X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_ether%2Frte_ethdev.h;h=0474451c8a624e85e02749c492efe11add67db39;hb=fee1fa0285a8ef821285456f66914cfa685c2d3f;hp=cce1a53768c71028e62a5c2073339a43f3c36e77;hpb=4dc294158cac46b6b69b60ff4216503777c5eb57;p=dpdk.git diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index cce1a53768..0474451c8a 100644 --- a/lib/librte_ether/rte_ethdev.h +++ b/lib/librte_ether/rte_ethdev.h @@ -1,34 +1,5 @@ -/*- - * BSD LICENSE - * - * Copyright(c) 2010-2014 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2010-2017 Intel Corporation */ #ifndef _RTE_ETHDEV_H_ @@ -46,10 +17,10 @@ * to get its MAC address, the speed and the status of its physical link, * to receive and to transmit packets, and so on. * - * - The driver-oriented Ethernet API that exports a function allowing - * an Ethernet Poll Mode Driver (PMD) to simultaneously register itself as - * an Ethernet device driver and as a PCI driver for a set of matching PCI - * [Ethernet] devices classes. + * - The driver-oriented Ethernet API that exports functions allowing + * an Ethernet Poll Mode Driver (PMD) to allocate an Ethernet device instance, + * create memzone for HW rings and process registered callbacks, and so on. + * PMDs should include rte_ethdev_driver.h instead of this header. * * By default, all the functions of the Ethernet Device API exported by a PMD * are lock-free functions which assume to not be invoked in parallel on @@ -102,7 +73,7 @@ * rte_eth_dev_configure(), rte_eth_tx_queue_setup(), or * rte_eth_rx_queue_setup()), it must call rte_eth_dev_stop() first to stop the * device and then do the reconfiguration before calling rte_eth_dev_start() - * again. The tramsit and receive functions should not be invoked when the + * again. The transmit and receive functions should not be invoked when the * device is stopped. * * Please note that some configuration is not stored between calls to @@ -118,7 +89,7 @@ * - NIC queue statistics mappings * * Any other configuration will not be stored and will need to be re-entered - * after a call to rte_eth_dev_start(). + * before a call to rte_eth_dev_start(). * * Finally, a network application can close an Ethernet device by invoking the * rte_eth_dev_close() function. @@ -172,34 +143,42 @@ extern "C" { #include +/* Use this macro to check if LRO API is supported */ +#define RTE_ETHDEV_HAS_LRO_SUPPORT + +#include #include #include -#include -#include +#include +#include +#include +#include +#include + #include "rte_ether.h" #include "rte_eth_ctrl.h" +#include "rte_dev_info.h" + +struct rte_mbuf; /** * A structure used to retrieve statistics for an Ethernet port. + * Not all statistics fields in struct rte_eth_stats are supported + * by any type of network interface card (NIC). If any statistics + * field is not supported, its value is 0. */ struct rte_eth_stats { uint64_t ipackets; /**< Total number of successfully received packets. */ uint64_t opackets; /**< Total number of successfully transmitted packets.*/ uint64_t ibytes; /**< Total number of successfully received bytes. */ uint64_t obytes; /**< Total number of successfully transmitted bytes. */ - uint64_t imissed; /**< Total of RX missed packets (e.g full FIFO). */ - uint64_t ibadcrc; /**< Total of RX packets with CRC error. */ - uint64_t ibadlen; /**< Total of RX packets with bad length. */ + uint64_t imissed; + /**< Total of RX packets dropped by the HW, + * because there are no available buffer (i.e. RX queues are full). + */ uint64_t ierrors; /**< Total number of erroneous received packets. */ uint64_t oerrors; /**< Total number of failed transmitted packets. */ - uint64_t imcasts; /**< Total number of multicast received packets. */ uint64_t rx_nombuf; /**< Total number of RX mbuf allocation failures. */ - uint64_t fdirmatch; /**< Total number of RX packets matching a filter. */ - uint64_t fdirmiss; /**< Total number of RX packets not matching any filter. */ - uint64_t tx_pause_xon; /**< Total nb. of XON pause frame sent. */ - uint64_t rx_pause_xon; /**< Total nb. of XON pause frame received. */ - uint64_t tx_pause_xoff; /**< Total nb. of XOFF pause frame sent. */ - uint64_t rx_pause_xoff; /**< Total nb. of XOFF pause frame received. */ uint64_t q_ipackets[RTE_ETHDEV_QUEUE_STAT_CNTRS]; /**< Total number of queue RX packets. */ uint64_t q_opackets[RTE_ETHDEV_QUEUE_STAT_CNTRS]; @@ -210,37 +189,63 @@ struct rte_eth_stats { /**< Total number of successfully transmitted queue bytes. */ uint64_t q_errors[RTE_ETHDEV_QUEUE_STAT_CNTRS]; /**< Total number of queue packets received that are dropped. */ - uint64_t ilbpackets; - /**< Total number of good packets received from loopback,VF Only */ - uint64_t olbpackets; - /**< Total number of good packets transmitted to loopback,VF Only */ - uint64_t ilbbytes; - /**< Total number of good bytes received from loopback,VF Only */ - uint64_t olbbytes; - /**< Total number of good bytes transmitted to loopback,VF Only */ }; +/** + * Device supported speeds bitmap flags + */ +#define ETH_LINK_SPEED_AUTONEG (0 << 0) /**< Autonegotiate (all speeds) */ +#define ETH_LINK_SPEED_FIXED (1 << 0) /**< Disable autoneg (fixed speed) */ +#define ETH_LINK_SPEED_10M_HD (1 << 1) /**< 10 Mbps half-duplex */ +#define ETH_LINK_SPEED_10M (1 << 2) /**< 10 Mbps full-duplex */ +#define ETH_LINK_SPEED_100M_HD (1 << 3) /**< 100 Mbps half-duplex */ +#define ETH_LINK_SPEED_100M (1 << 4) /**< 100 Mbps full-duplex */ +#define ETH_LINK_SPEED_1G (1 << 5) /**< 1 Gbps */ +#define ETH_LINK_SPEED_2_5G (1 << 6) /**< 2.5 Gbps */ +#define ETH_LINK_SPEED_5G (1 << 7) /**< 5 Gbps */ +#define ETH_LINK_SPEED_10G (1 << 8) /**< 10 Gbps */ +#define ETH_LINK_SPEED_20G (1 << 9) /**< 20 Gbps */ +#define ETH_LINK_SPEED_25G (1 << 10) /**< 25 Gbps */ +#define ETH_LINK_SPEED_40G (1 << 11) /**< 40 Gbps */ +#define ETH_LINK_SPEED_50G (1 << 12) /**< 50 Gbps */ +#define ETH_LINK_SPEED_56G (1 << 13) /**< 56 Gbps */ +#define ETH_LINK_SPEED_100G (1 << 14) /**< 100 Gbps */ + +/** + * Ethernet numeric link speeds in Mbps + */ +#define ETH_SPEED_NUM_NONE 0 /**< Not defined */ +#define ETH_SPEED_NUM_10M 10 /**< 10 Mbps */ +#define ETH_SPEED_NUM_100M 100 /**< 100 Mbps */ +#define ETH_SPEED_NUM_1G 1000 /**< 1 Gbps */ +#define ETH_SPEED_NUM_2_5G 2500 /**< 2.5 Gbps */ +#define ETH_SPEED_NUM_5G 5000 /**< 5 Gbps */ +#define ETH_SPEED_NUM_10G 10000 /**< 10 Gbps */ +#define ETH_SPEED_NUM_20G 20000 /**< 20 Gbps */ +#define ETH_SPEED_NUM_25G 25000 /**< 25 Gbps */ +#define ETH_SPEED_NUM_40G 40000 /**< 40 Gbps */ +#define ETH_SPEED_NUM_50G 50000 /**< 50 Gbps */ +#define ETH_SPEED_NUM_56G 56000 /**< 56 Gbps */ +#define ETH_SPEED_NUM_100G 100000 /**< 100 Gbps */ + /** * A structure used to retrieve link-level information of an Ethernet port. */ +__extension__ struct rte_eth_link { - uint16_t link_speed; /**< ETH_LINK_SPEED_[10, 100, 1000, 10000] */ - uint16_t link_duplex; /**< ETH_LINK_[HALF_DUPLEX, FULL_DUPLEX] */ - uint8_t link_status : 1; /**< 1 -> link up, 0 -> link down */ -}__attribute__((aligned(8))); /**< aligned for atomic64 read/write */ - -#define ETH_LINK_SPEED_AUTONEG 0 /**< Auto-negotiate link speed. */ -#define ETH_LINK_SPEED_10 10 /**< 10 megabits/second. */ -#define ETH_LINK_SPEED_100 100 /**< 100 megabits/second. */ -#define ETH_LINK_SPEED_1000 1000 /**< 1 gigabits/second. */ -#define ETH_LINK_SPEED_10000 10000 /**< 10 gigabits/second. */ -#define ETH_LINK_SPEED_10G 10000 /**< alias of 10 gigabits/second. */ -#define ETH_LINK_SPEED_20G 20000 /**< 20 gigabits/second. */ -#define ETH_LINK_SPEED_40G 40000 /**< 40 gigabits/second. */ - -#define ETH_LINK_AUTONEG_DUPLEX 0 /**< Auto-negotiate duplex. */ -#define ETH_LINK_HALF_DUPLEX 1 /**< Half-duplex connection. */ -#define ETH_LINK_FULL_DUPLEX 2 /**< Full-duplex connection. */ + uint32_t link_speed; /**< ETH_SPEED_NUM_ */ + uint16_t link_duplex : 1; /**< ETH_LINK_[HALF/FULL]_DUPLEX */ + uint16_t link_autoneg : 1; /**< ETH_LINK_[AUTONEG/FIXED] */ + uint16_t link_status : 1; /**< ETH_LINK_[DOWN/UP] */ +} __attribute__((aligned(8))); /**< aligned for atomic64 read/write */ + +/* Utility constants */ +#define ETH_LINK_HALF_DUPLEX 0 /**< Half-duplex connection (see link_duplex). */ +#define ETH_LINK_FULL_DUPLEX 1 /**< Full-duplex connection (see link_duplex). */ +#define ETH_LINK_DOWN 0 /**< Link is down (see link_status). */ +#define ETH_LINK_UP 1 /**< Link is up (see link_status). */ +#define ETH_LINK_FIXED 0 /**< No autonegotiation (see link_autoneg). */ +#define ETH_LINK_AUTONEG 1 /**< Autonegotiated (see link_autoneg). */ /** * A structure used to configure the ring threshold registers of an RX/TX @@ -318,14 +323,58 @@ struct rte_eth_rxmode { enum rte_eth_rx_mq_mode mq_mode; uint32_t max_rx_pkt_len; /**< Only used if jumbo_frame enabled. */ uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/ - uint8_t header_split : 1, /**< Header Split enable. */ + /** + * Per-port Rx offloads to be set using DEV_RX_OFFLOAD_* flags. + * Only offloads set on rx_offload_capa field on rte_eth_dev_info + * structure are allowed to be set. + */ + uint64_t offloads; + __extension__ + /** + * Below bitfield API is obsolete. Application should + * enable per-port offloads using the offload field + * above. + */ + uint16_t header_split : 1, /**< Header Split enable. */ hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable. */ hw_vlan_filter : 1, /**< VLAN filter enable. */ hw_vlan_strip : 1, /**< VLAN strip enable. */ hw_vlan_extend : 1, /**< Extended VLAN enable. */ jumbo_frame : 1, /**< Jumbo Frame Receipt enable. */ hw_strip_crc : 1, /**< Enable CRC stripping by hardware. */ - enable_scatter : 1; /**< Enable scatter packets rx handler */ + enable_scatter : 1, /**< Enable scatter packets rx handler */ + enable_lro : 1, /**< Enable LRO */ + hw_timestamp : 1, /**< Enable HW timestamp */ + security : 1, /**< Enable rte_security offloads */ + /** + * When set the offload bitfield should be ignored. + * Instead per-port Rx offloads should be set on offloads + * field above. + * Per-queue offloads shuold be set on rte_eth_rxq_conf + * structure. + * This bit is temporary till rxmode bitfield offloads API will + * be deprecated. + */ + ignore_offload_bitfield : 1; +}; + +/** + * VLAN types to indicate if it is for single VLAN, inner VLAN or outer VLAN. + * Note that single VLAN is treated the same as inner VLAN. + */ +enum rte_vlan_type { + ETH_VLAN_TYPE_UNKNOWN = 0, + ETH_VLAN_TYPE_INNER, /**< Inner VLAN. */ + ETH_VLAN_TYPE_OUTER, /**< Single VLAN, or outer VLAN. */ + ETH_VLAN_TYPE_MAX, +}; + +/** + * A structure used to describe a vlan filter. + * If the bit corresponding to a VID is set, such VID is on. + */ +struct rte_vlan_filter_conf { + uint64_t ids[64]; }; /** @@ -373,6 +422,10 @@ struct rte_eth_rss_conf { #define ETH_RSS_IPV6_EX (1ULL << RTE_ETH_FLOW_IPV6_EX) #define ETH_RSS_IPV6_TCP_EX (1ULL << RTE_ETH_FLOW_IPV6_TCP_EX) #define ETH_RSS_IPV6_UDP_EX (1ULL << RTE_ETH_FLOW_IPV6_UDP_EX) +#define ETH_RSS_PORT (1ULL << RTE_ETH_FLOW_PORT) +#define ETH_RSS_VXLAN (1ULL << RTE_ETH_FLOW_VXLAN) +#define ETH_RSS_GENEVE (1ULL << RTE_ETH_FLOW_GENEVE) +#define ETH_RSS_NVGRE (1ULL << RTE_ETH_FLOW_NVGRE) #define ETH_RSS_IP ( \ ETH_RSS_IPV4 | \ @@ -397,6 +450,11 @@ struct rte_eth_rss_conf { ETH_RSS_NONFRAG_IPV4_SCTP | \ ETH_RSS_NONFRAG_IPV6_SCTP) +#define ETH_RSS_TUNNEL ( \ + ETH_RSS_VXLAN | \ + ETH_RSS_GENEVE | \ + ETH_RSS_NVGRE) + /**< Mask of valid RSS hash protocols */ #define ETH_RSS_PROTO_MASK ( \ ETH_RSS_IPV4 | \ @@ -414,7 +472,11 @@ struct rte_eth_rss_conf { ETH_RSS_L2_PAYLOAD | \ ETH_RSS_IPV6_EX | \ ETH_RSS_IPV6_TCP_EX | \ - ETH_RSS_IPV6_UDP_EX) + ETH_RSS_IPV6_UDP_EX | \ + ETH_RSS_PORT | \ + ETH_RSS_VXLAN | \ + ETH_RSS_GENEVE | \ + ETH_RSS_NVGRE) /* * Definitions used for redirection table entry size. @@ -423,6 +485,7 @@ struct rte_eth_rss_conf { */ #define ETH_RSS_RETA_SIZE_64 64 #define ETH_RSS_RETA_SIZE_128 128 +#define ETH_RSS_RETA_SIZE_256 256 #define ETH_RSS_RETA_SIZE_512 512 #define RTE_RETA_GROUP_SIZE 64 @@ -460,31 +523,33 @@ struct rte_eth_rss_conf { #define ETH_VMDQ_ACCEPT_BROADCAST 0x0008 /**< accept broadcast packets. */ #define ETH_VMDQ_ACCEPT_MULTICAST 0x0010 /**< multicast promiscuous. */ -/* Definitions used for VMDQ mirror rules setting */ -#define ETH_VMDQ_NUM_MIRROR_RULE 4 /**< Maximum nb. of mirror rules. . */ +/** Maximum nb. of vlan per mirror rule */ +#define ETH_MIRROR_MAX_VLANS 64 -#define ETH_VMDQ_POOL_MIRROR 0x0001 /**< Virtual Pool Mirroring. */ -#define ETH_VMDQ_UPLINK_MIRROR 0x0002 /**< Uplink Port Mirroring. */ -#define ETH_VMDQ_DOWNLIN_MIRROR 0x0004 /**< Downlink Port Mirroring. */ -#define ETH_VMDQ_VLAN_MIRROR 0x0008 /**< VLAN Mirroring. */ +#define ETH_MIRROR_VIRTUAL_POOL_UP 0x01 /**< Virtual Pool uplink Mirroring. */ +#define ETH_MIRROR_UPLINK_PORT 0x02 /**< Uplink Port Mirroring. */ +#define ETH_MIRROR_DOWNLINK_PORT 0x04 /**< Downlink Port Mirroring. */ +#define ETH_MIRROR_VLAN 0x08 /**< VLAN Mirroring. */ +#define ETH_MIRROR_VIRTUAL_POOL_DOWN 0x10 /**< Virtual Pool downlink Mirroring. */ /** * A structure used to configure VLAN traffic mirror of an Ethernet port. */ struct rte_eth_vlan_mirror { uint64_t vlan_mask; /**< mask for valid VLAN ID. */ - uint16_t vlan_id[ETH_VMDQ_MAX_VLAN_FILTERS]; - /** VLAN ID list for vlan mirror. */ + /** VLAN ID list for vlan mirroring. */ + uint16_t vlan_id[ETH_MIRROR_MAX_VLANS]; }; /** * A structure used to configure traffic mirror of an Ethernet port. */ -struct rte_eth_vmdq_mirror_conf { - uint8_t rule_type_mask; /**< Mirroring rule type mask we want to set */ - uint8_t dst_pool; /**< Destination pool for this mirror rule. */ +struct rte_eth_mirror_conf { + uint8_t rule_type; /**< Mirroring rule type */ + uint8_t dst_pool; /**< Destination pool for this mirror rule. */ uint64_t pool_mask; /**< Bitmap of pool for pool mirroring */ - struct rte_eth_vlan_mirror vlan; /**< VLAN ID setting for VLAN mirroring */ + /** VLAN ID setting for VLAN mirroring. */ + struct rte_eth_vlan_mirror vlan; }; /** @@ -496,13 +561,13 @@ struct rte_eth_vmdq_mirror_conf { struct rte_eth_rss_reta_entry64 { uint64_t mask; /**< Mask bits indicate which entries need to be updated/queried. */ - uint8_t reta[RTE_RETA_GROUP_SIZE]; + uint16_t reta[RTE_RETA_GROUP_SIZE]; /**< Group of 64 redirection table entries. */ }; /** * This enum indicates the possible number of traffic classes - * in DCB configratioins + * in DCB configurations */ enum rte_eth_nb_tcs { ETH_4_TCS = 4, /**< 4 TCs with DCB. */ @@ -523,20 +588,20 @@ enum rte_eth_nb_pools { /* This structure may be extended in future. */ struct rte_eth_dcb_rx_conf { enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs */ - uint8_t dcb_queue[ETH_DCB_NUM_USER_PRIORITIES]; - /**< Possible DCB queue,4 or 8. */ + /** Traffic class each UP mapped to. */ + uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES]; }; struct rte_eth_vmdq_dcb_tx_conf { enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools. */ - uint8_t dcb_queue[ETH_DCB_NUM_USER_PRIORITIES]; - /**< Possible DCB queue,4 or 8. */ + /** Traffic class each UP mapped to. */ + uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES]; }; struct rte_eth_dcb_tx_conf { enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs. */ - uint8_t dcb_queue[ETH_DCB_NUM_USER_PRIORITIES]; - /**< Possible DCB queue,4 or 8. */ + /** Traffic class each UP mapped to. */ + uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES]; }; struct rte_eth_vmdq_tx_conf { @@ -563,10 +628,28 @@ struct rte_eth_vmdq_dcb_conf { uint16_t vlan_id; /**< The vlan id of the received frame */ uint64_t pools; /**< Bitmask of pools for packet rx */ } pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */ - uint8_t dcb_queue[ETH_DCB_NUM_USER_PRIORITIES]; + uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES]; /**< Selects a queue in a pool */ }; +/** + * A structure used to configure the VMDQ feature of an Ethernet port when + * not combined with the DCB feature. + * + * Using this feature, packets are routed to a pool of queues. By default, + * the pool selection is based on the MAC address, the vlan id in the + * vlan tag as specified in the pool_map array. + * Passing the ETH_VMDQ_ACCEPT_UNTAG in the rx_mode field allows pool + * selection using only the MAC address. MAC address to pool mapping is done + * using the rte_eth_dev_mac_addr_add function, with the pool parameter + * corresponding to the pool id. + * + * Queue selection within the selected pool will be done using RSS when + * it is enabled or revert to the first queue of the pool if not. + * + * A default pool may be used, if desired, to route all traffic which + * does not match the vlan filter rules or any pool MAC address. + */ struct rte_eth_vmdq_rx_conf { enum rte_eth_nb_pools nb_queue_pools; /**< VMDq only mode, 8 or 64 pools */ uint8_t enable_default_pool; /**< If non-zero, use a default pool */ @@ -585,9 +668,16 @@ struct rte_eth_vmdq_rx_conf { */ struct rte_eth_txmode { enum rte_eth_tx_mq_mode mq_mode; /**< TX multi-queues mode. */ + /** + * Per-port Tx offloads to be set using DEV_TX_OFFLOAD_* flags. + * Only offloads set on tx_offload_capa field on rte_eth_dev_info + * structure are allowed to be set. + */ + uint64_t offloads; /* For i40e specifically */ uint16_t pvid; + __extension__ uint8_t hw_vlan_reject_tagged : 1, /**< If set, reject sending out tagged pkts */ hw_vlan_reject_untagged : 1, @@ -604,6 +694,12 @@ struct rte_eth_rxconf { uint16_t rx_free_thresh; /**< Drives the freeing of RX descriptors. */ uint8_t rx_drop_en; /**< Drop packets if no descriptors are available. */ uint8_t rx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */ + /** + * Per-queue Rx offloads to be set using DEV_RX_OFFLOAD_* flags. + * Only offloads set on rx_queue_offload_capa or rx_offload_capa + * fields on rte_eth_dev_info structure are allowed to be set. + */ + uint64_t offloads; }; #define ETH_TXQ_FLAGS_NOMULTSEGS 0x0001 /**< nb_segs=1 for all mbufs */ @@ -619,15 +715,64 @@ struct rte_eth_rxconf { #define ETH_TXQ_FLAGS_NOXSUMS \ (ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \ ETH_TXQ_FLAGS_NOXSUMTCP) +/** + * When set the txq_flags should be ignored, + * instead per-queue Tx offloads will be set on offloads field + * located on rte_eth_txq_conf struct. + * This flag is temporary till the rte_eth_txq_conf.txq_flags + * API will be deprecated. + */ +#define ETH_TXQ_FLAGS_IGNORE 0x8000 + /** * A structure used to configure a TX ring of an Ethernet port. */ struct rte_eth_txconf { struct rte_eth_thresh tx_thresh; /**< TX ring threshold registers. */ uint16_t tx_rs_thresh; /**< Drives the setting of RS bit on TXDs. */ - uint16_t tx_free_thresh; /**< Drives the freeing of TX buffers. */ + uint16_t tx_free_thresh; /**< Start freeing TX buffers if there are + less free descriptors than this value. */ + uint32_t txq_flags; /**< Set flags for the Tx queue */ uint8_t tx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */ + /** + * Per-queue Tx offloads to be set using DEV_TX_OFFLOAD_* flags. + * Only offloads set on tx_queue_offload_capa or tx_offload_capa + * fields on rte_eth_dev_info structure are allowed to be set. + */ + uint64_t offloads; +}; + +/** + * A structure contains information about HW descriptor ring limitations. + */ +struct rte_eth_desc_lim { + uint16_t nb_max; /**< Max allowed number of descriptors. */ + uint16_t nb_min; /**< Min allowed number of descriptors. */ + uint16_t nb_align; /**< Number of descriptors should be aligned to. */ + + /** + * Max allowed number of segments per whole packet. + * + * - For TSO packet this is the total number of data descriptors allowed + * by device. + * + * @see nb_mtu_seg_max + */ + uint16_t nb_seg_max; + + /** + * Max number of segments per one MTU. + * + * - For non-TSO packet, this is the maximum allowed number of segments + * in a single transmit packet. + * + * - For TSO packet each segment within the TSO may span up to this + * value. + * + * @see nb_seg_max + */ + uint16_t nb_mtu_seg_max; }; /** @@ -703,118 +848,14 @@ struct rte_fdir_conf { /** * UDP tunneling configuration. + * Used to config the UDP port for a type of tunnel. + * NICs need the UDP port to identify the tunnel type. + * Normally a type of tunnel has a default UDP port, this structure can be used + * in case if the users want to change or support more UDP port. */ struct rte_eth_udp_tunnel { - uint16_t udp_port; - uint8_t prot_type; -}; - -/** - * Possible l4type of FDIR filters. - */ -enum rte_l4type { - RTE_FDIR_L4TYPE_NONE = 0, /**< None. */ - RTE_FDIR_L4TYPE_UDP, /**< UDP. */ - RTE_FDIR_L4TYPE_TCP, /**< TCP. */ - RTE_FDIR_L4TYPE_SCTP, /**< SCTP. */ -}; - -/** - * Select IPv4 or IPv6 FDIR filters. - */ -enum rte_iptype { - RTE_FDIR_IPTYPE_IPV4 = 0, /**< IPv4. */ - RTE_FDIR_IPTYPE_IPV6 , /**< IPv6. */ -}; - -/** - * A structure used to define a FDIR packet filter. - */ -struct rte_fdir_filter { - uint16_t flex_bytes; /**< Flex bytes value to match. */ - uint16_t vlan_id; /**< VLAN ID value to match, 0 otherwise. */ - uint16_t port_src; /**< Source port to match, 0 otherwise. */ - uint16_t port_dst; /**< Destination port to match, 0 otherwise. */ - union { - uint32_t ipv4_addr; /**< IPv4 source address to match. */ - uint32_t ipv6_addr[4]; /**< IPv6 source address to match. */ - } ip_src; /**< IPv4/IPv6 source address to match (union of above). */ - union { - uint32_t ipv4_addr; /**< IPv4 destination address to match. */ - uint32_t ipv6_addr[4]; /**< IPv6 destination address to match */ - } ip_dst; /**< IPv4/IPv6 destination address to match (union of above). */ - enum rte_l4type l4type; /**< l4type to match: NONE/UDP/TCP/SCTP. */ - enum rte_iptype iptype; /**< IP packet type to match: IPv4 or IPv6. */ -}; - -/** - * A structure used to configure FDIR masks that are used by the device - * to match the various fields of RX packet headers. - * @note The only_ip_flow field has the opposite meaning compared to other - * masks! - */ -struct rte_fdir_masks { - /** When set to 1, packet l4type is \b NOT relevant in filters, and - source and destination port masks must be set to zero. */ - uint8_t only_ip_flow; - /** If set to 1, vlan_id is relevant in filters. */ - uint8_t vlan_id; - /** If set to 1, vlan_prio is relevant in filters. */ - uint8_t vlan_prio; - /** If set to 1, flexbytes is relevant in filters. */ - uint8_t flexbytes; - /** If set to 1, set the IPv6 masks. Otherwise set the IPv4 masks. */ - uint8_t set_ipv6_mask; - /** When set to 1, comparison of destination IPv6 address with IP6AT - registers is meaningful. */ - uint8_t comp_ipv6_dst; - /** Mask of Destination IPv4 Address. All bits set to 1 define the - relevant bits to use in the destination address of an IPv4 packet - when matching it against FDIR filters. */ - uint32_t dst_ipv4_mask; - /** Mask of Source IPv4 Address. All bits set to 1 define - the relevant bits to use in the source address of an IPv4 packet - when matching it against FDIR filters. */ - uint32_t src_ipv4_mask; - /** Mask of Source IPv6 Address. All bits set to 1 define the - relevant BYTES to use in the source address of an IPv6 packet - when matching it against FDIR filters. */ - uint16_t dst_ipv6_mask; - /** Mask of Destination IPv6 Address. All bits set to 1 define the - relevant BYTES to use in the destination address of an IPv6 packet - when matching it against FDIR filters. */ - uint16_t src_ipv6_mask; - /** Mask of Source Port. All bits set to 1 define the relevant - bits to use in the source port of an IP packets when matching it - against FDIR filters. */ - uint16_t src_port_mask; - /** Mask of Destination Port. All bits set to 1 define the relevant - bits to use in the destination port of an IP packet when matching it - against FDIR filters. */ - uint16_t dst_port_mask; -}; - -/** - * A structure used to report the status of the flow director filters in use. - */ -struct rte_eth_fdir { - /** Number of filters with collision indication. */ - uint16_t collision; - /** Number of free (non programmed) filters. */ - uint16_t free; - /** The Lookup hash value of the added filter that updated the value - of the MAXLEN field */ - uint16_t maxhash; - /** Longest linked list of filters in the table. */ - uint8_t maxlen; - /** Number of added filters. */ - uint64_t add; - /** Number of removed filters. */ - uint64_t remove; - /** Number of failed added filters (no more space in device). */ - uint64_t f_add; - /** Number of failed removed filters. */ - uint64_t f_remove; + uint16_t udp_port; /**< UDP port used for the tunnel. */ + uint8_t prot_type; /**< Tunnel type. Defined in rte_eth_tunnel_type. */ }; /** @@ -822,7 +863,11 @@ struct rte_eth_fdir { */ struct rte_intr_conf { /** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */ - uint16_t lsc; + uint32_t lsc:1; + /** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */ + uint32_t rxq:1; + /** enable/disable rmv interrupt. 