X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_ether%2Frte_ethdev.h;h=0474451c8a624e85e02749c492efe11add67db39;hb=fee1fa0285a8ef821285456f66914cfa685c2d3f;hp=213fe27e19ce585807e945fa80a660d6bc8255b2;hpb=11c5d3411f94c3284564ea4e56a7c9fa6858aa1c;p=dpdk.git diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index 213fe27e19..0474451c8a 100644 --- a/lib/librte_ether/rte_ethdev.h +++ b/lib/librte_ether/rte_ethdev.h @@ -980,6 +980,23 @@ struct rte_eth_conf { * the same mempool and has refcnt = 1. */ #define DEV_TX_OFFLOAD_SECURITY 0x00020000 +/** + * Device supports generic UDP tunneled packet TSO. + * Application must set PKT_TX_TUNNEL_UDP and other mbuf fields required + * for tunnel TSO. + */ +#define DEV_TX_OFFLOAD_UDP_TNL_TSO 0x00040000 +/** + * Device supports generic IP tunneled packet TSO. + * Application must set PKT_TX_TUNNEL_IP and other mbuf fields required + * for tunnel TSO. + */ +#define DEV_TX_OFFLOAD_IP_TNL_TSO 0x00080000 + +#define RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP 0x00000001 +/**< Device supports Rx queue setup after device started*/ +#define RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP 0x00000002 +/**< Device supports Tx queue setup after device started*/ /* * If new Tx offload capabilities are defined, they also must be @@ -988,11 +1005,32 @@ struct rte_eth_conf { struct rte_pci_device; +/* + * Fallback default preferred Rx/Tx port parameters. + * These are used if an application requests default parameters + * but the PMD does not provide preferred values. + */ +#define RTE_ETH_DEV_FALLBACK_RX_RINGSIZE 512 +#define RTE_ETH_DEV_FALLBACK_TX_RINGSIZE 512 +#define RTE_ETH_DEV_FALLBACK_RX_NBQUEUES 1 +#define RTE_ETH_DEV_FALLBACK_TX_NBQUEUES 1 + +/** + * Preferred Rx/Tx port parameters. + * There are separate instances of this structure for transmission + * and reception respectively. + */ +struct rte_eth_dev_portconf { + uint16_t burst_size; /**< Device-preferred burst size */ + uint16_t ring_size; /**< Device-preferred size of queue rings */ + uint16_t nb_queues; /**< Device-preferred number of queues */ +}; + /** * Ethernet device information */ struct rte_eth_dev_info { - struct rte_pci_device *pci_dev; /**< Device PCI information. */ + struct rte_device *device; /** Generic device information */ const char *driver_name; /**< Device Driver name. */ unsigned int if_index; /**< Index to bound host interface, or 0 if none. Use if_indextoname() to translate into an interface name. */ @@ -1029,6 +1067,12 @@ struct rte_eth_dev_info { /** Configured number of rx/tx queues */ uint16_t nb_rx_queues; /**< Number of RX queues. */ uint16_t nb_tx_queues; /**< Number of TX queues. */ + /** Rx parameter recommendations */ + struct rte_eth_dev_portconf default_rxportconf; + /** Tx parameter recommendations */ + struct rte_eth_dev_portconf default_txportconf; + /** Generic device capabilities (RTE_ETH_DEV_CAPA_). */ + uint64_t dev_capa; }; /** @@ -1117,8 +1161,6 @@ struct rte_eth_dcb_info { #define RTE_ETH_QUEUE_STATE_STOPPED 0 #define RTE_ETH_QUEUE_STATE_STARTED 1 -struct rte_eth_dev; - #define RTE_ETH_ALL RTE_MAX_ETHPORTS /* Macros to check for valid port */ @@ -1235,9 +1277,6 @@ struct rte_eth_dev_owner { #define RTE_ETH_DEV_INTR_RMV 0x0008 /** - * @warning - * @b EXPERIMENTAL: this API may change without prior notice. - * * Iterates over valid ethdev ports owned by a specific owner. * * @param