X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_ether%2Frte_ethdev.h;h=b0d2353dc9a2b0b912f34f9828f063a16e5b5f9b;hb=e261265e42a15164aa649521227f7c2c4740c703;hp=b3ee8728b972f4279c03e1bdce25a26e7a275673;hpb=44a718c457b5f8f034e490a626a9b970a79436ee;p=dpdk.git diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index b3ee8728b9..b0d2353dc9 100644 --- a/lib/librte_ether/rte_ethdev.h +++ b/lib/librte_ether/rte_ethdev.h @@ -179,7 +179,6 @@ extern "C" { #include #include -#include #include #include #include @@ -565,7 +564,7 @@ struct rte_eth_rss_reta_entry64 { /** * This enum indicates the possible number of traffic classes - * in DCB configratioins + * in DCB configurations */ enum rte_eth_nb_tcs { ETH_4_TCS = 4, /**< 4 TCs with DCB. */ @@ -816,9 +815,11 @@ struct rte_eth_udp_tunnel { */ struct rte_intr_conf { /** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */ - uint16_t lsc; + uint32_t lsc:1; /** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */ - uint16_t rxq; + uint32_t rxq:1; + /** enable/disable rmv interrupt. 0 (default) - disable, 1 enable */ + uint32_t rmv:1; }; /** @@ -901,6 +902,8 @@ struct rte_eth_conf { #define DEV_TX_OFFLOAD_GENEVE_TNL_TSO 0x00001000 /**< Used for tunneling packet. */ #define DEV_TX_OFFLOAD_MACSEC_INSERT 0x00002000 +struct rte_pci_device; + /** * Ethernet device information */ @@ -1030,15 +1033,6 @@ struct rte_eth_dev_callback; /** @internal Structure to keep track of registered callbacks */ TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback); - -#ifdef RTE_LIBRTE_ETHDEV_DEBUG -#define RTE_PMD_DEBUG_TRACE(...) \ - rte_pmd_debug_trace(__func__, __VA_ARGS__) -#else -#define RTE_PMD_DEBUG_TRACE(...) -#endif - - /* Macros to check for valid port */ #define RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, retval) do { \ if (!rte_eth_dev_is_valid_port(port_id)) { \ @@ -1054,6 +1048,8 @@ TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback); } \ } while (0) +#define RTE_ETH_DEV_TO_PCI(eth_dev) RTE_DEV_TO_PCI((eth_dev)->device) + /** * l2 tunnel configuration. */ @@ -1118,6 +1114,12 @@ typedef int (*eth_xstats_get_t)(struct rte_eth_dev *dev, struct rte_eth_xstat *stats, unsigned n); /**< @internal Get extended stats of an Ethernet device. */ +typedef int (*eth_xstats_get_by_id_t)(struct rte_eth_dev *dev, + const uint64_t *ids, + uint64_t *values, + unsigned int n); +/**< @internal Get extended stats of an Ethernet device. */ + typedef void (*eth_xstats_reset_t)(struct rte_eth_dev *dev); /**< @internal Reset extended stats of an Ethernet device. */ @@ -1125,6 +1127,11 @@ typedef int (*eth_xstats_get_names_t)(struct rte_eth_dev *dev, struct rte_eth_xstat_name *xstats_names, unsigned size); /**< @internal Get names of extended stats of an Ethernet device. */ +typedef int (*eth_xstats_get_names_by_id_t)(struct rte_eth_dev *dev, + struct rte_eth_xstat_name *xstats_names, const uint64_t *ids, + unsigned int size); +/**< @internal Get names of extended stats of an Ethernet device. */ + typedef int (*eth_queue_stats_mapping_set_t)(struct rte_eth_dev *dev, uint16_t queue_id, uint8_t stat_idx, @@ -1179,6 +1186,12 @@ typedef uint32_t (*eth_rx_queue_count_t)(struct rte_eth_dev *dev, typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset); /**< @internal Check DD bit of specific RX descriptor */ +typedef int (*eth_rx_descriptor_status_t)(void *rxq, uint16_t offset); +/**< @internal Check the status of a Rx descriptor */ + +typedef int (*eth_tx_descriptor_status_t)(void *txq, uint16_t offset); +/**< @internal Check the status of a Tx descriptor */ + typedef int (*eth_fw_version_get_t)(struct rte_eth_dev *dev, char *fw_version, size_t fw_size); /**< @internal Get firmware information of an Ethernet device. */ @@ -1271,7 +1284,7 @@ typedef int (*eth_dev_led_off_t)(struct rte_eth_dev *dev); typedef void (*eth_mac_addr_remove_t)(struct rte_eth_dev *dev, uint32_t index); /**< @internal Remove MAC address from receive address register */ -typedef void (*eth_mac_addr_add_t)(struct rte_eth_dev *dev, +typedef int (*eth_mac_addr_add_t)(struct rte_eth_dev *dev, struct