X-Git-Url: http://git.droids-corp.org/?a=blobdiff_plain;f=lib%2Flibrte_pmd_e1000%2Fe1000%2Fe1000_phy.c;h=cc454d9d807bb1bd33dd4eb127ad90625202da7e;hb=ca5834b7af11ef98060086cb576817800d70e1a9;hp=381bafc431008937a5f2e8fc662f1173f190d87e;hpb=98cd57841bedf1b1da0a365284ecad586a770a5d;p=dpdk.git diff --git a/lib/librte_pmd_e1000/e1000/e1000_phy.c b/lib/librte_pmd_e1000/e1000/e1000_phy.c index 381bafc431..cc454d9d80 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_phy.c +++ b/lib/librte_pmd_e1000/e1000/e1000_phy.c @@ -33,14 +33,19 @@ POSSIBILITY OF SUCH DAMAGE. #include "e1000_api.h" -static s32 e1000_copper_link_autoneg(struct e1000_hw *hw); -static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw); +static s32 e1000_wait_autoneg(struct e1000_hw *hw); +STATIC s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, + u16 *data, bool read, bool page_set); +STATIC u32 e1000_get_phy_addr_for_hv_page(u32 page); +STATIC s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, + u16 *data, bool read); + /* Cable length tables */ static const u16 e1000_m88_cable_length_table[] = { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; #define M88E1000_CABLE_LENGTH_TABLE_SIZE \ - (sizeof(e1000_m88_cable_length_table) / \ - sizeof(e1000_m88_cable_length_table[0])) + (sizeof(e1000_m88_cable_length_table) / \ + sizeof(e1000_m88_cable_length_table[0])) static const u16 e1000_igp_2_cable_length_table[] = { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3, @@ -52,8 +57,8 @@ static const u16 e1000_igp_2_cable_length_table[] = { 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, 124}; #define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ - (sizeof(e1000_igp_2_cable_length_table) / \ - sizeof(e1000_igp_2_cable_length_table[0])) + (sizeof(e1000_igp_2_cable_length_table) / \ + sizeof(e1000_igp_2_cable_length_table[0])) /** * e1000_init_phy_ops_generic - Initialize PHY function pointers @@ -76,25 +81,45 @@ void e1000_init_phy_ops_generic(struct e1000_hw *hw) phy->ops.get_cfg_done = e1000_null_ops_generic; phy->ops.get_cable_length = e1000_null_ops_generic; phy->ops.get_info = e1000_null_ops_generic; + phy->ops.set_page = e1000_null_set_page; phy->ops.read_reg = e1000_null_read_reg; phy->ops.read_reg_locked = e1000_null_read_reg; + phy->ops.read_reg_page = e1000_null_read_reg; phy->ops.release = e1000_null_phy_generic; phy->ops.reset = e1000_null_ops_generic; phy->ops.set_d0_lplu_state = e1000_null_lplu_state; phy->ops.set_d3_lplu_state = e1000_null_lplu_state; phy->ops.write_reg = e1000_null_write_reg; phy->ops.write_reg_locked = e1000_null_write_reg; + phy->ops.write_reg_page = e1000_null_write_reg; phy->ops.power_up = e1000_null_phy_generic; phy->ops.power_down = e1000_null_phy_generic; + phy->ops.read_i2c_byte = e1000_read_i2c_byte_null; + phy->ops.write_i2c_byte = e1000_write_i2c_byte_null; + phy->ops.cfg_on_link_up = e1000_null_ops_generic; +} + +/** + * e1000_null_set_page - No-op function, return 0 + * @hw: pointer to the HW structure + **/ +s32 e1000_null_set_page(struct e1000_hw E1000_UNUSEDARG *hw, + u16 E1000_UNUSEDARG data) +{ + DEBUGFUNC("e1000_null_set_page"); + UNREFERENCED_2PARAMETER(hw, data); + return E1000_SUCCESS; } /** * e1000_null_read_reg - No-op function, return 0 * @hw: pointer to the HW structure **/ -s32 e1000_null_read_reg(struct e1000_hw *hw, u32 offset, u16 *data) +s32 e1000_null_read_reg(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG *data) { DEBUGFUNC("e1000_null_read_reg"); + UNREFERENCED_3PARAMETER(hw, offset, data); return E1000_SUCCESS; } @@ -102,9 +127,10 @@ s32 e1000_null_read_reg(struct e1000_hw *hw, u32 offset, u16 *data) * e1000_null_phy_generic - No-op function, return void * @hw: pointer to the HW structure **/ -void e1000_null_phy_generic(struct e1000_hw *hw) +void e1000_null_phy_generic(struct e1000_hw E1000_UNUSEDARG *hw) { DEBUGFUNC("e1000_null_phy_generic"); + UNREFERENCED_1PARAMETER(hw); return; } @@ -112,9 +138,11 @@ void e1000_null_phy_generic(struct e1000_hw *hw) * e1000_null_lplu_state - No-op function, return 0 * @hw: pointer to the HW structure **/ -s32 e1000_null_lplu_state(struct e1000_hw *hw, bool active) +s32 e1000_null_lplu_state(struct e1000_hw E1000_UNUSEDARG *hw, + bool E1000_UNUSEDARG active) { DEBUGFUNC("e1000_null_lplu_state"); + UNREFERENCED_2PARAMETER(hw, active); return E1000_SUCCESS; } @@ -122,9 +150,47 @@ s32 e1000_null_lplu_state(struct e1000_hw *hw, bool active) * e1000_null_write_reg - No-op function, return 0 * @hw: pointer to the HW structure **/ -s32 e1000_null_write_reg(struct e1000_hw *hw, u32 offset, u16 data) +s32 e1000_null_write_reg(struct e1000_hw E1000_UNUSEDARG *hw, + u32 E1000_UNUSEDARG offset, u16 E1000_UNUSEDARG data) { DEBUGFUNC("e1000_null_write_reg"); + UNREFERENCED_3PARAMETER(hw, offset, data); + return E1000_SUCCESS; +} + +/** + * e1000_read_i2c_byte_null - No-op function, return 0 + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: data value read + * + **/ +s32 e1000_read_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG byte_offset, + u8 E1000_UNUSEDARG dev_addr, + u8 E1000_UNUSEDARG *data) +{ + DEBUGFUNC("e1000_read_i2c_byte_null"); + UNREFERENCED_4PARAMETER(hw, byte_offset, dev_addr, data); + return E1000_SUCCESS; +} + +/** + * e1000_write_i2c_byte_null - No-op function, return 0 + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @dev_addr: device address + * @data: data value to write + * + **/ +s32 e1000_write_i2c_byte_null(struct e1000_hw E1000_UNUSEDARG *hw, + u8 E1000_UNUSEDARG byte_offset, + u8 E1000_UNUSEDARG dev_addr, + u8 E1000_UNUSEDARG data) +{ + DEBUGFUNC("e1000_write_i2c_byte_null"); + UNREFERENCED_4PARAMETER(hw, byte_offset, dev_addr, data); return E1000_SUCCESS; } @@ -160,27 +226,34 @@ s32 e1000_get_phy_id(struct e1000_hw *hw) struct e1000_phy_info *phy = &hw->phy; s32 ret_val = E1000_SUCCESS; u16 phy_id; + u16 retry_count = 0; DEBUGFUNC("e1000_get_phy_id"); - if (!(phy->ops.read_reg)) - goto out; + if (!phy->ops.read_reg) + return E1000_SUCCESS; - ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id); - if (ret_val) - goto out; + while (retry_count < 2) { + ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id); + if (ret_val) + return ret_val; - phy->id = (u32)(phy_id << 16); - usec_delay(20); - ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id); - if (ret_val) - goto out; + phy->id = (u32)(phy_id << 16); + usec_delay(20); + ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id); + if (ret_val) + return ret_val; - phy->id |= (u32)(phy_id & PHY_REVISION_MASK); - phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); + phy->id |= (u32)(phy_id & PHY_REVISION_MASK); + phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); -out: - return ret_val; + if (phy->id != 0 && phy->id != PHY_REVISION_MASK) + return E1000_SUCCESS; + + retry_count++; + } + + return E1000_SUCCESS; } /** @@ -191,21 +264,18 @@ out: **/ s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw) { - s32 ret_val = E1000_SUCCESS; + s32 ret_val; DEBUGFUNC("e1000_phy_reset_dsp_generic"); - if (!(hw->phy.ops.write_reg)) - goto out; + if (!hw->phy.ops.write_reg) + return E1000_SUCCESS; ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1); if (ret_val) - goto out; - - ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0); + return ret_val; -out: - return ret_val; + return hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0); } /** @@ -221,7 +291,6 @@ s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) { struct e1000_phy_info *phy = &hw->phy; u32 i, mdic = 0; - s32 ret_val = E1000_SUCCESS; DEBUGFUNC("e1000_read_phy_reg_mdic"); @@ -230,42 +299,49 @@ s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) return -E1000_ERR_PARAM; } - /* - * Set up Op-code, Phy Address, and register offset in the MDI + /* Set up Op-code, Phy Address, and register offset in the MDI * Control register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ mdic = ((offset << E1000_MDIC_REG_SHIFT) | - (phy->addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_READ)); + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_READ)); E1000_WRITE_REG(hw, E1000_MDIC, mdic); - /* - * Poll the ready bit to see if the MDI read completed + /* Poll the ready bit to see if the MDI read completed * Increasing the time out as testing showed failures with * the lower time out */ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { - usec_delay(50); + usec_delay_irq(50); mdic = E1000_READ_REG(hw, E1000_MDIC); if (mdic & E1000_MDIC_READY) break; } if (!(mdic & E1000_MDIC_READY)) { DEBUGOUT("MDI Read did not complete\n"); - ret_val = -E1000_ERR_PHY; - goto out; + return -E1000_ERR_PHY; } if (mdic & E1000_MDIC_ERROR) { DEBUGOUT("MDI Error\n"); - ret_val = -E1000_ERR_PHY; - goto out; + return -E1000_ERR_PHY; + } + if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { + DEBUGOUT2("MDI Read offset error - requested %d, returned %d\n", + offset, + (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT); + return -E1000_ERR_PHY; } *data = (u16) mdic; -out: - return ret_val; + /* Allow some time after each MDIC transaction to avoid + * reading duplicate data in the next MDIC transaction. + */ + if (hw->mac.type == e1000_pch2lan) + usec_delay_irq(100); + + return E1000_SUCCESS; } /** @@ -280,7 +356,6 @@ s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) { struct e1000_phy_info *phy = &hw->phy; u32 i, mdic = 0; - s32 ret_val = E1000_SUCCESS; DEBUGFUNC("e1000_write_phy_reg_mdic"); @@ -289,42 +364,49 @@ s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) return -E1000_ERR_PARAM; } - /* - * Set up Op-code, Phy Address, and register offset in the MDI + /* Set up Op-code, Phy Address, and register offset in the MDI * Control register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ mdic = (((u32)data) | - (offset << E1000_MDIC_REG_SHIFT) | - (phy->addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_WRITE)); + (offset << E1000_MDIC_REG_SHIFT) | + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_WRITE)); E1000_WRITE_REG(hw, E1000_MDIC, mdic); - /* - * Poll the ready bit to see if the MDI read completed + /* Poll the ready bit to see if the MDI read completed * Increasing the time out as testing showed failures with * the lower time out */ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) { - usec_delay(50); + usec_delay_irq(50); mdic = E1000_READ_REG(hw, E1000_MDIC); if (mdic & E1000_MDIC_READY) break; } if (!