X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_ether%2Frte_ethdev.h;h=5f78a9b9345b404ba5a193de746a9a14ac073829;hb=c830cb295411fc71c3f3d3591308d531937dd58f;hp=4dac364a268cf43e2ee16b14512943cd7a6867af;hpb=001a1c0f98f4e3ac19c26515892e2448a7547c38;p=dpdk.git

diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 4dac364a26..5f78a9b934 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -255,6 +255,7 @@ struct rte_eth_stats {
 /**
  * A structure used to retrieve link-level information of an Ethernet port.
  */
+__extension__
 struct rte_eth_link {
 	uint32_t link_speed;        /**< ETH_SPEED_NUM_ */
 	uint16_t link_duplex  : 1;  /**< ETH_LINK_[HALF/FULL]_DUPLEX */
@@ -346,6 +347,7 @@ struct rte_eth_rxmode {
 	enum rte_eth_rx_mq_mode mq_mode;
 	uint32_t max_rx_pkt_len;  /**< Only used if jumbo_frame enabled. */
 	uint16_t split_hdr_size;  /**< hdr buf size (header_split enabled).*/
+	__extension__
 	uint16_t header_split : 1, /**< Header Split enable. */
 		hw_ip_checksum   : 1, /**< IP/UDP/TCP checksum offload enable. */
 		hw_vlan_filter   : 1, /**< VLAN filter enable. */
@@ -645,6 +647,7 @@ struct rte_eth_txmode {
 
 	/* For i40e specifically */
 	uint16_t pvid;
+	__extension__
 	uint8_t hw_vlan_reject_tagged : 1,
 		/**< If set, reject sending out tagged pkts */
 		hw_vlan_reject_untagged : 1,
@@ -1691,6 +1694,7 @@ struct rte_eth_dev_data {
 	struct ether_addr* hash_mac_addrs;
 	/** Device Ethernet MAC addresses of hash filtering. */
 	uint8_t port_id;           /**< Device [external] port identifier. */
+	__extension__
 	uint8_t promiscuous   : 1, /**< RX promiscuous mode ON(1) / OFF(0). */
 		scattered_rx : 1,  /**< RX of scattered packets is ON(1) / OFF(0) */
 		all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */
@@ -1870,18 +1874,6 @@ struct eth_driver {
 	unsigned int dev_private_size;    /**< Size of device private data. */
 };
 
-/**
- * @internal
- * A function invoked by the initialization function of an Ethernet driver
- * to simultaneously register itself as a PCI driver and as an Ethernet
- * Poll Mode Driver (PMD).
- *
- * @param eth_drv
- *   The pointer to the *eth_driver* structure associated with
- *   the Ethernet driver.
- */
-void rte_eth_driver_register(struct eth_driver *eth_drv);
-
 /**
  * Convert a numerical speed in Mbps to a bitmap flag that can be used in
  * the bitmap link_speeds of the struct rte_eth_conf
@@ -2042,9 +2034,8 @@ int rte_eth_dev_socket_id(uint8_t port_id);
 int rte_eth_dev_is_valid_port(uint8_t port_id);
 
 /**
- * Allocate mbuf from mempool, setup the DMA physical address
- * and then start RX for specified queue of a port. It is used
- * when rx_deferred_start flag of the specified queue is true.
+ * Start specified RX queue of a port. It is used when rx_deferred_start
+ * flag of the specified queue is true.
  *
  * @param port_id
  *   The port identifier of the Ethernet device
@@ -2053,7 +2044,7 @@ int rte_eth_dev_is_valid_port(uint8_t port_id);
  *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
  *   to rte_eth_dev_configure().
  * @return
- *   - 0: Success, the transmit queue is correctly set up.
+ *   - 0: Success, the receive queue is started.
  *   - -EINVAL: The port_id or the queue_id out of range.
  *   - -ENOTSUP: The function not supported in PMD driver.
  */
@@ -2069,7 +2060,7 @@ int rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id);
  *   The value must be in the range [0, nb_rx_queue - 1] previously supplied
  *   to rte_eth_dev_configure().
  * @return
- *   - 0: Success, the transmit queue is correctly set up.
+ *   - 0: Success, the receive queue is stopped.
  *   - -EINVAL: The port_id or the queue_id out of range.
  *   - -ENOTSUP: The function not supported in PMD driver.
  */
@@ -2086,7 +2077,7 @@ int rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id);
  *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
  *   to rte_eth_dev_configure().
  * @return
- *   - 0: Success, the transmit queue is correctly set up.
+ *   - 0: Success, the transmit queue is started.
  *   - -EINVAL: The port_id or the queue_id out of range.
  *   - -ENOTSUP: The function not supported in PMD driver.
  */
@@ -2102,7 +2093,7 @@ int rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id);
  *   The value must be in the range [0, nb_tx_queue - 1] previously supplied
  *   to rte_eth_dev_configure().
  * @return
- *   - 0: Success, the transmit queue is correctly set up.
+ *   - 0: Success, the transmit queue is stopped.
  *   - -EINVAL: The port_id or the queue_id out of range.
  *   - -ENOTSUP: The function not supported in PMD driver.
  */
@@ -4369,6 +4360,21 @@ rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id);
 int
 rte_eth_dev_get_name_by_port(uint8_t port_id, char *name);
 
+/**
+ * @internal
+ * Wrapper for use by pci drivers as a .probe function to attach to a ethdev
+ * interface.
+ */
+int rte_eth_dev_pci_probe(struct rte_pci_driver *pci_drv,
+			  struct rte_pci_device *pci_dev);
+
+/**
+ * @internal
+ * Wrapper for use by pci drivers as a .remove function to detach a ethdev
+ * interface.
+ */
+int rte_eth_dev_pci_remove(struct rte_pci_device *pci_dev);
+
 #ifdef __cplusplus
 }
 #endif