ether_addr *mac_addr, uint32_t index, uint32_t vmdq); @@ -1370,59 +1383,6 @@ typedef int (*eth_l2_tunnel_offload_set_t) uint8_t en); /**< @internal enable/disable the l2 tunnel offload functions */ -#ifdef RTE_NIC_BYPASS - -enum { - RTE_BYPASS_MODE_NONE, - RTE_BYPASS_MODE_NORMAL, - RTE_BYPASS_MODE_BYPASS, - RTE_BYPASS_MODE_ISOLATE, - RTE_BYPASS_MODE_NUM, -}; - -#define RTE_BYPASS_MODE_VALID(x) \ - ((x) > RTE_BYPASS_MODE_NONE && (x) < RTE_BYPASS_MODE_NUM) - -enum { - RTE_BYPASS_EVENT_NONE, - RTE_BYPASS_EVENT_START, - RTE_BYPASS_EVENT_OS_ON = RTE_BYPASS_EVENT_START, - RTE_BYPASS_EVENT_POWER_ON, - RTE_BYPASS_EVENT_OS_OFF, - RTE_BYPASS_EVENT_POWER_OFF, - RTE_BYPASS_EVENT_TIMEOUT, - RTE_BYPASS_EVENT_NUM -}; - -#define RTE_BYPASS_EVENT_VALID(x) \ - ((x) > RTE_BYPASS_EVENT_NONE && (x) < RTE_BYPASS_MODE_NUM) - -enum { - RTE_BYPASS_TMT_OFF, /* timeout disabled. */ - RTE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */ - RTE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */ - RTE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */ - RTE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */ - RTE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */ - RTE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */ - RTE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */ - RTE_BYPASS_TMT_NUM -}; - -#define RTE_BYPASS_TMT_VALID(x) \ - ((x) == RTE_BYPASS_TMT_OFF || \ - ((x) > RTE_BYPASS_TMT_OFF && (x) < RTE_BYPASS_TMT_NUM)) - -typedef void (*bypass_init_t)(struct rte_eth_dev *dev); -typedef int32_t (*bypass_state_set_t)(struct rte_eth_dev *dev, uint32_t *new_state); -typedef int32_t (*bypass_state_show_t)(struct rte_eth_dev *dev, uint32_t *state); -typedef int32_t (*bypass_event_set_t)(struct rte_eth_dev *dev, uint32_t state, uint32_t event); -typedef int32_t (*bypass_event_show_t)(struct rte_eth_dev *dev, uint32_t event_shift, uint32_t *event); -typedef int32_t (*bypass_wd_timeout_set_t)(struct rte_eth_dev *dev, uint32_t timeout); -typedef int32_t (*bypass_wd_timeout_show_t)(struct rte_eth_dev *dev, uint32_t *wd_timeout); -typedef int32_t (*bypass_ver_show_t)(struct rte_eth_dev *dev, uint32_t *ver); -typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev); -#endif typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev, enum rte_filter_type filter_type, @@ -1487,6 +1447,10 @@ struct eth_dev_ops { eth_rx_queue_count_t rx_queue_count; /**< Get the number of used RX descriptors. */ eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit. */ + eth_rx_descriptor_status_t rx_descriptor_status; + /**< Check the status of a Rx descriptor. */ + eth_tx_descriptor_status_t tx_descriptor_status; + /**< Check the status of a Tx descriptor. */ eth_rx_enable_intr_t rx_queue_intr_enable; /**< Enable Rx queue interrupt. */ eth_rx_disable_intr_t rx_queue_intr_disable; /**< Disable Rx queue interrupt. */ eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue. */ @@ -1525,18 +1489,6 @@ struct eth_dev_ops { eth_get_eeprom_t get_eeprom; /**< Get eeprom data. */ eth_set_eeprom_t set_eeprom; /**< Set eeprom. */ - /* bypass control */ -#ifdef RTE_NIC_BYPASS - bypass_init_t bypass_init; - bypass_state_set_t bypass_state_set; - bypass_state_show_t bypass_state_show; - bypass_event_set_t bypass_event_set; - bypass_event_show_t bypass_event_show; - bypass_wd_timeout_set_t bypass_wd_timeout_set; - bypass_wd_timeout_show_t bypass_wd_timeout_show; - bypass_ver_show_t bypass_ver_show; - bypass_wd_reset_t bypass_wd_reset; -#endif eth_filter_ctrl_t filter_ctrl; /**< common filter control. */ @@ -1553,6 +1505,11 @@ struct eth_dev_ops { eth_timesync_adjust_time timesync_adjust_time; /** Adjust the device clock. */ eth_timesync_read_time timesync_read_time; /** Get the device clock time. */ eth_timesync_write_time timesync_write_time; /** Set the device clock time. */ + + eth_xstats_get_by_id_t xstats_get_by_id; + /**< Get extended device statistic values by ID. */ + eth_xstats_get_names_by_id_t xstats_get_names_by_id; + /**< Get name of extended device statistics by ID. */ }; /** @@ -1618,6 +1575,14 @@ struct rte_eth_rxtx_callback { void *param; }; +/** + * A set of values to describe the possible states of an eth device. + */ +enum rte_eth_dev_state { + RTE_ETH_DEV_UNUSED = 0, + RTE_ETH_DEV_ATTACHED, +}; + /** * @internal * The generic data structure associated with each ethernet device. @@ -1633,7 +1598,6 @@ struct rte_eth_dev { eth_tx_burst_t tx_pkt_burst; /**< Pointer to PMD transmit function. */ eth_tx_prep_t tx_pkt_prepare; /**< Pointer to PMD transmit prepare function. */ struct rte_eth_dev_data *data; /**< Pointer to device data */ - const struct eth_driver *driver;/**< Driver for this device */ const struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */ struct rte_device *device; /**< Backing device */ struct rte_intr_handle *intr_handle; /**< Device interrupt handle */ @@ -1649,7 +1613,7 @@ struct rte_eth_dev { * received packets before passing them to the driver for transmission. */ struct rte_eth_rxtx_callback *pre_tx_burst_cbs[RTE_MAX_QUEUES_PER_PORT]; - uint8_t attached; /**< Flag indicating the port is attached */ + enum rte_eth_dev_state state; /**< Flag indicating the port state */ } __rte_cache_aligned; struct rte_eth_dev_sriov { @@ -1719,6 +1683,8 @@ struct rte_eth_dev_data { #define RTE_ETH_DEV_INTR_LSC 0x0002 /** Device is a bonded slave */ #define RTE_ETH_DEV_BONDED_SLAVE 0x0004 +/** Device supports device removal interrupt */ +#define RTE_ETH_DEV_INTR_RMV 0x0008 /** * @internal @@ -1727,6 +1693,25 @@ struct rte_eth_dev_data { */ extern struct rte_eth_dev rte_eth_devices[]; +/** + * Iterates over valid ethdev ports. + * + * @param port_id + * The id of the next possible valid port. + * @return + * Next valid port id, RTE_MAX_ETHPORTS if there is none. + */ +uint8_t rte_eth_find_next(uint8_t port_id); + +/** + * Macro to iterate over all enabled ethdev ports. + */ +#define RTE_ETH_FOREACH_DEV(p) \ + for (p = rte_eth_find_next(0); \ + (unsigned int)p < (unsigned int)RTE_MAX_ETHPORTS; \ + p = rte_eth_find_next(p + 1)) + + /** * Get the total number of Ethernet devices that have been successfully * initialized by the [matching] Ethernet driver during the PCI probing phase. @@ -1735,7 +1720,7 @@ extern struct rte_eth_dev rte_eth_devices[]; * immediately after invoking rte_eal_init(). * If the application unplugs a port using hotplug function, The enabled port * numbers may be noncontiguous. In the case, the applications need to manage - * enabled port by themselves. + * enabled port by using the ``RTE_ETH_FOREACH_DEV()`` macro. * * @return * - The total number of usable Ethernet devices. @@ -1765,6 +1750,19 @@ struct rte_eth_dev *rte_eth_dev_allocated(const char *name); */ struct rte_eth_dev *rte_eth_dev_allocate(const char *name); +/** + * @internal + * Attach to the ethdev already initialized by the primary + * process. + * + * @param name Ethernet device's name. + * @return + * - Success: Slot in the rte_dev_devices array for attached + * device. + * - Error: Null pointer. + */ +struct rte_eth_dev *rte_eth_dev_attach_secondary(const char *name); + /** * @internal * Release the specified ethdev port. @@ -1777,7 +1775,7 @@ struct rte_eth_dev *rte_eth_dev_allocate(const char *name); int rte_eth_dev_release_port(struct rte_eth_dev *eth_dev); /** - * Attach a new Ethernet device specified by aruguments. + * Attach a new Ethernet device specified by arguments. * * @param devargs * A pointer to a strings array describing the new device @@ -1804,78 +1802,6 @@ int rte_eth_dev_attach(const char *devargs, uint8_t *port_id); */ int rte_eth_dev_detach(uint8_t port_id, char *devname); -struct eth_driver; -/** - * @internal - * Initialization function of an Ethernet driver invoked for each matching - * Ethernet PCI device detected during the PCI probing phase. - * - * @param eth_dev - * The *eth_dev* pointer is the address of the *rte_eth_dev* structure - * associated with the matching device and which have been [automatically] - * allocated in the *rte_eth_devices* array. - * The *eth_dev* structure is supplied to the driver initialization function - * with the following fields already initialized: - * - * - *pci_dev*: Holds the