(mdic & E1000_MDIC_READY)) { DEBUGOUT("MDI Write did not complete\n"); - ret_val = -E1000_ERR_PHY; - goto out; + return -E1000_ERR_PHY; } if (mdic & E1000_MDIC_ERROR) { DEBUGOUT("MDI Error\n"); - ret_val = -E1000_ERR_PHY; - goto out; + return -E1000_ERR_PHY; + } + if (((mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT) != offset) { + DEBUGOUT2("MDI Write offset error - requested %d, returned %d\n", + offset, + (mdic & E1000_MDIC_REG_MASK) >> E1000_MDIC_REG_SHIFT); + return -E1000_ERR_PHY; } -out: - return ret_val; + /* Allow some time after each MDIC transaction to avoid + * reading duplicate data in the next MDIC transaction. + */ + if (hw->mac.type == e1000_pch2lan) + usec_delay_irq(100); + + return E1000_SUCCESS; } /** @@ -343,14 +425,13 @@ s32 e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data) DEBUGFUNC("e1000_read_phy_reg_i2c"); - /* - * Set up Op-code, Phy Address, and register address in the I2CCMD + /* Set up Op-code, Phy Address, and register address in the I2CCMD * register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | - (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | - (E1000_I2CCMD_OPCODE_READ)); + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + (E1000_I2CCMD_OPCODE_READ)); E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); @@ -392,18 +473,24 @@ s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data) DEBUGFUNC("e1000_write_phy_reg_i2c"); + /* Prevent overwritting SFP I2C EEPROM which is at A0 address.*/ + if ((hw->phy.addr == 0) || (hw->phy.addr > 7)) { + DEBUGOUT1("PHY I2C Address %d is out of range.\n", + hw->phy.addr); + return -E1000_ERR_CONFIG; + } + /* Swap the data bytes for the I2C interface */ phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00); - /* - * Set up Op-code, Phy Address, and register address in the I2CCMD + /* Set up Op-code, Phy Address, and register address in the I2CCMD * register. The MAC will take care of interfacing with the * PHY to retrieve the desired data. */ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | - (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | - E1000_I2CCMD_OPCODE_WRITE | - phy_data_swapped); + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_WRITE | + phy_data_swapped); E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); @@ -426,6 +513,134 @@ s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data) return E1000_SUCCESS; } +/** + * e1000_read_sfp_data_byte - Reads SFP module data. + * @hw: pointer to the HW structure + * @offset: byte location offset to be read + * @data: read data buffer pointer + * + * Reads one byte from SFP module data stored + * in SFP resided EEPROM memory or SFP diagnostic area. + * Function should be called with + * E1000_I2CCMD_SFP_DATA_ADDR() for SFP module database access + * E1000_I2CCMD_SFP_DIAG_ADDR() for SFP diagnostics parameters + * access + **/ +s32 e1000_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data) +{ + u32 i = 0; + u32 i2ccmd = 0; + u32 data_local = 0; + + DEBUGFUNC("e1000_read_sfp_data_byte"); + + if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) { + DEBUGOUT("I2CCMD command address exceeds upper limit\n"); + return -E1000_ERR_PHY; + } + + /* Set up Op-code, EEPROM Address,in the I2CCMD + * register. The MAC will take care of interfacing with the + * EEPROM to retrieve the desired data. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_READ); + + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + + /* Poll the ready bit to see if the I2C read completed */ + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + data_local = E1000_READ_REG(hw, E1000_I2CCMD); + if (data_local & E1000_I2CCMD_READY) + break; + } + if (!(data_local & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Read did not complete\n"); + return -E1000_ERR_PHY; + } + if (data_local & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + *data = (u8) data_local & 0xFF; + + return E1000_SUCCESS; +} + +/** + * e1000_write_sfp_data_byte - Writes SFP module data. + * @hw: pointer to the HW structure + * @offset: byte location offset to write to + * @data: data to write + * + * Writes one byte to SFP module data stored + * in SFP resided EEPROM memory or SFP diagnostic area. + * Function should be called with + * E1000_I2CCMD_SFP_DATA_ADDR() for SFP module database access + * E1000_I2CCMD_SFP_DIAG_ADDR() for SFP diagnostics parameters + * access + **/ +s32 e1000_write_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 data) +{ + u32 i = 0; + u32 i2ccmd = 0; + u32 data_local = 0; + + DEBUGFUNC("e1000_write_sfp_data_byte"); + + if (offset > E1000_I2CCMD_SFP_DIAG_ADDR(255)) { + DEBUGOUT("I2CCMD command address exceeds upper limit\n"); + return -E1000_ERR_PHY; + } + /* The programming interface is 16 bits wide + * so we need to read the whole word first + * then update appropriate byte lane and write + * the updated word back. + */ + /* Set up Op-code, EEPROM Address,in the I2CCMD + * register. The MAC will take care of interfacing + * with an EEPROM to write the data given. + */ + i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_READ); + /* Set a command to read single word */ + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) { + usec_delay(50); + /* Poll the ready bit to see if lastly + * launched I2C operation completed + */ + i2ccmd = E1000_READ_REG(hw, E1000_I2CCMD); + if (i2ccmd & E1000_I2CCMD_READY) { + /* Check if this is READ or WRITE phase */ + if ((i2ccmd & E1000_I2CCMD_OPCODE_READ) == + E1000_I2CCMD_OPCODE_READ) { + /* Write the selected byte + * lane and update whole word + */ + data_local = i2ccmd & 0xFF00; + data_local |= data; + i2ccmd = ((offset << + E1000_I2CCMD_REG_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_WRITE | data_local); + E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); + } else { + break; + } + } + } + if (!(i2ccmd & E1000_I2CCMD_READY)) { + DEBUGOUT("I2CCMD Write did not complete\n"); + return -E1000_ERR_PHY; + } + if (i2ccmd & E1000_I2CCMD_ERROR) { + DEBUGOUT("I2CCMD Error bit set\n"); + return -E1000_ERR_PHY; + } + return E1000_SUCCESS; +} + /** * e1000_read_phy_reg_m88 - Read m88 PHY register * @hw: pointer to the HW structure @@ -438,23 +653,22 @@ s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data) **/ s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data) { - s32 ret_val = E1000_SUCCESS; + s32 ret_val; DEBUGFUNC("e1000_read_phy_reg_m88"); - if (!(hw->phy.ops.acquire)) - goto out; + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; ret_val = hw->phy.ops.acquire(hw); if (ret_val) - goto out; + return ret_val; ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); + data); hw->phy.ops.release(hw); -out: return ret_val; } @@ -469,26 +683,45 @@ out: **/ s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) { - s32 ret_val = E1000_SUCCESS; + s32 ret_val; DEBUGFUNC("e1000_write_phy_reg_m88"); - if (!(hw->phy.ops.acquire)) - goto out; + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; ret_val = hw->phy.ops.acquire(hw); if (ret_val) - goto out; + return ret_val; ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); + data); hw->phy.ops.release(hw); -out: return ret_val; } +/** + * e1000_set_page_igp - Set page as on IGP-like PHY(s) + * @hw: pointer to the HW structure + * @page: page to set (shifted left when necessary) + * + * Sets PHY page required for PHY register access. Assumes semaphore is + * already acquired. Note, this function sets phy.addr to 1 so the caller + * must set it appropriately (if necessary) after this function returns. + **/ +s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page) +{ + DEBUGFUNC("e1000_set_page_igp"); + + DEBUGOUT1("Setting page 0x%x\n", page); + + hw->phy.addr = 1; + + return e1000_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page); +} + /** * __e1000_read_phy_reg_igp - Read igp PHY register * @hw: pointer to the HW structure @@ -501,36 +734,32 @@ out: * semaphores before exiting. **/ static s32 __e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, - bool locked) + bool locked) { s32 ret_val = E1000_SUCCESS; DEBUGFUNC("__e1000_read_phy_reg_igp"); if (!locked) { - if (!