask_supported(udev->pdev)) {
+			dev_dbg(&udev->pdev->dev, "using INTX");
+			udev->info.irq_flags = IRQF_SHARED | IRQF_NO_THREAD;
+			udev->info.irq = udev->pdev->irq;
+			udev->mode = RTE_INTR_MODE_LEGACY;
+			break;
+		}
+		dev_notice(&udev->pdev->dev, "PCI INTX mask not supported\n");
+	/* fall back to no IRQ */
+	case RTE_INTR_MODE_NONE:
+		udev->mode = RTE_INTR_MODE_NONE;
+		udev->info.irq = UIO_IRQ_NONE;
+		break;
+
+	default:
+		dev_err(&udev->pdev->dev, "invalid IRQ mode %u",
+			igbuio_intr_mode_preferred);
+		udev->info.irq = UIO_IRQ_NONE;
+		err = -EINVAL;
+	}
 
-	return remap_pfn_range(vma,
-			vma->vm_start,
-			info->mem[idx].addr >> PAGE_SHIFT,
-			vma->vm_end - vma->vm_start,
-			vma->vm_page_prot);
+	if (udev->info.irq != UIO_IRQ_NONE)
+		err = request_irq(udev->info.irq, igbuio_pci_irqhandler,
+				  udev->info.irq_flags, udev->info.name,
+				  udev);
+	dev_info(&udev->pdev->dev, "uio device registered with irq %lx\n",
+		 udev->info.irq);
+
+	return err;
 }
 
+static void
+igbuio_pci_disable_interrupts(struct rte_uio_pci_dev *udev)
+{
+	if (udev->info.irq) {
+		free_irq(udev->info.irq, udev);
+		udev->info.irq = 0;
+	}
+
+#ifndef HAVE_ALLOC_IRQ_VECTORS
+	if (udev->mode == RTE_INTR_MODE_MSIX)
+		pci_disable_msix(udev->pdev);
+	if (udev->mode == RTE_INTR_MODE_MSI)
+		pci_disable_msi(udev->pdev);
+#else
+	if (udev->mode == RTE_INTR_MODE_MSIX ||
+	    udev->mode == RTE_INTR_MODE_MSI)
+		pci_free_irq_vectors(udev->pdev);
+#endif
+}
+
+
 /**
- * This is uio device mmap method which will use igbuio mmap for Xen
- * Dom0 environment.
+ * This gets called while opening uio device file.
  */
 static int
-igbuio_dom0_pci_mmap(struct uio_info *info, struct vm_area_struct *vma)
+igbuio_pci_open(struct uio_info *info, struct inode *inode)
 {
-	int idx;
-
-	if (vma->vm_pgoff >= MAX_UIO_MAPS)
-		return -EINVAL;
+	struct rte_uio_pci_dev *udev = info->priv;
+	struct pci_dev *dev = udev->pdev;
+	int err;
 
-	if (info->mem[vma->vm_pgoff].size == 0)
-		return -EINVAL;
+	/* set bus master, which was cleared by the reset function */
+	pci_set_master(dev);
 
-	idx = (int)vma->vm_pgoff;
-	switch (info->mem[idx].memtype) {
-	case UIO_MEM_PHYS:
-		return igbuio_dom0_mmap_phys(info, vma);
-	case UIO_MEM_LOGICAL:
-	case UIO_MEM_VIRTUAL:
-	default:
-		return -EINVAL;
+	/* enable interrupts */
+	err = igbuio_pci_enable_interrupts(udev);
+	if (err) {
+		dev_err(&dev->dev, "Enable interrupt fails\n");
+		return err;
 	}
+	return 0;
+}
+
+static int
+igbuio_pci_release(struct uio_info *info, struct inode *inode)
+{
+	struct rte_uio_pci_dev *udev = info->priv;
+	struct pci_dev *dev = udev->pdev;
+
+	/* disable interrupts */
+	igbuio_pci_disable_interrupts(udev);
+
+	/* stop the device from further DMA */
+	pci_clear_master(dev);
+
+	pci_reset_function(dev);
+
+	return 0;
 }
-#endif
 
 /* Remap pci resources described by bar #pci_bar in uio resource n. */
 static int
@@ -331,7 +373,7 @@ igbuio_pci_setup_iomem(struct pci_dev *dev, struct uio_info *info,
 	unsigned long addr, len;
 	void *internal_addr;
 
