X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_hash%2Frte_hash.h;h=ed0673b73b6216995ac1f4e1db8a589efea3627b;hb=19d4c1aee898d5db13f8a73f681efa035cf7764f;hp=936d170f0f71a53831d1b5e01355da2aebc8b031;hpb=48a399119619fefc9d68fcc3f8d98adc33913fa2;p=dpdk.git diff --git a/lib/librte_hash/rte_hash.h b/lib/librte_hash/rte_hash.h index 936d170f0f..ed0673b73b 100644 --- a/lib/librte_hash/rte_hash.h +++ b/lib/librte_hash/rte_hash.h @@ -1,34 +1,5 @@ -/*- - * BSD LICENSE - * - * Copyright(c) 2010-2015 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(c) 2010-2015 Intel Corporation */ #ifndef _RTE_HASH_H_ @@ -41,6 +12,9 @@ */ #include +#include + +#include #ifdef __cplusplus extern "C" { @@ -49,12 +23,6 @@ extern "C" { /** Maximum size of hash table that can be created. */ #define RTE_HASH_ENTRIES_MAX (1 << 30) -/** @deprecated Maximum bucket size that can be created. */ -#define RTE_HASH_BUCKET_ENTRIES_MAX 4 - -/** @deprecated Maximum length of key that can be used. */ -#define RTE_HASH_KEY_LENGTH_MAX 64 - /** Maximum number of characters in hash name.*/ #define RTE_HASH_NAMESIZE 32 @@ -62,30 +30,60 @@ extern "C" { #define RTE_HASH_LOOKUP_BULK_MAX 64 #define RTE_HASH_LOOKUP_MULTI_MAX RTE_HASH_LOOKUP_BULK_MAX -/** Signature of key that is stored internally. */ +/** Enable Hardware transactional memory support. */ +#define RTE_HASH_EXTRA_FLAGS_TRANS_MEM_SUPPORT 0x01 + +/** Default behavior of insertion, single writer/multi writer */ +#define RTE_HASH_EXTRA_FLAGS_MULTI_WRITER_ADD 0x02 + +/** Flag to support reader writer concurrency */ +#define RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY 0x04 + +/** Flag to indicate the extendable bucket table feature should be used */ +#define RTE_HASH_EXTRA_FLAGS_EXT_TABLE 0x08 + +/** Flag to disable freeing of key index on hash delete. + * Refer to rte_hash_del_xxx APIs for more details. + * This is enabled by default when RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF + * is enabled. + */ +#define RTE_HASH_EXTRA_FLAGS_NO_FREE_ON_DEL 0x10 + +/** Flag to support lock free reader writer concurrency. Both single writer + * and multi writer use cases are supported. + */ +#define RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF 0x20 + +/** + * The type of hash value of a key. + * It should be a value of at least 32bit with fully random pattern. + */ typedef uint32_t hash_sig_t; /** Type of function that can be used for calculating the hash value. */ typedef uint32_t (*rte_hash_function)(const void *key, uint32_t key_len, uint32_t init_val); +/** Type of function used to compare the hash key. */ +typedef int (*rte_hash_cmp_eq_t)(const void *key1, const void *key2, size_t key_len); + /** * Parameters used when creating the hash table. */ struct rte_hash_parameters { const char *name; /**< Name of the hash. */ uint32_t entries; /**< Total hash table entries. */ - uint32_t bucket_entries; /**< Bucket entries. */ + uint32_t reserved; /**< Unused field. Should be set to 0 */ uint32_t key_len; /**< Length of hash key. */ rte_hash_function hash_func; /**< Primary Hash function used to calculate hash. */ uint32_t hash_func_init_val; /**< Init value used by hash_func. */ int socket_id; /**< NUMA Socket ID for memory. */ + uint8_t extra_flag; /**< Indicate if additional parameters are present. */ }; /** @internal A hash table structure. */ struct rte_hash; - /** * Create a new hash table. * @@ -106,6 +104,19 @@ struct rte_hash; struct rte_hash * rte_hash_create(const struct rte_hash_parameters *params); +/** + * Set a new hash compare function other than the default one. + * + * @note Function pointer does not work with multi-process, so do not use it + * in multi-process mode. + * + * @param h + * Hash table for which the function is to be changed + * @param func + * New compare function + */ +void rte_hash_set_cmp_func(struct rte_hash *h, rte_hash_cmp_eq_t func); + /** * Find an existing hash table object and return a pointer to it. * @@ -128,9 +139,107 @@ void rte_hash_free(struct rte_hash *h); /** - * Add a key to an existing hash table. + * Reset all hash structure, by zeroing all entries. + * When RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF is enabled, + * it is application's responsibility to make sure that + * none of the readers are referencing the hash table + * while calling this API. + * + * @param h + * Hash table to reset + */ +void +rte_hash_reset(struct