(hw->phy.ops.acquire)) - goto out; + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; ret_val = hw->phy.ops.acquire(hw); if (ret_val) - goto out; + return ret_val; } - if (offset > MAX_PHY_MULTI_PAGE_REG) { + if (offset > MAX_PHY_MULTI_PAGE_REG) ret_val = e1000_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (u16)offset); - if (ret_val) - goto release; - } - - ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); - -release: + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); + if (!ret_val) + ret_val = e1000_read_phy_reg_mdic(hw, + MAX_PHY_REG_ADDRESS & offset, + data); if (!locked) hw->phy.ops.release(hw); -out: + return ret_val; } @@ -546,7 +775,7 @@ out: **/ s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) { - return __e1000_read_phy_reg_igp(hw, offset, data, FALSE); + return __e1000_read_phy_reg_igp(hw, offset, data, false); } /** @@ -560,7 +789,7 @@ s32 e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) **/ s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data) { - return __e1000_read_phy_reg_igp(hw, offset, data, TRUE); + return __e1000_read_phy_reg_igp(hw, offset, data, true); } /** @@ -574,37 +803,32 @@ s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data) * at the offset. Release any acquired semaphores before exiting. **/ static s32 __e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, - bool locked) + bool locked) { s32 ret_val = E1000_SUCCESS; DEBUGFUNC("e1000_write_phy_reg_igp"); if (!locked) { - if (!(hw->phy.ops.acquire)) - goto out; + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; ret_val = hw->phy.ops.acquire(hw); if (ret_val) - goto out; + return ret_val; } - if (offset > MAX_PHY_MULTI_PAGE_REG) { + if (offset > MAX_PHY_MULTI_PAGE_REG) ret_val = e1000_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (u16)offset); - if (ret_val) - goto release; - } - - ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); - -release: + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); + if (!ret_val) + ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & + offset, + data); if (!locked) hw->phy.ops.release(hw); -out: return ret_val; } @@ -619,7 +843,7 @@ out: **/ s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) { - return __e1000_write_phy_reg_igp(hw, offset, data, FALSE); + return __e1000_write_phy_reg_igp(hw, offset, data, false); } /** @@ -633,7 +857,7 @@ s32 e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) **/ s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data) { - return __e1000_write_phy_reg_igp(hw, offset, data, TRUE); + return __e1000_write_phy_reg_igp(hw, offset, data, true); } /** @@ -648,25 +872,27 @@ s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data) * Release any acquired semaphores before exiting. **/ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, - bool locked) + bool locked) { u32 kmrnctrlsta; - s32 ret_val = E1000_SUCCESS; DEBUGFUNC("__e1000_read_kmrn_reg"); if (!locked) { - if (!(hw->phy.ops.acquire)) - goto out; + s32 ret_val = E1000_SUCCESS; + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; ret_val = hw->phy.ops.acquire(hw); if (ret_val) - goto out; + return ret_val; } kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & - E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; + E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta); + E1000_WRITE_FLUSH(hw); usec_delay(2); @@ -676,8 +902,7 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, if (!locked) hw->phy.ops.release(hw); -out: - return ret_val; + return E1000_SUCCESS; } /** @@ -692,7 +917,7 @@ out: **/ s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data) { - return __e1000_read_kmrn_reg(hw, offset, data, FALSE); + return __e1000_read_kmrn_reg(hw, offset, data, false); } /** @@ -707,7 +932,7 @@ s32 e1000_read_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 *data) **/ s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) { - return __e1000_read_kmrn_reg(hw, offset, data, TRUE); + return __e1000_read_kmrn_reg(hw, offset, data, true); } /** @@ -722,33 +947,34 @@ s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) * before exiting. **/ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, - bool locked) + bool locked) { u32 kmrnctrlsta; - s32 ret_val = E1000_SUCCESS; DEBUGFUNC("e1000_write_kmrn_reg_generic"); if (!locked) { - if (!(hw->phy.ops.acquire)) - goto out; + s32 ret_val = E1000_SUCCESS; + + if (!hw->phy.ops.acquire) + return E1000_SUCCESS; ret_val = hw->phy.ops.acquire(hw); if (ret_val) - goto out; + return ret_val; } kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & - E1000_KMRNCTRLSTA_OFFSET) | data; + E1000_KMRNCTRLSTA_OFFSET) | data; E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta); + E1000_WRITE_FLUSH(hw); usec_delay(2); if (!locked) hw->phy.ops.release(hw); -out: - return ret_val; + return E1000_SUCCESS; } /** @@ -762,7 +988,7 @@ out: **/ s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data) { - return __e1000_write_kmrn_reg(hw, offset, data, FALSE); + return __e1000_write_kmrn_reg(hw, offset, data, false); } /** @@ -776,7 +1002,47 @@ s32 e1000_write_kmrn_reg_generic(struct e1000_hw *hw, u32 offset, u16 data) **/ s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) { - return __e1000_write_kmrn_reg(hw, offset, data, TRUE); + return __e1000_write_kmrn_reg(hw, offset, data, true); +} + +/** + * e1000_set_master_slave_mode - Setup PHY for Master/slave mode + * @hw: pointer to the HW structure + * + * Sets up Master/slave mode + **/ +STATIC s32 e1000_set_master_slave_mode(struct e1000_hw *hw) +{ + s32 ret_val; + u16 phy_data; + + /* Resolve Master/Slave mode */ + ret_val = hw->phy.ops.read_reg(hw, PHY_1000T_CTRL, &phy_data); + if (ret_val) + return ret_val; + + /* load defaults for future use */ + hw->phy.original_ms_type = (phy_data & CR_1000T_MS_ENABLE) ? + ((phy_data & CR_1000T_MS_VALUE) ? + e1000_ms_force_master : + e1000_ms_force_slave) : e1000_ms_auto; + + switch (hw->phy.ms_type) { + case e1000_ms_force_master: + phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + break; + case e1000_ms_force_slave: + phy_data |= CR_1000T_MS_ENABLE; + phy_data &= ~(CR_1000T_MS_VALUE); + break; + case e1000_ms_auto: + phy_data &= ~CR_1000T_MS_ENABLE; + /* fall-through */ + default: + break; + } + + return hw->phy.ops.write_reg(hw, PHY_1000T_CTRL, phy_data); } /** @@ -792,23 +1058,18 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) DEBUGFUNC("e1000_copper_link_setup_82577"); - if (hw->phy.reset_disable) { - ret_val = E1000_SUCCESS; - goto out; - } - if (hw->phy.type == e1000_phy_82580) { ret_val = hw->phy.ops.reset(hw); if (ret_val) { DEBUGOUT("Error resetting the PHY.\n"); - goto out; + return ret_val; } } /* Enable CRS on Tx. This must be set for half-duplex operation. */ ret_val = hw->phy.ops.read_reg(hw, I82577_CFG_REG, &phy_data); if (ret_val) - goto out; + return ret_val; phy_data |= I82577_CFG_ASSERT_CRS_ON_TX; @@ -816,9 +1077,35 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) phy_data |= I82577_CFG_ENABLE_DOWNSHIFT; ret_val = hw->phy.ops.write_reg(hw, I82577_CFG_REG, phy_data); + if (ret_val) + return ret_val; -out: - return ret_val; + /* Set MDI/MDIX mode */ + ret_val = hw->phy.ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data); + if (ret_val) + return ret_val; + phy_data &= ~I82577_PHY_CTRL2_MDIX_CFG_MASK; + /* Options: + * 0 - Auto (default) + * 1 - MDI mode + * 2 - MDI-X mode + */ + switch (hw->phy.mdix) { + case 1: + break; + case 2: + phy_data |= I82577_PHY_CTRL2_MANUAL_MDIX; + break; + case 0: + default: + phy_data |= I82577_PHY_CTRL2_AUTO_MDI_MDIX; + break; + } + ret_val = hw->phy.ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data); + if (ret_val) + return ret_val; + + return e1000_set_master_slave_mode(hw); } /** @@ -836,20 +1123,17 @@ s32 e1000_copper_link_setup_m88(struct e1000_hw *hw) DEBUGFUNC("e1000_copper_link_setup_m88"); - if (phy->reset_disable) { - ret_val = E1000_SUCCESS; - goto out; - } /* Enable CRS on Tx. This must be set for half-duplex operation. */ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); if (ret_val) - goto out; + return ret_val; - phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + /* For BM PHY this bit is downshift enable */ + if (phy->type != e1000_phy_bm) + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; - /* - * Options: + /* Options: * MDI/MDI-X = 0 (default) * 0 - Auto for all speeds * 1 - MDI mode @@ -874,30 +1158,50 @@ s32 e1000_copper_link_setup_m88(struct e1000_hw *hw) break; } - /* - * Options: + /* Options: * disable_polarity_correction = 0 (default) * Automatic Correction for Reversed Cable Polarity * 0 - Disabled * 1 - Enabled */ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; - if (phy->disable_polarity_correction == 1) + if (phy->disable_polarity_correction) phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + /* Enable downshift on BM (disabled by default) */ + if (phy->type == e1000_phy_bm) { + /* For 82574/82583, first disable then enable downshift */ + if (phy->id == BME1000_E_PHY_ID_R2) { + phy_data &= ~BME1000_PSCR_ENABLE_DOWNSHIFT; + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + /* Commit the changes. */ + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + } + + phy_data |= BME1000_PSCR_ENABLE_DOWNSHIFT; + } + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); if (ret_val) - goto out; + return ret_val; - if (phy->revision < E1000_REVISION_4) { - /* - * Force TX_CLK in the Extended PHY Specific Control Register + if ((phy->type == e1000_phy_m88) && + (phy->revision < E1000_REVISION_4) && + (phy->id != BME1000_E_PHY_ID_R2)) { + /* Force TX_CLK in the Extended PHY Specific Control Register * to 25MHz clock. */ ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - &phy_data); + &phy_data); if (ret_val) - goto out; + return ret_val; phy_data |= M88E1000_EPSCR_TX_CLK_25; @@ -909,29 +1213,55 @@ s32 e1000_copper_link_setup_m88(struct e1000_hw *hw) } else { /* Configure Master and Slave downshift values */ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | - M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); + M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | - M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); + M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); } ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - phy_data); + phy_data); + if (ret_val) + return ret_val; + } + + if ((phy->type == e1000_phy_bm) && (phy->id == BME1000_E_PHY_ID_R2)) { + /* Set PHY page 0, register 29 to 0x0003 */ + ret_val = phy->ops.write_reg(hw, 29, 0x0003); + if (ret_val) + return ret_val; + + /* Set PHY page 0, register 30 to 0x0000 */ + ret_val = phy->ops.write_reg(hw, 30, 0x0000); if (ret_val) - goto out; + return ret_val; } /* Commit the changes. */ ret_val = phy->ops.commit(hw); if (ret_val) { DEBUGOUT("Error committing the PHY changes\n"); - goto out; + return ret_val; } -out: - return ret_val; -} + if (phy->type == e1000_phy_82578) { + ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + return ret_val; -/** - * e1000_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link + /* 82578 PHY - set the downshift count to 1x. */ + phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE; + phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK; + ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + } + + return E1000_SUCCESS; +} + +/** + * e1000_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link * @hw: pointer to the HW structure * * Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's. @@ -945,18 +1275,13 @@ s32 e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw) DEBUGFUNC("e1000_copper_link_setup_m88_gen2"); - if (phy->reset_disable) { - ret_val = E1000_SUCCESS; - goto out; - } /* Enable CRS on Tx. This must be set for half-duplex operation. */ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); if (ret_val) - goto out; + return ret_val; - /* - * Options: + /* Options: * MDI/MDI-X = 0 (default) * 0 - Auto for all speeds * 1 - MDI mode @@ -984,35 +1309,51 @@ s32 e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw) break; } - /* - * Options: + /* Options: * disable_polarity_correction = 0 (default) * Automatic Correction for Reversed Cable Polarity * 0 - Disabled * 1 - Enabled */ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; - if (phy->disable_polarity_correction == 1) + if (phy->disable_polarity_correction) phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; /* Enable downshift and setting it to X6 */ + if (phy->id == M88E1543_E_PHY_ID) { + phy_data &= ~I347AT4_PSCR_DOWNSHIFT_ENABLE; + ret_val = + phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if (ret_val) + return ret_val; + + ret_val = phy->ops.commit(hw); + if (ret_val) { + DEBUGOUT("Error committing the PHY changes\n"); + return ret_val; + } + } + phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK; phy_data |= I347AT4_PSCR_DOWNSHIFT_6X; phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE; ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); if (ret_val) - goto out; + return ret_val; /* Commit the changes. */ ret_val = phy->ops.commit(hw); if (ret_val) { DEBUGOUT("Error committing the PHY changes\n"); - goto out; + return ret_val; } -out: - return ret_val; + ret_val = e1000_set_master_slave_mode(hw); + if (ret_val) + return ret_val; + + return E1000_SUCCESS; } /** @@ -1030,35 +1371,42 @@ s32 e1000_copper_link_setup_igp(struct e1000_hw *hw) DEBUGFUNC("e1000_copper_link_setup_igp"); - if (phy->reset_disable) { - ret_val = E1000_SUCCESS; - goto out; - } ret_val = hw->phy.ops.reset(hw); if (ret_val) { DEBUGOUT("Error resetting the PHY.\n"); - goto out; + return ret_val; } - /* - * Wait 100ms for MAC to configure PHY from NVM settings, to avoid + /* Wait 100ms for MAC to configure PHY from NVM settings, to avoid * timeout issues when LFS is enabled. */ msec_delay(100); + /* The NVM settings will configure LPLU in D3 for + * non-IGP1 PHYs. + */ + if (phy->type == e1000_phy_igp) { + /* disable lplu d3 during driver init */ + ret_val = hw->phy.ops.set_d3_lplu_state(hw, false); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D3\n"); + return ret_val; + } + } + /* disable lplu d0 during driver init */ if (hw->phy.ops.set_d0_lplu_state) { - ret_val = hw->phy.ops.set_d0_lplu_state(hw, FALSE); + ret_val = hw->phy.ops.set_d0_lplu_state(hw, false); if (ret_val) { DEBUGOUT("Error Disabling LPLU D0\n"); - goto out; + return ret_val; } } /* Configure mdi-mdix settings */ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data); if (ret_val) - goto out; + return ret_val; data &= ~IGP01E1000_PSCR_AUTO_MDIX; @@ -1076,141 +1424,43 @@ s32 e1000_copper_link_setup_igp(struct e1000_hw *hw) } ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, data); if (ret_val) - goto out; + return ret_val; /* set auto-master slave resolution settings */ if (hw->mac.autoneg) { - /* - * when autonegotiation advertisement is only 1000Mbps then we + /* when autonegotiation advertisement is only 1000Mbps then we * should disable SmartSpeed and enable Auto MasterSlave * resolution as hardware default. */ if (phy->autoneg_advertised == ADVERTISE_1000_FULL) { /* Disable SmartSpeed */ ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) - goto out; + return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) - goto out; + return ret_val; /* Set auto Master/Slave resolution process */ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data); if (ret_val) - goto out; + return ret_val; data &= ~CR_1000T_MS_ENABLE; ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data); if (ret_val) - goto out; - } - - ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data); - if (ret_val) - goto out; - - /* load defaults for future use */ - phy->original_ms_type = (data & CR_1000T_MS_ENABLE) ? - ((data & CR_1000T_MS_VALUE) ? - e1000_ms_force_master : - e1000_ms_force_slave) : - e1000_ms_auto; - - switch (phy->ms_type) { - case e1000_ms_force_master: - data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); - break; - case e1000_ms_force_slave: - data |= CR_1000T_MS_ENABLE; - data &= ~(CR_1000T_MS_VALUE); - break; - case e1000_ms_auto: - data &= ~CR_1000T_MS_ENABLE; - default: - break; + return ret_val; } - ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data); - if (ret_val) - goto out; - } - -out: - return ret_val; -} - -/** - * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link - * @hw: pointer to the HW structure - * - * Performs initial bounds checking on autoneg advertisement parameter, then - * configure to advertise the full capability. Setup the PHY to autoneg - * and restart the negotiation process between the link partner. If - * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. - **/ -static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_ctrl; - - DEBUGFUNC("e1000_copper_link_autoneg"); - - /* - * Perform some bounds checking on the autoneg advertisement - * parameter. - */ - phy->autoneg_advertised &= phy->autoneg_mask; - - /* - * If autoneg_advertised is zero, we assume it was not defaulted - * by the calling code so we set to advertise full capability. - */ - if (phy->autoneg_advertised == 0) - phy->autoneg_advertised = phy->autoneg_mask; - - DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); - ret_val = e1000_phy_setup_autoneg(hw); - if (ret_val) { - DEBUGOUT("Error Setting up Auto-Negotiation\n"); - goto out; - } - DEBUGOUT("Restarting Auto-Neg\n"); - - /* - * Restart auto-negotiation by setting the Auto Neg Enable bit and - * the Auto Neg Restart bit in the PHY control register. - */ - ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); - if (ret_val) - goto out; - - phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); - ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl); - if (ret_val) - goto out; - /* - * Does the user want to wait for Auto-Neg to complete here, or - * check at a later time (for example, callback routine). - */ - if (phy->autoneg_wait_to_complete) { - ret_val = hw->mac.ops.wait_autoneg(hw); - if (ret_val) { - DEBUGOUT("Error while waiting for " - "autoneg to complete\n"); - goto out; - } + ret_val = e1000_set_master_slave_mode(hw); } - hw->mac.get_link_status = TRUE; - -out: return ret_val; } @@ -1223,7 +1473,7 @@ out: * return successful. Otherwise, setup advertisement and flow control to * the appropriate values for the wanted auto-negotiation. **/ -static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) +s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; s32 ret_val; @@ -1237,33 +1487,31 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) /* Read the MII Auto-Neg Advertisement Register (Address 4). */ ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg); if (ret_val) - goto out; + return ret_val; if (phy->autoneg_mask & ADVERTISE_1000_FULL) { /* Read the MII 1000Base-T Control Register (Address 9). */ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, - &mii_1000t_ctrl_reg); + &mii_1000t_ctrl_reg); if (ret_val) - goto out; + return ret_val; } - /* - * Need to parse both autoneg_advertised and fc and set up + /* Need to parse both autoneg_advertised and fc and set up * the appropriate PHY registers. First we will parse for * autoneg_advertised software override. Since we can advertise * a plethora of combinations, we need to check each bit * individually. */ - /* - * First we clear all the 10/100 mb speed bits in the Auto-Neg + /* First we clear all the 10/100 mb speed bits in the Auto-Neg * Advertisement Register (Address 4) and the 1000 mb speed bits in * the 1000Base-T Control Register (Address 9). */ mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS | - NWAY_AR_100TX_HD_CAPS | - NWAY_AR_10T_FD_CAPS | - NWAY_AR_10T_HD_CAPS); + NWAY_AR_100TX_HD_CAPS | + NWAY_AR_10T_FD_CAPS | + NWAY_AR_10T_HD_CAPS); mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); DEBUGOUT1("autoneg_advertised %x\n", phy->autoneg_advertised); @@ -1302,8 +1550,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; } - /* - * Check for a software override of the flow control settings, and + /* Check for a software override of the flow control settings, and * setup the PHY advertisement registers accordingly. If * auto-negotiation is enabled, then software will have to set the * "PAUSE" bits to the correct value in the Auto-Negotiation @@ -1322,15 +1569,13 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) */ switch (hw->fc.current_mode) { case e1000_fc_none: - /* - * Flow control (Rx & Tx) is completely disabled by a + /* Flow control (Rx & Tx) is completely disabled by a * software over-ride. */ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; case e1000_fc_rx_pause: - /* - * Rx Flow control is enabled, and Tx Flow control is + /* Rx Flow control is enabled, and Tx Flow control is * disabled, by a software over-ride. * * Since there really isn't a way to advertise that we are @@ -1342,41 +1587,97 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; case e1000_fc_tx_pause: - /* - * Tx Flow control is enabled, and Rx Flow control is + /* Tx Flow control is enabled, and Rx Flow control is * disabled, by a software over-ride. */ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; break; case e1000_fc_full: - /* - * Flow control (both Rx and Tx) is enabled by a software + /* Flow control (both Rx and Tx) is enabled by a software * over-ride. */ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; default: DEBUGOUT("Flow control param set incorrectly\n"); - ret_val = -E1000_ERR_CONFIG; - goto out; + return -E1000_ERR_CONFIG; } ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg); if (ret_val) - goto out; + return ret_val; DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); - if (phy->autoneg_mask & ADVERTISE_1000_FULL) { - ret_val = phy->ops.write_reg(hw, - PHY_1000T_CTRL, - mii_1000t_ctrl_reg); - if (ret_val) - goto out; + if (phy->autoneg_mask & ADVERTISE_1000_FULL) + ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, + mii_1000t_ctrl_reg); + + return ret_val; +} + +/** + * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link + * @hw: pointer to the HW structure + * + * Performs initial bounds checking on autoneg advertisement parameter, then + * configure to advertise the full capability. Setup the PHY to autoneg + * and restart the negotiation process between the link partner. If + * autoneg_wait_to_complete, then wait for autoneg to complete before exiting. + **/ +s32 e1000_copper_link_autoneg(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_ctrl; + + DEBUGFUNC("e1000_copper_link_autoneg"); + + /* Perform some bounds checking on the autoneg advertisement + * parameter. + */ + phy->autoneg_advertised &= phy->autoneg_mask; + + /* If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if (!phy->autoneg_advertised) + phy->autoneg_advertised = phy->autoneg_mask; + + DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); + ret_val = e1000_phy_setup_autoneg(hw); + if (ret_val) { + DEBUGOUT("Error Setting up Auto-Negotiation\n"); + return ret_val; } + DEBUGOUT("Restarting Auto-Neg\n"); + + /* Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); + if (ret_val) + return ret_val; + + phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl); + if (ret_val) + return ret_val; + + /* Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if (phy->autoneg_wait_to_complete) { + ret_val = e1000_wait_autoneg(hw); + if (ret_val) { + DEBUGOUT("Error while waiting for autoneg to complete\n"); + return ret_val; + } + } + + hw->mac.get_link_status = true; -out: return ret_val; } @@ -1397,46 +1698,40 @@ s32 e1000_setup_copper_link_generic(struct e1000_hw *hw) DEBUGFUNC("e1000_setup_copper_link_generic"); if (hw->mac.autoneg) { - /* - * Setup autoneg and flow control advertisement and perform + /* Setup autoneg and flow control advertisement and perform * autonegotiation. */ ret_val = e1000_copper_link_autoneg(hw); if (ret_val) - goto out; + return ret_val; } else { - /* - * PHY will be set to 10H, 10F, 100H or 100F + /* PHY will be set to 10H, 10F, 100H or 100F * depending on user settings. */ DEBUGOUT("Forcing Speed and Duplex\n"); ret_val = hw->phy.ops.force_speed_duplex(hw); if (ret_val) { DEBUGOUT("Error Forcing Speed and Duplex\n"); - goto out; + return ret_val; } } - /* - * Check link status. Wait up to 100 microseconds for link to become + /* Check link status. Wait up to 100 microseconds for link to become * valid. */ - ret_val = e1000_phy_has_link_generic(hw, - COPPER_LINK_UP_LIMIT, - 10, - &link); + ret_val = e1000_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 10, + &link); if (ret_val) - goto out; + return ret_val; if (link) { DEBUGOUT("Valid link established!!!\n"); - e1000_config_collision_dist_generic(hw); + hw->mac.ops.config_collision_dist(hw); ret_val = e1000_config_fc_after_link_up_generic(hw); } else { DEBUGOUT("Unable to establish link!!!\n"); } -out: return ret_val; } @@ -1459,28 +1754,27 @@ s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw) ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); if (ret_val) - goto out; + return ret_val; e1000_phy_force_speed_duplex_setup(hw, &phy_data); ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); if (ret_val) - goto out; + return ret_val; - /* - * Clear Auto-Crossover to force MDI manually. IGP requires MDI + /* Clear Auto-Crossover to force MDI manually. IGP requires MDI * forced whenever speed and duplex are forced. */ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); if (ret_val) - goto out; + return ret_val; phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); if (ret_val) - goto out; + return ret_val; DEBUGOUT1("IGP PSCR: %X\n", phy_data); @@ -1489,26 +1783,19 @@ s32 e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw) if (phy->autoneg_wait_to_complete) { DEBUGOUT("Waiting for forced speed/duplex link on IGP phy.\n"); - ret_val = e1000_phy_has_link_generic(hw, - PHY_FORCE_LIMIT, - 100000, - &link); + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); if (ret_val) - goto out; + return ret_val; if (!link) DEBUGOUT("Link taking longer than expected.\n"); /* Try once more */ - ret_val = e1000_phy_has_link_generic(hw, - PHY_FORCE_LIMIT, - 100000, - &link); - if (ret_val) - goto out; + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); } -out: return ret_val; } @@ -1531,105 +1818,125 @@ s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_force_speed_duplex_m88"); - /* - * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI - * forced whenever speed and duplex are forced. - */ - ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) - goto out; + /* I210 and I211 devices support Auto-Crossover in forced operation. */ + if (phy->type != e1000_phy_i210) { + /* Clear Auto-Crossover to force MDI manually. M88E1000 + * requires MDI forced whenever speed and duplex are forced. + */ + ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, + &phy_data); + if (ret_val) + return ret_val; - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; - ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if (ret_val) - goto out; + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, + phy_data); + if (ret_val) + return ret_val; + } DEBUGOUT1("M88E1000 PSCR: %X\n", phy_data); ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); if (ret_val) - goto out; + return ret_val; e1000_phy_force_speed_duplex_setup(hw, &phy_data); ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); if (ret_val) - goto out; + return ret_val; /* Reset the phy to commit changes. */ ret_val = hw->phy.ops.commit(hw); if (ret_val) - goto out; + return ret_val; if (phy->autoneg_wait_to_complete) { DEBUGOUT("Waiting for forced speed/duplex link on M88 phy.\n"); ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, - 100000, &link); + 100000, &link); if (ret_val) - goto out; + return ret_val; if (!link) { - if (hw->phy.type != e1000_phy_m88 || - hw->phy.id == I347AT4_E_PHY_ID || - hw->phy.id == M88E1340M_E_PHY_ID || - hw->phy.id == M88E1112_E_PHY_ID) { + bool reset_dsp = true; + + switch (hw->phy.id) { + case I347AT4_E_PHY_ID: + case M88E1340M_E_PHY_ID: + case M88E1112_E_PHY_ID: + case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: + case I210_I_PHY_ID: + reset_dsp = false; + break; + default: + if (hw->phy.type != e1000_phy_m88) + reset_dsp = false; + break; + } + + if (!reset_dsp) { DEBUGOUT("Link taking longer than expected.