pointers to the *rte_pci_device* structure which - * contains the generic PCI information of the matching device. - * - * - *driver*: Holds the pointer to the *eth_driver* structure. - * - * - *dev_private*: Holds a pointer to the device private data structure. - * - * - *mtu*: Contains the default Ethernet maximum frame length (1500). - * - * - *port_id*: Contains the port index of the device (actually the index - * of the *eth_dev* structure in the *rte_eth_devices* array). - * - * @return - * - 0: Success, the device is properly initialized by the driver. - * In particular, the driver MUST have set up the *dev_ops* pointer - * of the *eth_dev* structure. - * - <0: Error code of the device initialization failure. - */ -typedef int (*eth_dev_init_t)(struct rte_eth_dev *eth_dev); - -/** - * @internal - * Finalization function of an Ethernet driver invoked for each matching - * Ethernet PCI device detected during the PCI closing phase. - * - * @param eth_dev - * The *eth_dev* pointer is the address of the *rte_eth_dev* structure - * associated with the matching device and which have been [automatically] - * allocated in the *rte_eth_devices* array. - * @return - * - 0: Success, the device is properly finalized by the driver. - * In particular, the driver MUST free the *dev_ops* pointer - * of the *eth_dev* structure. - * - <0: Error code of the device initialization failure. - */ -typedef int (*eth_dev_uninit_t)(struct rte_eth_dev *eth_dev); - -/** - * @internal - * The structure associated with a PMD Ethernet driver. - * - * Each Ethernet driver acts as a PCI driver and is represented by a generic - * *eth_driver* structure that holds: - * - * - An *rte_pci_driver* structure (which must be the first field). - * - * - The *eth_dev_init* function invoked for each matching PCI device. - * - * - The *eth_dev_uninit* function invoked for each matching PCI device. - * - * - The size of the private data to allocate for each matching device. - */ -struct eth_driver { - struct rte_pci_driver pci_drv; /**< The PMD is also a PCI driver. */ - eth_dev_init_t eth_dev_init; /**< Device init function. */ - eth_dev_uninit_t eth_dev_uninit; /**< Device uninit function. */ - unsigned int dev_private_size; /**< Size of device private data. */ -}; - /** * Convert a numerical speed in Mbps to a bitmap flag that can be used in * the bitmap link_speeds of the struct rte_eth_conf @@ -2309,7 +2235,7 @@ void rte_eth_stats_reset(uint8_t port_id); */ int rte_eth_xstats_get_names(uint8_t port_id, struct rte_eth_xstat_name *xstats_names, - unsigned size); + unsigned int size); /** * Retrieve extended statistics of an Ethernet device. @@ -2334,7 +2260,80 @@ int rte_eth_xstats_get_names(uint8_t port_id, * - A negative value on error (invalid port id). */ int rte_eth_xstats_get(uint8_t port_id, struct rte_eth_xstat *xstats, - unsigned n); + unsigned int n); + +/** + * Retrieve names of extended statistics of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param xstats_names + * An rte_eth_xstat_name array of at least *size* elements to + * be filled. If set to NULL, the function returns the required number + * of elements. + * @param ids + * IDs array given by app to retrieve specific statistics + * @param size + * The size of the xstats_names array (number of elements). + * @return + * - A positive value lower or equal to size: success. The return value + * is the number of entries filled in the stats table. + * - A positive value higher than size: error, the given statistics table + * is too small. The return value corresponds to the size that should + * be given to succeed. The entries in the table are not valid and + * shall not be used by the caller. + * - A negative value on error (invalid port id). + */ +int +rte_eth_xstats_get_names_by_id(uint8_t port_id, + struct rte_eth_xstat_name *xstats_names, unsigned int size, + uint64_t *ids); + +/** + * Retrieve extended statistics of an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param ids + * A pointer to an ids array passed by application. This tells wich + * statistics values