rte_hash *h); + +/** + * Return the number of keys in the hash table + * @param h + * Hash table to query from + * @return + * - -EINVAL if parameters are invalid + * - A value indicating how many keys were inserted in the table. + */ +int32_t +rte_hash_count(const struct rte_hash *h); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice + * + * Return the maximum key value ID that could possibly be returned by + * rte_hash_add_key function. + * + * @param h + * Hash table to query from + * @return + * - -EINVAL if parameters are invalid + * - A value indicating the max key ID of key slots present in the table. + */ +__rte_experimental +int32_t +rte_hash_max_key_id(const struct rte_hash *h); + +/** + * Add a key-value pair to an existing hash table. + * This operation is not multi-thread safe + * and should only be called from one thread by default. + * Thread safety can be enabled by setting flag during + * table creation. + * If the key exists already in the table, this API updates its value + * with 'data' passed in this API. It is the responsibility of + * the application to manage any memory associated with the old value. + * The readers might still be using the old value even after this API + * has returned. + * + * @param h + * Hash table to add the key to. + * @param key + * Key to add to the hash table. + * @param data + * Data to add to the hash table. + * @return + * - 0 if added successfully + * - -EINVAL if the parameters are invalid. + * - -ENOSPC if there is no space in the hash for this key. + */ +int +rte_hash_add_key_data(const struct rte_hash *h, const void *key, void *data); + +/** + * Add a key-value pair with a pre-computed hash value + * to an existing hash table. * This operation is not multi-thread safe - * and should only be called from one thread. + * and should only be called from one thread by default. + * Thread safety can be enabled by setting flag during + * table creation. + * If the key exists already in the table, this API updates its value + * with 'data' passed in this API. It is the responsibility of + * the application to manage any memory associated with the old value. + * The readers might still be using the old value even after this API + * has returned. + * + * @param h + * Hash table to add the key to. + * @param key + * Key to add to the hash table. + * @param sig + * Precomputed hash value for 'key' + * @param data + * Data to add to the hash table. + * @return + * - 0 if added successfully + * - -EINVAL if the parameters are invalid. + * - -ENOSPC if there is no space in the hash for this key. + */ +int32_t +rte_hash_add_key_with_hash_data(const struct rte_hash *h, const void *key, + hash_sig_t sig, void *data); + +/** + * Add a key to an existing hash table. This operation is not multi-thread safe + * and should only be called from one thread by default. + * Thread safety can be enabled by setting flag during + * table creation. * * @param h * Hash table to add the key to. @@ -140,7 +249,9 @@ rte_hash_free(struct rte_hash *h); * - -EINVAL if the parameters are invalid. * - -ENOSPC if there is no space in the hash for this key. * - A positive value that can be used by the caller as an offset into an - * array of user data. This value is unique for this key. + * array of user data. This value is unique for this key. This + * unique key id may be larger than the user specified entry count + * when RTE_HASH_EXTRA_FLAGS_MULTI_WRITER_ADD flag is set. */ int32_t rte_hash_add_key(const struct rte_hash *h, const void *key); @@ -148,7 +259,9 @@ rte_hash_add_key(const struct rte_hash *h, const void *key); /** * Add a key to an existing hash table. * This operation is not multi-thread safe - * and should only be called from one thread. + * and should only be called from one thread by default. + * Thread safety can be enabled by setting flag during + * table creation. * * @param h * Hash table to add the key to. @@ -160,7 +273,9 @@ rte_hash_add_key(const struct rte_hash *h, const void *key); * - -EINVAL if the parameters are invalid. * - -ENOSPC if there is no space in the hash for this key. * - A positive value that can be used by the caller as an offset into an - * array of user data. This value is unique for this key. + * array of user data. This value is unique for this key. This + * unique key ID may be larger than the user specified entry count + * when