port_id @@ -1248,7 +1287,7 @@ struct rte_eth_dev_owner { * @return * Next valid port id owned by owner_id, RTE_MAX_ETHPORTS if there is none. */ -uint64_t __rte_experimental rte_eth_find_next_owned_by(uint16_t port_id, +uint64_t rte_eth_find_next_owned_by(uint16_t port_id, const uint64_t owner_id); /** @@ -1362,8 +1401,31 @@ int __rte_experimental rte_eth_dev_owner_get(const uint16_t port_id, * @return * - The total number of usable Ethernet devices. */ +__rte_deprecated uint16_t rte_eth_dev_count(void); +/** + * Get the number of ports which are usable for the application. + * + * These devices must be iterated by using the macro + * ``RTE_ETH_FOREACH_DEV`` or ``RTE_ETH_FOREACH_DEV_OWNED_BY`` + * to deal with non-contiguous ranges of devices. + * + * @return + * The count of available Ethernet devices. + */ +uint16_t rte_eth_dev_count_avail(void); + +/** + * Get the total number of ports which are allocated. + * + * Some devices may not be available for the application. + * + * @return + * The total count of Ethernet devices. + */ +uint16_t __rte_experimental rte_eth_dev_count_total(void); + /** * Attach a new Ethernet device specified by arguments. * @@ -2437,6 +2499,46 @@ rte_eth_tx_buffer_count_callback(struct rte_mbuf **pkts, uint16_t unsent, int rte_eth_tx_done_cleanup(uint16_t port_id, uint16_t queue_id, uint32_t free_cnt); +/** + * Subtypes for IPsec offload event(@ref RTE_ETH_EVENT_IPSEC) raised by + * eth device. + */ +enum rte_eth_event_ipsec_subtype { + RTE_ETH_EVENT_IPSEC_UNKNOWN = 0, + /**< Unknown event type */ + RTE_ETH_EVENT_IPSEC_ESN_OVERFLOW, + /**< Sequence number overflow */ + RTE_ETH_EVENT_IPSEC_SA_TIME_EXPIRY, + /**< Soft time expiry of SA */ + RTE_ETH_EVENT_IPSEC_SA_BYTE_EXPIRY, + /**< Soft byte expiry of SA */ + RTE_ETH_EVENT_IPSEC_MAX + /**< Max value of this enum */ +}; + +/** + * Descriptor for @ref RTE_ETH_EVENT_IPSEC event. Used by eth dev to send extra + * information of the IPsec offload event. + */ +struct rte_eth_event_ipsec_desc { + enum rte_eth_event_ipsec_subtype subtype; + /**< Type of RTE_ETH_EVENT_IPSEC_* event */ + uint64_t metadata; + /**< Event specific metadata + * + * For the following events, *userdata* registered + * with the *rte_security_session* would be returned + * as metadata, + * + * - @ref RTE_ETH_EVENT_IPSEC_ESN_OVERFLOW + * - @ref RTE_ETH_EVENT_IPSEC_SA_TIME_EXPIRY + * - @ref RTE_ETH_EVENT_IPSEC_SA_BYTE_EXPIRY + * + * @see struct rte_security_session_conf + * + */ +}; + /** * The eth device event type for interrupt, and maybe others in the future. */ @@ -2452,6 +2554,7 @@ enum rte_eth_event_type { RTE_ETH_EVENT_INTR_RMV, /**< device removal event */ RTE_ETH_EVENT_NEW, /**< port is probed */ RTE_ETH_EVENT_DESTROY, /**< port is released */ + RTE_ETH_EVENT_IPSEC, /**< IPsec offload related event */ RTE_ETH_EVENT_MAX /**< max value of this enum */ }; @@ -3004,6 +3107,8 @@ int rte_eth_dev_filter_ctrl(uint16_t port_id, enum rte_filter_type filter_type, int rte_eth_dev_get_dcb_info(uint16_t port_id, struct rte_eth_dcb_info *dcb_info); +struct rte_eth_rxtx_callback; + /** * Add a callback to be called on packet RX on a given port and queue. * @@ -3028,7 +3133,8 @@ int rte_eth_dev_get_dcb_info(uint16_t port_id, * NULL on error. * On success, a pointer value which can later be used to remove the callback. */ -void *rte_eth_add_rx_callback(uint16_t port_id, uint16_t queue_id, +const struct