function should retrieve. This parameter + * can be set to NULL if n is 0. In this case function will retrieve + * all avalible statistics. + * @param values + * A pointer to a table to be filled with device statistics values. + * @param n + * The size of the ids array (number of elements). + * @return + * - A positive value lower or equal to n: success. The return value + * is the number of entries filled in the stats table. + * - A positive value higher than n: error, the given statistics table + * is too small. The return value corresponds to the size that should + * be given to succeed. The entries in the table are not valid and + * shall not be used by the caller. + * - A negative value on error (invalid port id). + */ +int rte_eth_xstats_get_by_id(uint8_t port_id, const uint64_t *ids, + uint64_t *values, unsigned int n); + +/** + * Gets the ID of a statistic from its name. + * + * This function searches for the statistics using string compares, and + * as such should not be used on the fast-path. For fast-path retrieval of + * specific statistics, store the ID as provided in *id* from this function, + * and pass the ID to rte_eth_xstats_get() + * + * @param port_id The port to look up statistics from + * @param xstat_name The name of the statistic to return + * @param[out] id A pointer to an app-supplied uint64_t which should be + * set to the ID of the stat if the stat exists. + * @return + * 0 on success + * -ENODEV for invalid port_id, + * -EINVAL if the xstat_name doesn't exist in port_id + */ +int rte_eth_xstats_get_id_by_name(uint8_t port_id, const char *xstat_name, + uint64_t *id); /** * Reset extended statistics of an Ethernet device. @@ -2457,7 +2456,7 @@ int rte_eth_dev_fw_version_get(uint8_t port_id, * @param ptype_mask * A hint of what kind of packet type which the caller is interested in. * @param ptypes - * An array pointer to store adequent packet types, allocated by caller. + * An array pointer to store adequate packet types, allocated by caller. * @param num * Size of the array pointed by param ptypes. * @return @@ -2597,12 +2596,12 @@ int rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask); int rte_eth_dev_get_vlan_offload(uint8_t port_id); /** - * Set port based TX VLAN insersion on or off. + * Set port based TX VLAN insertion on or off. * * @param port_id * The port identifier of the Ethernet device. * @param pvid - * Port based TX VLAN identifier togeth with user priority. + * Port based TX VLAN identifier together with user priority. * @param on * Turn on or off the port based TX VLAN insertion. * @@ -2659,7 +2658,7 @@ int rte_eth_dev_set_vlan_pvid(uint8_t port_id, uint16_t pvid, int on); * method to retrieve bursts of received packets and to immediately * queue them for further parallel processing by another logical core, * for instance. However, instead of having received packets being - * individually queued by the driver, this approach allows the invoker + * individually queued by the driver, this approach allows the caller * of the rte_eth_rx_burst() function to queue a burst of retrieved * packets at a time and therefore dramatically reduce the cost of * enqueue/dequeue operations per packet. @@ -2778,6 +2777,121 @@ rte_eth_rx_descriptor_done(uint8_t port_id, uint16_t queue_id, uint16_t offset) dev->data->rx_queues[queue_id], offset); } +#define RTE_ETH_RX_DESC_AVAIL 0 /**< Desc available for hw. */ +#define RTE_ETH_RX_DESC_DONE 1 /**< Desc done, filled by hw. */ +#define RTE_ETH_RX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */ + +/** + * Check the status of a Rx descriptor in the queue + * + * It should be called in a similar context than the Rx function: + * - on a dataplane core + * - not concurrently on the same queue + * + * Since it's a dataplane function, no check is performed on port_id and + * queue_id. The caller must therefore ensure that the port is enabled + * and the queue is configured and running. + * + * Note: accessing to a random descriptor in the ring may trigger cache + * misses and have a performance impact. + * + * @param port_id + * A