-	if (sizeof(info->mem) / sizeof(info->mem[0]) <= n)
+	if (n >= ARRAY_SIZE(info->mem))
 		return -EINVAL;
 
 	addr = pci_resource_start(dev, pci_bar);
@@ -356,7 +398,7 @@ igbuio_pci_setup_ioport(struct pci_dev *dev, struct uio_info *info,
 {
 	unsigned long addr, len;
 
-	if (sizeof(info->port) / sizeof(info->port[0]) <= n)
+	if (n >= ARRAY_SIZE(info->port))
 		return -EINVAL;
 
 	addr = pci_resource_start(dev, pci_bar);
@@ -401,7 +443,7 @@ igbuio_setup_bars(struct pci_dev *dev, struct uio_info *info)
 	iom = 0;
 	iop = 0;
 
-	for (i = 0; i != sizeof(bar_names) / sizeof(bar_names[0]); i++) {
+	for (i = 0; i < ARRAY_SIZE(bar_names); i++) {
 		if (pci_resource_len(dev, i) != 0 &&
 				pci_resource_start(dev, i) != 0) {
 			flags = pci_resource_flags(dev, i);
@@ -421,7 +463,7 @@ igbuio_setup_bars(struct pci_dev *dev, struct uio_info *info)
 		}
 	}
 
-	return (iom != 0) ? ret : -ENOENT;
+	return (iom != 0 || iop != 0) ? ret : -ENOENT;
 }
 
 #if LINUX_VERSION_CODE < KERNEL_VERSION(3, 8, 0)
@@ -432,7 +474,8 @@ static int
 igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct rte_uio_pci_dev *udev;
-	struct msix_entry msix_entry;
+	dma_addr_t map_dma_addr;
+	void *map_addr;
 	int err;
 
 	udev = kzalloc(sizeof(struct rte_uio_pci_dev), GFP_KERNEL);
@@ -449,16 +492,6 @@ igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto fail_free;
 	}
 
-	/*
-	 * reserve device's PCI memory regions for use by this
-	 * module
-	 */
-	err = pci_request_regions(dev, "igb_uio");
-	if (err != 0) {
-		dev_err(&dev->dev, "Cannot request regions\n");
-		goto fail_disable;
-	}
-
 	/* enable bus mastering on the device */
 	pci_set_master(dev);
 
@@ -483,49 +516,12 @@ igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	/* fill uio infos */
 	udev->info.name = "igb_uio";
 	udev->info.version = "0.1";
-	udev->info.handler = igbuio_pci_irqhandler;
 	udev->info.irqcontrol = igbuio_pci_irqcontrol;
-#ifdef CONFIG_XEN_DOM0
-	/* check if the driver run on Xen Dom0 */
-	if (xen_initial_domain())
-		udev->info.mmap = igbuio_dom0_pci_mmap;
-#endif
+	udev->info.open = igbuio_pci_open;
+	udev->info.release = igbuio_pci_release;
 	udev->info.priv = udev;
 	udev->pdev = dev;
 
-	switch (igbuio_intr_mode_preferred) {
-	case RTE_INTR_MODE_MSIX:
-		/* Only 1 msi-x vector needed */
-		msix_entry.entry = 0;
-		if (pci_enable_msix(dev, &msix_entry, 1) == 0) {
-			dev_dbg(&dev->dev, "using MSI-X");
-			udev->info.irq = msix_entry.vector;
-			udev->mode = RTE_INTR_MODE_MSIX;
-			break;
-		}
-		/* fall back to INTX */
-	case RTE_INTR_MODE_LEGACY:
-		if (pci_intx_mask_supported(dev)) {
-			dev_dbg(&dev->dev, "using INTX");
-			udev->info.irq_flags = IRQF_SHARED;
-			udev->info.irq = dev->irq;
-			udev->mode = RTE_INTR_MODE_LEGACY;
-			break;
-		}
-		dev_notice(&dev->dev, "PCI INTX mask not supported\n");
-		/* fall back to no IRQ */
-	case RTE_INTR_MODE_NONE:
-		udev->mode = RTE_INTR_MODE_NONE;
-		udev->info.irq = 0;
-		break;
-
-	default:
-		dev_err(&dev->dev, "invalid IRQ mode %u",
-			igbuio_intr_mode_preferred);
-		err = -EINVAL;
-		goto fail_release_iomem;
-	}
-
 	err = sysfs_create_group(&dev->dev.kobj, &dev_attr_grp);
 	if (err != 0)
 		goto fail_release_iomem;
@@ -537,8 +533,26 @@ igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	pci_set_drvdata(dev, udev);
 