\n"); } else { - /* - * We didn't get link. + /* We didn't get link. * Reset the DSP and cross our fingers. */ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x001d); if (ret_val) - goto out; + return ret_val; ret_val = e1000_phy_reset_dsp_generic(hw); if (ret_val) - goto out; + return ret_val; } } /* Try once more */ ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, - 100000, &link); + 100000, &link); if (ret_val) - goto out; + return ret_val; } - if (hw->phy.type != e1000_phy_m88 || - hw->phy.id == I347AT4_E_PHY_ID || - hw->phy.id == M88E1340M_E_PHY_ID || - hw->phy.id == M88E1112_E_PHY_ID) - goto out; + if (hw->phy.type != e1000_phy_m88) + return E1000_SUCCESS; + if (hw->phy.id == I347AT4_E_PHY_ID || + hw->phy.id == M88E1340M_E_PHY_ID || + hw->phy.id == M88E1112_E_PHY_ID) + return E1000_SUCCESS; + if (hw->phy.id == I210_I_PHY_ID) + return E1000_SUCCESS; + if ((hw->phy.id == M88E1543_E_PHY_ID) || + (hw->phy.id == M88E1512_E_PHY_ID)) + return E1000_SUCCESS; ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); if (ret_val) - goto out; + return ret_val; - /* - * Resetting the phy means we need to re-force TX_CLK in the + /* Resetting the phy means we need to re-force TX_CLK in the * Extended PHY Specific Control Register to 25MHz clock from * the reset value of 2.5MHz. */ phy_data |= M88E1000_EPSCR_TX_CLK_25; ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); if (ret_val) - goto out; + return ret_val; - /* - * In addition, we must re-enable CRS on Tx for both half and full + /* In addition, we must re-enable CRS on Tx for both half and full * duplex. */ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); if (ret_val) - goto out; + return ret_val; phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); -out: return ret_val; } @@ -1652,25 +1959,25 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &data); if (ret_val) - goto out; + return ret_val; e1000_phy_force_speed_duplex_setup(hw, &data); ret_val = phy->ops.write_reg(hw, PHY_CONTROL, data); if (ret_val) - goto out; + return ret_val; /* Disable MDI-X support for 10/100 */ ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data); if (ret_val) - goto out; + return ret_val; data &= ~IFE_PMC_AUTO_MDIX; data &= ~IFE_PMC_FORCE_MDIX; ret_val = phy->ops.write_reg(hw, IFE_PHY_MDIX_CONTROL, data); if (ret_val) - goto out; + return ret_val; DEBUGOUT1("IFE PMC: %X\n", data); @@ -1679,27 +1986,22 @@ s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) if (phy->autoneg_wait_to_complete) { DEBUGOUT("Waiting for forced speed/duplex link on IFE phy.\n"); - ret_val = e1000_phy_has_link_generic(hw, - PHY_FORCE_LIMIT, - 100000, - &link); + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); if (ret_val) - goto out; + return ret_val; if (!link) DEBUGOUT("Link taking longer than expected.\n"); /* Try once more */ - ret_val = e1000_phy_has_link_generic(hw, - PHY_FORCE_LIMIT, - 100000, - &link); + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); if (ret_val) - goto out; + return ret_val; } -out: - return ret_val; + return E1000_SUCCESS; } /** @@ -1750,16 +2052,15 @@ void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) { ctrl |= E1000_CTRL_SPD_100; *phy_ctrl |= MII_CR_SPEED_100; - *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); + *phy_ctrl &= ~MII_CR_SPEED_1000; DEBUGOUT("Forcing 100mb\n"); } else { ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); - *phy_ctrl |= MII_CR_SPEED_10; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); DEBUGOUT("Forcing 10mb\n"); } - e1000_config_collision_dist_generic(hw); + hw->mac.ops.config_collision_dist(hw); E1000_WRITE_REG(hw, E1000_CTRL, ctrl); } @@ -1772,7 +2073,7 @@ void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) * Success returns 0, Failure returns 1 * * The low power link up (lplu) state is set to the power management level D3 - * and SmartSpeed is disabled when active is TRUE, else clear lplu for D3 + * and SmartSpeed is disabled when active is true, else clear lplu for D3 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU * is used during Dx states where the power conservation is most important. * During driver activity, SmartSpeed should be enabled so performance is @@ -1781,78 +2082,76 @@ void e1000_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; + s32 ret_val; u16 data; DEBUGFUNC("e1000_set_d3_lplu_state_generic"); - if (!(hw->phy.ops.read_reg)) - goto out; + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); if (ret_val) - goto out; + return ret_val; if (!active) { data &= ~IGP02E1000_PM_D3_LPLU; ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); + data); if (ret_val) - goto out; - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used + return ret_val; + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most * important. During driver activity we should enable * SmartSpeed, so performance is maintained. */ if (phy->smart_speed == e1000_smart_speed_on) { ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) - goto out; + return ret_val; data |= IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) - goto out; + return ret_val; } else if (phy->smart_speed == e1000_smart_speed_off) { ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) - goto out; + return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) - goto out; + return ret_val; } } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || - (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || - (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { + (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || + (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { data |= IGP02E1000_PM_D3_LPLU; ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); + data); if (ret_val) - goto out; + return ret_val; /* When LPLU is enabled, we should disable SmartSpeed */ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); + &data); if (ret_val) - goto out; + return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - data); + data); } -out: return ret_val; } @@ -1873,29 +2172,31 @@ s32 e1000_check_downshift_generic(struct e1000_hw *hw) DEBUGFUNC("e1000_check_downshift_generic"); switch (phy->type) { + case e1000_phy_i210: case e1000_phy_m88: case e1000_phy_gg82563: - offset = M88E1000_PHY_SPEC_STATUS; - mask = M88E1000_PSSR_DOWNSHIFT; + case e1000_phy_bm: + case e1000_phy_82578: + offset = M88E1000_PHY_SPEC_STATUS; + mask = M88E1000_PSSR_DOWNSHIFT; break; + case e1000_phy_igp: case e1000_phy_igp_2: case e1000_phy_igp_3: - offset = IGP01E1000_PHY_LINK_HEALTH; - mask = IGP01E1000_PLHR_SS_DOWNGRADE; + offset = IGP01E1000_PHY_LINK_HEALTH; + mask = IGP01E1000_PLHR_SS_DOWNGRADE; break; default: /* speed downshift not supported */ - phy->speed_downgraded = FALSE; - ret_val = E1000_SUCCESS; - goto out; + phy->speed_downgraded = false; + return E1000_SUCCESS; } ret_val = phy->ops.read_reg(hw, offset, &phy_data); if (!ret_val) - phy->speed_downgraded = (phy_data & mask) ? TRUE : FALSE; + phy->speed_downgraded = !!(phy_data & mask); -out: return ret_val; } @@ -1918,9 +2219,9 @@ s32 e1000_check_polarity_m88(struct e1000_hw *hw) ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &data); if (!ret_val) - phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; + phy->cable_polarity = ((data & M88E1000_PSSR_REV_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); return ret_val; } @@ -1942,35 +2243,32 @@ s32 e1000_check_polarity_igp(struct e1000_hw *hw) DEBUGFUNC("e1000_check_polarity_igp"); - /* - * Polarity is determined based on the speed of + /* Polarity is determined based on the speed of * our connection. */ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data); if (ret_val) - goto out; + return ret_val; if ((data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { - offset = IGP01E1000_PHY_PCS_INIT_REG; - mask = IGP01E1000_PHY_POLARITY_MASK; + offset = IGP01E1000_PHY_PCS_INIT_REG; + mask = IGP01E1000_PHY_POLARITY_MASK; } else { - /* - * This really only applies to 10Mbps since + /* This really only applies to 10Mbps since * there is no polarity for 100Mbps (always 0). */ - offset = IGP01E1000_PHY_PORT_STATUS; - mask = IGP01E1000_PSSR_POLARITY_REVERSED; + offset = IGP01E1000_PHY_PORT_STATUS; + mask = IGP01E1000_PSSR_POLARITY_REVERSED; } ret_val = phy->ops.read_reg(hw, offset, &data); if (!ret_val) - phy->cable_polarity = (data & mask) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; + phy->cable_polarity = ((data & mask) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); -out: return ret_val; } @@ -1988,8 +2286,7 @@ s32 e1000_check_polarity_ife(struct e1000_hw *hw) DEBUGFUNC("e1000_check_polarity_ife"); - /* - * Polarity is determined based on the reversal feature being enabled. + /* Polarity is determined based on the reversal feature being enabled. */ if (phy->polarity_correction) { offset = IFE_PHY_EXTENDED_STATUS_CONTROL; @@ -2002,28 +2299,28 @@ s32 e1000_check_polarity_ife(struct e1000_hw *hw) ret_val = phy->ops.read_reg(hw, offset, &phy_data); if (!ret_val) - phy->cable_polarity = (phy_data & mask) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; + phy->cable_polarity = ((phy_data & mask) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); return ret_val; } /** - * e1000_wait_autoneg_generic - Wait for auto-neg completion + * e1000_wait_autoneg - Wait for auto-neg completion * @hw: pointer to the HW structure * * Waits for auto-negotiation to complete or for the auto-negotiation time * limit to expire, which ever happens first. **/ -s32 e1000_wait_autoneg_generic(struct e1000_hw *hw) +static s32 e1000_wait_autoneg(struct e1000_hw *hw) { s32 ret_val = E1000_SUCCESS; u16 i, phy_status; - DEBUGFUNC("e1000_wait_autoneg_generic"); + DEBUGFUNC("e1000_wait_autoneg"); - if (!(hw->phy.ops.read_reg)) + if (!hw->phy.ops.read_reg) return E1000_SUCCESS; /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */ @@ -2039,8 +2336,7 @@ s32 e1000_wait_autoneg_generic(struct e1000_hw *hw) msec_delay(100); } - /* - * PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation + /* PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation * has completed. */ return ret_val; @@ -2056,26 +2352,24 @@ s32 e1000_wait_autoneg_generic(struct e1000_hw *hw) * Polls the PHY status register for link, 'iterations' number of times. **/ s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, - u32 usec_interval, bool *success) + u32 usec_interval, bool *success) { s32 ret_val = E1000_SUCCESS; u16 i, phy_status; DEBUGFUNC("e1000_phy_has_link_generic"); - if (!