valid port identifier of the Ethernet device which. + * @param queue_id + * A valid Rx queue identifier on this port. + * @param offset + * The offset of the descriptor starting from tail (0 is the next + * packet to be received by the driver). + * + * @return + * - (RTE_ETH_RX_DESC_AVAIL): Descriptor is available for the hardware to + * receive a packet. + * - (RTE_ETH_RX_DESC_DONE): Descriptor is done, it is filled by hw, but + * not yet processed by the driver (i.e. in the receive queue). + * - (RTE_ETH_RX_DESC_UNAVAIL): Descriptor is unavailable, either hold by + * the driver and not yet returned to hw, or reserved by the hw. + * - (-EINVAL) bad descriptor offset. + * - (-ENOTSUP) if the device does not support this function. + * - (-ENODEV) bad port or queue (only if compiled with debug). + */ +static inline int +rte_eth_rx_descriptor_status(uint8_t port_id, uint16_t queue_id, + uint16_t offset) +{ + struct rte_eth_dev *dev; + void *rxq; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); +#endif + dev = &rte_eth_devices[port_id]; +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + if (queue_id >= dev->data->nb_rx_queues) + return -ENODEV; +#endif + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_descriptor_status, -ENOTSUP); + rxq = dev->data->rx_queues[queue_id]; + + return (*dev->dev_ops->rx_descriptor_status)(rxq, offset); +} + +#define RTE_ETH_TX_DESC_FULL 0 /**< Desc filled for hw, waiting xmit. */ +#define RTE_ETH_TX_DESC_DONE 1 /**< Desc done, packet is transmitted. */ +#define RTE_ETH_TX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */ + +/** + * Check the status of a Tx descriptor in the queue. + * + * It should be called in a similar context than the Tx function: + * - on a dataplane core + * - not concurrently on the same queue + * + * Since it's a dataplane function, no check is performed on port_id and + * queue_id. The caller must therefore ensure that the port is enabled + * and the queue is configured and running. + * + * Note: accessing to a random descriptor in the ring may trigger cache + * misses and have a performance impact. + * + * @param port_id + * A valid port identifier of the Ethernet device which. + * @param queue_id + * A valid Tx queue identifier on this port. + * @param offset + * The offset of the descriptor starting from tail (0 is the place where + * the next packet will be send). + * + * @return + * - (RTE_ETH_TX_DESC_FULL) Descriptor is being processed by the hw, i.e. + * in the transmit queue. + * - (RTE_ETH_TX_DESC_DONE) Hardware is done with this descriptor, it can + * be reused by the driver. + * - (RTE_ETH_TX_DESC_UNAVAIL): Descriptor is unavailable, reserved by the + * driver or the hardware. + * - (-EINVAL) bad descriptor offset. + * - (-ENOTSUP) if the device does not support this function. + * - (-ENODEV) bad port or queue (only if compiled with debug). + */ +static inline int rte_eth_tx_descriptor_status(uint8_t port_id, + uint16_t queue_id, uint16_t offset) +{ + struct rte_eth_dev *dev; + void *txq; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); +#endif + dev = &rte_eth_devices[port_id]; +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + if (queue_id >= dev->data->nb_tx_queues) + return -ENODEV; +#endif + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->tx_descriptor_status, -ENOTSUP); + txq = dev->data->tx_queues[queue_id]; + + return (*dev->dev_ops->tx_descriptor_status)(txq, offset); +} + /** * Send a burst of output packets on a transmit queue of an Ethernet device. * @@ -3089,7 +3203,7 @@ rte_eth_tx_buffer_flush(uint8_t port_id, uint16_t queue_id, * causing N packets to be sent, and the error callback to be called for * the rest. */ -static inline uint16_t __attribute__((always_inline)) +static __rte_always_inline uint16_t rte_eth_tx_buffer(uint8_t port_id, uint16_t queue_id, struct rte_eth_dev_tx_buffer *buffer, struct rte_mbuf *tx_pkt) { @@ -3220,6 +3334,7 @@ enum rte_eth_event_type { /**< reset interrupt event, sent to VF on PF reset */ RTE_ETH_EVENT_VF_MBOX, /**< message from the VF received by PF */ RTE_ETH_EVENT_MACSEC, /**< MACsec offload related event */ + RTE_ETH_EVENT_INTR_RMV, /**< device removal event */ RTE_ETH_EVENT_MAX /**< max value of this enum */ }; @@ -3298,7 +3413,7 @@ void _rte_eth_dev_callback_process(struct rte_eth_dev *dev, /** * When there is no rx packet coming in Rx Queue for a long time, we can * sleep lcore related to RX Queue for power saving, and enable rx interrupt - * to be triggered when rx packect arrives. + * to be triggered when Rx packet arrives. * * The rte_eth_dev_rx_intr_enable() function enables rx queue * interrupt on specific rx queue of a port. @@ -3649,171 +3764,6 @@ int rte_eth_mirror_rule_reset(uint8_t port_id, int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx, uint16_t tx_rate); -/** - * Initialize bypass logic. This function needs to be called before - * executing any other bypass API. - * - * @param port - * The port identifier of the Ethernet device. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_init(uint8_t port); - -/** - * Return bypass state. - * - * @param port - * The port identifier of the Ethernet device. - * @param state - * The return bypass state. - * - (1) Normal mode - * - (2) Bypass mode - * - (3) Isolate mode - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_state_show(uint8_t port, uint32_t *state); - -/** - * Set bypass state - * - * @param port - * The port identifier of the Ethernet device. - * @param new_state - * The current bypass state. - * - (1) Normal mode - * - (2) Bypass mode - * - (3) Isolate mode - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_state_set(uint8_t port, uint32_t *new_state); - -/** - * Return bypass state when given event occurs. - * - * @param port - * The port identifier of the Ethernet device. - * @param event - * The bypass event - * - (1) Main power on (power button is pushed) - * - (2) Auxiliary power on (power supply is being plugged) - * - (3) Main power off (system shutdown and power supply is left plugged in) - * - (4) Auxiliary power off (power supply is being unplugged) - * - (5) Display or set the watchdog timer - * @param state - * The bypass state when given event occurred. - * - (1) Normal mode - * - (2) Bypass mode - * - (3) Isolate mode - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_event_show(uint8_t port, uint32_t event, uint32_t *state); - -/** - * Set bypass state when given event occurs. - * - * @param port - * The port identifier of the Ethernet device. - * @param event - * The bypass event - * - (1) Main power on (power button is pushed) - * - (2) Auxiliary power on (power supply is being plugged) - * - (3) Main power off (system shutdown and power supply is left plugged in) - * - (4) Auxiliary power off (power supply is being unplugged) - * - (5) Display or set the watchdog timer - * @param state - * The assigned state when given event occurs. - * - (1) Normal mode - * - (2) Bypass mode - * - (3) Isolate mode - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_event_store(uint8_t port, uint32_t event, uint32_t state); - -/** - * Set bypass watchdog timeout count. - * - * @param port - * The port identifier of the Ethernet device. - * @param timeout - * The timeout to be set. - * - (0) 0 seconds (timer is off) - * - (1) 1.5 seconds - * - (2) 2 seconds - * - (3) 3 seconds - * - (4) 4 seconds - * - (5) 8 seconds - * - (6) 16 seconds - * - (7) 32 seconds - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_wd_timeout_store(uint8_t port, uint32_t timeout); - -/** - * Get bypass firmware version. - * - * @param port - * The port identifier of the Ethernet device. - * @param ver - * The firmware version - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_ver_show(uint8_t port, uint32_t *ver); - -/** - * Return bypass watchdog timeout in seconds - * - * @param port - * The port identifier of the Ethernet device. - * @param wd_timeout - * The return watchdog timeout. "0" represents timer expired - * - (0) 0 seconds (timer is off) - * - (1) 1.5 seconds - * - (2) 2 seconds - * - (3) 3 seconds - * - (4) 4 seconds - * - (5) 8 seconds - * - (6) 16 seconds - * - (7) 32 seconds - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout); - -/** - * Reset bypass watchdog timer - * - * @param port - * The port identifier of the Ethernet device. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_bypass_wd_reset(uint8_t port); - /** * Configuration of Receive Side Scaling hash computation of Ethernet device. * @@ -3968,31 +3918,31 @@ int rte_eth_dev_get_dcb_info(uint8_t port_id, void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id, rte_rx_callback_fn fn, void *user_param); -/* -* Add a callback that must be called first on packet RX on a given port -* and queue. -* -* This API configures a first function to be called for each burst of -* packets received on a given NIC port queue. The return value is a pointer -* that can be used to later remove the callback using -* rte_eth_remove_rx_callback(). -* -* Multiple functions are called in the order that they are added. -* -* @param port_id -* The port identifier of the Ethernet device. -* @param queue_id -* The queue on the Ethernet device on which the callback is to be added. -* @param fn -* The callback function -* @param user_param -* A generic pointer parameter which will be passed to each invocation of the -* callback function on this port and queue. -* -* @return -* NULL on error. -* On success, a pointer value which can later be used to remove the callback. -*/ +/** + * Add a callback that must be called first on packet RX on a given port + * and queue. + * + * This API configures a first function to be called for each burst of + * packets received on a given NIC port queue. The return value is a pointer + * that can be used to later remove the callback using + * rte_eth_remove_rx_callback(). + * + * Multiple functions are called in the order that they are added. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param queue_id + * The queue on the Ethernet device on which the callback is to be added. + * @param fn + * The callback function + * @param user_param + * A generic pointer parameter which will be passed to each invocation of the + * callback function on this port and queue. + * + * @return + * NULL on error. + * On success, a pointer value which can later be used to remove the callback. + */ void *rte_eth_add_first_rx_callback(uint8_t port_id, uint16_t queue_id, rte_rx_callback_fn fn, void *user_param); @@ -4329,20 +4279,6 @@ int rte_eth_timesync_read_time(uint8_t port_id, struct timespec *time); */ int rte_eth_timesync_write_time(uint8_t port_id, const struct timespec *time); -/** - * Copy pci device info to the Ethernet device data. - * - * @param eth_dev - * The *eth_dev* pointer is the address of the *rte_eth_dev* structure. - * @param pci_dev - * The *pci_dev* pointer is the address of the *rte_pci_device* structure. - * - * @return - * - 0 on success, negative on error - */ -void rte_eth_copy_pci_info(struct rte_eth_dev *eth_dev, - struct rte_pci_device *pci_dev); - /** * Create memzone for HW rings. * malloc can't be used as the physical address is needed. @@ -4415,7 +4351,7 @@ rte_eth_dev_l2_tunnel_offload_set(uint8_t port_id, uint8_t en); /** -* Get the port id from pci adrress or device name +* Get the port id from pci address or device name * Ex: 0000:2:00.0 or vdev name net_pcap0 * * @param name @@ -4423,7 +4359,7 @@ rte_eth_dev_l2_tunnel_offload_set(uint8_t port_id, * @param port_id * pointer to port identifier of the device * @return -* - (0) if successful. +* - (0) if successful and port_id is filled. * - (-ENODEV or -EINVAL) on failure. */ int @@ -4443,21 +4379,6 @@ rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id); int rte_eth_dev_get_name_by_port(uint8_t port_id, char *name); -/** - * @internal - * Wrapper for use by pci drivers as a .probe function to attach to a ethdev - * interface. - */ -int rte_eth_dev_pci_probe(struct rte_pci_driver *pci_drv, - struct rte_pci_device *pci_dev); - -/** - * @internal - * Wrapper for use by pci drivers as a .remove function to detach a ethdev - * interface. - */ -int rte_eth_dev_pci_remove(struct rte_pci_device *pci_dev); - #ifdef __cplusplus } #endif