RTE_HASH_EXTRA_FLAGS_MULTI_WRITER_ADD flag is set. */ int32_t rte_hash_add_key_with_hash(const struct rte_hash *h, const void *key, hash_sig_t sig); @@ -168,7 +283,17 @@ rte_hash_add_key_with_hash(const struct rte_hash *h, const void *key, hash_sig_t /** * Remove a key from an existing hash table. * This operation is not multi-thread safe - * and should only be called from one thread. + * and should only be called from one thread by default. + * Thread safety can be enabled by setting flag during + * table creation. + * If RTE_HASH_EXTRA_FLAGS_NO_FREE_ON_DEL or + * RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF is enabled, + * the key index returned by rte_hash_add_key_xxx APIs will not be + * freed by this API. rte_hash_free_key_with_position API must be called + * additionally to free the index associated with the key. + * rte_hash_free_key_with_position API should be called after all + * the readers have stopped referencing the entry corresponding to + * this key. RCU mechanisms could be used to determine such a state. * * @param h * Hash table to remove the key from. @@ -187,7 +312,17 @@ rte_hash_del_key(const struct rte_hash *h, const void *key); /** * Remove a key from an existing hash table. * This operation is not multi-thread safe - * and should only be called from one thread. + * and should only be called from one thread by default. + * Thread safety can be enabled by setting flag during + * table creation. + * If RTE_HASH_EXTRA_FLAGS_NO_FREE_ON_DEL or + * RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF is enabled, + * the key index returned by rte_hash_add_key_xxx APIs will not be + * freed by this API. rte_hash_free_key_with_position API must be called + * additionally to free the index associated with the key. + * rte_hash_free_key_with_position API should be called after all + * the readers have stopped referencing the entry corresponding to + * this key. RCU mechanisms could be used to determine such a state. * * @param h * Hash table to remove the key from. @@ -205,9 +340,109 @@ rte_hash_del_key(const struct rte_hash *h, const void *key); int32_t rte_hash_del_key_with_hash(const struct rte_hash *h, const void *key, hash_sig_t sig); +/** + * Find a key in the hash table given the position. + * This operation is multi-thread safe with regarding to other lookup threads. + * Read-write concurrency can be enabled by setting flag during + * table creation. + * + * @param h + * Hash table to get the key from. + * @param position + * Position returned when the key was inserted. + * @param key + * Output containing a pointer to the key + * @return + * - 0 if retrieved successfully + * - -EINVAL if the parameters are invalid. + * - -ENOENT if no valid key is found in the given position. + */ +int +rte_hash_get_key_with_position(const struct rte_hash *h, const int32_t position, + void **key); + +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice + * + * Free a hash key in the hash table given the position + * of the key. This operation is not multi-thread safe and should + * only be called from one thread by default. Thread safety + * can be enabled by setting flag during table creation. + * If RTE_HASH_EXTRA_FLAGS_NO_FREE_ON_DEL or + * RTE_HASH_EXTRA_FLAGS_RW_CONCURRENCY_LF is enabled, + * the key index returned by rte_hash_del_key_xxx APIs must be freed + * using this API. This API should be called after all the readers + * have stopped referencing the entry corresponding to this key. + * RCU mechanisms could be used to determine such a state. + * This API does not validate if the key is already freed. + * + * @param h + * Hash table to free the key from. + * @param position + * Position returned when the key was deleted. + * @return + * - 0 if freed successfully + * - -EINVAL if the parameters are invalid. + */ +__rte_experimental +int +rte_hash_free_key_with_position(const struct rte_hash *h, + const int32_t position); + +/** + * Find a key-value pair in the hash table. + * This operation is multi-thread safe with regarding to other lookup threads. + * Read-write concurrency can be enabled by setting flag during + * table creation. + * + * @param h + * Hash table to look in. + * @param key + * Key to find. + * @param data + * Output with pointer to data returned from the hash table. + * @return + * - A positive value that can be used by the caller as an offset into an + * array of user data. This value is