(hw->phy.ops.read_reg)) + if (!hw->phy.ops.read_reg) return E1000_SUCCESS; for (i = 0; i < iterations; i++) { - /* - * Some PHYs require the PHY_STATUS register to be read + /* Some PHYs require the PHY_STATUS register to be read * twice due to the link bit being sticky. No harm doing * it across the board. */ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status); if (ret_val) - /* - * If the first read fails, another entity may have + /* If the first read fails, another entity may have * ownership of the resources, wait and try again to * see if they have relinquished the resources yet. */ @@ -2091,7 +2385,7 @@ s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, usec_delay(usec_interval); } - *success = (i < iterations) ? TRUE : FALSE; + *success = (i < iterations); return ret_val; } @@ -2121,91 +2415,113 @@ s32 e1000_get_cable_length_m88(struct e1000_hw *hw) ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); if (ret_val) - goto out; + return ret_val; - index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> - M88E1000_PSSR_CABLE_LENGTH_SHIFT; - if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) { - ret_val = -E1000_ERR_PHY; - goto out; - } + index = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + M88E1000_PSSR_CABLE_LENGTH_SHIFT); + + if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) + return -E1000_ERR_PHY; phy->min_cable_length = e1000_m88_cable_length_table[index]; phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; -out: - return ret_val; + return E1000_SUCCESS; } s32 e1000_get_cable_length_m88_gen2(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; s32 ret_val; - u16 phy_data, phy_data2, index, default_page, is_cm; + u16 phy_data, phy_data2, is_cm; + u16 index, default_page; DEBUGFUNC("e1000_get_cable_length_m88_gen2"); switch (hw->phy.id) { + case I210_I_PHY_ID: + /* Get cable length from PHY Cable Diagnostics Control Reg */ + ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + + (I347AT4_PCDL + phy->addr), + &phy_data); + if (ret_val) + return ret_val; + + /* Check if the unit of cable length is meters or cm */ + ret_val = phy->ops.read_reg(hw, (0x7 << GS40G_PAGE_SHIFT) + + I347AT4_PCDC, &phy_data2); + if (ret_val) + return ret_val; + + is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); + + /* Populate the phy structure with cable length in meters */ + phy->min_cable_length = phy_data / (is_cm ? 100 : 1); + phy->max_cable_length = phy_data / (is_cm ? 100 : 1); + phy->cable_length = phy_data / (is_cm ? 100 : 1); + break; + case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: case M88E1340M_E_PHY_ID: case I347AT4_E_PHY_ID: /* Remember the original page select and set it to 7 */ ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, &default_page); if (ret_val) - goto out; + return ret_val; ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07); if (ret_val) - goto out; + return ret_val; /* Get cable length from PHY Cable Diagnostics Control Reg */ ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr), &phy_data); if (ret_val) - goto out; + return ret_val; /* Check if the unit of cable length is meters or cm */ ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2); if (ret_val) - goto out; + return ret_val; - is_cm = !(phy_data & I347AT4_PCDC_CABLE_LENGTH_UNIT); + is_cm = !(phy_data2 & I347AT4_PCDC_CABLE_LENGTH_UNIT); /* Populate the phy structure with cable length in meters */ phy->min_cable_length = phy_data / (is_cm ? 100 : 1); phy->max_cable_length = phy_data / (is_cm ? 100 : 1); phy->cable_length = phy_data / (is_cm ? 100 : 1); - /* Reset the page selec to its original value */ + /* Reset the page select to its original value */ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, default_page); if (ret_val) - goto out; + return ret_val; break; + case M88E1112_E_PHY_ID: /* Remember the original page select and set it to 5 */ ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT, &default_page); if (ret_val) - goto out; + return ret_val; ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05); if (ret_val) - goto out; + return ret_val; ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE, &phy_data); if (ret_val) - goto out; + return ret_val; index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> M88E1000_PSSR_CABLE_LENGTH_SHIFT; - if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) { - ret_val = -E1000_ERR_PHY; - goto out; - } + + if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) + return -E1000_ERR_PHY; phy->min_cable_length = e1000_m88_cable_length_table[index]; phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; @@ -2217,15 +2533,13 @@ s32 e1000_get_cable_length_m88_gen2(struct e1000_hw *hw) ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, default_page); if (ret_val) - goto out; + return ret_val; break; default: - ret_val = -E1000_ERR_PHY; - goto out; + return -E1000_ERR_PHY; } -out: return ret_val; } @@ -2243,15 +2557,15 @@ out: s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; + s32 ret_val; u16 phy_data, i, agc_value = 0; u16 cur_agc_index, max_agc_index = 0; u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { - IGP02E1000_PHY_AGC_A, - IGP02E1000_PHY_AGC_B, - IGP02E1000_PHY_AGC_C, - IGP02E1000_PHY_AGC_D + IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D }; DEBUGFUNC("e1000_get_cable_length_igp_2"); @@ -2260,23 +2574,20 @@ s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw) for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data); if (ret_val) - goto out; + return ret_val; - /* - * Getting bits 15:9, which represent the combination of + /* Getting bits 15:9, which represent the combination of * coarse and fine gain values. The result is a number * that can be put into the lookup table to obtain the * approximate cable length. */ - cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & - IGP02E1000_AGC_LENGTH_MASK; + cur_agc_index = ((phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & + IGP02E1000_AGC_LENGTH_MASK); /* Array index bound check. */ if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) || - (cur_agc_index == 0)) { - ret_val = -E1000_ERR_PHY; - goto out; - } + (cur_agc_index == 0)) + return -E1000_ERR_PHY; /* Remove min & max AGC values from calculation. */ if (e1000_igp_2_cable_length_table[min_agc_index] > @@ -2290,18 +2601,17 @@ s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw) } agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] + - e1000_igp_2_cable_length_table[max_agc_index]); + e1000_igp_2_cable_length_table[max_agc_index]); agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); /* Calculate cable length with the error range of +/- 10 meters. */ - phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ? - (agc_value - IGP02E1000_AGC_RANGE) : 0; + phy->min_cable_length = (((agc_value - IGP02E1000_AGC_RANGE) > 0) ? + (agc_value - IGP02E1000_AGC_RANGE) : 0); phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE; phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; -out: - return ret_val; + return E1000_SUCCESS; } /** @@ -2325,53 +2635,51 @@ s32 e1000_get_phy_info_m88(struct e1000_hw *hw) if (phy->media_type != e1000_media_type_copper) { DEBUGOUT("Phy info is only valid for copper media\n"); - ret_val = -E1000_ERR_CONFIG; - goto out; + return -E1000_ERR_CONFIG; } ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); if (ret_val) - goto out; + return ret_val; if (!link) { DEBUGOUT("Phy info is only valid if link is up\n"); - ret_val = -E1000_ERR_CONFIG; - goto out; + return -E1000_ERR_CONFIG; } ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); if (ret_val) - goto out; + return ret_val; - phy->polarity_correction = (phy_data & M88E1000_PSCR_POLARITY_REVERSAL) - ? TRUE : FALSE; + phy->polarity_correction = !!(phy_data & + M88E1000_PSCR_POLARITY_REVERSAL); ret_val = e1000_check_polarity_m88(hw); if (ret_val) - goto out; + return ret_val; ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); if (ret_val) - goto out; + return ret_val; - phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX) ? TRUE : FALSE; + phy->is_mdix = !!(phy_data & M88E1000_PSSR_MDIX); if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { ret_val = hw->phy.ops.get_cable_length(hw); if (ret_val) - goto out; + return ret_val; ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data); if (ret_val) - goto out; + return ret_val; phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; } else { /* Set values to "undefined" */ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; @@ -2379,7 +2687,6 @@ s32 e1000_get_phy_info_m88(struct e1000_hw *hw) phy->remote_rx = e1000_1000t_rx_status_undefined; } -out: return ret_val; } @@ -2403,50 +2710,48 @@ s32 e1000_get_phy_info_igp(struct e1000_hw *hw) ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); if (ret_val) - goto out; + return ret_val; if (!link) { DEBUGOUT("Phy info is only valid if link is up\n"); - ret_val = -E1000_ERR_CONFIG; - goto out; + return -E1000_ERR_CONFIG; } - phy->polarity_correction = TRUE; + phy->polarity_correction = true; ret_val = e1000_check_polarity_igp(hw); if (ret_val) - goto out; + return ret_val; ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data); if (ret_val) - goto out; + return ret_val; - phy->is_mdix = (data & IGP01E1000_PSSR_MDIX) ? TRUE : FALSE; + phy->is_mdix = !!