X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_mbuf%2Frte_mbuf.h;h=002e86bc8a65870afd6c794ea462dee01fb70b20;hb=63c0d74daaa9a807fbca8a3e363bbe41d6fb715f;hp=8798c41f48f7cbf45f08a6c790ee5fec668c5f92;hpb=b37b528d957c3c37744c430838faa93fb458b206;p=dpdk.git

diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index 8798c41f48..002e86bc8a 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -93,10 +93,6 @@ extern "C" {
 #define PKT_RX_L4_CKSUM_BAD  (1ULL << 3)  /**< L4 cksum of RX pkt. is not OK. */
 #define PKT_RX_IP_CKSUM_BAD  (1ULL << 4)  /**< IP cksum of RX pkt. is not OK. */
 #define PKT_RX_EIP_CKSUM_BAD (1ULL << 5)  /**< External IP header checksum error. */
-#define PKT_RX_OVERSIZE      (0ULL << 0)  /**< Num of desc of an RX pkt oversize. */
-#define PKT_RX_HBUF_OVERFLOW (0ULL << 0)  /**< Header buffer overflow. */
-#define PKT_RX_RECIP_ERR     (0ULL << 0)  /**< Hardware processing error. */
-#define PKT_RX_MAC_ERR       (0ULL << 0)  /**< MAC error. */
 
 /**
  * A vlan has been stripped by the hardware and its tci is saved in
@@ -132,6 +128,18 @@ extern "C" {
 
 /* add new TX flags here */
 
+/**
+ * Bits 45:48 used for the tunnel type.
+ * When doing Tx offload like TSO or checksum, the HW needs to configure the
+ * tunnel type into the HW descriptors.
+ */
+#define PKT_TX_TUNNEL_VXLAN   (0x1ULL << 45)
+#define PKT_TX_TUNNEL_GRE     (0x2ULL << 45)
+#define PKT_TX_TUNNEL_IPIP    (0x3ULL << 45)
+#define PKT_TX_TUNNEL_GENEVE  (0x4ULL << 45)
+/* add new TX TUNNEL type here */
+#define PKT_TX_TUNNEL_MASK    (0xFULL << 45)
+
 /**
  * Second VLAN insertion (QinQ) flag.
  */
@@ -307,6 +315,13 @@ extern "C" {
  * <'ether type'=0x88CC>
  */
 #define RTE_PTYPE_L2_ETHER_LLDP             0x00000004
+/**
+ * NSH (Network Service Header) packet type.
+ *
+ * Packet format:
+ * <'ether type'=0x894F>
+ */
+#define RTE_PTYPE_L2_ETHER_NSH              0x00000005
 /**
  * Mask of layer 2 packet types.
  * It is used for outer packet for tunneling cases.
@@ -753,8 +768,11 @@ const char *rte_get_tx_ol_flag_name(uint64_t mask);
 
 /* define a set of marker types that can be used to refer to set points in the
  * mbuf */
+__extension__
 typedef void    *MARKER[0];   /**< generic marker for a point in a structure */
+__extension__
 typedef uint8_t  MARKER8[0];  /**< generic marker with 1B alignment */
+__extension__
 typedef uint64_t MARKER64[0]; /**< marker that allows us to overwrite 8 bytes
                                * with a single assignment */
 
@@ -781,6 +799,7 @@ struct rte_mbuf {
 	 * or non-atomic) is controlled by the CONFIG_RTE_MBUF_REFCNT_ATOMIC
 	 * config option.
 	 */
+	RTE_STD_C11
 	union {
 		rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
 		uint16_t refcnt;              /**< Non-atomically accessed refcnt */
@@ -800,6 +819,7 @@ struct rte_mbuf {
 	 * would have RTE_PTYPE_L2_ETHER and not RTE_PTYPE_L2_VLAN because the
 	 * vlan is stripped from the data.
 	 */
+	RTE_STD_C11
 	union {
 		uint32_t packet_type; /**< L2/L3/L4 and tunnel information. */
 		struct {
@@ -821,6 +841,7 @@ struct rte_mbuf {
 	union {
 		uint32_t rss;     /**< RSS hash result if RSS enabled */
 		struct {
+			RTE_STD_C11
 			union {
 				struct {
 					uint16_t hash;
@@ -848,6 +869,7 @@ struct rte_mbuf {
 	/* second cache line - fields only used in slow path or on TX */
 	MARKER cacheline1 __rte_cache_min_aligned;
 
+	RTE_STD_C11
 	union {
 		void *userdata;   /**< Can be used for external metadata */
 		uint64_t udata64; /**< Allow 8-byte userdata on 32-bit */
@@ -857,10 +879,15 @@ struct rte_mbuf {
 	struct rte_mbuf *next;    /**< Next segment of scattered packet. */
 
 	/* fields to support TX offloads */
+	RTE_STD_C11
 	union {
 		uint64_t tx_offload;       /**< combined for easy fetch */
+		__extension__
 		struct {
-			uint64_t l2_len:7; /**< L2 (MAC) Header Length. */
+			uint64_t l2_len:7;
+			/**< L2 (MAC) Header Length for non-tunneling pkt.
+			 * Outer_L4_len + ... + Inner_L2_len for tunneling pkt.
+			 */
 			uint64_t l3_len:9; /**< L3 (IP) Header Length. */
 			uint64_t l4_len:8; /**< L4 (TCP/UDP) Header Length. */
 			uint64_t tso_segsz:16; /**< TCP TSO segment size */
@@ -1154,13 +1181,6 @@ static inline struct rte_mbuf *rte_mbuf_raw_alloc(struct rte_mempool *mp)
 	return m;
 }
 
-/* compat with older versions */
-__rte_deprecated static inline struct rte_mbuf *
-__rte_mbuf_raw_alloc(struct rte_mempool *mp)
-{
-	return rte_mbuf_raw_alloc(mp);
-}
-
 /**
  * @internal Put mbuf back into its original mempool.
  * The use of that function is reserved for RTE internal needs.
@@ -1381,6 +1401,19 @@ rte_pktmbuf_priv_size(struct rte_mempool *mp)
 	return mbp_priv->mbuf_priv_size;
 }
 
+/**
+ * Reset the data_off field of a packet mbuf to its default value.
+ *
+ * The given mbuf must have only one segment, which should be empty.
+ *
+ * @param m
+ *   The packet mbuf's data_off field has to be reset.
+ */
+static inline void rte_pktmbuf_reset_headroom(struct rte_mbuf *m)
+{
+	m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+}
+
 /**
  * Reset the fields of a packet mbuf to their default values.
  *
@@ -1401,8 +1434,7 @@ static inline void rte_pktmbuf_reset(struct rte_mbuf *m)
 
 	m->ol_flags = 0;
 	m->packet_type = 0;
-	m->data_off = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
-			RTE_PKTMBUF_HEADROOM : m->buf_len;
+	rte_pktmbuf_reset_headroom(m);
 
 	m->data_len = 0;
 	__rte_mbuf_sanity_check(m, 1);
@@ -1566,7 +1598,7 @@ static inline void rte_pktmbuf_detach(struct rte_mbuf *m)
 	m->buf_addr = (char *)m + mbuf_size;
 	m->buf_physaddr = rte_mempool_virt2phy(mp, m) + mbuf_size;
 	m->buf_len = (uint16_t)buf_len;
-	m->data_off = RTE_MIN(RTE_PKTMBUF_HEADROOM, (uint16_t)m->buf_len);
+	rte_pktmbuf_reset_headroom(m);
 	m->data_len = 0;
 	m->ol_flags = 0;