unique for this key, and is the same + * value that was returned when the key was added. + * - -EINVAL if the parameters are invalid. + * - -ENOENT if the key is not found. + */ +int +rte_hash_lookup_data(const struct rte_hash *h, const void *key, void **data); + +/** + * Find a key-value pair with a pre-computed hash value + * to an existing hash table. + * This operation is multi-thread safe with regarding to other lookup threads. + * Read-write concurrency can be enabled by setting flag during + * table creation. + * + * @param h + * Hash table to look in. + * @param key + * Key to find. + * @param sig + * Precomputed hash value for 'key' + * @param data + * Output with pointer to data returned from the hash table. + * @return + * - A positive value that can be used by the caller as an offset into an + * array of user data. This value is unique for this key, and is the same + * value that was returned when the key was added. + * - -EINVAL if the parameters are invalid. + * - -ENOENT if the key is not found. + */ +int +rte_hash_lookup_with_hash_data(const struct rte_hash *h, const void *key, + hash_sig_t sig, void **data); + /** * Find a key in the hash table. - * This operation is multi-thread safe. + * This operation is multi-thread safe with regarding to other lookup threads. + * Read-write concurrency can be enabled by setting flag during + * table creation. * * @param h * Hash table to look in. @@ -225,14 +460,16 @@ rte_hash_lookup(const struct rte_hash *h, const void *key); /** * Find a key in the hash table. - * This operation is multi-thread safe. + * This operation is multi-thread safe with regarding to other lookup threads. + * Read-write concurrency can be enabled by setting flag during + * table creation. * * @param h * Hash table to look in. * @param key * Key to find. * @param sig - * Hash value to remove from the hash table. + * Precomputed hash value for 'key'. * @return * - -EINVAL if the parameters are invalid. * - -ENOENT if the key is not found. @@ -246,7 +483,7 @@ rte_hash_lookup_with_hash(const struct rte_hash *h, /** * Calc a hash value by key. - * This operation is not multi-thread safe. + * This operation is not multi-process safe. * * @param h * Hash table to look in. @@ -258,10 +495,34 @@ rte_hash_lookup_with_hash(const struct rte_hash *h, hash_sig_t rte_hash_hash(const struct rte_hash *h, const void *key); -#define rte_hash_lookup_multi rte_hash_lookup_bulk /** * Find multiple keys in the hash table. - * This operation is multi-thread safe. + * This operation is multi-thread safe with regarding to other lookup threads. + * Read-write concurrency can be enabled by setting flag during + * table creation. + * + * @param h + * Hash table to look in. + * @param keys + * A pointer to a list of keys to look for. + * @param num_keys + * How many keys are in the keys list (less than RTE_HASH_LOOKUP_BULK_MAX). + * @param hit_mask + * Output containing a bitmask with all successful lookups. + * @param data + * Output containing array of data returned from all the successful lookups. + * @return + * -EINVAL if there's an error, otherwise number of successful lookups. + */ +int +rte_hash_lookup_bulk_data(const struct rte_hash *h, const void **keys, + uint32_t num_keys, uint64_t *hit_mask, void *data[]); + +/** + * Find multiple keys in the hash table. + * This operation is multi-thread safe with regarding to other lookup threads. + * Read-write concurrency can be enabled by setting flag during + * table creation. * * @param h * Hash table to look in. @@ -282,6 +543,27 @@ int rte_hash_lookup_bulk(const struct rte_hash *h, const void **keys, uint32_t num_keys, int32_t *positions); +/** + * Iterate through the hash table, returning key-value pairs. + * + * @param h + * Hash table to iterate + * @param key + * Output containing the key where current iterator + * was pointing at + * @param data + * Output containing the data associated with key. + * Returns NULL if data was not stored. + * @param next + * Pointer to iterator. Should be 0 to start iterating the hash table. + * Iterator is incremented after each call of this function. + * @return + * Position where key was stored, if successful. + * - -EINVAL if the parameters are invalid. + * - -ENOENT if end of the hash table. + */ +int32_t +rte_hash_iterate(const struct rte_hash *h, const void **key, void **data, uint32_t *next); #ifdef __cplusplus } #endif