0 (default) - disable, 1 enable */ + uint32_t rmv:1; }; /** @@ -831,10 +876,13 @@ struct rte_intr_conf { * configuration settings may be needed. */ struct rte_eth_conf { - uint16_t link_speed; - /**< ETH_LINK_SPEED_10[0|00|000], or 0 for autonegotation */ - uint16_t link_duplex; - /**< ETH_LINK_[HALF_DUPLEX|FULL_DUPLEX], or 0 for autonegotation */ + uint32_t link_speeds; /**< bitmap of ETH_LINK_SPEED_XXX of speeds to be + used. ETH_LINK_SPEED_FIXED disables link + autonegotiation, and a unique speed shall be + set. Otherwise, the bitmap defines the set of + speeds to be advertised. If the special value + ETH_LINK_SPEED_AUTONEG (0) is used, all speeds + supported are advertised. */ struct rte_eth_rxmode rxmode; /**< Port RX configuration. */ struct rte_eth_txmode txmode; /**< Port TX configuration. */ uint32_t lpbk_mode; /**< Loopback operation mode. By default the value @@ -850,7 +898,7 @@ struct rte_eth_conf { /**< Port dcb RX configuration. */ struct rte_eth_vmdq_rx_conf vmdq_rx_conf; /**< Port vmdq RX configuration. */ - } rx_adv_conf; /**< Port RX filtering configuration (union). */ + } rx_adv_conf; /**< Port RX filtering configuration. */ union { struct rte_eth_vmdq_dcb_tx_conf vmdq_dcb_tx_conf; /**< Port vmdq+dcb TX configuration. */ @@ -880,6 +928,28 @@ struct rte_eth_conf { #define DEV_RX_OFFLOAD_UDP_CKSUM 0x00000004 #define DEV_RX_OFFLOAD_TCP_CKSUM 0x00000008 #define DEV_RX_OFFLOAD_TCP_LRO 0x00000010 +#define DEV_RX_OFFLOAD_QINQ_STRIP 0x00000020 +#define DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000040 +#define DEV_RX_OFFLOAD_MACSEC_STRIP 0x00000080 +#define DEV_RX_OFFLOAD_HEADER_SPLIT 0x00000100 +#define DEV_RX_OFFLOAD_VLAN_FILTER 0x00000200 +#define DEV_RX_OFFLOAD_VLAN_EXTEND 0x00000400 +#define DEV_RX_OFFLOAD_JUMBO_FRAME 0x00000800 +#define DEV_RX_OFFLOAD_CRC_STRIP 0x00001000 +#define DEV_RX_OFFLOAD_SCATTER 0x00002000 +#define DEV_RX_OFFLOAD_TIMESTAMP 0x00004000 +#define DEV_RX_OFFLOAD_SECURITY 0x00008000 +#define DEV_RX_OFFLOAD_CHECKSUM (DEV_RX_OFFLOAD_IPV4_CKSUM | \ + DEV_RX_OFFLOAD_UDP_CKSUM | \ + DEV_RX_OFFLOAD_TCP_CKSUM) +#define DEV_RX_OFFLOAD_VLAN (DEV_RX_OFFLOAD_VLAN_STRIP | \ + DEV_RX_OFFLOAD_VLAN_FILTER | \ + DEV_RX_OFFLOAD_VLAN_EXTEND) + +/* + * If new Rx offload capabilities are defined, they also must be + * mentioned in rte_rx_offload_names in rte_ethdev.c file. + */ /** * TX offload capabilities of a device. @@ -892,9 +962,75 @@ struct rte_eth_conf { #define DEV_TX_OFFLOAD_TCP_TSO 0x00000020 #define DEV_TX_OFFLOAD_UDP_TSO 0x00000040 #define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000080 /**< Used for tunneling packet. */ +#define DEV_TX_OFFLOAD_QINQ_INSERT 0x00000100 +#define DEV_TX_OFFLOAD_VXLAN_TNL_TSO 0x00000200 /**< Used for tunneling packet. */ +#define DEV_TX_OFFLOAD_GRE_TNL_TSO 0x00000400 /**< Used for tunneling packet. */ +#define DEV_TX_OFFLOAD_IPIP_TNL_TSO 0x00000800 /**< Used for tunneling packet. */ +#define DEV_TX_OFFLOAD_GENEVE_TNL_TSO 0x00001000 /**< Used for tunneling packet. */ +#define DEV_TX_OFFLOAD_MACSEC_INSERT 0x00002000 +#define DEV_TX_OFFLOAD_MT_LOCKFREE 0x00004000 +/**< Multiple threads can invoke rte_eth_tx_burst() concurrently on the same + * tx queue without SW lock. + */ +#define DEV_TX_OFFLOAD_MULTI_SEGS 0x00008000 +/**< Device supports multi segment send. */ +#define DEV_TX_OFFLOAD_MBUF_FAST_FREE 0x00010000 +/**< Device supports optimization for fast release of mbufs. + * When set application must guarantee that per-queue all mbufs comes from + * the same mempool and has refcnt = 1. + */ +#define DEV_TX_OFFLOAD_SECURITY 0x00020000 +/** + * Device supports generic UDP tunneled packet TSO. + * Application must set PKT_TX_TUNNEL_UDP and other mbuf fields required + * for tunnel TSO. + */ +#define DEV_TX_OFFLOAD_UDP_TNL_TSO 0x00040000 +/** + * Device supports generic IP tunneled packet TSO. + * Application must set PKT_TX_TUNNEL_IP and other mbuf fields required + * for tunnel TSO. + */ +#define DEV_TX_OFFLOAD_IP_TNL_TSO 0x00080000 + +#define RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP 0x00000001 +/**< Device supports Rx queue setup after device started*/ +#define RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP 0x00000002 +/**< Device supports Tx queue setup after device started*/ + +/* + * If new Tx offload capabilities are defined, they also must be + * mentioned in rte_tx_offload_names in rte_ethdev.c file. + */ +struct rte_pci_device; + +/* + * Fallback default preferred Rx/Tx port parameters. + * These are used if an application requests default parameters + * but the PMD does not provide preferred values. + */ +#define RTE_ETH_DEV_FALLBACK_RX_RINGSIZE 512 +#define RTE_ETH_DEV_FALLBACK_TX_RINGSIZE 512 +#define RTE_ETH_DEV_FALLBACK_RX_NBQUEUES 1 +#define RTE_ETH_DEV_FALLBACK_TX_NBQUEUES 1 + +/** + * Preferred Rx/Tx port parameters. + * There are separate instances of this structure for transmission + * and reception respectively. + */ +struct rte_eth_dev_portconf { + uint16_t burst_size; /**< Device-preferred burst size */ + uint16_t ring_size; /**< Device-preferred size of queue rings */ + uint16_t nb_queues; /**< Device-preferred number of queues */ +}; + +/** + * Ethernet device information + */ struct rte_eth_dev_info { - struct rte_pci_device *pci_dev; /**< Device PCI information. */ + struct rte_device *device; /** Generic device information */ const char *driver_name; /**< Device Driver name. */ unsigned int if_index; /**< Index to bound host interface, or 0 if none. Use if_indextoname() to translate into an interface name. */ @@ -907,10 +1043,17 @@ struct rte_eth_dev_info { /** Maximum number of hash MAC addresses for MTA and UTA. */ uint16_t max_vfs; /**< Maximum number of VFs. */ uint16_t max_vmdq_pools; /**< Maximum number of VMDq pools. */ - uint32_t rx_offload_capa; /**< Device RX offload capabilities. */ - uint32_t tx_offload_capa; /**< Device TX offload capabilities. */ + uint64_t rx_offload_capa; + /**< Device per port RX offload capabilities. */ + uint64_t tx_offload_capa; + /**< Device per port TX offload capabilities. */ + uint64_t rx_queue_offload_capa; + /**< Device per queue RX offload capabilities. */ + uint64_t tx_queue_offload_capa; + /**< Device per queue TX offload capabilities. */ uint16_t reta_size; /**< Device redirection table size, the total number of entries. */ + uint8_t hash_key_size; /**< Hash key size in bytes */ /** Bit mask of RSS offloads, the bit offset also means flow type */ uint64_t flow_type_rss_offloads; struct rte_eth_rxconf default_rxconf; /**< Default RX configuration */ @@ -918,539 +1061,193 @@ struct rte_eth_dev_info { uint16_t vmdq_queue_base; /**< First queue ID for VMDQ pools. */ uint16_t vmdq_queue_num; /**< Queue number for VMDQ pools. */ uint16_t vmdq_pool_base; /**< First ID of VMDQ pools. */ + struct rte_eth_desc_lim rx_desc_lim; /**< RX descriptors limits */ + struct rte_eth_desc_lim tx_desc_lim; /**< TX descriptors limits */ + uint32_t speed_capa; /**< Supported speeds bitmap (ETH_LINK_SPEED_). */ + /** Configured number of rx/tx queues */ + uint16_t nb_rx_queues; /**< Number of RX queues. */ + uint16_t nb_tx_queues; /**< Number of TX queues. */ + /** Rx parameter recommendations */ + struct rte_eth_dev_portconf default_rxportconf; + /** Tx parameter recommendations */ + struct rte_eth_dev_portconf default_txportconf; + /** Generic device capabilities (RTE_ETH_DEV_CAPA_). */ + uint64_t dev_capa; }; +/** + * Ethernet device RX queue information structure. + * Used to retieve information about configured queue. + */ +struct rte_eth_rxq_info { + struct rte_mempool *mp; /**< mempool used by that queue. */ + struct rte_eth_rxconf conf; /**< queue config parameters. */ + uint8_t scattered_rx; /**< scattered packets RX supported. */ + uint16_t nb_desc; /**< configured number of RXDs. */ +} __rte_cache_min_aligned; + +/** + * Ethernet device TX queue information structure. + * Used to retrieve information about configured queue. + */ +struct rte_eth_txq_info { + struct rte_eth_txconf conf; /**< queue config parameters. */ + uint16_t nb_desc; /**< configured number of TXDs. */ +} __rte_cache_min_aligned; + /** Maximum name length for extended statistics counters */ #define RTE_ETH_XSTATS_NAME_SIZE 64 /** * An Ethernet device extended statistic structure * - * This structure is used by ethdev->eth_xstats_get() to provide - * statistics that are not provided in the generic rte_eth_stats + * This structure is used by rte_eth_xstats_get() to provide + * statistics that are not provided in the generic *rte_eth_stats* * structure. + * It maps a name id, corresponding to an index in the array returned + * by rte_eth_xstats_get_names(), to a statistic value. */ -struct rte_eth_xstats { - char name[RTE_ETH_XSTATS_NAME_SIZE]; - uint64_t value; +struct rte_eth_xstat { + uint64_t id; /**< The index in xstats name array. */ + uint64_t value; /**< The statistic counter value. */ }; -struct rte_eth_dev; - -struct rte_eth_dev_callback; -/** @internal Structure to keep track of registered callbacks */ -TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback); - -/* - * Definitions of all functions exported by an Ethernet driver through the - * the generic structure of type *eth_dev_ops* supplied in the *rte_eth_dev* - * structure associated with an Ethernet device. +/** + * A name element for extended statistics. + * + * An array of this structure is returned by rte_eth_xstats_get_names(). + * It lists the names of extended statistics for a PMD. The *rte_eth_xstat* + * structure references these names by their array index. */ +struct rte_eth_xstat_name { + char name[RTE_ETH_XSTATS_NAME_SIZE]; /**< The statistic name. */ +}; -typedef int (*eth_dev_configure_t)(struct rte_eth_dev *dev); -/**< @internal Ethernet device configuration. */ - -typedef int (*eth_dev_start_t)(struct rte_eth_dev *dev); -/**< @internal Function used to start a configured Ethernet device. */ - -typedef void (*eth_dev_stop_t)(struct rte_eth_dev *dev); -/**< @internal Function used to stop a configured Ethernet device. */ - -typedef int (*eth_dev_set_link_up_t)(struct rte_eth_dev *dev); -/**< @internal Function used to link up a configured Ethernet device. */ - -typedef int (*eth_dev_set_link_down_t)(struct rte_eth_dev *dev); -/**< @internal Function used to link down a configured Ethernet device. */ - -typedef void (*eth_dev_close_t)(struct rte_eth_dev *dev); -/**< @internal Function used to close a configured Ethernet device. */ - -typedef void (*eth_promiscuous_enable_t)(struct rte_eth_dev *dev); -/**< @internal Function used to enable the RX promiscuous mode of an Ethernet device. */ - -typedef void (*eth_promiscuous_disable_t)(struct rte_eth_dev *dev); -/**< @internal Function used to disable the RX promiscuous mode of an Ethernet device. */ - -typedef void (*eth_allmulticast_enable_t)(struct rte_eth_dev *dev); -/**< @internal Enable the receipt of all multicast packets by an Ethernet device. */ - -typedef void (*eth_allmulticast_disable_t)(struct rte_eth_dev *dev); -/**< @internal Disable the receipt of all multicast packets by an Ethernet device. */ - -typedef int (*eth_link_update_t)(struct rte_eth_dev *dev, - int wait_to_complete); -/**< @internal Get link speed, duplex mode and state (up/down) of an Ethernet device. */ - -typedef void (*eth_stats_get_t)(struct rte_eth_dev *dev, - struct rte_eth_stats *igb_stats); -/**< @internal Get global I/O statistics of an Ethernet device. */ - -typedef void (*eth_stats_reset_t)(struct rte_eth_dev *dev); -/**< @internal Reset global I/O statistics of an Ethernet device to 0. */ - -typedef int (*eth_xstats_get_t)(struct rte_eth_dev *dev, - struct rte_eth_xstats *stats, unsigned n); -/**< @internal Get extended stats of an Ethernet device. */ - -typedef void (*eth_xstats_reset_t)(struct rte_eth_dev *dev); -/**< @internal Reset extended stats of an Ethernet device. */ - -typedef int (*eth_queue_stats_mapping_set_t)(struct rte_eth_dev *dev, - uint16_t queue_id, - uint8_t stat_idx, - uint8_t is_rx); -/**< @internal Set a queue statistics mapping for a tx/rx queue of an Ethernet device. */ - -typedef void (*eth_dev_infos_get_t)(struct rte_eth_dev *dev, - struct rte_eth_dev_info *dev_info); -/**< @internal Get specific informations of an Ethernet device. */ - -typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev, - uint16_t queue_id); -/**< @internal Start rx and tx of a queue of an Ethernet device. */ - -typedef int (*eth_queue_stop_t)(struct rte_eth_dev *dev, - uint16_t queue_id); -/**< @internal Stop rx and tx of a queue of an Ethernet device. */ - -typedef int (*eth_rx_queue_setup_t)(struct rte_eth_dev *dev, - uint16_t rx_queue_id, - uint16_t nb_rx_desc, - unsigned int socket_id, - const struct rte_eth_rxconf *rx_conf, - struct rte_mempool *mb_pool); -/**< @internal Set up a receive queue of an Ethernet device. */ - -typedef int (*eth_tx_queue_setup_t)(struct rte_eth_dev *dev, - uint16_t tx_queue_id, - uint16_t nb_tx_desc, - unsigned int socket_id, - const struct rte_eth_txconf *tx_conf); -/**< @internal Setup a transmit queue of an Ethernet device. */ - -typedef void (*eth_queue_release_t)(void *queue); -/**< @internal Release memory resources allocated by given RX/TX queue. */ - -typedef uint32_t (*eth_rx_queue_count_t)(struct rte_eth_dev *dev, - uint16_t rx_queue_id); -/**< @Get number of available descriptors on a receive queue of an Ethernet device. */ - -typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset); -/**< @Check DD bit of specific RX descriptor */ - -typedef int (*mtu_set_t)(struct rte_eth_dev *dev, uint16_t mtu); -/**< @internal Set MTU. */ - -typedef int (*vlan_filter_set_t)(struct rte_eth_dev *dev, - uint16_t vlan_id, - int on); -/**< @internal filtering of a VLAN Tag Identifier by an Ethernet device. */ - -typedef void (*vlan_tpid_set_t)(struct rte_eth_dev *dev, - uint16_t tpid); -/**< @internal set the outer VLAN-TPID by an Ethernet device. */ - -typedef void (*vlan_offload_set_t)(struct rte_eth_dev *dev, int mask); -/**< @internal set VLAN offload function by an Ethernet device. */ - -typedef int (*vlan_pvid_set_t)(struct rte_eth_dev *dev, - uint16_t vlan_id, - int on); -/**< @internal set port based TX VLAN insertion by an Ethernet device. */ - -typedef void (*vlan_strip_queue_set_t)(struct rte_eth_dev *dev, - uint16_t rx_queue_id, - int on); -/**< @internal VLAN stripping enable/disable by an queue of Ethernet device. */ - -typedef uint16_t (*eth_rx_burst_t)(void *rxq, - struct rte_mbuf **rx_pkts, - uint16_t nb_pkts); -/**< @internal Retrieve input packets from a receive queue of an Ethernet device. */ - -typedef uint16_t (*eth_tx_burst_t)(void *txq, - struct rte_mbuf **tx_pkts, - uint16_t nb_pkts); -/**< @internal Send output packets on a transmit queue of an Ethernet device. */ - -typedef int (*fdir_add_signature_filter_t)(struct rte_eth_dev *dev, - struct rte_fdir_filter *fdir_ftr, - uint8_t rx_queue); -/**< @internal Setup a new signature filter rule on an Ethernet device */ - -typedef int (*fdir_update_signature_filter_t)(struct rte_eth_dev *dev, - struct rte_fdir_filter *fdir_ftr, - uint8_t rx_queue); -/**< @internal Update a signature filter rule on an Ethernet device */ - -typedef int (*fdir_remove_signature_filter_t)(struct rte_eth_dev *dev, - struct rte_fdir_filter *fdir_ftr); -/**< @internal Remove a signature filter rule on an Ethernet device */ - -typedef void (*fdir_infos_get_t)(struct rte_eth_dev *dev, - struct rte_eth_fdir *fdir); -/**< @internal Get information about fdir status */ - -typedef int (*fdir_add_perfect_filter_t)(struct rte_eth_dev *dev, - struct rte_fdir_filter *fdir_ftr, - uint16_t soft_id, uint8_t rx_queue, - uint8_t drop); -/**< @internal Setup a new perfect filter rule on an Ethernet device */ - -typedef int (*fdir_update_perfect_filter_t)(struct rte_eth_dev *dev, - struct rte_fdir_filter *fdir_ftr, - uint16_t soft_id, uint8_t rx_queue, - uint8_t drop); -/**< @internal Update a perfect filter rule on an Ethernet device */ - -typedef int (*fdir_remove_perfect_filter_t)(struct rte_eth_dev *dev, - struct rte_fdir_filter *fdir_ftr, - uint16_t soft_id); -/**< @internal Remove a perfect filter rule on an Ethernet device */ - -typedef int (*fdir_set_masks_t)(struct rte_eth_dev *dev, - struct rte_fdir_masks *fdir_masks); -/**< @internal Setup flow director masks on an Ethernet device */ - -typedef int (*flow_ctrl_get_t)(struct rte_eth_dev *dev, - struct rte_eth_fc_conf *fc_conf); -/**< @internal Get current flow control parameter on an Ethernet device */ - -typedef int (*flow_ctrl_set_t)(struct rte_eth_dev *dev, - struct rte_eth_fc_conf *fc_conf); -/**< @internal Setup flow control parameter on an Ethernet device */ - -typedef int (*priority_flow_ctrl_set_t)(struct rte_eth_dev *dev, - struct rte_eth_pfc_conf *pfc_conf); -/**< @internal Setup priority flow control parameter on an Ethernet device */ - -typedef int (*reta_update_t)(struct rte_eth_dev *dev, - struct rte_eth_rss_reta_entry64 *reta_conf, - uint16_t reta_size); -/**< @internal Update RSS redirection table on an Ethernet device */ - -typedef int (*reta_query_t)(struct rte_eth_dev *dev, - struct rte_eth_rss_reta_entry64 *reta_conf, - uint16_t reta_size); -/**< @internal Query RSS redirection table on an Ethernet device */ - -typedef int (*rss_hash_update_t)(struct rte_eth_dev *dev, - struct rte_eth_rss_conf *rss_conf); -/**< @internal Update RSS hash configuration of an Ethernet device */ - -typedef int (*rss_hash_conf_get_t)(struct rte_eth_dev *dev, - struct rte_eth_rss_conf *rss_conf); -/**< @internal Get current RSS hash configuration of an Ethernet device */ - -typedef int (*eth_dev_led_on_t)(struct rte_eth_dev *dev); -/**< @internal Turn on SW controllable LED on an Ethernet device */ - -typedef int (*eth_dev_led_off_t)(struct rte_eth_dev *dev); -/**< @internal Turn off SW controllable LED on an Ethernet device */ - -typedef void (*eth_mac_addr_remove_t)(struct rte_eth_dev *dev, uint32_t index); -/**< @internal Remove MAC address from receive address register */ - -typedef void (*eth_mac_addr_add_t)(struct rte_eth_dev *dev, - struct ether_addr *mac_addr, - uint32_t index, - uint32_t vmdq); -/**< @internal Set a MAC address into Receive Address Address Register */ - -typedef void (*eth_mac_addr_set_t)(struct rte_eth_dev *dev, - struct ether_addr *mac_addr); -/**< @internal Set a MAC address into Receive Address Address Register */ - -typedef int (*eth_uc_hash_table_set_t)(struct rte_eth_dev *dev, - struct ether_addr *mac_addr, - uint8_t on); -/**< @internal Set a Unicast Hash bitmap */ - -typedef int (*eth_uc_all_hash_table_set_t)(struct rte_eth_dev *dev, - uint8_t on); -/**< @internal Set all Unicast Hash bitmap */ - -typedef int (*eth_set_vf_rx_mode_t)(struct rte_eth_dev *dev, - uint16_t vf, - uint16_t rx_mode, - uint8_t on); -/**< @internal Set a VF receive mode */ - -typedef int (*eth_set_vf_rx_t)(struct rte_eth_dev *dev, - uint16_t vf, - uint8_t on); -/**< @internal Set a VF receive mode */ - -typedef int (*eth_set_vf_tx_t)(struct rte_eth_dev *dev, - uint16_t vf, - uint8_t on); -/**< @internal Enable or disable a VF transmit */ - -typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev, - uint16_t vlan, - uint64_t vf_mask, - uint8_t vlan_on); -/**< @internal Set VF VLAN pool filter */ - -typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev, - uint16_t queue_idx, - uint16_t tx_rate); -/**< @internal Set queue TX rate */ - -typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev, - uint16_t vf, - uint16_t tx_rate, - uint64_t q_msk); -/**< @internal Set VF TX rate */ - -typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev, - struct rte_eth_vmdq_mirror_conf *mirror_conf, - uint8_t rule_id, - uint8_t on); -/**< @internal Add a traffic mirroring rule on an Ethernet device */ - -typedef int (*eth_mirror_rule_reset_t)(struct rte_eth_dev *dev, - uint8_t rule_id); -/**< @internal Remove a traffic mirroring rule on an Ethernet device */ - -typedef int (*eth_udp_tunnel_add_t)(struct rte_eth_dev *dev, - struct rte_eth_udp_tunnel *tunnel_udp); -/**< @internal Add tunneling UDP info */ - -typedef int (*eth_udp_tunnel_del_t)(struct rte_eth_dev *dev, - struct rte_eth_udp_tunnel *tunnel_udp); -/**< @internal Delete tunneling UDP info */ - - -#ifdef RTE_NIC_BYPASS +#define ETH_DCB_NUM_TCS 8 +#define ETH_MAX_VMDQ_POOL 64 -enum { - RTE_BYPASS_MODE_NONE, - RTE_BYPASS_MODE_NORMAL, - RTE_BYPASS_MODE_BYPASS, - RTE_BYPASS_MODE_ISOLATE, - RTE_BYPASS_MODE_NUM, +/** + * A structure used to get the information of queue and + * TC mapping on both TX and RX paths. + */ +struct rte_eth_dcb_tc_queue_mapping { + /** rx queues assigned to tc per Pool */ + struct { + uint8_t base; + uint8_t nb_queue; + } tc_rxq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS]; + /** rx queues assigned to tc per Pool */ + struct { + uint8_t base; + uint8_t nb_queue; + } tc_txq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS]; }; -#define RTE_BYPASS_MODE_VALID(x) \ - ((x) > RTE_BYPASS_MODE_NONE && (x) < RTE_BYPASS_MODE_NUM) - -enum { - RTE_BYPASS_EVENT_NONE, - RTE_BYPASS_EVENT_START, - RTE_BYPASS_EVENT_OS_ON = RTE_BYPASS_EVENT_START, - RTE_BYPASS_EVENT_POWER_ON, - RTE_BYPASS_EVENT_OS_OFF, - RTE_BYPASS_EVENT_POWER_OFF, - RTE_BYPASS_EVENT_TIMEOUT, - RTE_BYPASS_EVENT_NUM +/** + * A structure used to get the information of DCB. + * It includes TC UP mapping and queue TC mapping. + */ +struct rte_eth_dcb_info { + uint8_t nb_tcs; /**< number of TCs */ + uint8_t prio_tc[ETH_DCB_NUM_USER_PRIORITIES]; /**< Priority to tc */ + uint8_t tc_bws[ETH_DCB_NUM_TCS]; /**< TX BW percentage for each TC */ + /** rx queues assigned to tc */ + struct rte_eth_dcb_tc_queue_mapping tc_queue; }; -#define RTE_BYPASS_EVENT_VALID(x) \ - ((x) > RTE_BYPASS_EVENT_NONE && (x) < RTE_BYPASS_MODE_NUM) - -enum { - RTE_BYPASS_TMT_OFF, /* timeout disabled. */ - RTE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */ - RTE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */ - RTE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */ - RTE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */ - RTE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */ - RTE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */ - RTE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */ - RTE_BYPASS_TMT_NUM -}; +/** + * RX/TX queue states + */ +#define RTE_ETH_QUEUE_STATE_STOPPED 0 +#define RTE_ETH_QUEUE_STATE_STARTED 1 -#define RTE_BYPASS_TMT_VALID(x) \ - ((x) == RTE_BYPASS_TMT_OFF || \ - ((x) > RTE_BYPASS_TMT_OFF && (x) < RTE_BYPASS_TMT_NUM)) - -typedef void (*bypass_init_t)(struct rte_eth_dev *dev); -typedef int32_t (*bypass_state_set_t)(struct rte_eth_dev *dev, uint32_t *new_state); -typedef int32_t (*bypass_state_show_t)(struct rte_eth_dev *dev, uint32_t *state); -typedef int32_t (*bypass_event_set_t)(struct rte_eth_dev *dev, uint32_t state, uint32_t event); -typedef int32_t (*bypass_event_show_t)(struct rte_eth_dev *dev, uint32_t event_shift, uint32_t *event); -typedef int32_t (*bypass_wd_timeout_set_t)(struct rte_eth_dev *dev, uint32_t timeout); -typedef int32_t (*bypass_wd_timeout_show_t)(struct rte_eth_dev *dev, uint32_t *wd_timeout); -typedef int32_t (*bypass_ver_show_t)(struct rte_eth_dev *dev, uint32_t *ver); -typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev); -#endif +#define RTE_ETH_ALL RTE_MAX_ETHPORTS -typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev, - enum rte_filter_type filter_type, - enum rte_filter_op filter_op, - void *arg); -/**< @internal Take operations to assigned filter type on an Ethernet device */ - -/** - * @internal A structure containing the functions exported by an Ethernet driver. - */ -struct eth_dev_ops { - eth_dev_configure_t dev_configure; /**< Configure device. */ - eth_dev_start_t dev_start; /**< Start device. */ - eth_dev_stop_t dev_stop; /**< Stop device. */ - eth_dev_set_link_up_t dev_set_link_up; /**< Device link up. */ - eth_dev_set_link_down_t dev_set_link_down; /**< Device link down. */ - eth_dev_close_t dev_close; /**< Close device. */ - eth_promiscuous_enable_t promiscuous_enable; /**< Promiscuous ON. */ - eth_promiscuous_disable_t promiscuous_disable;/**< Promiscuous OFF. */ - eth_allmulticast_enable_t allmulticast_enable;/**< RX multicast ON. */ - eth_allmulticast_disable_t allmulticast_disable;/**< RX multicast OF. */ - eth_link_update_t link_update; /**< Get device link state. */ - eth_stats_get_t stats_get; /**< Get generic device statistics. */ - eth_stats_reset_t stats_reset; /**< Reset generic device statistics. */ - eth_xstats_get_t xstats_get; /**< Get extended device statistics. */ - eth_xstats_reset_t xstats_reset; /**< Reset extended device statistics. */ - eth_queue_stats_mapping_set_t queue_stats_mapping_set; - /**< Configure per queue stat counter mapping. */ - eth_dev_infos_get_t dev_infos_get; /**< Get device info. */ - mtu_set_t mtu_set; /**< Set MTU. */ - vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */ - vlan_tpid_set_t vlan_tpid_set; /**< Outer VLAN TPID Setup. */ - vlan_strip_queue_set_t vlan_strip_queue_set; /**< VLAN Stripping on queue. */ - vlan_offload_set_t vlan_offload_set; /**< Set VLAN Offload. */ - vlan_pvid_set_t vlan_pvid_set; /**< Set port based TX VLAN insertion */ - eth_queue_start_t rx_queue_start;/**< Start RX for a queue.