X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_ether%2Frte_ethdev.h;h=c17bbda8bcc86cde144a90e36f9bfb60e2080af1;hb=5e823a451261ed1d2277df7ea1436f969f12274e;hp=9cbd1af43fb4ea8d864c57b714a67a29b0c62d10;hpb=7e98b3af9e169870fd635434ceb735bf34e8c432;p=dpdk.git diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index 9cbd1af43f..c17bbda8bc 100644 --- a/lib/librte_ether/rte_ethdev.h +++ b/lib/librte_ether/rte_ethdev.h @@ -1287,39 +1287,11 @@ typedef int (*eth_uc_all_hash_table_set_t)(struct rte_eth_dev *dev, uint8_t on); /**< @internal Set all Unicast Hash bitmap */ -typedef int (*eth_set_vf_rx_mode_t)(struct rte_eth_dev *dev, - uint16_t vf, - uint16_t rx_mode, - uint8_t on); -/**< @internal Set a VF receive mode */ - -typedef int (*eth_set_vf_rx_t)(struct rte_eth_dev *dev, - uint16_t vf, - uint8_t on); -/**< @internal Set a VF receive mode */ - -typedef int (*eth_set_vf_tx_t)(struct rte_eth_dev *dev, - uint16_t vf, - uint8_t on); -/**< @internal Enable or disable a VF transmit */ - -typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev, - uint16_t vlan, - uint64_t vf_mask, - uint8_t vlan_on); -/**< @internal Set VF VLAN pool filter */ - typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev, uint16_t queue_idx, uint16_t tx_rate); /**< @internal Set queue TX rate */ -typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev, - uint16_t vf, - uint16_t tx_rate, - uint64_t q_msk); -/**< @internal Set VF TX rate */ - typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev, struct rte_eth_mirror_conf *mirror_conf, uint8_t rule_id, @@ -1529,12 +1501,6 @@ struct eth_dev_ops { eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule. */ eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule. */ - eth_set_vf_rx_mode_t set_vf_rx_mode;/**< Set VF RX mode. */ - eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive. */ - eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit. */ - eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter. */ - eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit. */ - eth_udp_tunnel_port_add_t udp_tunnel_port_add; /** Add UDP tunnel port. */ eth_udp_tunnel_port_del_t udp_tunnel_port_del; /** Del UDP tunnel port. */ eth_l2_tunnel_eth_type_conf_t l2_tunnel_eth_type_conf; @@ -3586,93 +3552,6 @@ int rte_eth_dev_uc_hash_table_set(uint8_t port,struct ether_addr *addr, */ int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on); - /** - * Set RX L2 Filtering mode of a VF of an Ethernet device. - * - * @param port - * The port identifier of the Ethernet device. - * @param vf - * VF id. - * @param rx_mode - * The RX mode mask, which is one or more of accepting Untagged Packets, - * packets that match the PFUTA table, Broadcast and Multicast Promiscuous. - * ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC, - * ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used - * in rx_mode. - * @param on - * 1 - Enable a VF RX mode. - * 0 - Disable a VF RX mode. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mode, - uint8_t on); - -/** -* Enable or disable a VF traffic transmit of the Ethernet device. -* -* @param port -* The port identifier of the Ethernet device. -* @param vf -* VF id. -* @param on -* 1 - Enable a VF traffic transmit. -* 0 - Disable a VF traffic transmit. -* @return -* - (0) if successful. -* - (-ENODEV) if *port_id* invalid. -* - (-ENOTSUP) if hardware doesn't support. -* - (-EINVAL) if bad parameter. -*/ -int -rte_eth_dev_set_vf_tx(uint8_t port,uint16_t vf, uint8_t on); - -/** -* Enable or disable a VF traffic receive of an Ethernet device. -* -* @param port -* The port identifier of the Ethernet device. -* @param vf -* VF id. -* @param on -* 1 - Enable a VF traffic receive. -* 0 - Disable a VF traffic receive. -* @return -* - (0) if successful. -* - (-ENOTSUP) if hardware doesn't support. -* - (-ENODEV) if *port_id* invalid. -* - (-EINVAL) if bad parameter. -*/ -int -rte_eth_dev_set_vf_rx(uint8_t port,uint16_t vf, uint8_t on); - -/** -* Enable/Disable hardware VF VLAN filtering by an Ethernet device of -* received VLAN packets tagged with a given VLAN Tag Identifier. -* -* @param port id -* The port identifier of the Ethernet device. -* @param vlan_id -* The VLAN Tag Identifier whose filtering must be enabled or disabled. -* @param vf_mask -* Bitmap listing which VFs participate in the VLAN filtering. -* @param vlan_on -* 1 - Enable VFs VLAN filtering. -* 0 - Disable VFs VLAN filtering. -* @return -* - (0) if successful. -* - (-ENOTSUP) if hardware doesn't support. -* - (-ENODEV) if *port_id* invalid. -* - (-EINVAL) if bad parameter. -*/ -int -rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id, - uint64_t vf_mask, - uint8_t vlan_on); - /** * Set a traffic mirroring rule on an Ethernet device * @@ -3733,26 +3612,6 @@ int rte_eth_mirror_rule_reset(uint8_t port_id, int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx, uint16_t tx_rate); -/** - * Set the rate limitation for a vf on an Ethernet device. - * - * @param port_id - * The port identifier of the Ethernet device. - * @param vf - * VF id. - * @param tx_rate - * The tx rate allocated from the total link speed for this VF id. - * @param q_msk - * The queue mask which need to set the rate. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support this feature. - * - (-ENODEV) if *port_id* invalid. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf, - uint16_t tx_rate, uint64_t q_msk); - /** * Initialize bypass logic. This function needs to be called before * executing any other bypass API.