-	dev_info(&dev->dev, "uio device registered with irq %lx\n",
-		 udev->info.irq);
+	/*
+	 * Doing a harmless dma mapping for attaching the device to
+	 * the iommu identity mapping if kernel boots with iommu=pt.
+	 * Note this is not a problem if no IOMMU at all.
+	 */
+	map_addr = dma_alloc_coherent(&dev->dev, 1024, &map_dma_addr,
+			GFP_KERNEL);
+	if (map_addr)
+		memset(map_addr, 0, 1024);
+
+	if (!map_addr)
+		dev_info(&dev->dev, "dma mapping failed\n");
+	else {
+		dev_info(&dev->dev, "mapping 1K dma=%#llx host=%p\n",
+			 (unsigned long long)map_dma_addr, map_addr);
+
+		dma_free_coherent(&dev->dev, 1024, map_addr, map_dma_addr);
+		dev_info(&dev->dev, "unmapping 1K dma=%#llx host=%p\n",
+			 (unsigned long long)map_dma_addr, map_addr);
+	}
 
 	return 0;
 
@@ -546,10 +560,6 @@ fail_remove_group:
 	sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
 fail_release_iomem:
 	igbuio_pci_release_iomem(&udev->info);
-	if (udev->mode == RTE_INTR_MODE_MSIX)
-		pci_disable_msix(udev->pdev);
-	pci_release_regions(dev);
-fail_disable:
 	pci_disable_device(dev);
 fail_free:
 	kfree(udev);
@@ -560,23 +570,14 @@ fail_free:
 static void
 igbuio_pci_remove(struct pci_dev *dev)
 {
-	struct uio_info *info = pci_get_drvdata(dev);
-	struct rte_uio_pci_dev *udev = igbuio_get_uio_pci_dev(info);
-
-	if (info->priv == NULL) {
-		pr_notice("Not igbuio device\n");
-		return;
-	}
+	struct rte_uio_pci_dev *udev = pci_get_drvdata(dev);
 
 	sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
-	uio_unregister_device(info);
-	igbuio_pci_release_iomem(info);
-	if (udev->mode == RTE_INTR_MODE_MSIX)
-		pci_disable_msix(dev);
-	pci_release_regions(dev);
+	uio_unregister_device(&udev->info);
+	igbuio_pci_release_iomem(&udev->info);
 	pci_disable_device(dev);
 	pci_set_drvdata(dev, NULL);
-	kfree(info);
+	kfree(udev);
 }
 
 static int
@@ -590,6 +591,9 @@ igbuio_config_intr_mode(char *intr_str)
 	if (!strcmp(intr_str, RTE_INTR_MODE_MSIX_NAME)) {
 		igbuio_intr_mode_preferred = RTE_INTR_MODE_MSIX;
 		pr_info("Use MSIX interrupt\n");
+	} else if (!strcmp(intr_str, RTE_INTR_MODE_MSI_NAME)) {
+		igbuio_intr_mode_preferred = RTE_INTR_MODE_MSI;
+		pr_info("Use MSI interrupt\n");
 	} else if (!strcmp(intr_str, RTE_INTR_MODE_LEGACY_NAME)) {
 		igbuio_intr_mode_preferred = RTE_INTR_MODE_LEGACY;
 		pr_info("Use legacy interrupt\n");
@@ -633,6 +637,7 @@ module_param(intr_mode, charp, S_IRUGO);
 MODULE_PARM_DESC(intr_mode,
 "igb_uio interrupt mode (default=msix):\n"
 "    " RTE_INTR_MODE_MSIX_NAME "       Use MSIX interrupt\n"
+"    " RTE_INTR_MODE_MSI_NAME "        Use MSI interrupt\n"
 "    " RTE_INTR_MODE_LEGACY_NAME "     Use Legacy interrupt\n"
 "\n");