*/ - eth_queue_stop_t rx_queue_stop;/**< Stop RX for a queue.*/ - eth_queue_start_t tx_queue_start;/**< Start TX for a queue.*/ - eth_queue_stop_t tx_queue_stop;/**< Stop TX for a queue.*/ - eth_rx_queue_setup_t rx_queue_setup;/**< Set up device RX queue.*/ - eth_queue_release_t rx_queue_release;/**< Release RX queue.*/ - eth_rx_queue_count_t rx_queue_count; /**< Get Rx queue count. */ - eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit */ - eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue.*/ - eth_queue_release_t tx_queue_release;/**< Release TX queue.*/ - eth_dev_led_on_t dev_led_on; /**< Turn on LED. */ - eth_dev_led_off_t dev_led_off; /**< Turn off LED. */ - flow_ctrl_get_t flow_ctrl_get; /**< Get flow control. */ - flow_ctrl_set_t flow_ctrl_set; /**< Setup flow control. */ - priority_flow_ctrl_set_t priority_flow_ctrl_set; /**< Setup priority flow control.*/ - eth_mac_addr_remove_t mac_addr_remove; /**< Remove MAC address */ - eth_mac_addr_add_t mac_addr_add; /**< Add a MAC address */ - eth_mac_addr_set_t mac_addr_set; /**< Set a MAC address */ - eth_uc_hash_table_set_t uc_hash_table_set; /**< Set Unicast Table Array */ - eth_uc_all_hash_table_set_t uc_all_hash_table_set; /**< Set Unicast hash bitmap */ - eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule.*/ - eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule.*/ - eth_set_vf_rx_mode_t set_vf_rx_mode; /**< Set VF RX mode */ - eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive */ - eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit */ - eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter */ - eth_udp_tunnel_add_t udp_tunnel_add; - eth_udp_tunnel_del_t udp_tunnel_del; - eth_set_queue_rate_limit_t set_queue_rate_limit; /**< Set queue rate limit */ - eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit */ - - /** Add a signature filter. */ - fdir_add_signature_filter_t fdir_add_signature_filter; - /** Update a signature filter. */ - fdir_update_signature_filter_t fdir_update_signature_filter; - /** Remove a signature filter. */ - fdir_remove_signature_filter_t fdir_remove_signature_filter; - /** Get information about FDIR status. */ - fdir_infos_get_t fdir_infos_get; - /** Add a perfect filter. */ - fdir_add_perfect_filter_t fdir_add_perfect_filter; - /** Update a perfect filter. */ - fdir_update_perfect_filter_t fdir_update_perfect_filter; - /** Remove a perfect filter. */ - fdir_remove_perfect_filter_t fdir_remove_perfect_filter; - /** Setup masks for FDIR filtering. */ - fdir_set_masks_t fdir_set_masks; - /** Update redirection table. */ - reta_update_t reta_update; - /** Query redirection table. */ - reta_query_t reta_query; - /* bypass control */ -#ifdef RTE_NIC_BYPASS - bypass_init_t bypass_init; - bypass_state_set_t bypass_state_set; - bypass_state_show_t bypass_state_show; - bypass_event_set_t bypass_event_set; - bypass_event_show_t bypass_event_show; - bypass_wd_timeout_set_t bypass_wd_timeout_set; - bypass_wd_timeout_show_t bypass_wd_timeout_show; - bypass_ver_show_t bypass_ver_show; - bypass_wd_reset_t bypass_wd_reset; -#endif +/* Macros to check for valid port */ +#define RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, retval) do { \ + if (!rte_eth_dev_is_valid_port(port_id)) { \ + RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); \ + return retval; \ + } \ +} while (0) - /** Configure RSS hash protocols. */ - rss_hash_update_t rss_hash_update; - /** Get current RSS hash configuration. */ - rss_hash_conf_get_t rss_hash_conf_get; - eth_filter_ctrl_t filter_ctrl; /**< common filter control*/ -}; +#define RTE_ETH_VALID_PORTID_OR_RET(port_id) do { \ + if (!rte_eth_dev_is_valid_port(port_id)) { \ + RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); \ + return; \ + } \ +} while (0) + +/** + * l2 tunnel configuration. + */ + +/**< l2 tunnel enable mask */ +#define ETH_L2_TUNNEL_ENABLE_MASK 0x00000001 +/**< l2 tunnel insertion mask */ +#define ETH_L2_TUNNEL_INSERTION_MASK 0x00000002 +/**< l2 tunnel stripping mask */ +#define ETH_L2_TUNNEL_STRIPPING_MASK 0x00000004 +/**< l2 tunnel forwarding mask */ +#define ETH_L2_TUNNEL_FORWARDING_MASK 0x00000008 /** - * Function type used for callbacks for processing packets on RX and TX + * Function type used for RX packet processing packet callbacks. * - * If configured for RX, it is called with a burst of packets that have just - * been received on the given port and queue. On TX, it is called with a burst - * of packets immediately before those packets are put onto the hardware queue - * for transmission. + * The callback function is called on RX with a burst of packets that have + * been received on the given port and queue. * - * @param port - * The ethernet port on which rx or tx is being performed + * @param port_id + * The Ethernet port on which RX is being performed. * @param queue - * The queue on the ethernet port which is being used to receive or transmit - * the packets. + * The queue on the Ethernet port which is being used to receive the packets. * @param pkts - * The burst of packets on which processing is to be done. On RX, these - * packets have just been received. On TX, they are about to be transmitted. + * The burst of packets that have just been received. * @param nb_pkts - * The number of packets in the burst pointed to by "pkts" + * The number of packets in the burst pointed to by "pkts". + * @param max_pkts + * The max number of packets that can be stored in the "pkts" array. * @param user_param * The arbitrary user parameter passed in by the application when the callback * was originally configured. * @return - * The number of packets remaining in pkts are processing. - * * On RX, this will be returned to the user as the return value from - * rte_eth_rx_burst. - * * On TX, this will be the number of packets actually written to the NIC. + * The number of packets returned to the user. */ -typedef uint16_t (*rte_rxtx_callback_fn)(uint8_t port, uint16_t queue, - struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param); +typedef uint16_t (*rte_rx_callback_fn)(uint16_t port_id, uint16_t queue, + struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t max_pkts, + void *user_param); /** - * @internal - * Structure used to hold information about the callbacks to be called for a - * queue on RX and TX. + * Function type used for TX packet processing packet callbacks. + * + * The callback function is called on TX with a burst of packets immediately + * before the packets are put onto the hardware queue for transmission. + * + * @param port_id + * The Ethernet port on which TX is being performed. + * @param queue + * The queue on the Ethernet port which is being used to transmit the packets. + * @param pkts + * The burst of packets that are about to be transmitted. + * @param nb_pkts + * The number of packets in the burst pointed to by "pkts". + * @param user_param + * The arbitrary user parameter passed in by the application when the callback + * was originally configured. + * @return + * The number of packets to be written to the NIC. */ -struct rte_eth_rxtx_callback { - struct rte_eth_rxtx_callback *next; - rte_rxtx_callback_fn fn; - void *param; -}; +typedef uint16_t (*rte_tx_callback_fn)(uint16_t port_id, uint16_t queue, + struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param); /** - * @internal - * The generic data structure associated with each ethernet device. - * - * Pointers to burst-oriented packet receive and transmit functions are - * located at the beginning of the structure, along with the pointer to - * where all the data elements for the particular device are stored in shared - * memory. This split allows the function pointer and driver data to be per- - * process, while the actual configuration data for the device is shared. - */ -struct rte_eth_dev { - eth_rx_burst_t rx_pkt_burst; /**< Pointer to PMD receive function. */ - eth_tx_burst_t tx_pkt_burst; /**< Pointer to PMD transmit function. */ - struct rte_eth_dev_data *data; /**< Pointer to device data */ - const struct eth_driver *driver;/**< Driver for this device */ - struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */ - struct rte_pci_device *pci_dev; /**< PCI info. supplied by probing */ - /** User application callbacks for NIC interrupts */ - struct rte_eth_dev_cb_list link_intr_cbs; - /** - * User-supplied functions called from rx_burst to post-process - * received packets before passing them to the user - */ - struct rte_eth_rxtx_callback **post_rx_burst_cbs; - /** - * User-supplied functions called from tx_burst to pre-process - * received packets before passing them to the driver for transmission. - */ - struct rte_eth_rxtx_callback **pre_tx_burst_cbs; + * A set of values to describe the possible states of an eth device. + */ +enum rte_eth_dev_state { + RTE_ETH_DEV_UNUSED = 0, + RTE_ETH_DEV_ATTACHED, + RTE_ETH_DEV_DEFERRED, + RTE_ETH_DEV_REMOVED, }; struct rte_eth_dev_sriov { @@ -1461,144 +1258,241 @@ struct rte_eth_dev_sriov { }; #define RTE_ETH_DEV_SRIOV(dev) ((dev)->data->sriov) -#define RTE_ETH_NAME_MAX_LEN (32) +#define RTE_ETH_NAME_MAX_LEN RTE_DEV_NAME_MAX_LEN + +#define RTE_ETH_DEV_NO_OWNER 0 + +#define RTE_ETH_MAX_OWNER_NAME_LEN 64 + +struct rte_eth_dev_owner { + uint64_t id; /**< The owner unique identifier. */ + char name[RTE_ETH_MAX_OWNER_NAME_LEN]; /**< The owner name. */ +}; + +/** Device supports link state interrupt */ +#define RTE_ETH_DEV_INTR_LSC 0x0002 +/** Device is a bonded slave */ +#define RTE_ETH_DEV_BONDED_SLAVE 0x0004 +/** Device supports device removal interrupt */ +#define RTE_ETH_DEV_INTR_RMV 0x0008 /** - * @internal - * The data part, with no function pointers, associated with each ethernet device. + * Iterates over valid ethdev ports owned by a specific owner. * - * This structure is safe to place in shared memory to be common among different - * processes in a multi-process configuration. + * @param port_id + * The id of the next possible valid owned port. + * @param owner_id + * The owner identifier. + * RTE_ETH_DEV_NO_OWNER means iterate over all valid ownerless ports. + * @return + * Next valid port id owned by owner_id, RTE_MAX_ETHPORTS if there is none. */ -struct rte_eth_dev_data { - char name[RTE_ETH_NAME_MAX_LEN]; /**< Unique identifier name */ +uint64_t rte_eth_find_next_owned_by(uint16_t port_id, + const uint64_t owner_id); - void **rx_queues; /**< Array of pointers to RX queues. */ - void **tx_queues; /**< Array of pointers to TX queues. */ - uint16_t nb_rx_queues; /**< Number of RX queues. */ - uint16_t nb_tx_queues; /**< Number of TX queues. */ +/** + * Macro to iterate over all enabled ethdev ports owned by a specific owner. + */ +#define RTE_ETH_FOREACH_DEV_OWNED_BY(p, o) \ + for (p = rte_eth_find_next_owned_by(0, o); \ + (unsigned int)p < (unsigned int)RTE_MAX_ETHPORTS; \ + p = rte_eth_find_next_owned_by(p + 1, o)) - struct rte_eth_dev_sriov sriov; /**< SRIOV data */ +/** + * Iterates over valid ethdev ports. + * + * @param port_id + * The id of the next possible valid port. + * @return + * Next valid port id, RTE_MAX_ETHPORTS if there is none. + */ +uint16_t rte_eth_find_next(uint16_t port_id); - void *dev_private; /**< PMD-specific private data */ +/** + * Macro to iterate over all enabled and ownerless ethdev ports. + */ +#define RTE_ETH_FOREACH_DEV(p) \ + RTE_ETH_FOREACH_DEV_OWNED_BY(p, RTE_ETH_DEV_NO_OWNER) - struct rte_eth_link dev_link; - /**< Link-level information & status */ - struct rte_eth_conf dev_conf; /**< Configuration applied to device. */ - uint16_t mtu; /**< Maximum Transmission Unit. */ +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Get a new unique owner identifier. + * An owner identifier is used to owns Ethernet devices by only one DPDK entity + * to avoid multiple management of device by different entities. + * + * @param owner_id + * Owner identifier pointer. + * @return + * Negative errno value on error, 0 on success. + */ +int __rte_experimental rte_eth_dev_owner_new(uint64_t *owner_id); - uint32_t min_rx_buf_size; - /**< Common rx buffer size handled by all queues */ +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Set an Ethernet device owner. + * + * @param port_id + * The identifier of the port to own. + * @param owner + * The owner pointer. + * @return + * Negative errno value on error, 0 on success. + */ +int __rte_experimental rte_eth_dev_owner_set(const uint16_t port_id, + const struct rte_eth_dev_owner *owner); - uint64_t rx_mbuf_alloc_failed; /**< RX ring mbuf allocation failures. */ - struct ether_addr* mac_addrs;/**< Device Ethernet Link address. */ - uint64_t mac_pool_sel[ETH_NUM_RECEIVE_MAC_ADDR]; - /** bitmap array of associating Ethernet MAC addresses to pools */ - struct ether_addr* hash_mac_addrs; - /** Device Ethernet MAC addresses of hash filtering. */ - uint8_t port_id; /**< Device [external] port identifier. */ - uint8_t promiscuous : 1, /**< RX promiscuous mode ON(1) / OFF(0). */ - scattered_rx : 1, /**< RX of scattered packets is ON(1) / OFF(0) */ - all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */ - dev_started : 1; /**< Device state: STARTED(1) / STOPPED(0). */ -}; +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Unset Ethernet device owner to make the device ownerless. + * + * @param port_id + * The identifier of port to make ownerless. + * @param owner_id + * The owner identifier. + * @return + * 0 on success, negative errno value on error. + */ +int __rte_experimental rte_eth_dev_owner_unset(const uint16_t port_id, + const uint64_t owner_id); /** - * @internal - * The pool of *rte_eth_dev* structures. The size of the pool - * is configured at compile-time in the file. + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Remove owner from all Ethernet devices owned by a specific owner. + * + * @param owner_id + * The owner identifier. */ -extern struct rte_eth_dev rte_eth_devices[]; +void __rte_experimental rte_eth_dev_owner_delete(const uint64_t owner_id); /** - * Get the total number of Ethernet devices that have been successfully - * initialized by the [matching] Ethernet driver during the PCI probing phase. - * All devices whose port identifier is in the range - * [0, rte_eth_dev_count() - 1] can be operated on by network applications. + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. * + * Get the owner of an Ethernet device. + * + * @param port_id + * The port identifier. + * @param owner + * The owner structure pointer to fill. * @return - * - The total number of usable Ethernet devices. + * 0 on success, negative errno value on error.. */ -extern uint8_t rte_eth_dev_count(void); +int __rte_experimental rte_eth_dev_owner_get(const uint16_t port_id, + struct rte_eth_dev_owner *owner); /** - * Function for internal use by dummy drivers primarily, e.g. ring-based - * driver. - * Allocates a new ethdev slot for an ethernet device and returns the pointer - * to that slot for the driver to use. + * Get the total number of Ethernet devices that have been successfully + * initialized by the matching Ethernet driver during the PCI probing phase + * and that are available for applications to use. These devices must be + * accessed by using the ``RTE_ETH_FOREACH_DEV()`` macro to deal with + * non-contiguous ranges of devices. + * These non-contiguous ranges can be created by calls to hotplug functions or + * by some PMDs. * - * @param name Unique identifier name for each Ethernet device * @return - * - Slot in the rte_dev_devices array for a new device; + * - The total number of usable Ethernet devices. */ -struct rte_eth_dev *rte_eth_dev_allocate(const char *name); +__rte_deprecated +uint16_t rte_eth_dev_count(void); -struct eth_driver; /** - * @internal - * Initialization function of an Ethernet driver invoked for each matching - * Ethernet PCI device detected during the PCI probing phase. + * Get the number of ports which are usable for the application. * - * @param eth_drv - * The pointer to the [matching] Ethernet driver structure supplied by - * the PMD when it registered itself. - * @param eth_dev - * The *eth_dev* pointer is the address of the *rte_eth_dev* structure - * associated with the matching device and which have been [automatically] - * allocated in the *rte_eth_devices* array. - * The *eth_dev* structure is supplied to the driver initialization function - * with the following fields already initialized: + * These devices must be iterated by using the macro + * ``RTE_ETH_FOREACH_DEV`` or ``RTE_ETH_FOREACH_DEV_OWNED_BY`` + * to deal with non-contiguous ranges of devices. * - * - *pci_dev*: Holds the pointers to the *rte_pci_device* structure which - * contains the generic PCI information of the matching device. - * - * - *dev_private*: Holds a pointer to the device private data structure. + * @return + * The count of available Ethernet devices. + */ +uint16_t rte_eth_dev_count_avail(void); + +/** + * Get the total number of ports which are allocated. * - * - *mtu*: Contains the default Ethernet maximum frame length (1500). + * Some devices may not be available for the application. * - * - *port_id*: Contains the port index of the device (actually the index - * of the *eth_dev* structure in the *rte_eth_devices* array). + * @return + * The total count of Ethernet devices. + */ +uint16_t __rte_experimental rte_eth_dev_count_total(void); + +/** + * Attach a new Ethernet device specified by arguments. * + * @param devargs + * A pointer to a strings array describing the new device + * to be attached. The strings should be a pci address like + * '0000:01:00.0' or virtual device name like 'net_pcap0'. + * @param port_id + * A pointer to a port identifier actually attached. * @return - * - 0: Success, the device is properly initialized by the driver. - * In particular, the driver MUST have set up the *dev_ops* pointer - * of the *eth_dev* structure. - * - <0: Error code of the device initialization failure. + * 0 on success and port_id is filled, negative on error */ -typedef int (*eth_dev_init_t)(struct eth_driver *eth_drv, - struct rte_eth_dev *eth_dev); +int rte_eth_dev_attach(const char *devargs, uint16_t *port_id); /** - * @internal - * The structure associated with a PMD Ethernet driver. + * Detach a Ethernet device specified by port identifier. + * This function must be called when the device is in the + * closed state. * - * Each Ethernet driver acts as a PCI driver and is represented by a generic - * *eth_driver* structure that holds: + * @param port_id + * The port identifier of the device to detach. + * @param devname + * A pointer to a buffer that will be filled with the device name. + * This buffer must be at least RTE_DEV_NAME_MAX_LEN long. + * @return + * 0 on success and devname is filled, negative on error + */ +int rte_eth_dev_detach(uint16_t port_id, char *devname); + +/** + * Convert a numerical speed in Mbps to a bitmap flag that can be used in + * the bitmap link_speeds of the struct rte_eth_conf * - * - An *rte_pci_driver* structure (which must be the first field). + * @param speed + * Numerical speed value in Mbps + * @param duplex + * ETH_LINK_[HALF/FULL]_DUPLEX (only for 10/100M speeds) + * @return + * 0 if the speed cannot be mapped + */ +uint32_t rte_eth_speed_bitflag(uint32_t speed, int duplex); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice * - * - The *eth_dev_init* function invoked for each matching PCI device. + * Get DEV_RX_OFFLOAD_* flag name. * - * - The size of the private data to allocate for each matching device. + * @param offload + * Offload flag. + * @return + * Offload name or 'UNKNOWN' if the flag cannot be recognised. */ -struct eth_driver { - struct rte_pci_driver pci_drv; /**< The PMD is also a PCI driver. */ - eth_dev_init_t eth_dev_init; /**< Device init function. */ - unsigned int dev_private_size; /**< Size of device private data. */ -}; +const char * __rte_experimental rte_eth_dev_rx_offload_name(uint64_t offload); /** - * @internal - * A function invoked by the initialization function of an Ethernet driver - * to simultaneously register itself as a PCI driver and as an Ethernet - * Poll Mode Driver (PMD). + * @warning + * @b EXPERIMENTAL: this API may change without prior notice + * + * Get DEV_TX_OFFLOAD_* flag name. * - * @param eth_drv - * The pointer to the *eth_driver* structure associated with - * the Ethernet driver. + * @param offload + * Offload flag. + * @return + * Offload name or 'UNKNOWN' if the flag cannot be recognised. */ -extern void rte_eth_driver_register(struct eth_driver *eth_drv); +const char * __rte_experimental rte_eth_dev_tx_offload_name(uint64_t offload); /** * Configure an Ethernet device. @@ -1619,6 +1513,9 @@ extern void rte_eth_driver_register(struct eth_driver *eth_drv); * each statically configurable offload hardware feature provided by * Ethernet devices, such as IP checksum or VLAN tag stripping for * example. + * The Rx offload bitfield API is obsolete and will be deprecated. + * Applications should set the ignore_bitfield_offloads bit on *rxmode* + * structure and use offloads field to set per-port offloads instead. * - the Receive Side Scaling (RSS) configuration when using multiple RX * queues per port. * @@ -1629,23 +1526,35 @@ extern void rte_eth_driver_register(struct eth_driver *eth_drv); * - 0: Success, device configured. * - <0: Error code returned by the driver configuration function. */ -extern int rte_eth_dev_configure(uint8_t port_id, - uint16_t nb_rx_queue, - uint16_t nb_tx_queue, - const struct rte_eth_conf *eth_conf); +int rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_queue, + uint16_t nb_tx_queue, const struct rte_eth_conf *eth_conf); /** - * Allocate and set up a receive queue for an Ethernet device. + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. * - * The function allocates a contiguous block of memory for *nb_rx_desc* - * receive descriptors from a memory zone associated with *socket_id* - * and initializes each receive descriptor with a network buffer allocated - * from the memory pool *mb_pool*. + * Check if an Ethernet device was physically removed. * * @param port_id * The port identifier of the Ethernet device. - * @param rx_queue_id - * The index of the receive queue to set up. + * @return + * 1 when the Ethernet device is removed, otherwise 0. + */ +int __rte_experimental +rte_eth_dev_is_removed(uint16_t port_id); + +/** + * Allocate and set up a receive queue for an Ethernet device. + * + * The function allocates a contiguous block of memory for *nb_rx_desc* + * receive descriptors from a memory zone associated with *socket_id* + * and initializes each receive descriptor with a network buffer allocated + * from the memory pool *mb_pool*. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param rx_queue_id + * The index of the receive queue to set up. * The value must be in the range [0, nb_rx_queue - 1] previously supplied * to rte_eth_dev_configure(). * @param nb_rx_desc @@ -1661,11 +1570,14 @@ extern int rte_eth_dev_configure(uint8_t port_id, * The *rx_conf* structure contains an *rx_thresh* structure with the values * of the Prefetch, Host, and Write-Back threshold registers of the receive * ring. + * In addition it contains the hardware offloads features to activate using + * the DEV_RX_OFFLOAD_* flags. * @param mb_pool * The pointer to the memory pool from which to allocate *rte_mbuf* network * memory buffers to populate each descriptor of the receive ring. * @return * - 0: Success, receive queue correctly set up. + * - -EIO: if device is removed. * - -EINVAL: The size of network buffers which can be allocated from the * memory pool does not fit the various buffer sizes allowed by the * device controller. @@ -1673,10 +1585,10 @@ extern int rte_eth_dev_configure(uint8_t port_id, * allocate network memory buffers from the memory pool when * initializing receive descriptors. */ -extern int rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id, - uint16_t nb_rx_desc, unsigned int socket_id, - const struct rte_eth_rxconf *rx_conf, - struct rte_mempool *mb_pool); +int rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id, + uint16_t nb_rx_desc, unsigned int socket_id, + const struct rte_eth_rxconf *rx_conf, + struct rte_mempool *mb_pool); /** * Allocate and set up a transmit queue for an Ethernet device. @@ -1695,7 +1607,7 @@ extern int rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id, * the DMA memory allocated for the transmit descriptors of the ring. * @param tx_conf * The pointer to the configuration data to be used for the transmit queue. - * NULL value is allowed, in which case default RX configuration + * NULL value is allowed, in which case default TX configuration * will be used. * The *tx_conf* structure contains the following data: * - The *tx_thresh* structure with the values of the Prefetch, Host, and @@ -1714,6 +1626,11 @@ extern int rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id, * - The *txq_flags* member contains flags to pass to the TX queue setup * function to configure the behavior of the TX queue. This should be set * to 0 if no special configuration is required. + * This API is obsolete and will be deprecated. Applications + * should set it to ETH_TXQ_FLAGS_IGNORE and use + * the offloads field below. + * - The *offloads* member contains Tx offloads to be enabled. + * Offloads which are not set cannot be used on the datapath. * * Note that setting *tx_free_thresh* or *tx_rs_thresh* value to 0 forces * the transmit function to use default values. @@ -1721,11 +1638,11 @@ extern int rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id, * - 0: Success, the transmit queue is correctly set up. * - -ENOMEM: Unable to allocate the transmit ring descriptors. */ -extern int rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id, - uint16_t nb_tx_desc, unsigned int socket_id, - const struct rte_eth_txconf *tx_conf); +int rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id, + uint16_t nb_tx_desc, unsigned int socket_id, + const struct rte_eth_txconf *tx_conf); -/* +/** * Return the NUMA socket to which an Ethernet device is connected * * @param port_id @@ -1735,12 +1652,22 @@ extern int rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id, * a default of zero if the socket could not be determined. * -1 is returned is the port_id value is out of range. */ -extern int rte_eth_dev_socket_id(uint8_t port_id); +int rte_eth_dev_socket_id(uint16_t port_id); -/* - * Allocate mbuf from mempool, setup the DMA physical address - * and then start RX for specified queue of a port. It is used - * when rx_deferred_start flag of the specified queue is true. +/** + * Check if port_id of device is attached + * + * @param port_id + * The port identifier of the Ethernet device + * @return + * - 0 if port is out of range or not attached + * - 1 if device is attached + */ +int rte_eth_dev_is_valid_port(uint16_t port_id); + +/** + * Start specified RX queue of a port. It is used when rx_deferred_start + * flag of the specified queue is true. * * @param port_id * The port identifier of the Ethernet device @@ -1749,13 +1676,14 @@ extern int rte_eth_dev_socket_id(uint8_t port_id); * The value must be in the range [0, nb_rx_queue - 1] previously supplied * to rte_eth_dev_configure(). * @return - * - 0: Success, the transmit queue is correctly set up. + * - 0: Success, the receive queue is started. * - -EINVAL: The port_id or the queue_id out of range. + * - -EIO: if device is removed. * - -ENOTSUP: The function not supported in PMD driver. */ -extern int rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id); +int rte_eth_dev_rx_queue_start(uint16_t port_id, uint16_t rx_queue_id); -/* +/** * Stop specified RX queue of a port * * @param port_id @@ -1765,13 +1693,14 @@ extern int rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id); * The value must be in the range [0, nb_rx_queue - 1] previously supplied * to rte_eth_dev_configure(). * @return - * - 0: Success, the transmit queue is correctly set up. + * - 0: Success, the receive queue is stopped. * - -EINVAL: The port_id or the queue_id out of range. + * - -EIO: if device is removed. * - -ENOTSUP: The function not supported in PMD driver. */ -extern int rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id); +int rte_eth_dev_rx_queue_stop(uint16_t port_id, uint16_t rx_queue_id); -/* +/** * Start TX for specified queue of a port. It is used when tx_deferred_start * flag of the specified queue is true. * @@ -1782,13 +1711,14 @@ extern int rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id); * The value must be in the range [0, nb_tx_queue - 1] previously supplied * to rte_eth_dev_configure(). * @return - * - 0: Success, the transmit queue is correctly set up. + * - 0: Success, the transmit queue is started. * - -EINVAL: The port_id or the queue_id out of range. + * - -EIO: if device is removed. * - -ENOTSUP: The function not supported in PMD driver. */ -extern int rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id); +int rte_eth_dev_tx_queue_start(uint16_t port_id, uint16_t tx_queue_id); -/* +/** * Stop specified TX queue of a port * * @param port_id @@ -1798,13 +1728,12 @@ extern int rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id); * The value must be in the range [0, nb_tx_queue - 1] previously supplied * to rte_eth_dev_configure(). * @return - * - 0: Success, the transmit queue is correctly set up. + * - 0: Success, the transmit queue is stopped. * - -EINVAL: The port_id or the queue_id out of range. + * - -EIO: if device is removed. * - -ENOTSUP: The function not supported in PMD driver. */ -extern int rte_eth_dev_tx_queue_stop(uint8_t port_id, uint16_t tx_queue_id); - - +int rte_eth_dev_tx_queue_stop(uint16_t port_id, uint16_t tx_queue_id); /** * Start an Ethernet device. @@ -1821,7 +1750,7 @@ extern int rte_eth_dev_tx_queue_stop(uint8_t port_id, uint16_t tx_queue_id); * - 0: Success, Ethernet device started. * - <0: Error code of the driver device start function. */ -extern int rte_eth_dev_start(uint8_t port_id); +int rte_eth_dev_start(uint16_t port_id); /** * Stop an Ethernet device. The device can be restarted with a call to @@ -1830,8 +1759,7 @@ extern int rte_eth_dev_start(uint8_t port_id); * @param port_id * The port identifier of the Ethernet device. */ -extern void rte_eth_dev_stop(uint8_t port_id); - +void rte_eth_dev_stop(uint16_t port_id); /** * Link up an Ethernet device. @@ -1845,7 +1773,7 @@ extern void rte_eth_dev_stop(uint8_t port_id); * - 0: Success, Ethernet device linked up. * - <0: Error code of the driver device link up function. */ -extern int rte_eth_dev_set_link_up(uint8_t port_id); +int rte_eth_dev_set_link_up(uint16_t port_id); /** * Link down an Ethernet device. @@ -1856,15 +1784,56 @@ extern int rte_eth_dev_set_link_up(uint8_t port_id); * @param port_id * The port identifier of the Ethernet device. */ -extern int rte_eth_dev_set_link_down(uint8_t port_id); +int rte_eth_dev_set_link_down(uint16_t port_id); + +/** + * Close a stopped Ethernet device. The device cannot be restarted! + * The function frees all resources except for needed by the + * closed state. To free these resources, call rte_eth_dev_detach(). + * + * @param port_id + * The port identifier of the Ethernet device. + */ +void rte_eth_dev_close(uint16_t port_id); /** - * Close an Ethernet device. The device cannot be restarted! + * Reset a Ethernet device and keep its port id. + * + * When a port has to be reset passively, the DPDK application can invoke + * this function. For example when a PF is reset, all its VFs should also + * be reset. Normally a DPDK application can invoke this function when + * RTE_ETH_EVENT_INTR_RESET event is detected, but can also use it to start + * a port reset in other circumstances. + * + * When this function is called, it first stops the port and then calls the + * PMD specific dev_uninit( ) and dev_init( ) to return the port to initial + * state, in which no Tx and Rx queues are setup, as if the port has been + * reset and not started. The port keeps the port id it had before the + * function call. + * + * After calling rte_eth_dev_reset( ), the application should use + * rte_eth_dev_configure( ), rte_eth_rx_queue_setup( ), + * rte_eth_tx_queue_setup( ), and rte_eth_dev_start( ) + * to reconfigure the device as appropriate. + * + * Note: To avoid unexpected behavior, the application should stop calling + * Tx and Rx functions before calling rte_eth_dev_reset( ). For thread + * safety, all these controlling functions should be called from the same + * thread. * * @param port_id * The port identifier of the Ethernet device. + * + * @return + * - (0) if successful. + * - (-EINVAL) if port identifier is invalid. + * - (-ENOTSUP) if hardware doesn't support this function. + * - (-EPERM) if not ran from the primary process. + * - (-EIO) if re-initialisation failed or device is removed. + * - (-ENOMEM) if the reset failed due to OOM. + * - (-EAGAIN) if the reset temporarily failed and should be retried later. */ -extern void rte_eth_dev_close(uint8_t port_id); +int rte_eth_dev_reset(uint16_t port_id); /** * Enable receipt in promiscuous mode for an Ethernet device. @@ -1872,7 +1841,7 @@ extern void rte_eth_dev_close(uint8_t port_id); * @param port_id * The port identifier of the Ethernet device. */ -extern void rte_eth_promiscuous_enable(uint8_t port_id); +void rte_eth_promiscuous_enable(uint16_t port_id); /** * Disable receipt in promiscuous mode for an Ethernet device. @@ -1880,7 +1849,7 @@ extern void rte_eth_promiscuous_enable(uint8_t port_id); * @param port_id * The port identifier of the Ethernet device. */ -extern void rte_eth_promiscuous_disable(uint8_t port_id); +void rte_eth_promiscuous_disable(uint16_t port_id); /** * Return the value of promiscuous mode for an Ethernet device. @@ -1892,7 +1861,7 @@ extern void rte_eth_promiscuous_disable(uint8_t port_id); * - (0) if promiscuous is disabled. * - (-1) on error */ -extern int rte_eth_promiscuous_get(uint8_t port_id); +int rte_eth_promiscuous_get(uint16_t port_id); /** * Enable the receipt of any multicast frame by an Ethernet device. @@ -1900,7 +1869,7 @@ extern int rte_eth_promiscuous_get(uint8_t port_id); * @param port_id * The port identifier of the Ethernet device. */ -extern void rte_eth_allmulticast_enable(uint8_t port_id); +void rte_eth_allmulticast_enable(uint16_t port_id); /** * Disable the receipt of all multicast frames by an Ethernet device. @@ -1908,7 +1877,7 @@ extern void rte_eth_allmulticast_enable(uint8_t port_id); * @param port_id * The port identifier of the Ethernet device. */ -extern void rte_eth_allmulticast_disable(uint8_t port_id); +void rte_eth_allmulticast_disable(uint16_t port_id); /** * Return the value of allmulticast mode for an Ethernet device. @@ -1920,7 +1889,7 @@ extern void rte_eth_allmulticast_disable(uint8_t port_id); * - (0) if allmulticast is disabled. * - (-1) on error */ -extern int rte_eth_allmulticast_get(uint8_t port_id); +int rte_eth_allmulticast_get(uint16_t port_id); /** * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX @@ -1933,7 +1902,7 @@ extern int rte_eth_allmulticast_get(uint8_t port_id); * A pointer to an *rte_eth_link* structure to be filled with * the status, the speed and the mode of the Ethernet device link. */ -extern void rte_eth_link_get(uint8_t port_id, struct rte_eth_link *link); +void rte_eth_link_get(uint16_t port_id, struct rte_eth_link *link); /** * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX @@ -1946,8 +1915,7 @@ extern void rte_eth_link_get(uint8_t port_id, struct rte_eth_link *link); * A pointer to an *rte_eth_link* structure to be filled with * the status, the speed and the mode of the Ethernet device link. */ -extern void rte_eth_link_get_nowait(uint8_t port_id, - struct rte_eth_link *link); +void rte_eth_link_get_nowait(uint16_t port_id, struct rte_eth_link *link); /** * Retrieve the general I/O statistics of an Ethernet device. @@ -1966,15 +1934,43 @@ extern void rte_eth_link_get_nowait(uint8_t port_id, * @return * Zero if successful. Non-zero otherwise. */ -extern int rte_eth_stats_get(uint8_t port_id, struct rte_eth_stats *stats); +int rte_eth_stats_get(uint16_t port_id, struct rte_eth_stats *stats); /** * Reset the general I/O statistics of an Ethernet device. * * @param port_id * The port identifier of the Ethernet device. + * @return + * - (0) if device notified to reset stats. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_stats_reset(uint16_t port_id); + +/** + * Retrieve names of extended statistics of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param xstats_names + * An rte_eth_xstat_name array of at least *size* elements to + * be filled. If set to NULL, the function returns the required number + * of elements. + * @param size + * The size of the xstats_names array (number of elements). + * @return + * - A positive value lower or equal to size: success. The return value + * is the number of entries filled in the stats table. + * - A positive value higher than size: error, the given statistics table + * is too small. The return value corresponds to the size that should + * be given to succeed. The entries in the table are not valid and + * shall not be used by the caller. + * - A negative value on error (invalid port id). */ -extern void rte_eth_stats_reset(uint8_t port_id); +int rte_eth_xstats_get_names(uint16_t port_id, + struct rte_eth_xstat_name *xstats_names, + unsigned int size); /** * Retrieve extended statistics of an Ethernet device. @@ -1982,23 +1978,98 @@ extern void rte_eth_stats_reset(uint8_t port_id); * @param port_id * The port identifier of the Ethernet device. * @param xstats - * A pointer to a table of structure of type *rte_eth_xstats* - * to be filled with device statistics names and values. + * A pointer to a table of structure of type *rte_eth_xstat* + * to be filled with device statistics ids and values: id is the + * index of the name string in xstats_names (see rte_eth_xstats_get_names()), + * and value is the statistic counter. * This parameter can be set to NULL if n is 0. * @param n - * The size of the stats table, which should be large enough to store - * all the statistics of the device. + * The size of the xstats array (number of elements). * @return - * - positive value lower or equal to n: success. The return value + * - A positive value lower or equal to n: success. The return value * is the number of entries filled in the stats table. - * - positive value higher than n: error, the given statistics table + * - A positive value higher than n: error, the given statistics table * is too small. The return value corresponds to the size that should * be given to succeed. The entries in the table are not valid and * shall not be used by the caller. - * - negative value on error (invalid port id) + * - A negative value on error (invalid port id). */ -extern int rte_eth_xstats_get(uint8_t port_id, - struct rte_eth_xstats *xstats, unsigned n); +int rte_eth_xstats_get(uint16_t port_id, struct rte_eth_xstat *xstats, + unsigned int n); + +/** + * Retrieve names of extended statistics of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param xstats_names + * An rte_eth_xstat_name array of at least *size* elements to + * be filled. If set to NULL, the function returns the required number + * of elements. + * @param ids + * IDs array given by app to retrieve specific statistics + * @param size + * The size of the xstats_names array (number of elements). + * @return + * - A positive value lower or equal to size: success. The return value + * is the number of entries filled in the stats table. + * - A positive value higher than size: error, the given statistics table + * is too small. The return value corresponds to the size that should + * be given to succeed. The entries in the table are not valid and + * shall not be used by the caller. + * - A negative value on error (invalid port id). + */ +int +rte_eth_xstats_get_names_by_id(uint16_t port_id, + struct rte_eth_xstat_name *xstats_names, unsigned int size, + uint64_t *ids); + +/** + * Retrieve extended statistics of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param ids + * A pointer to an ids array passed by application. This tells which + * statistics values function should retrieve. This parameter + * can be set to NULL if size is 0. In this case function will retrieve + * all avalible statistics. + * @param values + * A pointer to a table to be filled with device statistics values. + * @param size + * The size of the ids array (number of elements). + * @return + * - A positive value lower or equal to size: success. The return value + * is the number of entries filled in the stats table. + * - A positive value higher than size: error, the given statistics table + * is too small. The return value corresponds to the size that should + * be given to succeed. The entries in the table are not valid and + * shall not be used by the caller. + * - A negative value on error (invalid port id). + */ +int rte_eth_xstats_get_by_id(uint16_t port_id, const uint64_t *ids, + uint64_t *values, unsigned int size); + +/** + * Gets the ID of a statistic from its name. + * + * This function searches for the statistics using string compares, and + * as such should not be used on the fast-path. For fast-path retrieval of + * specific statistics, store the ID as provided in *id* from this function, + * and pass the ID to rte_eth_xstats_get() + * + * @param port_id The port to look up statistics from + * @param xstat_name The name of the statistic to return + * @param[out] id A pointer to an app-supplied uint64_t which should be + * set to the ID of the stat if the stat exists. + * @return + * 0 on success + * -ENODEV for invalid port_id, + * -EIO if device is removed, + * -EINVAL if the xstat_name doesn't exist in port_id + */ +int rte_eth_xstats_get_id_by_name(uint16_t port_id, const char *xstat_name, + uint64_t *id); /** * Reset extended statistics of an Ethernet device. @@ -2006,7 +2077,7 @@ extern int rte_eth_xstats_get(uint8_t port_id, * @param port_id * The port identifier of the Ethernet device. */ -extern void rte_eth_xstats_reset(uint8_t port_id); +void rte_eth_xstats_reset(uint16_t port_id); /** * Set a mapping for the specified transmit queue to the specified per-queue @@ -2025,9 +2096,8 @@ extern void rte_eth_xstats_reset(uint8_t port_id); * @return * Zero if successful. Non-zero otherwise. */ -extern int rte_eth_dev_set_tx_queue_stats_mapping(uint8_t port_id, - uint16_t tx_queue_id, - uint8_t stat_idx); +int rte_eth_dev_set_tx_queue_stats_mapping(uint16_t port_id, + uint16_t tx_queue_id, uint8_t stat_idx); /** * Set a mapping for the specified receive queue to the specified per-queue @@ -2046,9 +2116,9 @@ extern int rte_eth_dev_set_tx_queue_stats_mapping(uint8_t port_id, * @return * Zero if successful. Non-zero otherwise. */ -extern int rte_eth_dev_set_rx_queue_stats_mapping(uint8_t port_id, - uint16_t rx_queue_id, - uint8_t stat_idx); +int rte_eth_dev_set_rx_queue_stats_mapping(uint16_t port_id, + uint16_t rx_queue_id, + uint8_t stat_idx); /** * Retrieve the Ethernet address of an Ethernet device. @@ -2059,7 +2129,7 @@ extern int rte_eth_dev_set_rx_queue_stats_mapping(uint8_t port_id, * A pointer to a structure of type *ether_addr* to be filled with * the Ethernet address of the Ethernet device. */ -extern void rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr); +void rte_eth_macaddr_get(uint16_t port_id, struct ether_addr *mac_addr); /** * Retrieve the contextual information of an Ethernet device. @@ -2070,8 +2140,70 @@ extern void rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr); * A pointer to a structure of type *rte_eth_dev_info* to be filled with * the contextual information of the Ethernet device. */ -extern void rte_eth_dev_info_get(uint8_t port_id, - struct rte_eth_dev_info *dev_info); +void rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info); + +/** + * Retrieve the firmware version of a device. + * + * @param port_id + * The port identifier of the device. + * @param fw_version + * A pointer to a string array storing the firmware version of a device, + * the string includes terminating null. This pointer is allocated by caller. + * @param fw_size + * The size of the string array pointed by fw_version, which should be + * large enough to store firmware version of the device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if operation is not supported. + * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. + * - (>0) if *fw_size* is not enough to store firmware version, return + * the size of the non truncated string. + */ +int rte_eth_dev_fw_version_get(uint16_t port_id, + char *fw_version, size_t fw_size); + +/** + * Retrieve the supported packet types of an Ethernet device. + * + * When a packet type is announced as supported, it *must* be recognized by + * the PMD. For instance, if RTE_PTYPE_L2_ETHER, RTE_PTYPE_L2_ETHER_VLAN + * and RTE_PTYPE_L3_IPV4 are announced, the PMD must return the following + * packet types for these packets: + * - Ether/IPv4 -> RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4 + * - Ether/Vlan/IPv4 -> RTE_PTYPE_L2_ETHER_VLAN | RTE_PTYPE_L3_IPV4 + * - Ether/[anything else] -> RTE_PTYPE_L2_ETHER + * - Ether/Vlan/[anything else] -> RTE_PTYPE_L2_ETHER_VLAN + * + * When a packet is received by a PMD, the most precise type must be + * returned among the ones supported. However a PMD is allowed to set + * packet type that is not in the supported list, at the condition that it + * is more precise. Therefore, a PMD announcing no supported packet types + * can still set a matching packet type in a received packet. + * + * @note + * Better to invoke this API after the device is already started or rx burst + * function is decided, to obtain correct supported ptypes. + * @note + * if a given PMD does not report what ptypes it supports, then the supported + * ptype count is reported as 0. + * @param port_id + * The port identifier of the Ethernet device. + * @param ptype_mask + * A hint of what kind of packet type which the caller is interested in. + * @param ptypes + * An array pointer to store adequate packet types, allocated by caller. + * @param num + * Size of the array pointed by param ptypes. + * @return + * - (>=0) Number of supported ptypes. If the number of types exceeds num, + * only num entries will be filled into the ptypes array, but the full + * count of supported ptypes will be returned. + * - (-ENODEV) if *port_id* invalid. + */ +int rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask, + uint32_t *ptypes, int num); /** * Retrieve the MTU of an Ethernet device. @@ -2084,7 +2216,7 @@ extern void rte_eth_dev_info_get(uint8_t port_id, * - (0) if successful. * - (-ENODEV) if *port_id* invalid. */ -extern int rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu); +int rte_eth_dev_get_mtu(uint16_t port_id, uint16_t *mtu); /** * Change the MTU of an Ethernet device. @@ -2097,9 +2229,11 @@ extern int rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu); * - (0) if successful. * - (-ENOTSUP) if operation is not supported. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. * - (-EINVAL) if *mtu* invalid. + * - (-EBUSY) if operation is not allowed when the port is running */ -extern int rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu); +int rte_eth_dev_set_mtu(uint16_t port_id, uint16_t mtu); /** * Enable/Disable hardware filtering by an Ethernet device of received @@ -2116,10 +2250,11 @@ extern int rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu); * - (0) if successful. * - (-ENOSUP) if hardware-assisted VLAN filtering not configured. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. * - (-ENOSYS) if VLAN filtering on *port_id* disabled. * - (-EINVAL) if *vlan_id* > 4095. */ -extern int rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id , int on); +int rte_eth_dev_vlan_filter(uint16_t port_id, uint16_t vlan_id, int on); /** * Enable/Disable hardware VLAN Strip by a rx queue of an Ethernet device. @@ -2140,8 +2275,8 @@ extern int rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id , int on); * - (-ENODEV) if *port_id* invalid. * - (-EINVAL) if *rx_queue_id* invalid. */ -extern int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, - uint16_t rx_queue_id, int on); +int rte_eth_dev_set_vlan_strip_on_queue(uint16_t port_id, uint16_t rx_queue_id, + int on); /** * Set the Outer VLAN Ether Type by an Ethernet device, it can be inserted to @@ -2150,14 +2285,19 @@ extern int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, * * @param port_id * The port identifier of the Ethernet device. + * @param vlan_type + * The vlan type. * @param tag_type * The Tag Protocol ID * @return * - (0) if successful. * - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. */ -extern int rte_eth_dev_set_vlan_ether_type(uint8_t port_id, uint16_t tag_type); +int rte_eth_dev_set_vlan_ether_type(uint16_t port_id, + enum rte_vlan_type vlan_type, + uint16_t tag_type); /** * Set VLAN offload configuration on an Ethernet device @@ -2178,8 +2318,9 @@ extern int rte_eth_dev_set_vlan_ether_type(uint8_t port_id, uint16_t tag_type); * - (0) if successful. * - (-ENOSUP) if hardware-assisted VLAN filtering not configured. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. */ -extern int rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask); +int rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask); /** * Read VLAN Offload configuration from an Ethernet device @@ -2193,15 +2334,15 @@ extern int rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask); * ETH_VLAN_EXTEND_OFFLOAD * - (-ENODEV) if *port_id* invalid. */ -extern int rte_eth_dev_get_vlan_offload(uint8_t port_id); +int rte_eth_dev_get_vlan_offload(uint16_t port_id); /** - * Set port based TX VLAN insersion on or off. + * Set port based TX VLAN insertion on or off. * * @param port_id * The port identifier of the Ethernet device. * @param pvid - * Port based TX VLAN identifier togeth with user priority. + * Port based TX VLAN identifier together with user priority. * @param on * Turn on or off the port based TX VLAN insertion. * @@ -2209,548 +2350,348 @@ extern int rte_eth_dev_get_vlan_offload(uint8_t port_id); * - (0) if successful. * - negative if failed. */ -extern int rte_eth_dev_set_vlan_pvid(uint8_t port_id, uint16_t pvid, int on); +int rte_eth_dev_set_vlan_pvid(uint16_t port_id, uint16_t pvid, int on); + +typedef void (*buffer_tx_error_fn)(struct rte_mbuf **unsent, uint16_t count, + void *userdata); /** + * Structure used to buffer packets for future TX + * Used by APIs rte_eth_tx_buffer and rte_eth_tx_buffer_flush + */ +struct rte_eth_dev_tx_buffer { + buffer_tx_error_fn error_callback; + void *error_userdata; + uint16_t size; /**< Size of buffer for buffered tx */ + uint16_t length; /**< Number of packets in the array */ + struct rte_mbuf *pkts[]; + /**< Pending packets to be sent on explicit flush or when full */ +}; + +/** + * Calculate the size of the tx buffer. * - * Retrieve a burst of input packets from a receive queue of an Ethernet - * device. The retrieved packets are stored in *rte_mbuf* structures whose - * pointers are supplied in the *rx_pkts* array. - * - * The rte_eth_rx_burst() function loops, parsing the RX ring of the - * receive queue, up to *nb_pkts* packets, and for each completed RX - * descriptor in the ring, it performs the following operations: - * - * - Initialize the *rte_mbuf* data structure associated with the - * RX descriptor according to the information provided by the NIC into - * that RX descriptor. - * - * - Store the *rte_mbuf* data structure into the next entry of the - * *rx_pkts* array. + * @param sz + * Number of stored packets. + */ +#define RTE_ETH_TX_BUFFER_SIZE(sz) \ + (sizeof(struct rte_eth_dev_tx_buffer) + (sz) * sizeof(struct rte_mbuf *)) + +/** + * Initialize default values for buffered transmitting * - * - Replenish the RX descriptor with a new *rte_mbuf* buffer - * allocated from the memory pool associated with the receive queue at - * initialization time. + * @param buffer + * Tx buffer to be initialized. + * @param size + * Buffer size + * @return + * 0 if no error + */ +int +rte_eth_tx_buffer_init(struct rte_eth_dev_tx_buffer *buffer, uint16_t size); + +/** + * Configure a callback for buffered packets which cannot be sent + * + * Register a specific callback to be called when an attempt is made to send + * all packets buffered on an ethernet port, but not all packets can + * successfully be sent. The callback registered here will be called only + * from calls to rte_eth_tx_buffer() and rte_eth_tx_buffer_flush() APIs. + * The default callback configured for each queue by default just frees the + * packets back to the calling mempool. If additional behaviour is required, + * for example, to count dropped packets, or to retry transmission of packets + * which cannot be sent, this function should be used to register a suitable + * callback function to implement the desired behaviour. + * The example callback "rte_eth_count_unsent_packet_callback()" is also + * provided as reference. + * + * @param buffer + * The port identifier of the Ethernet device. + * @param callback + * The function to be used as the callback. + * @param userdata + * Arbitrary parameter to be passed to the callback function + * @return + * 0 on success, or -1 on error with rte_errno set appropriately + */ +int +rte_eth_tx_buffer_set_err_callback(struct rte_eth_dev_tx_buffer *buffer, + buffer_tx_error_fn callback, void *userdata); + +/** + * Callback function for silently dropping unsent buffered packets. * - * When retrieving an input packet that was scattered by the controller - * into multiple receive descriptors, the rte_eth_rx_burst() function - * appends the associated *rte_mbuf* buffers to the first buffer of the - * packet. + * This function can be passed to rte_eth_tx_buffer_set_err_callback() to + * adjust the default behavior when buffered packets cannot be sent. This + * function drops any unsent packets silently and is used by tx buffered + * operations as default behavior. * - * The rte_eth_rx_burst() function returns the number of packets - * actually retrieved, which is the number of *rte_mbuf* data structures - * effectively supplied into the *rx_pkts* array. - * A return value equal to *nb_pkts* indicates that the RX queue contained - * at least *rx_pkts* packets, and this is likely to signify that other - * received packets remain in the input queue. Applications implementing - * a "retrieve as much received packets as possible" policy can check this - * specific case and keep invoking the rte_eth_rx_burst() function until - * a value less than *nb_pkts* is returned. + * NOTE: this function should not be called directly, instead it should be used + * as a callback for packet buffering. * - * This receive method has the following advantages: + * NOTE: when configuring this function as a callback with + * rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter + * should point to an uint64_t value. * - * - It allows a run-to-completion network stack engine to retrieve and - * to immediately process received packets in a fast burst-oriented - * approach, avoiding the overhead of unnecessary intermediate packet - * queue/dequeue operations. + * @param pkts + * The previously buffered packets which could not be sent + * @param unsent + * The number of unsent packets in the pkts array + * @param userdata + * Not used + */ +void +rte_eth_tx_buffer_drop_callback(struct rte_mbuf **pkts, uint16_t unsent, + void *userdata); + +/** + * Callback function for tracking unsent buffered packets. * - * - Conversely, it also allows an asynchronous-oriented processing - * method to retrieve bursts of received packets and to immediately - * queue them for further parallel processing by another logical core, - * for instance. However, instead of having received packets being - * individually queued by the driver, this approach allows the invoker - * of the rte_eth_rx_burst() function to queue a burst of retrieved - * packets at a time and therefore dramatically reduce the cost of - * enqueue/dequeue operations per packet. + * This function can be passed to rte_eth_tx_buffer_set_err_callback() to + * adjust the default behavior when buffered packets cannot be sent. This + * function drops any unsent packets, but also updates a user-supplied counter + * to track the overall number of packets dropped. The counter should be an + * uint64_t variable. * - * - It allows the rte_eth_rx_burst() function of the driver to take - * advantage of burst-oriented hardware features (CPU cache, - * prefetch instructions, and so on) to minimize the number of CPU - * cycles per packet. + * NOTE: this function should not be called directly, instead it should be used + * as a callback for packet buffering. * - * To summarize, the proposed receive API enables many - * burst-oriented optimizations in both synchronous and asynchronous - * packet processing environments with no overhead in both cases. + * NOTE: when configuring this function as a callback with + * rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter + * should point to an uint64_t value. * - * The rte_eth_rx_burst() function does not provide any error - * notification to avoid the corresponding overhead. As a hint, the - * upper-level application might check the status of the device link once - * being systematically returned a 0 value for a given number of tries. + * @param pkts + * The previously buffered packets which could not be sent + * @param unsent + * The number of unsent packets in the pkts array + * @param userdata + * Pointer to an uint64_t value, which will be incremented by unsent + */ +void +rte_eth_tx_buffer_count_callback(struct rte_mbuf **pkts, uint16_t unsent, + void *userdata); + +/** + * Request the driver to free mbufs currently cached by the driver. The + * driver will only free the mbuf if it is no longer in use. It is the + * application's responsibity to ensure rte_eth_tx_buffer_flush(..) is + * called if needed. * * @param port_id * The port identifier of the Ethernet device. * @param queue_id - * The index of the receive queue from which to retrieve input packets. - * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * The index of the transmit queue through which output packets must be + * sent. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied * to rte_eth_dev_configure(). - * @param rx_pkts - * The address of an array of pointers to *rte_mbuf* structures that - * must be large enough to store *nb_pkts* pointers in it. - * @param nb_pkts - * The maximum number of packets to retrieve. + * @param free_cnt + * Maximum number of packets to free. Use 0 to indicate all possible packets + * should be freed. Note that a packet may be using multiple mbufs. * @return - * The number of packets actually retrieved, which is the number - * of pointers to *rte_mbuf* structures effectively supplied to the - * *rx_pkts* array. + * Failure: < 0 + * -ENODEV: Invalid interface + * -EIO: device is removed + * -ENOTSUP: Driver does not support function + * Success: >= 0 + * 0-n: Number of packets freed. More packets may still remain in ring that + * are in use. */ -#ifdef RTE_LIBRTE_ETHDEV_DEBUG -extern uint16_t rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id, - struct rte_mbuf **rx_pkts, uint16_t nb_pkts); -#else -static inline uint16_t -rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id, - struct rte_mbuf **rx_pkts, uint16_t nb_pkts) -{ - struct rte_eth_dev *dev; - - dev = &rte_eth_devices[port_id]; +int +rte_eth_tx_done_cleanup(uint16_t port_id, uint16_t queue_id, uint32_t free_cnt); - nb_pkts = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id], rx_pkts, - nb_pkts); +/** + * Subtypes for IPsec offload event(@ref RTE_ETH_EVENT_IPSEC) raised by + * eth device. + */ +enum rte_eth_event_ipsec_subtype { + RTE_ETH_EVENT_IPSEC_UNKNOWN = 0, + /**< Unknown event type */ + RTE_ETH_EVENT_IPSEC_ESN_OVERFLOW, + /**< Sequence number overflow */ + RTE_ETH_EVENT_IPSEC_SA_TIME_EXPIRY, + /**< Soft time expiry of SA */ + RTE_ETH_EVENT_IPSEC_SA_BYTE_EXPIRY, + /**< Soft byte expiry of SA */ + RTE_ETH_EVENT_IPSEC_MAX + /**< Max value of this enum */ +}; -#ifdef RTE_ETHDEV_RXTX_CALLBACKS - struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id]; +/** + * Descriptor for @ref RTE_ETH_EVENT_IPSEC event. Used by eth dev to send extra + * information of the IPsec offload event. + */ +struct rte_eth_event_ipsec_desc { + enum rte_eth_event_ipsec_subtype subtype; + /**< Type of RTE_ETH_EVENT_IPSEC_* event */ + uint64_t metadata; + /**< Event specific metadata + * + * For the following events, *userdata* registered + * with the *rte_security_session* would be returned + * as metadata, + * + * - @ref RTE_ETH_EVENT_IPSEC_ESN_OVERFLOW + * - @ref RTE_ETH_EVENT_IPSEC_SA_TIME_EXPIRY + * - @ref RTE_ETH_EVENT_IPSEC_SA_BYTE_EXPIRY + * + * @see struct rte_security_session_conf + * + */ +}; - if (unlikely(cb != NULL)) { - do { - nb_pkts = cb->fn(port_id, queue_id, rx_pkts, nb_pkts, - cb->param); - cb = cb->next; - } while (cb != NULL); - } -#endif +/** + * The eth device event type for interrupt, and maybe others in the future. + */ +enum rte_eth_event_type { + RTE_ETH_EVENT_UNKNOWN, /**< unknown event type */ + RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */ + RTE_ETH_EVENT_QUEUE_STATE, + /**< queue state event (enabled/disabled) */ + RTE_ETH_EVENT_INTR_RESET, + /**< reset interrupt event, sent to VF on PF reset */ + RTE_ETH_EVENT_VF_MBOX, /**< message from the VF received by PF */ + RTE_ETH_EVENT_MACSEC, /**< MACsec offload related event */ + RTE_ETH_EVENT_INTR_RMV, /**< device removal event */ + RTE_ETH_EVENT_NEW, /**< port is probed */ + RTE_ETH_EVENT_DESTROY, /**< port is released */ + RTE_ETH_EVENT_IPSEC, /**< IPsec offload related event */ + RTE_ETH_EVENT_MAX /**< max value of this enum */ +}; - return nb_pkts; -} -#endif +typedef int (*rte_eth_dev_cb_fn)(uint16_t port_id, + enum rte_eth_event_type event, void *cb_arg, void *ret_param); +/**< user application callback to be registered for interrupts */ /** - * Get the number of used descriptors in a specific queue + * Register a callback function for port event. * * @param port_id - * The port identifier of the Ethernet device. - * @param queue_id - * The queue id on the specific port. + * Port id. + * RTE_ETH_ALL means register the event for all port ids. + * @param event + * Event interested. + * @param cb_fn + * User supplied callback function to be called. + * @param cb_arg + * Pointer to the parameters for the registered callback. + * * @return - * The number of used descriptors in the specific queue. + * - On success, zero. + * - On failure, a negative value. */ -#ifdef RTE_LIBRTE_ETHDEV_DEBUG -extern uint32_t rte_eth_rx_queue_count(uint8_t port_id, uint16_t queue_id); -#else -static inline uint32_t -rte_eth_rx_queue_count(uint8_t port_id, uint16_t queue_id) -{ - struct rte_eth_dev *dev; - - dev = &rte_eth_devices[port_id]; - return (*dev->dev_ops->rx_queue_count)(dev, queue_id); -} -#endif +int rte_eth_dev_callback_register(uint16_t port_id, + enum rte_eth_event_type event, + rte_eth_dev_cb_fn cb_fn, void *cb_arg); /** - * Check if the DD bit of the specific RX descriptor in the queue has been set + * Unregister a callback function for port event. * * @param port_id - * The port identifier of the Ethernet device. - * @param queue_id - * The queue id on the specific port. - * @offset - * The offset of the descriptor ID from tail. + * Port id. + * RTE_ETH_ALL means unregister the event for all port ids. + * @param event + * Event interested. + * @param cb_fn + * User supplied callback function to be called. + * @param cb_arg + * Pointer to the parameters for the registered callback. -1 means to + * remove all for the same callback address and same event. + * * @return - * - (1) if the specific DD bit is set. - * - (0) if the specific DD bit is not set. - * - (-ENODEV) if *port_id* invalid. + * - On success, zero. + * - On failure, a negative value. */ -#ifdef RTE_LIBRTE_ETHDEV_DEBUG -extern int rte_eth_rx_descriptor_done(uint8_t port_id, - uint16_t queue_id, - uint16_t offset); -#else -static inline int -rte_eth_rx_descriptor_done(uint8_t port_id, uint16_t queue_id, uint16_t offset) -{ - struct rte_eth_dev *dev; - - dev = &rte_eth_devices[port_id]; - return (*dev->dev_ops->rx_descriptor_done)( \ - dev->data->rx_queues[queue_id], offset); -} -#endif +int rte_eth_dev_callback_unregister(uint16_t port_id, + enum rte_eth_event_type event, + rte_eth_dev_cb_fn cb_fn, void *cb_arg); /** - * Send a burst of output packets on a transmit queue of an Ethernet device. - * - * The rte_eth_tx_burst() function is invoked to transmit output packets - * on the output queue *queue_id* of the Ethernet device designated by its - * *port_id*. - * The *nb_pkts* parameter is the number of packets to send which are - * supplied in the *tx_pkts* array of *rte_mbuf* structures. - * The rte_eth_tx_burst() function loops, sending *nb_pkts* packets, - * up to the number of transmit descriptors available in the TX ring of the - * transmit queue. - * For each packet to send, the rte_eth_tx_burst() function performs - * the following operations: - * - * - Pick up the next available descriptor in the transmit ring. - * - * - Free the network buffer previously sent with that descriptor, if any. - * - * - Initialize the transmit descriptor with the information provided - * in the *rte_mbuf data structure. - * - * In the case of a segmented packet composed of a list of *rte_mbuf* buffers, - * the rte_eth_tx_burst() function uses several transmit descriptors - * of the ring. - * - * The rte_eth_tx_burst() function returns the number of packets it - * actually sent. A return value equal to *nb_pkts* means that all packets - * have been sent, and this is likely to signify that other output packets - * could be immediately transmitted again. Applications that implement a - * "send as many packets to transmit as possible" policy can check this - * specific case and keep invoking the rte_eth_tx_burst() function until - * a value less than *nb_pkts* is returned. + * When there is no rx packet coming in Rx Queue for a long time, we can + * sleep lcore related to RX Queue for power saving, and enable rx interrupt + * to be triggered when Rx packet arrives. * - * It is the responsibility of the rte_eth_tx_burst() function to - * transparently free the memory buffers of packets previously sent. - * This feature is driven by the *tx_free_thresh* value supplied to the - * rte_eth_dev_configure() function at device configuration time. - * When the number of previously sent packets reached the "minimum transmit - * packets to free" threshold, the rte_eth_tx_burst() function must - * [attempt to] free the *rte_mbuf* buffers of those packets whose - * transmission was effectively completed. + * The rte_eth_dev_rx_intr_enable() function enables rx queue + * interrupt on specific rx queue of a port. * * @param port_id * The port identifier of the Ethernet device. * @param queue_id - * The index of the transmit queue through which output packets must be - * sent. - * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * The index of the receive queue from which to retrieve input packets. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied * to rte_eth_dev_configure(). - * @param tx_pkts - * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures - * which contain the output packets. - * @param nb_pkts - * The maximum number of packets to transmit. - * @return - * The number of output packets actually stored in transmit descriptors of - * the transmit ring. The return value can be less than the value of the - * *tx_pkts* parameter when the transmit ring is full or has been filled up. - */ -#ifdef RTE_LIBRTE_ETHDEV_DEBUG -extern uint16_t rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id, - struct rte_mbuf **tx_pkts, uint16_t nb_pkts); -#else -static inline uint16_t -rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id, - struct rte_mbuf **tx_pkts, uint16_t nb_pkts) -{ - struct rte_eth_dev *dev; - - dev = &rte_eth_devices[port_id]; - -#ifdef RTE_ETHDEV_RXTX_CALLBACKS - struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id]; - - if (unlikely(cb != NULL)) { - do { - nb_pkts = cb->fn(port_id, queue_id, tx_pkts, nb_pkts, - cb->param); - cb = cb->next; - } while (cb != NULL); - } -#endif - - return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts); -} -#endif - -/** - * Setup a new signature filter rule on an Ethernet device - * - * @param port_id - * The port identifier of the Ethernet device. - * @param fdir_filter - * The pointer to the fdir filter structure describing the signature filter - * rule. - * The *rte_fdir_filter* structure includes the values of the different fields - * to match: source and destination IP addresses, vlan id, flexbytes, source - * and destination ports, and so on. - * @param rx_queue - * The index of the RX queue where to store RX packets matching the added - * signature filter defined in fdir_filter. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support flow director mode. - * - (-ENODEV) if *port_id* invalid. - * - (-ENOSYS) if the FDIR mode is not configured in signature mode - * on *port_id*. - * - (-EINVAL) if the fdir_filter information is not correct. - */ -int rte_eth_dev_fdir_add_signature_filter(uint8_t port_id, - struct rte_fdir_filter *fdir_filter, - uint8_t rx_queue); - -/** - * Update a signature filter rule on an Ethernet device. - * If the rule doesn't exits, it is created. - * - * @param port_id - * The port identifier of the Ethernet device. - * @param fdir_ftr - * The pointer to the structure describing the signature filter rule. - * The *rte_fdir_filter* structure includes the values of the different fields - * to match: source and destination IP addresses, vlan id, flexbytes, source - * and destination ports, and so on. - * @param rx_queue - * The index of the RX queue where to store RX packets matching the added - * signature filter defined in fdir_ftr. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support flow director mode. - * - (-ENODEV) if *port_id* invalid. - * - (-ENOSYS) if the flow director mode is not configured in signature mode - * on *port_id*. - * - (-EINVAL) if the fdir_filter information is not correct. - */ -int rte_eth_dev_fdir_update_signature_filter(uint8_t port_id, - struct rte_fdir_filter *fdir_ftr, - uint8_t rx_queue); - -/** - * Remove a signature filter rule on an Ethernet device. - * - * @param port_id - * The port identifier of the Ethernet device. - * @param fdir_ftr - * The pointer to the structure describing the signature filter rule. - * The *rte_fdir_filter* structure includes the values of the different fields - * to match: source and destination IP addresses, vlan id, flexbytes, source - * and destination ports, and so on. * @return * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support flow director mode. + * - (-ENOTSUP) if underlying hardware OR driver doesn't support + * that operation. * - (-ENODEV) if *port_id* invalid. - * - (-ENOSYS) if the flow director mode is not configured in signature mode - * on *port_id*. - * - (-EINVAL) if the fdir_filter information is not correct. + * - (-EIO) if device is removed. */ -int rte_eth_dev_fdir_remove_signature_filter(uint8_t port_id, - struct rte_fdir_filter *fdir_ftr); +int rte_eth_dev_rx_intr_enable(uint16_t port_id, uint16_t queue_id); /** - * Retrieve the flow director information of an Ethernet device. + * When lcore wakes up from rx interrupt indicating packet coming, disable rx + * interrupt and returns to polling mode. * - * @param port_id - * The port identifier of the Ethernet device. - * @param fdir - * A pointer to a structure of type *rte_eth_dev_fdir* to be filled with - * the flow director information of the Ethernet device. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support flow director mode. - * - (-ENODEV) if *port_id* invalid. - * - (-ENOSYS) if the flow director mode is not configured on *port_id*. - */ -int rte_eth_dev_fdir_get_infos(uint8_t port_id, struct rte_eth_fdir *fdir); - -/** - * Add a new perfect filter rule on an Ethernet device. + * The rte_eth_dev_rx_intr_disable() function disables rx queue + * interrupt on specific rx queue of a port. * * @param port_id * The port identifier of the Ethernet device. - * @param fdir_filter - * The pointer to the structure describing the perfect filter rule. - * The *rte_fdir_filter* structure includes the values of the different fields - * to match: source and destination IP addresses, vlan id, flexbytes, source - * and destination ports, and so on. - * IPv6 are not supported. - * @param soft_id - * The 16-bit value supplied in the field hash.fdir.id of mbuf for RX - * packets matching the perfect filter. - * @param rx_queue - * The index of the RX queue where to store RX packets matching the added - * perfect filter defined in fdir_filter. - * @param drop - * If drop is set to 1, matching RX packets are stored into the RX drop - * queue defined in the rte_fdir_conf. + * @param queue_id + * The index of the receive queue from which to retrieve input packets. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). * @return * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support flow director mode. + * - (-ENOTSUP) if underlying hardware OR driver doesn't support + * that operation. * - (-ENODEV) if *port_id* invalid. - * - (-ENOSYS) if the flow director mode is not configured in perfect mode - * on *port_id*. - * - (-EINVAL) if the fdir_filter information is not correct. + * - (-EIO) if device is removed. */ -int rte_eth_dev_fdir_add_perfect_filter(uint8_t port_id, - struct rte_fdir_filter *fdir_filter, - uint16_t soft_id, uint8_t rx_queue, - uint8_t drop); +int rte_eth_dev_rx_intr_disable(uint16_t port_id, uint16_t queue_id); /** - * Update a perfect filter rule on an Ethernet device. - * If the rule doesn't exits, it is created. + * RX Interrupt control per port. * * @param port_id * The port identifier of the Ethernet device. - * @param fdir_filter - * The pointer to the structure describing the perfect filter rule. - * The *rte_fdir_filter* structure includes the values of the different fields - * to match: source and destination IP addresses, vlan id, flexbytes, source - * and destination ports, and so on. - * IPv6 are not supported. - * @param soft_id - * The 16-bit value supplied in the field hash.fdir.id of mbuf for RX - * packets matching the perfect filter. - * @param rx_queue - * The index of the RX queue where to store RX packets matching the added - * perfect filter defined in fdir_filter. - * @param drop - * If drop is set to 1, matching RX packets are stored into the RX drop - * queue defined in the rte_fdir_conf. + * @param epfd + * Epoll instance fd which the intr vector associated to. + * Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance. + * @param op + * The operation be performed for the vector. + * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}. + * @param data + * User raw data. * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support flow director mode. - * - (-ENODEV) if *port_id* invalid. - * - (-ENOSYS) if the flow director mode is not configured in perfect mode - * on *port_id*. - * - (-EINVAL) if the fdir_filter information is not correct. + * - On success, zero. + * - On failure, a negative value. */ -int rte_eth_dev_fdir_update_perfect_filter(uint8_t port_id, - struct rte_fdir_filter *fdir_filter, - uint16_t soft_id, uint8_t rx_queue, - uint8_t drop); +int rte_eth_dev_rx_intr_ctl(uint16_t port_id, int epfd, int op, void *data); /** - * Remove a perfect filter rule on an Ethernet device. - * - * @param port_id - * The port identifier of the Ethernet device. - * @param fdir_filter - * The pointer to the structure describing the perfect filter rule. - * The *rte_fdir_filter* structure includes the values of the different fields - * to match: source and destination IP addresses, vlan id, flexbytes, source - * and destination ports, and so on. - * IPv6 are not supported. - * @param soft_id - * The soft_id value provided when adding/updating the removed filter. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support flow director mode. - * - (-ENODEV) if *port_id* invalid. - * - (-ENOSYS) if the flow director mode is not configured in perfect mode - * on *port_id*. - * - (-EINVAL) if the fdir_filter information is not correct. - */ -int rte_eth_dev_fdir_remove_perfect_filter(uint8_t port_id, - struct rte_fdir_filter *fdir_filter, - uint16_t soft_id); -/** - * Configure globally the masks for flow director mode for an Ethernet device. - * For example, the device can match packets with only the first 24 bits of - * the IPv4 source address. - * - * The following fields can be masked: IPv4 addresses and L4 port numbers. - * The following fields can be either enabled or disabled completely for the - * matching functionality: VLAN ID tag; VLAN Priority + CFI bit; Flexible 2-byte - * tuple. - * IPv6 masks are not supported. - * - * All filters must comply with the masks previously configured. - * For example, with a mask equal to 255.255.255.0 for the source IPv4 address, - * all IPv4 filters must be created with a source IPv4 address that fits the - * "X.X.X.0" format. - * - * This function flushes all filters that have been previously added in - * the device. + * RX Interrupt control per queue. * * @param port_id * The port identifier of the Ethernet device. - * @param fdir_mask - * The pointer to the fdir mask structure describing relevant headers fields - * and relevant bits to use when matching packets addresses and ports. - * IPv6 masks are not supported. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support flow director mode. - * - (-ENODEV) if *port_id* invalid. - * - (-ENOSYS) if the flow director mode is not configured in perfect - * mode on *port_id*. - * - (-EINVAL) if the fdir_filter information is not correct - */ -int rte_eth_dev_fdir_set_masks(uint8_t port_id, - struct rte_fdir_masks *fdir_mask); - -/** - * The eth device event type for interrupt, and maybe others in the future. - */ -enum rte_eth_event_type { - RTE_ETH_EVENT_UNKNOWN, /**< unknown event type */ - RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */ - RTE_ETH_EVENT_MAX /**< max value of this enum */ -}; - -typedef void (*rte_eth_dev_cb_fn)(uint8_t port_id, \ - enum rte_eth_event_type event, void *cb_arg); -/**< user application callback to be registered for interrupts */ - - - -/** - * Register a callback function for specific port id. - * - * @param port_id - * Port id. - * @param event - * Event interested. - * @param cb_fn - * User supplied callback function to be called. - * @param cb_arg - * Pointer to the parameters for the registered callback. - * - * @return - * - On success, zero. - * - On failure, a negative value. - */ -int rte_eth_dev_callback_register(uint8_t port_id, - enum rte_eth_event_type event, - rte_eth_dev_cb_fn cb_fn, void *cb_arg); - -/** - * Unregister a callback function for specific port id. - * - * @param port_id - * Port id. - * @param event - * Event interested. - * @param cb_fn - * User supplied callback function to be called. - * @param cb_arg - * Pointer to the parameters for the registered callback. -1 means to - * remove all for the same callback address and same event. - * - * @return - * - On success, zero. - * - On failure, a negative value. - */ -int rte_eth_dev_callback_unregister(uint8_t port_id, - enum rte_eth_event_type event, - rte_eth_dev_cb_fn cb_fn, void *cb_arg); - -/** - * @internal Executes all the user application registered callbacks for - * the specific device. It is for DPDK internal user only. User - * application should not call it directly. - * - * @param dev - * Pointer to struct rte_eth_dev. - * @param event - * Eth device interrupt event type. - * + * @param queue_id + * The index of the receive queue from which to retrieve input packets. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param epfd + * Epoll instance fd which the intr vector associated to. + * Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance. + * @param op + * The operation be performed for the vector. + * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}. + * @param data + * User raw data. * @return - * void + * - On success, zero. + * - On failure, a negative value. */ -void _rte_eth_dev_callback_process(struct rte_eth_dev *dev, - enum rte_eth_event_type event); +int rte_eth_dev_rx_intr_ctl_q(uint16_t port_id, uint16_t queue_id, + int epfd, int op, void *data); /** * Turn on the LED on the Ethernet device. @@ -2763,8 +2704,9 @@ void _rte_eth_dev_callback_process(struct rte_eth_dev *dev, * - (-ENOTSUP) if underlying hardware OR driver doesn't support * that operation. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. */ -int rte_eth_led_on(uint8_t port_id); +int rte_eth_led_on(uint16_t port_id); /** * Turn off the LED on the Ethernet device. @@ -2777,8 +2719,9 @@ int rte_eth_led_on(uint8_t port_id); * - (-ENOTSUP) if underlying hardware OR driver doesn't support * that operation. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. */ -int rte_eth_led_off(uint8_t port_id); +int rte_eth_led_off(uint16_t port_id); /** * Get current status of the Ethernet link flow control for Ethernet device @@ -2791,8 +2734,9 @@ int rte_eth_led_off(uint8_t port_id); * - (0) if successful. * - (-ENOTSUP) if hardware doesn't support flow control. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. */ -int rte_eth_dev_flow_ctrl_get(uint8_t port_id, +int rte_eth_dev_flow_ctrl_get(uint16_t port_id, struct rte_eth_fc_conf *fc_conf); /** @@ -2807,9 +2751,9 @@ int rte_eth_dev_flow_ctrl_get(uint8_t port_id, * - (-ENOTSUP) if hardware doesn't support flow control mode. * - (-ENODEV) if *port_id* invalid. * - (-EINVAL) if bad parameter - * - (-EIO) if flow control setup failure + * - (-EIO) if flow control setup failure or device is removed. */ -int rte_eth_dev_flow_ctrl_set(uint8_t port_id, +int rte_eth_dev_flow_ctrl_set(uint16_t port_id, struct rte_eth_fc_conf *fc_conf); /** @@ -2825,16 +2769,16 @@ int rte_eth_dev_flow_ctrl_set(uint8_t port_id, * - (-ENOTSUP) if hardware doesn't support priority flow control mode. * - (-ENODEV) if *port_id* invalid. * - (-EINVAL) if bad parameter - * - (-EIO) if flow control setup failure + * - (-EIO) if flow control setup failure or device is removed. */ -int rte_eth_dev_priority_flow_ctrl_set(uint8_t port_id, +int rte_eth_dev_priority_flow_ctrl_set(uint16_t port_id, struct rte_eth_pfc_conf *pfc_conf); /** * Add a MAC address to an internal array of addresses used to enable whitelist * filtering to accept packets only if the destination MAC address matches. * - * @param port + * @param port_id * The port identifier of the Ethernet device. * @param mac_addr * The MAC address to add. @@ -2842,19 +2786,20 @@ int rte_eth_dev_priority_flow_ctrl_set(uint8_t port_id, * VMDq pool index to associate address with (if VMDq is enabled). If VMDq is * not enabled, this should be set to 0. * @return - * - (0) if successfully added or *mac_addr" was already added. + * - (0) if successfully added or *mac_addr* was already added. * - (-ENOTSUP) if hardware doesn't support this feature. * - (-ENODEV) if *port* is invalid. + * - (-EIO) if device is removed. * - (-ENOSPC) if no more MAC addresses can be added. * - (-EINVAL) if MAC address is invalid. */ -int rte_eth_dev_mac_addr_add(uint8_t port, struct ether_addr *mac_addr, +int rte_eth_dev_mac_addr_add(uint16_t port_id, struct ether_addr *mac_addr, uint32_t pool); /** * Remove a MAC address from the internal array of addresses. * - * @param port + * @param port_id * The port identifier of the Ethernet device. * @param mac_addr * MAC address to remove. @@ -2864,12 +2809,28 @@ int rte_eth_dev_mac_addr_add(uint8_t port, struct ether_addr *mac_addr, * - (-ENODEV) if *port* invalid. * - (-EADDRINUSE) if attempting to remove the default MAC address */ -int rte_eth_dev_mac_addr_remove(uint8_t port, struct ether_addr *mac_addr); +int rte_eth_dev_mac_addr_remove(uint16_t port_id, struct ether_addr *mac_addr); + +/** + * Set the default MAC address. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param mac_addr + * New default MAC address. + * @return + * - (0) if successful, or *mac_addr* didn't exist. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if MAC address is invalid. + */ +int rte_eth_dev_default_mac_addr_set(uint16_t port_id, + struct ether_addr *mac_addr); /** * Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device. * - * @param port + * @param port_id * The port identifier of the Ethernet device. * @param reta_conf * RETA to update. @@ -2880,15 +2841,16 @@ int rte_eth_dev_mac_addr_remove(uint8_t port, struct ether_addr *mac_addr); * - (0) if successful. * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. + * - (-EIO) if device is removed. */ -int rte_eth_dev_rss_reta_update(uint8_t port, +int rte_eth_dev_rss_reta_update(uint16_t port_id, struct rte_eth_rss_reta_entry64 *reta_conf, uint16_t reta_size); /** * Query Redirection Table(RETA) of Receive Side Scaling of Ethernet device. * - * @param port + * @param port_id * The port identifier of the Ethernet device. * @param reta_conf * RETA to query. @@ -2899,8 +2861,9 @@ int rte_eth_dev_rss_reta_update(uint8_t port, * - (0) if successful. * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. + * - (-EIO) if device is removed. */ -int rte_eth_dev_rss_reta_query(uint8_t port, +int rte_eth_dev_rss_reta_query(uint16_t port_id, struct rte_eth_rss_reta_entry64 *reta_conf, uint16_t reta_size); @@ -2909,7 +2872,7 @@ int rte_eth_dev_rss_reta_query(uint8_t port, * MAC address, and the packet is routed to all VFs for which the RX mode is * accept packets that match the unicast hash table. * - * @param port + * @param port_id * The port identifier of the Ethernet device. * @param addr * Unicast MAC address. @@ -2920,17 +2883,18 @@ int rte_eth_dev_rss_reta_query(uint8_t port, * - (0) if successful. * - (-ENOTSUP) if hardware doesn't support. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. * - (-EINVAL) if bad parameter. */ -int rte_eth_dev_uc_hash_table_set(uint8_t port,struct ether_addr *addr, - uint8_t on); +int rte_eth_dev_uc_hash_table_set(uint16_t port_id, struct ether_addr *addr, + uint8_t on); /** * Updates all unicast hash bitmaps for receiving packet with any Unicast * Ethernet MAC addresses,the packet is routed to all VFs for which the RX * mode is accept packets that match the unicast hash table. * - * @param port + * @param port_id * The port identifier of the Ethernet device. * @param on * 1 - Set all unicast hash bitmaps for receiving all the Ethernet @@ -2940,120 +2904,35 @@ int rte_eth_dev_uc_hash_table_set(uint8_t port,struct ether_addr *addr, * - (0) if successful. * - (-ENOTSUP) if hardware doesn't support. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. * - (-EINVAL) if bad parameter. */ -int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on); +int rte_eth_dev_uc_all_hash_table_set(uint16_t port_id, uint8_t on); - /** - * Set RX L2 Filtering mode of a VF of an Ethernet device. - * - * @param port - * The port identifier of the Ethernet device. - * @param vf - * VF id. - * @param rx_mode - * The RX mode mask, which is one or more of accepting Untagged Packets, - * packets that match the PFUTA table, Broadcast and Multicast Promiscuous. - * ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC, - * ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used - * in rx_mode. +/** + * Set a traffic mirroring rule on an Ethernet device + * + * @param port_id + * The port identifier of the Ethernet device. + * @param mirror_conf + * The pointer to the traffic mirroring structure describing the mirroring rule. + * The *rte_eth_vm_mirror_conf* structure includes the type of mirroring rule, + * destination pool and the value of rule if enable vlan or pool mirroring. + * + * @param rule_id + * The index of traffic mirroring rule, we support four separated rules. * @param on - * 1 - Enable a VF RX mode. - * 0 - Disable a VF RX mode. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mode, - uint8_t on); - -/** -* Enable or disable a VF traffic transmit of the Ethernet device. -* -* @param port -* The port identifier of the Ethernet device. -* @param vf -* VF id. -* @param on -* 1 - Enable a VF traffic transmit. -* 0 - Disable a VF traffic transmit. -* @return -* - (0) if successful. -* - (-ENODEV) if *port_id* invalid. -* - (-ENOTSUP) if hardware doesn't support. -* - (-EINVAL) if bad parameter. -*/ -int -rte_eth_dev_set_vf_tx(uint8_t port,uint16_t vf, uint8_t on); - -/** -* Enable or disable a VF traffic receive of an Ethernet device. -* -* @param port -* The port identifier of the Ethernet device. -* @param vf -* VF id. -* @param on -* 1 - Enable a VF traffic receive. -* 0 - Disable a VF traffic receive. -* @return -* - (0) if successful. -* - (-ENOTSUP) if hardware doesn't support. -* - (-ENODEV) if *port_id* invalid. -* - (-EINVAL) if bad parameter. -*/ -int -rte_eth_dev_set_vf_rx(uint8_t port,uint16_t vf, uint8_t on); - -/** -* Enable/Disable hardware VF VLAN filtering by an Ethernet device of -* received VLAN packets tagged with a given VLAN Tag Identifier. -* -* @param port id -* The port identifier of the Ethernet device. -* @param vlan_id -* The VLAN Tag Identifier whose filtering must be enabled or disabled. -* @param vf_mask -* Bitmap listing which VFs participate in the VLAN filtering. -* @param vlan_on -* 1 - Enable VFs VLAN filtering. -* 0 - Disable VFs VLAN filtering. -* @return -* - (0) if successful. -* - (-ENOTSUP) if hardware doesn't support. -* - (-ENODEV) if *port_id* invalid. -* - (-EINVAL) if bad parameter. -*/ -int -rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id, - uint64_t vf_mask, - uint8_t vlan_on); - -/** - * Set a traffic mirroring rule on an Ethernet device - * - * @param port_id - * The port identifier of the Ethernet device. - * @param mirror_conf - * The pointer to the traffic mirroring structure describing the mirroring rule. - * The *rte_eth_vm_mirror_conf* structure includes the type of mirroring rule, - * destination pool and the value of rule if enable vlan or pool mirroring. - * - * @param rule_id - * The index of traffic mirroring rule, we support four separated rules. - * @param on - * 1 - Enable a mirroring rule. - * 0 - Disable a mirroring rule. + * 1 - Enable a mirroring rule. + * 0 - Disable a mirroring rule. * @return * - (0) if successful. * - (-ENOTSUP) if hardware doesn't support this feature. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. * - (-EINVAL) if the mr_conf information is not correct. */ -int rte_eth_mirror_rule_set(uint8_t port_id, - struct rte_eth_vmdq_mirror_conf *mirror_conf, +int rte_eth_mirror_rule_set(uint16_t port_id, + struct rte_eth_mirror_conf *mirror_conf, uint8_t rule_id, uint8_t on); @@ -3068,9 +2947,10 @@ int rte_eth_mirror_rule_set(uint8_t port_id, * - (0) if successful. * - (-ENOTSUP) if hardware doesn't support this feature. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. * - (-EINVAL) if bad parameter. */ -int rte_eth_mirror_rule_reset(uint8_t port_id, +int rte_eth_mirror_rule_reset(uint16_t port_id, uint8_t rule_id); /** @@ -3081,201 +2961,17 @@ int rte_eth_mirror_rule_reset(uint8_t port_id, * @param queue_idx * The queue id. * @param tx_rate - * The tx rate allocated from the total link speed for this queue. + * The tx rate in Mbps. Allocated from the total port link speed. * @return * - (0) if successful. * - (-ENOTSUP) if hardware doesn't support this feature. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. * - (-EINVAL) if bad parameter. */ -int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx, +int rte_eth_set_queue_rate_limit(uint16_t port_id, uint16_t queue_idx, uint16_t tx_rate); -/** - * Set the rate limitation for a vf on an Ethernet device. - * - * @param port_id - * The port identifier of the Ethernet device. - * @param vf - * VF id. - * @param tx_rate - * The tx rate allocated from the total link speed for this VF id. - * @param q_msk - * The queue mask which need to set the rate. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support this feature. - * - (-ENODEV) if *port_id* invalid. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf, - uint16_t tx_rate, uint64_t q_msk); - -/** - * Initialize bypass logic. This function needs to be called before - * executing any other bypass API. - * - * @param port - * The port identifier of the Ethernet device. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_init(uint8_t port); - -/** - * Return bypass state. - * - * @param port - * The port identifier of the Ethernet device. - * @param state - * The return bypass state. - * - (1) Normal mode - * - (2) Bypass mode - * - (3) Isolate mode - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_state_show(uint8_t port, uint32_t *state); - -/** - * Set bypass state - * - * @param port - * The port identifier of the Ethernet device. - * @param state - * The current bypass state. - * - (1) Normal mode - * - (2) Bypass mode - * - (3) Isolate mode - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_state_set(uint8_t port, uint32_t *new_state); - -/** - * Return bypass state when given event occurs. - * - * @param port - * The port identifier of the Ethernet device. - * @param event - * The bypass event - * - (1) Main power on (power button is pushed) - * - (2) Auxiliary power on (power supply is being plugged) - * - (3) Main power off (system shutdown and power supply is left plugged in) - * - (4) Auxiliary power off (power supply is being unplugged) - * - (5) Display or set the watchdog timer - * @param state - * The bypass state when given event occurred. - * - (1) Normal mode - * - (2) Bypass mode - * - (3) Isolate mode - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_event_show(uint8_t port, uint32_t event, uint32_t *state); - -/** - * Set bypass state when given event occurs. - * - * @param port - * The port identifier of the Ethernet device. - * @param event - * The bypass event - * - (1) Main power on (power button is pushed) - * - (2) Auxiliary power on (power supply is being plugged) - * - (3) Main power off (system shutdown and power supply is left plugged in) - * - (4) Auxiliary power off (power supply is being unplugged) - * - (5) Display or set the watchdog timer - * @param state - * The assigned state when given event occurs. - * - (1) Normal mode - * - (2) Bypass mode - * - (3) Isolate mode - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_event_store(uint8_t port, uint32_t event, uint32_t state); - -/** - * Set bypass watchdog timeout count. - * - * @param port - * The port identifier of the Ethernet device. - * @param state - * The timeout to be set. - * - (0) 0 seconds (timer is off) - * - (1) 1.5 seconds - * - (2) 2 seconds - * - (3) 3 seconds - * - (4) 4 seconds - * - (5) 8 seconds - * - (6) 16 seconds - * - (7) 32 seconds - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_wd_timeout_store(uint8_t port, uint32_t timeout); - -/** - * Get bypass firmware version. - * - * @param port - * The port identifier of the Ethernet device. - * @param ver - * The firmware version - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_ver_show(uint8_t port, uint32_t *ver); - -/** - * Return bypass watchdog timeout in seconds - * - * @param port - * The port identifier of the Ethernet device. - * @param wd_timeout - * The return watchdog timeout. "0" represents timer expired - * - (0) 0 seconds (timer is off) - * - (1) 1.5 seconds - * - (2) 2 seconds - * - (3) 3 seconds - * - (4) 4 seconds - * - (5) 8 seconds - * - (6) 16 seconds - * - (7) 32 seconds - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout); - -/** - * Reset bypass watchdog timer - * - * @param port - * The port identifier of the Ethernet device. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_wd_reset(uint8_t port); - /** * Configuration of Receive Side Scaling hash computation of Ethernet device. * @@ -3286,10 +2982,11 @@ int rte_eth_dev_bypass_wd_reset(uint8_t port); * @return * - (0) if successful. * - (-ENODEV) if port identifier is invalid. + * - (-EIO) if device is removed. * - (-ENOTSUP) if hardware doesn't support. * - (-EINVAL) if bad parameter. */ -int rte_eth_dev_rss_hash_update(uint8_t port_id, +int rte_eth_dev_rss_hash_update(uint16_t port_id, struct rte_eth_rss_conf *rss_conf); /** @@ -3303,15 +3000,19 @@ int rte_eth_dev_rss_hash_update(uint8_t port_id, * @return * - (0) if successful. * - (-ENODEV) if port identifier is invalid. + * - (-EIO) if device is removed. * - (-ENOTSUP) if hardware doesn't support RSS. */ int -rte_eth_dev_rss_hash_conf_get(uint8_t port_id, +rte_eth_dev_rss_hash_conf_get(uint16_t port_id, struct rte_eth_rss_conf *rss_conf); /** - * Add UDP tunneling port of an Ethernet device for filtering a specific - * tunneling packet by UDP port number. + * Add UDP tunneling port for a specific type of tunnel. + * The packets with this UDP port will be identified as this type of tunnel. + * Before enabling any offloading function for a tunnel, users can call this API + * to change or add more UDP port for the tunnel. So the offloading function + * can take effect on the packets with the specific UDP port. * * @param port_id * The port identifier of the Ethernet device. @@ -3321,14 +3022,20 @@ rte_eth_dev_rss_hash_conf_get(uint8_t port_id, * @return * - (0) if successful. * - (-ENODEV) if port identifier is invalid. + * - (-EIO) if device is removed. * - (-ENOTSUP) if hardware doesn't support tunnel type. */ int -rte_eth_dev_udp_tunnel_add(uint8_t port_id, - struct rte_eth_udp_tunnel *tunnel_udp); +rte_eth_dev_udp_tunnel_port_add(uint16_t port_id, + struct rte_eth_udp_tunnel *tunnel_udp); /** - * Detete UDP tunneling port configuration of Ethernet device + * Delete UDP tunneling port a specific type of tunnel. + * The packets with this UDP port will not be identified as this type of tunnel + * any more. + * Before enabling any offloading function for a tunnel, users can call this API + * to delete a UDP port for the tunnel. So the offloading function will not take + * effect on the packets with the specific UDP port. * * @param port_id * The port identifier of the Ethernet device. @@ -3338,11 +3045,12 @@ rte_eth_dev_udp_tunnel_add(uint8_t port_id, * @return * - (0) if successful. * - (-ENODEV) if port identifier is invalid. + * - (-EIO) if device is removed. * - (-ENOTSUP) if hardware doesn't support tunnel type. */ int -rte_eth_dev_udp_tunnel_delete(uint8_t port_id, - struct rte_eth_udp_tunnel *tunnel_udp); +rte_eth_dev_udp_tunnel_port_delete(uint16_t port_id, + struct rte_eth_udp_tunnel *tunnel_udp); /** * Check whether the filter type is supported on an Ethernet device. @@ -3356,8 +3064,10 @@ rte_eth_dev_udp_tunnel_delete(uint8_t port_id, * - (0) if successful. * - (-ENOTSUP) if hardware doesn't support this filter type. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. */ -int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type); +int rte_eth_dev_filter_supported(uint16_t port_id, + enum rte_filter_type filter_type); /** * Take operations to assigned filter type on an Ethernet device. @@ -3375,11 +3085,30 @@ int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_ty * - (0) if successful. * - (-ENOTSUP) if hardware doesn't support. * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. * - others depends on the specific operations implementation. */ -int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type, +int rte_eth_dev_filter_ctrl(uint16_t port_id, enum rte_filter_type filter_type, enum rte_filter_op filter_op, void *arg); +/** + * Get DCB information on an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param dcb_info + * dcb information. + * @return + * - (0) if successful. + * - (-ENODEV) if port identifier is invalid. + * - (-EIO) if device is removed. + * - (-ENOTSUP) if hardware doesn't support. + */ +int rte_eth_dev_get_dcb_info(uint16_t port_id, + struct rte_eth_dcb_info *dcb_info); + +struct rte_eth_rxtx_callback; + /** * Add a callback to be called on packet RX on a given port and queue. * @@ -3388,6 +3117,37 @@ int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type, * that can be used to later remove the callback using * rte_eth_remove_rx_callback(). * + * Multiple functions are called in the order that they are added. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The queue on the Ethernet device on which the callback is to be added. + * @param fn + * The callback function + * @param user_param + * A generic pointer parameter which will be passed to each invocation of the + * callback function on this port and queue. + * + * @return + * NULL on error. + * On success, a pointer value which can later be used to remove the callback. + */ +const struct rte_eth_rxtx_callback * +rte_eth_add_rx_callback(uint16_t port_id, uint16_t queue_id, + rte_rx_callback_fn fn, void *user_param); + +/** + * Add a callback that must be called first on packet RX on a given port + * and queue. + * + * This API configures a first function to be called for each burst of + * packets received on a given NIC port queue. The return value is a pointer + * that can be used to later remove the callback using + * rte_eth_remove_rx_callback(). + * + * Multiple functions are called in the order that they are added. + * * @param port_id * The port identifier of the Ethernet device. * @param queue_id @@ -3402,8 +3162,9 @@ int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type, * NULL on error. * On success, a pointer value which can later be used to remove the callback. */ -void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id, - rte_rxtx_callback_fn fn, void *user_param); +const struct rte_eth_rxtx_callback * +rte_eth_add_first_rx_callback(uint16_t port_id, uint16_t queue_id, + rte_rx_callback_fn fn, void *user_param); /** * Add a callback to be called on packet TX on a given port and queue. @@ -3413,6 +3174,8 @@ void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id, * that can be used to later remove the callback using * rte_eth_remove_tx_callback(). * + * Multiple functions are called in the order that they are added. + * * @param port_id * The port identifier of the Ethernet device. * @param queue_id @@ -3427,8 +3190,9 @@ void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id, * NULL on error. * On success, a pointer value which can later be used to remove the callback. */ -void *rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id, - rte_rxtx_callback_fn fn, void *user_param); +const struct rte_eth_rxtx_callback * +rte_eth_add_tx_callback(uint16_t port_id, uint16_t queue_id, + rte_tx_callback_fn fn, void *user_param); /** * Remove an RX packet callback from a given port and queue. @@ -3440,9 +3204,9 @@ void *rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id, * since the it may still be in use. The memory for the callback can be * subsequently freed back by the application by calling rte_free(): * - * - Immediately - if the port is stopped, or the user knows that no - * callbacks are in flight e.g. if called from the thread doing RX/TX - * on that queue. + * - Immediately - if the port is stopped, or the user knows that no + * callbacks are in flight e.g. if called from the thread doing RX/TX + * on that queue. * * - After a short delay - where the delay is sufficient to allow any * in-flight callbacks to complete. @@ -3460,8 +3224,8 @@ void *rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id, * - -EINVAL: The port_id or the queue_id is out of range, or the callback * is NULL or not found for the port/queue. */ -int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id, - struct rte_eth_rxtx_callback *user_cb); +int rte_eth_remove_rx_callback(uint16_t port_id, uint16_t queue_id, + const struct rte_eth_rxtx_callback *user_cb); /** * Remove a TX packet callback from a given port and queue. @@ -3473,9 +3237,9 @@ int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id, * since the it may still be in use. The memory for the callback can be * subsequently freed back by the application by calling rte_free(): * - * - Immediately - if the port is stopped, or the user knows that no - * callbacks are in flight e.g. if called from the thread doing RX/TX - * on that queue. + * - Immediately - if the port is stopped, or the user knows that no + * callbacks are in flight e.g. if called from the thread doing RX/TX + * on that queue. * * - After a short delay - where the delay is sufficient to allow any * in-flight callbacks to complete. @@ -3493,8 +3257,1005 @@ int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id, * - -EINVAL: The port_id or the queue_id is out of range, or the callback * is NULL or not found for the port/queue. */ -int rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id, - struct rte_eth_rxtx_callback *user_cb); +int rte_eth_remove_tx_callback(uint16_t port_id, uint16_t queue_id, + const struct rte_eth_rxtx_callback *user_cb); + +/** + * Retrieve information about given port's RX queue. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The RX queue on the Ethernet device for which information + * will be retrieved. + * @param qinfo + * A pointer to a structure of type *rte_eth_rxq_info_info* to be filled with + * the information of the Ethernet device. + * + * @return + * - 0: Success + * - -ENOTSUP: routine is not supported by the device PMD. + * - -EINVAL: The port_id or the queue_id is out of range. + */ +int rte_eth_rx_queue_info_get(uint16_t port_id, uint16_t queue_id, + struct rte_eth_rxq_info *qinfo); + +/** + * Retrieve information about given port's TX queue. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The TX queue on the Ethernet device for which information + * will be retrieved. + * @param qinfo + * A pointer to a structure of type *rte_eth_txq_info_info* to be filled with + * the information of the Ethernet device. + * + * @return + * - 0: Success + * - -ENOTSUP: routine is not supported by the device PMD. + * - -EINVAL: The port_id or the queue_id is out of range. + */ +int rte_eth_tx_queue_info_get(uint16_t port_id, uint16_t queue_id, + struct rte_eth_txq_info *qinfo); + +/** + * Retrieve device registers and register attributes (number of registers and + * register size) + * + * @param port_id + * The port identifier of the Ethernet device. + * @param info + * Pointer to rte_dev_reg_info structure to fill in. If info->data is + * NULL the function fills in the width and length fields. If non-NULL + * the registers are put into the buffer pointed at by the data field. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_get_reg_info(uint16_t port_id, struct rte_dev_reg_info *info); + +/** + * Retrieve size of device EEPROM + * + * @param port_id + * The port identifier of the Ethernet device. + * @return + * - (>=0) EEPROM size if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_get_eeprom_length(uint16_t port_id); + +/** + * Retrieve EEPROM and EEPROM attribute + * + * @param port_id + * The port identifier of the Ethernet device. + * @param info + * The template includes buffer for return EEPROM data and + * EEPROM attributes to be filled. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_get_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info); + +/** + * Program EEPROM with provided data + * + * @param port_id + * The port identifier of the Ethernet device. + * @param info + * The template includes EEPROM data for programming and + * EEPROM attributes to be filled + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. + * - others depends on the specific operations implementation. + */ +int rte_eth_dev_set_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Retrieve the type and size of plugin module EEPROM + * + * @param port_id + * The port identifier of the Ethernet device. + * @param modinfo + * The type and size of plugin module EEPROM. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. + * - others depends on the specific operations implementation. + */ +int __rte_experimental +rte_eth_dev_get_module_info(uint16_t port_id, + struct rte_eth_dev_module_info *modinfo); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice. + * + * Retrieve the data of plugin module EEPROM + * + * @param port_id + * The port identifier of the Ethernet device. + * @param info + * The template includes the plugin module EEPROM attributes, and the + * buffer for return plugin module EEPROM data. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support. + * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. + * - others depends on the specific operations implementation. + */ +int __rte_experimental +rte_eth_dev_get_module_eeprom(uint16_t port_id, + struct rte_dev_eeprom_info *info); + +/** + * Set the list of multicast addresses to filter on an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param mc_addr_set + * The array of multicast addresses to set. Equal to NULL when the function + * is invoked to flush the set of filtered addresses. + * @param nb_mc_addr + * The number of multicast addresses in the *mc_addr_set* array. Equal to 0 + * when the function is invoked to flush the set of filtered addresses. + * @return + * - (0) if successful. + * - (-ENODEV) if *port_id* invalid. + * - (-EIO) if device is removed. + * - (-ENOTSUP) if PMD of *port_id* doesn't support multicast filtering. + * - (-ENOSPC) if *port_id* has not enough multicast filtering resources. + */ +int rte_eth_dev_set_mc_addr_list(uint16_t port_id, + struct ether_addr *mc_addr_set, + uint32_t nb_mc_addr); + +/** + * Enable IEEE1588/802.1AS timestamping for an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * + * @return + * - 0: Success. + * - -ENODEV: The port ID is invalid. + * - -EIO: if device is removed. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +int rte_eth_timesync_enable(uint16_t port_id); + +/** + * Disable IEEE1588/802.1AS timestamping for an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * + * @return + * - 0: Success. + * - -ENODEV: The port ID is invalid. + * - -EIO: if device is removed. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +int rte_eth_timesync_disable(uint16_t port_id); + +/** + * Read an IEEE1588/802.1AS RX timestamp from an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param timestamp + * Pointer to the timestamp struct. + * @param flags + * Device specific flags. Used to pass the RX timesync register index to + * i40e. Unused in igb/ixgbe, pass 0 instead. + * + * @return + * - 0: Success. + * - -EINVAL: No timestamp is available. + * - -ENODEV: The port ID is invalid. + * - -EIO: if device is removed. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +int rte_eth_timesync_read_rx_timestamp(uint16_t port_id, + struct timespec *timestamp, uint32_t flags); + +/** + * Read an IEEE1588/802.1AS TX timestamp from an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param timestamp + * Pointer to the timestamp struct. + * + * @return + * - 0: Success. + * - -EINVAL: No timestamp is available. + * - -ENODEV: The port ID is invalid. + * - -EIO: if device is removed. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +int rte_eth_timesync_read_tx_timestamp(uint16_t port_id, + struct timespec *timestamp); + +/** + * Adjust the timesync clock on an Ethernet device. + * + * This is usually used in conjunction with other Ethdev timesync functions to + * synchronize the device time using the IEEE1588/802.1AS protocol. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param delta + * The adjustment in nanoseconds. + * + * @return + * - 0: Success. + * - -ENODEV: The port ID is invalid. + * - -EIO: if device is removed. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta); + +/** + * Read the time from the timesync clock on an Ethernet device. + * + * This is usually used in conjunction with other Ethdev timesync functions to + * synchronize the device time using the IEEE1588/802.1AS protocol. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param time + * Pointer to the timespec struct that holds the time. + * + * @return + * - 0: Success. + */ +int rte_eth_timesync_read_time(uint16_t port_id, struct timespec *time); + +/** + * Set the time of the timesync clock on an Ethernet device. + * + * This is usually used in conjunction with other Ethdev timesync functions to + * synchronize the device time using the IEEE1588/802.1AS protocol. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param time + * Pointer to the timespec struct that holds the time. + * + * @return + * - 0: Success. + * - -EINVAL: No timestamp is available. + * - -ENODEV: The port ID is invalid. + * - -EIO: if device is removed. + * - -ENOTSUP: The function is not supported by the Ethernet driver. + */ +int rte_eth_timesync_write_time(uint16_t port_id, const struct timespec *time); + +/** + * Config l2 tunnel ether type of an Ethernet device for filtering specific + * tunnel packets by ether type. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param l2_tunnel + * l2 tunnel configuration. + * + * @return + * - (0) if successful. + * - (-ENODEV) if port identifier is invalid. + * - (-EIO) if device is removed. + * - (-ENOTSUP) if hardware doesn't support tunnel type. + */ +int +rte_eth_dev_l2_tunnel_eth_type_conf(uint16_t port_id, + struct rte_eth_l2_tunnel_conf *l2_tunnel); + +/** + * Enable/disable l2 tunnel offload functions. Include, + * 1, The ability of parsing a type of l2 tunnel of an Ethernet device. + * Filtering, forwarding and offloading this type of tunnel packets depend on + * this ability. + * 2, Stripping the l2 tunnel tag. + * 3, Insertion of the l2 tunnel tag. + * 4, Forwarding the packets based on the l2 tunnel tag. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param l2_tunnel + * l2 tunnel parameters. + * @param mask + * Indicate the offload function. + * @param en + * Enable or disable this function. + * + * @return + * - (0) if successful. + * - (-ENODEV) if port identifier is invalid. + * - (-EIO) if device is removed. + * - (-ENOTSUP) if hardware doesn't support tunnel type. + */ +int +rte_eth_dev_l2_tunnel_offload_set(uint16_t port_id, + struct rte_eth_l2_tunnel_conf *l2_tunnel, + uint32_t mask, + uint8_t en); + +/** +* Get the port id from pci address or device name +* Ex: 0000:2:00.0 or vdev name net_pcap0 +* +* @param name +* pci address or name of the device +* @param port_id +* pointer to port identifier of the device +* @return +* - (0) if successful and port_id is filled. +* - (-ENODEV or -EINVAL) on failure. +*/ +int +rte_eth_dev_get_port_by_name(const char *name, uint16_t *port_id); + +/** +* Get the device name from port id +* +* @param port_id +* pointer to port identifier of the device +* @param name +* pci address or name of the device +* @return +* - (0) if successful. +* - (-EINVAL) on failure. +*/ +int +rte_eth_dev_get_name_by_port(uint16_t port_id, char *name); + +/** + * Check that numbers of Rx and Tx descriptors satisfy descriptors limits from + * the ethernet device information, otherwise adjust them to boundaries. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param nb_rx_desc + * A pointer to a uint16_t where the number of receive + * descriptors stored. + * @param nb_tx_desc + * A pointer to a uint16_t where the number of transmit + * descriptors stored. + * @return + * - (0) if successful. + * - (-ENOTSUP, -ENODEV or -EINVAL) on failure. + */ +int rte_eth_dev_adjust_nb_rx_tx_desc(uint16_t port_id, + uint16_t *nb_rx_desc, + uint16_t *nb_tx_desc); + +/** + * Test if a port supports specific mempool ops. + * + * @param port_id + * Port identifier of the Ethernet device. + * @param [in] pool + * The name of the pool operations to test. + * @return + * - 0: best mempool ops choice for this port. + * - 1: mempool ops are supported for this port. + * - -ENOTSUP: mempool ops not supported for this port. + * - -ENODEV: Invalid port Identifier. + * - -EINVAL: Pool param is null. + */ +int +rte_eth_dev_pool_ops_supported(uint16_t port_id, const char *pool); + +/** + * Get the security context for the Ethernet device. + * + * @param port_id + * Port identifier of the Ethernet device + * @return + * - NULL on error. + * - pointer to security context on success. + */ +void * +rte_eth_dev_get_sec_ctx(uint16_t port_id); + + +#include + +/** + * + * Retrieve a burst of input packets from a receive queue of an Ethernet + * device. The retrieved packets are stored in *rte_mbuf* structures whose + * pointers are supplied in the *rx_pkts* array. + * + * The rte_eth_rx_burst() function loops, parsing the RX ring of the + * receive queue, up to *nb_pkts* packets, and for each completed RX + * descriptor in the ring, it performs the following operations: + * + * - Initialize the *rte_mbuf* data structure associated with the + * RX descriptor according to the information provided by the NIC into + * that RX descriptor. + * + * - Store the *rte_mbuf* data structure into the next entry of the + * *rx_pkts* array. + * + * - Replenish the RX descriptor with a new *rte_mbuf* buffer + * allocated from the memory pool associated with the receive queue at + * initialization time. + * + * When retrieving an input packet that was scattered by the controller + * into multiple receive descriptors, the rte_eth_rx_burst() function + * appends the associated *rte_mbuf* buffers to the first buffer of the + * packet. + * + * The rte_eth_rx_burst() function returns the number of packets + * actually retrieved, which is the number of *rte_mbuf* data structures + * effectively supplied into the *rx_pkts* array. + * A return value equal to *nb_pkts* indicates that the RX queue contained + * at least *rx_pkts* packets, and this is likely to signify that other + * received packets remain in the input queue. Applications implementing + * a "retrieve as much received packets as possible" policy can check this + * specific case and keep invoking the rte_eth_rx_burst() function until + * a value less than *nb_pkts* is returned. + * + * This receive method has the following advantages: + * + * - It allows a run-to-completion network stack engine to retrieve and + * to immediately process received packets in a fast burst-oriented + * approach, avoiding the overhead of unnecessary intermediate packet + * queue/dequeue operations. + * + * - Conversely, it also allows an asynchronous-oriented processing + * method to retrieve bursts of received packets and to immediately + * queue them for further parallel processing by another logical core, + * for instance. However, instead of having received packets being + * individually queued by the driver, this approach allows the caller + * of the rte_eth_rx_burst() function to queue a burst of retrieved + * packets at a time and therefore dramatically reduce the cost of + * enqueue/dequeue operations per packet. + * + * - It allows the rte_eth_rx_burst() function of the driver to take + * advantage of burst-oriented hardware features (CPU cache, + * prefetch instructions, and so on) to minimize the number of CPU + * cycles per packet. + * + * To summarize, the proposed receive API enables many + * burst-oriented optimizations in both synchronous and asynchronous + * packet processing environments with no overhead in both cases. + * + * The rte_eth_rx_burst() function does not provide any error + * notification to avoid the corresponding overhead. As a hint, the + * upper-level application might check the status of the device link once + * being systematically returned a 0 value for a given number of tries. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The index of the receive queue from which to retrieve input packets. + * The value must be in the range [0, nb_rx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param rx_pkts + * The address of an array of pointers to *rte_mbuf* structures that + * must be large enough to store *nb_pkts* pointers in it. + * @param nb_pkts + * The maximum number of packets to retrieve. + * @return + * The number of packets actually retrieved, which is the number + * of pointers to *rte_mbuf* structures effectively supplied to the + * *rx_pkts* array. + */ +static inline uint16_t +rte_eth_rx_burst(uint16_t port_id, uint16_t queue_id, + struct rte_mbuf **rx_pkts, const uint16_t nb_pkts) +{ + struct rte_eth_dev *dev = &rte_eth_devices[port_id]; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0); + RTE_FUNC_PTR_OR_ERR_RET(*dev->rx_pkt_burst, 0); + + if (queue_id >= dev->data->nb_rx_queues) { + RTE_PMD_DEBUG_TRACE("Invalid RX queue_id=%d\n", queue_id); + return 0; + } +#endif + int16_t nb_rx = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id], + rx_pkts, nb_pkts); + +#ifdef RTE_ETHDEV_RXTX_CALLBACKS + struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id]; + + if (unlikely(cb != NULL)) { + do { + nb_rx = cb->fn.rx(port_id, queue_id, rx_pkts, nb_rx, + nb_pkts, cb->param); + cb = cb->next; + } while (cb != NULL); + } +#endif + + return nb_rx; +} + +/** + * Get the number of used descriptors of a rx queue + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The queue id on the specific port. + * @return + * The number of used descriptors in the specific queue, or: + * (-EINVAL) if *port_id* or *queue_id* is invalid + * (-ENOTSUP) if the device does not support this function + */ +static inline int +rte_eth_rx_queue_count(uint16_t port_id, uint16_t queue_id) +{ + struct rte_eth_dev *dev; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL); + dev = &rte_eth_devices[port_id]; + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_count, -ENOTSUP); + if (queue_id >= dev->data->nb_rx_queues) + return -EINVAL; + + return (*dev->dev_ops->rx_queue_count)(dev, queue_id); +} + +/** + * Check if the DD bit of the specific RX descriptor in the queue has been set + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The queue id on the specific port. + * @param offset + * The offset of the descriptor ID from tail. + * @return + * - (1) if the specific DD bit is set. + * - (0) if the specific DD bit is not set. + * - (-ENODEV) if *port_id* invalid. + * - (-ENOTSUP) if the device does not support this function + */ +static inline int +rte_eth_rx_descriptor_done(uint16_t port_id, uint16_t queue_id, uint16_t offset) +{ + struct rte_eth_dev *dev = &rte_eth_devices[port_id]; + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_descriptor_done, -ENOTSUP); + return (*dev->dev_ops->rx_descriptor_done)( \ + dev->data->rx_queues[queue_id], offset); +} + +#define RTE_ETH_RX_DESC_AVAIL 0 /**< Desc available for hw. */ +#define RTE_ETH_RX_DESC_DONE 1 /**< Desc done, filled by hw. */ +#define RTE_ETH_RX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */ + +/** + * Check the status of a Rx descriptor in the queue + * + * It should be called in a similar context than the Rx function: + * - on a dataplane core + * - not concurrently on the same queue + * + * Since it's a dataplane function, no check is performed on port_id and + * queue_id. The caller must therefore ensure that the port is enabled + * and the queue is configured and running. + * + * Note: accessing to a random descriptor in the ring may trigger cache + * misses and have a performance impact. + * + * @param port_id + * A valid port identifier of the Ethernet device which. + * @param queue_id + * A valid Rx queue identifier on this port. + * @param offset + * The offset of the descriptor starting from tail (0 is the next + * packet to be received by the driver). + * + * @return + * - (RTE_ETH_RX_DESC_AVAIL): Descriptor is available for the hardware to + * receive a packet. + * - (RTE_ETH_RX_DESC_DONE): Descriptor is done, it is filled by hw, but + * not yet processed by the driver (i.e. in the receive queue). + * - (RTE_ETH_RX_DESC_UNAVAIL): Descriptor is unavailable, either hold by + * the driver and not yet returned to hw, or reserved by the hw. + * - (-EINVAL) bad descriptor offset. + * - (-ENOTSUP) if the device does not support this function. + * - (-ENODEV) bad port or queue (only if compiled with debug). + */ +static inline int +rte_eth_rx_descriptor_status(uint16_t port_id, uint16_t queue_id, + uint16_t offset) +{ + struct rte_eth_dev *dev; + void *rxq; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); +#endif + dev = &rte_eth_devices[port_id]; +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + if (queue_id >= dev->data->nb_rx_queues) + return -ENODEV; +#endif + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_descriptor_status, -ENOTSUP); + rxq = dev->data->rx_queues[queue_id]; + + return (*dev->dev_ops->rx_descriptor_status)(rxq, offset); +} + +#define RTE_ETH_TX_DESC_FULL 0 /**< Desc filled for hw, waiting xmit. */ +#define RTE_ETH_TX_DESC_DONE 1 /**< Desc done, packet is transmitted. */ +#define RTE_ETH_TX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */ + +/** + * Check the status of a Tx descriptor in the queue. + * + * It should be called in a similar context than the Tx function: + * - on a dataplane core + * - not concurrently on the same queue + * + * Since it's a dataplane function, no check is performed on port_id and + * queue_id. The caller must therefore ensure that the port is enabled + * and the queue is configured and running. + * + * Note: accessing to a random descriptor in the ring may trigger cache + * misses and have a performance impact. + * + * @param port_id + * A valid port identifier of the Ethernet device which. + * @param queue_id + * A valid Tx queue identifier on this port. + * @param offset + * The offset of the descriptor starting from tail (0 is the place where + * the next packet will be send). + * + * @return + * - (RTE_ETH_TX_DESC_FULL) Descriptor is being processed by the hw, i.e. + * in the transmit queue. + * - (RTE_ETH_TX_DESC_DONE) Hardware is done with this descriptor, it can + * be reused by the driver. + * - (RTE_ETH_TX_DESC_UNAVAIL): Descriptor is unavailable, reserved by the + * driver or the hardware. + * - (-EINVAL) bad descriptor offset. + * - (-ENOTSUP) if the device does not support this function. + * - (-ENODEV) bad port or queue (only if compiled with debug). + */ +static inline int rte_eth_tx_descriptor_status(uint16_t port_id, + uint16_t queue_id, uint16_t offset) +{ + struct rte_eth_dev *dev; + void *txq; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); +#endif + dev = &rte_eth_devices[port_id]; +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + if (queue_id >= dev->data->nb_tx_queues) + return -ENODEV; +#endif + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_descriptor_status, -ENOTSUP); + txq = dev->data->tx_queues[queue_id]; + + return (*dev->dev_ops->tx_descriptor_status)(txq, offset); +} + +/** + * Send a burst of output packets on a transmit queue of an Ethernet device. + * + * The rte_eth_tx_burst() function is invoked to transmit output packets + * on the output queue *queue_id* of the Ethernet device designated by its + * *port_id*. + * The *nb_pkts* parameter is the number of packets to send which are + * supplied in the *tx_pkts* array of *rte_mbuf* structures, each of them + * allocated from a pool created with rte_pktmbuf_pool_create(). + * The rte_eth_tx_burst() function loops, sending *nb_pkts* packets, + * up to the number of transmit descriptors available in the TX ring of the + * transmit queue. + * For each packet to send, the rte_eth_tx_burst() function performs + * the following operations: + * + * - Pick up the next available descriptor in the transmit ring. + * + * - Free the network buffer previously sent with that descriptor, if any. + * + * - Initialize the transmit descriptor with the information provided + * in the *rte_mbuf data structure. + * + * In the case of a segmented packet composed of a list of *rte_mbuf* buffers, + * the rte_eth_tx_burst() function uses several transmit descriptors + * of the ring. + * + * The rte_eth_tx_burst() function returns the number of packets it + * actually sent. A return value equal to *nb_pkts* means that all packets + * have been sent, and this is likely to signify that other output packets + * could be immediately transmitted again. Applications that implement a + * "send as many packets to transmit as possible" policy can check this + * specific case and keep invoking the rte_eth_tx_burst() function until + * a value less than *nb_pkts* is returned. + * + * It is the responsibility of the rte_eth_tx_burst() function to + * transparently free the memory buffers of packets previously sent. + * This feature is driven by the *tx_free_thresh* value supplied to the + * rte_eth_dev_configure() function at device configuration time. + * When the number of free TX descriptors drops below this threshold, the + * rte_eth_tx_burst() function must [attempt to] free the *rte_mbuf* buffers + * of those packets whose transmission was effectively completed. + * + * If the PMD is DEV_TX_OFFLOAD_MT_LOCKFREE capable, multiple threads can + * invoke this function concurrently on the same tx queue without SW lock. + * @see rte_eth_dev_info_get, struct rte_eth_txconf::txq_flags + * + * @see rte_eth_tx_prepare to perform some prior checks or adjustments + * for offloads. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The index of the transmit queue through which output packets must be + * sent. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param tx_pkts + * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures + * which contain the output packets. + * @param nb_pkts + * The maximum number of packets to transmit. + * @return + * The number of output packets actually stored in transmit descriptors of + * the transmit ring. The return value can be less than the value of the + * *tx_pkts* parameter when the transmit ring is full or has been filled up. + */ +static inline uint16_t +rte_eth_tx_burst(uint16_t port_id, uint16_t queue_id, + struct rte_mbuf **tx_pkts, uint16_t nb_pkts) +{ + struct rte_eth_dev *dev = &rte_eth_devices[port_id]; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0); + RTE_FUNC_PTR_OR_ERR_RET(*dev->tx_pkt_burst, 0); + + if (queue_id >= dev->data->nb_tx_queues) { + RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id); + return 0; + } +#endif + +#ifdef RTE_ETHDEV_RXTX_CALLBACKS + struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id]; + + if (unlikely(cb != NULL)) { + do { + nb_pkts = cb->fn.tx(port_id, queue_id, tx_pkts, nb_pkts, + cb->param); + cb = cb->next; + } while (cb != NULL); + } +#endif + + return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts); +} + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice + * + * Process a burst of output packets on a transmit queue of an Ethernet device. + * + * The rte_eth_tx_prepare() function is invoked to prepare output packets to be + * transmitted on the output queue *queue_id* of the Ethernet device designated + * by its *port_id*. + * The *nb_pkts* parameter is the number of packets to be prepared which are + * supplied in the *tx_pkts* array of *rte_mbuf* structures, each of them + * allocated from a pool created with rte_pktmbuf_pool_create(). + * For each packet to send, the rte_eth_tx_prepare() function performs + * the following operations: + * + * - Check if packet meets devices requirements for tx offloads. + * + * - Check limitations about number of segments. + * + * - Check additional requirements when debug is enabled. + * + * - Update and/or reset required checksums when tx offload is set for packet. + * + * Since this function can modify packet data, provided mbufs must be safely + * writable (e.g. modified data cannot be in shared segment). + * + * The rte_eth_tx_prepare() function returns the number of packets ready to be + * sent. A return value equal to *nb_pkts* means that all packets are valid and + * ready to be sent, otherwise stops processing on the first invalid packet and + * leaves the rest packets untouched. + * + * When this functionality is not implemented in the driver, all packets are + * are returned untouched. + * + * @param port_id + * The port identifier of the Ethernet device. + * The value must be a valid port id. + * @param queue_id + * The index of the transmit queue through which output packets must be + * sent. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param tx_pkts + * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures + * which contain the output packets. + * @param nb_pkts + * The maximum number of packets to process. + * @return + * The number of packets correct and ready to be sent. The return value can be + * less than the value of the *tx_pkts* parameter when some packet doesn't + * meet devices requirements with rte_errno set appropriately: + * - -EINVAL: offload flags are not correctly set + * - -ENOTSUP: the offload feature is not supported by the hardware + * + */ + +#ifndef RTE_ETHDEV_TX_PREPARE_NOOP + +static inline uint16_t +rte_eth_tx_prepare(uint16_t port_id, uint16_t queue_id, + struct rte_mbuf **tx_pkts, uint16_t nb_pkts) +{ + struct rte_eth_dev *dev; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + if (!rte_eth_dev_is_valid_port(port_id)) { + RTE_PMD_DEBUG_TRACE("Invalid TX port_id=%d\n", port_id); + rte_errno = -EINVAL; + return 0; + } +#endif + + dev = &rte_eth_devices[port_id]; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + if (queue_id >= dev->data->nb_tx_queues) { + RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id); + rte_errno = -EINVAL; + return 0; + } +#endif + + if (!dev->tx_pkt_prepare) + return nb_pkts; + + return (*dev->tx_pkt_prepare)(dev->data->tx_queues[queue_id], + tx_pkts, nb_pkts); +} + +#else + +/* + * Native NOOP operation for compilation targets which doesn't require any + * preparations steps, and functional NOOP may introduce unnecessary performance + * drop. + * + * Generally this is not a good idea to turn it on globally and didn't should + * be used if behavior of tx_preparation can change. + */ + +static inline uint16_t +rte_eth_tx_prepare(__rte_unused uint16_t port_id, + __rte_unused uint16_t queue_id, + __rte_unused struct rte_mbuf **tx_pkts, uint16_t nb_pkts) +{ + return nb_pkts; +} + +#endif + +/** + * Send any packets queued up for transmission on a port and HW queue + * + * This causes an explicit flush of packets previously buffered via the + * rte_eth_tx_buffer() function. It returns the number of packets successfully + * sent to the NIC, and calls the error callback for any unsent packets. Unless + * explicitly set up otherwise, the default callback simply frees the unsent + * packets back to the owning mempool. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The index of the transmit queue through which output packets must be + * sent. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param buffer + * Buffer of packets to be transmit. + * @return + * The number of packets successfully sent to the Ethernet device. The error + * callback is called for any packets which could not be sent. + */ +static inline uint16_t +rte_eth_tx_buffer_flush(uint16_t port_id, uint16_t queue_id, + struct rte_eth_dev_tx_buffer *buffer) +{ + uint16_t sent; + uint16_t to_send = buffer->length; + + if (to_send == 0) + return 0; + + sent = rte_eth_tx_burst(port_id, queue_id, buffer->pkts, to_send); + + buffer->length = 0; + + /* All packets sent, or to be dealt with by callback below */ + if (unlikely(sent != to_send)) + buffer->error_callback(&buffer->pkts[sent], to_send - sent, + buffer->error_userdata); + + return sent; +} + +/** + * Buffer a single packet for future transmission on a port and queue + * + * This function takes a single mbuf/packet and buffers it for later + * transmission on the particular port and queue specified. Once the buffer is + * full of packets, an attempt will be made to transmit all the buffered + * packets. In case of error, where not all packets can be transmitted, a + * callback is called with the unsent packets as a parameter. If no callback + * is explicitly set up, the unsent packets are just freed back to the owning + * mempool. The function returns the number of packets actually sent i.e. + * 0 if no buffer flush occurred, otherwise the number of packets successfully + * flushed + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The index of the transmit queue through which output packets must be + * sent. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param buffer + * Buffer used to collect packets to be sent. + * @param tx_pkt + * Pointer to the packet mbuf to be sent. + * @return + * 0 = packet has been buffered for later transmission + * N > 0 = packet has been buffered, and the buffer was subsequently flushed, + * causing N packets to be sent, and the error callback to be called for + * the rest. + */ +static __rte_always_inline uint16_t +rte_eth_tx_buffer(uint16_t port_id, uint16_t queue_id, + struct rte_eth_dev_tx_buffer *buffer, struct rte_mbuf *tx_pkt) +{ + buffer->pkts[buffer->length++] = tx_pkt; + if (buffer->length < buffer->size) + return 0; + + return rte_eth_tx_buffer_flush(port_id, queue_id, buffer); +} #ifdef __cplusplus }