rte_eth_rxtx_callback * +rte_eth_add_rx_callback(uint16_t port_id, uint16_t queue_id, rte_rx_callback_fn fn, void *user_param); /** @@ -3056,7 +3162,8 @@ void *rte_eth_add_rx_callback(uint16_t port_id, uint16_t queue_id, * NULL on error. * On success, a pointer value which can later be used to remove the callback. */ -void *rte_eth_add_first_rx_callback(uint16_t port_id, uint16_t queue_id, +const struct rte_eth_rxtx_callback * +rte_eth_add_first_rx_callback(uint16_t port_id, uint16_t queue_id, rte_rx_callback_fn fn, void *user_param); /** @@ -3083,11 +3190,10 @@ void *rte_eth_add_first_rx_callback(uint16_t port_id, uint16_t queue_id, * NULL on error. * On success, a pointer value which can later be used to remove the callback. */ -void *rte_eth_add_tx_callback(uint16_t port_id, uint16_t queue_id, +const struct rte_eth_rxtx_callback * +rte_eth_add_tx_callback(uint16_t port_id, uint16_t queue_id, rte_tx_callback_fn fn, void *user_param); -struct rte_eth_rxtx_callback; - /** * Remove an RX packet callback from a given port and queue. * @@ -3119,7 +3225,7 @@ struct rte_eth_rxtx_callback; * is NULL or not found for the port/queue. */ int rte_eth_remove_rx_callback(uint16_t port_id, uint16_t queue_id, - struct rte_eth_rxtx_callback *user_cb); + const struct rte_eth_rxtx_callback *user_cb); /** * Remove a TX packet callback from a given port and queue. @@ -3152,7 +3258,7 @@ int rte_eth_remove_rx_callback(uint16_t port_id, uint16_t queue_id, * is NULL or not found for the port/queue. */ int rte_eth_remove_tx_callback(uint16_t port_id, uint16_t queue_id, - struct rte_eth_rxtx_callback *user_cb); + const struct rte_eth_rxtx_callback *user_cb); /** * Retrieve information about given port's RX queue. @@ -3261,6 +3367,49 @@ int rte_eth_dev_get_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info); */ int rte_eth_dev_set_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info); +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Retrieve the type and size of plugin module EEPROM + * + * @param port_id + * The port identifier of the Ethernet device. + * @param modinfo + * The type and size of plugin module EEPROM. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. + * - others depends on the specific operations implementation. + */ +int __rte_experimental +rte_eth_dev_get_module_info(uint16_t port_id, + struct rte_eth_dev_module_info *modinfo); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Retrieve the data of plugin module EEPROM + * + * @param port_id + * The port identifier of the Ethernet device. + * @param info + * The template includes the plugin module EEPROM attributes, and the + * buffer for return plugin module EEPROM data. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. + * - others depends on the specific operations implementation. + */ +int __rte_experimental +rte_eth_dev_get_module_eeprom(uint16_t port_id, + struct rte_dev_eeprom_info *info); + /** * Set the list of multicast addresses to filter on an Ethernet device. * @@ -3862,6 +4011,9 @@ static inline int rte_eth_tx_descriptor_status(uint16_t port_id, * invoke this function concurrently on the same tx queue without SW lock. * @see rte_eth_dev_info_get, struct rte_eth_txconf::txq_flags * + * @see rte_eth_tx_prepare to perform some prior checks or adjustments + * for offloads. + * * @param port_id * The port identifier of the Ethernet device. * @param queue_id