(data & IGP01E1000_PSSR_MDIX); if ((data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { ret_val = phy->ops.get_cable_length(hw); if (ret_val) - goto out; + return ret_val; ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); if (ret_val) - goto out; + return ret_val; phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; } else { phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; phy->local_rx = e1000_1000t_rx_status_undefined; phy->remote_rx = e1000_1000t_rx_status_undefined; } -out: return ret_val; } @@ -2467,44 +2772,41 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw) ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); if (ret_val) - goto out; + return ret_val; if (!link) { DEBUGOUT("Phy info is only valid if link is up\n"); - ret_val = -E1000_ERR_CONFIG; - goto out; + return -E1000_ERR_CONFIG; } ret_val = phy->ops.read_reg(hw, IFE_PHY_SPECIAL_CONTROL, &data); if (ret_val) - goto out; - phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE) - ? FALSE : TRUE; + return ret_val; + phy->polarity_correction = !(data & IFE_PSC_AUTO_POLARITY_DISABLE); if (phy->polarity_correction) { ret_val = e1000_check_polarity_ife(hw); if (ret_val) - goto out; + return ret_val; } else { /* Polarity is forced */ - phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; + phy->cable_polarity = ((data & IFE_PSC_FORCE_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); } ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data); if (ret_val) - goto out; + return ret_val; - phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? TRUE : FALSE; + phy->is_mdix = !!(data & IFE_PMC_MDIX_STATUS); /* The following parameters are undefined for 10/100 operation. */ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; phy->local_rx = e1000_1000t_rx_status_undefined; phy->remote_rx = e1000_1000t_rx_status_undefined; -out: - return ret_val; + return E1000_SUCCESS; } /** @@ -2516,26 +2818,25 @@ out: **/ s32 e1000_phy_sw_reset_generic(struct e1000_hw *hw) { - s32 ret_val = E1000_SUCCESS; + s32 ret_val; u16 phy_ctrl; DEBUGFUNC("e1000_phy_sw_reset_generic"); - if (!(hw->phy.ops.read_reg)) - goto out; + if (!hw->phy.ops.read_reg) + return E1000_SUCCESS; ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl); if (ret_val) - goto out; + return ret_val; phy_ctrl |= MII_CR_RESET; ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl); if (ret_val) - goto out; + return ret_val; usec_delay(1); -out: return ret_val; } @@ -2551,20 +2852,20 @@ out: s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; + s32 ret_val; u32 ctrl; DEBUGFUNC("e1000_phy_hw_reset_generic"); - ret_val = phy->ops.check_reset_block(hw); - if (ret_val) { - ret_val = E1000_SUCCESS; - goto out; + if (phy->ops.check_reset_block) { + ret_val = phy->ops.check_reset_block(hw); + if (ret_val) + return E1000_SUCCESS; } ret_val = phy->ops.acquire(hw); if (ret_val) - goto out; + return ret_val; ctrl = E1000_READ_REG(hw, E1000_CTRL); E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_PHY_RST); @@ -2579,10 +2880,7 @@ s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw) phy->ops.release(hw); - ret_val = phy->ops.get_cfg_done(hw); - -out: - return ret_val; + return phy->ops.get_cfg_done(hw); } /** @@ -2592,9 +2890,10 @@ out: * Generic function to wait 10 milli-seconds for configuration to complete * and return success. **/ -s32 e1000_get_cfg_done_generic(struct e1000_hw *hw) +s32 e1000_get_cfg_done_generic(struct e1000_hw E1000_UNUSEDARG *hw) { DEBUGFUNC("e1000_get_cfg_done_generic"); + UNREFERENCED_1PARAMETER(hw); msec_delay_irq(10); @@ -2664,15 +2963,13 @@ s32 e1000_phy_init_script_igp3(struct e1000_hw *hw) hw->phy.ops.write_reg(hw, 0x1796, 0x0008); /* Change cg_icount + enable integbp for channels BCD */ hw->phy.ops.write_reg(hw, 0x1798, 0xD008); - /* - * Change cg_icount + enable integbp + change prop_factor_master + /* Change cg_icount + enable integbp + change prop_factor_master * to 8 for channel A */ hw->phy.ops.write_reg(hw, 0x1898, 0xD918); /* Disable AHT in Slave mode on channel A */ hw->phy.ops.write_reg(hw, 0x187A, 0x0800); - /* - * Enable LPLU and disable AN to 1000 in non-D0a states, + /* Enable LPLU and disable AN to 1000 in non-D0a states, * Enable SPD+B2B */ hw->phy.ops.write_reg(hw, 0x0019, 0x008D); @@ -2701,6 +2998,8 @@ enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id) case M88E1000_E_PHY_ID: case M88E1111_I_PHY_ID: case M88E1011_I_PHY_ID: + case M88E1543_E_PHY_ID: + case M88E1512_E_PHY_ID: case I347AT4_E_PHY_ID: case M88E1112_E_PHY_ID: case M88E1340M_E_PHY_ID: @@ -2720,9 +3019,28 @@ enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id) case IFE_C_E_PHY_ID: phy_type = e1000_phy_ife; break; + case BME1000_E_PHY_ID: + case BME1000_E_PHY_ID_R2: + phy_type = e1000_phy_bm; + break; + case I82578_E_PHY_ID: + phy_type = e1000_phy_82578; + break; + case I82577_E_PHY_ID: + phy_type = e1000_phy_82577; + break; + case I82579_E_PHY_ID: + phy_type = e1000_phy_82579; + break; + case I217_E_PHY_ID: + phy_type = e1000_phy_i217; + break; case I82580_I_PHY_ID: phy_type = e1000_phy_82580; break; + case I210_I_PHY_ID: + phy_type = e1000_phy_i210; + break; default: phy_type = e1000_phy_unknown; break; @@ -2740,7 +3058,6 @@ enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id) **/ s32 e1000_determine_phy_address(struct e1000_hw *hw) { - s32 ret_val = -E1000_ERR_PHY_TYPE; u32 phy_addr = 0; u32 i; enum e1000_phy_type phy_type = e1000_phy_unknown; @@ -2755,233 +3072,1198 @@ s32 e1000_determine_phy_address(struct e1000_hw *hw) e1000_get_phy_id(hw); phy_type = e1000_get_phy_type_from_id(hw->phy.id); - /* - * If phy_type is valid, break - we found our + /* If phy_type is valid, break - we found our * PHY address */ - if (phy_type != e1000_phy_unknown) { - ret_val = E1000_SUCCESS; - goto out; - } + if (phy_type != e1000_phy_unknown) + return E1000_SUCCESS; + msec_delay(1); i++; } while (i < 10); } -out: - return ret_val; + return -E1000_ERR_PHY_TYPE; } /** - * e1000_power_up_phy_copper - Restore copper link in case of PHY power down - * @hw: pointer to the HW structure + * e1000_get_phy_addr_for_bm_page - Retrieve PHY page address + * @page: page to access * - * In the case of a PHY power down to save power, or to turn off link during a - * driver unload, or wake on lan is not enabled, restore the link to previous - * settings. + * Returns the phy address for the page requested. **/ -void e1000_power_up_phy_copper(struct e1000_hw *hw) +static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg) { - u16 mii_reg = 0; + u32 phy_addr = 2; - /* The PHY will retain its settings across a power down/up cycle */ - hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); - mii_reg &= ~MII_CR_POWER_DOWN; - hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); + if ((page >= 768) || (page == 0 && reg == 25) || (reg == 31)) + phy_addr = 1; + + return phy_addr; } /** - * e1000_power_down_phy_copper - Restore copper link in case of PHY power down - * @hw: pointer to the HW structure + * e1000_write_phy_reg_bm - Write BM PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset * - * In the case of a PHY power down to save power, or to turn off link during a - * driver unload, or wake on lan is not enabled, restore the link to previous - * settings. + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. **/ -void e1000_power_down_phy_copper(struct e1000_hw *hw) +s32 e1000_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) { - u16 mii_reg = 0; + s32 ret_val; + u32 page = offset >> IGP_PAGE_SHIFT; - /* The PHY will retain its settings across a power down/up cycle */ - hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); - mii_reg |= MII_CR_POWER_DOWN; - hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); - msec_delay(1); + DEBUGFUNC("e1000_write_phy_reg_bm"); + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + /* Page 800 works differently than the rest so it has its own func */ + if (page == BM_WUC_PAGE) { + ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data, + false, false); + goto release; + } + + hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset); + + if (offset > MAX_PHY_MULTI_PAGE_REG) { + u32 page_shift, page_select; + + /* Page select is register 31 for phy address 1 and 22 for + * phy address 2 and 3. Page select is shifted only for + * phy address 1. + */ + if (hw->phy.addr == 1) { + page_shift = IGP_PAGE_SHIFT; + page_select = IGP01E1000_PHY_PAGE_SELECT; + } else { + page_shift = 0; + page_select = BM_PHY_PAGE_SELECT; + } + + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000_write_phy_reg_mdic(hw, page_select, + (page << page_shift)); + if (ret_val) + goto release; + } + + ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, + data); + +release: + hw->phy.ops.release(hw); + return ret_val; } /** - * e1000_check_polarity_82577 - Checks the polarity. + * e1000_read_phy_reg_bm - Read BM PHY register * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data * - * Success returns 0, Failure returns -E1000_ERR_PHY (-2) - * - * Polarity is determined based on the PHY specific status register. + * Acquires semaphore, if necessary, then reads the PHY register at offset + * and storing the retrieved information in data. Release any acquired + * semaphores before exiting. **/ -s32 e1000_check_polarity_82577(struct e1000_hw *hw) +s32 e1000_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) { - struct e1000_phy_info *phy = &hw->phy; s32 ret_val; - u16 data; + u32 page = offset >> IGP_PAGE_SHIFT; - DEBUGFUNC("e1000_check_polarity_82577"); + DEBUGFUNC("e1000_read_phy_reg_bm"); - ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; - if (!ret_val) - phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; + /* Page 800 works differently than the rest so it has its own func */ + if (page == BM_WUC_PAGE) { + ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data, + true, false); + goto release; + } + + hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset); + + if (offset > MAX_PHY_MULTI_PAGE_REG) { + u32 page_shift, page_select; + + /* Page select is register 31 for phy address 1 and 22 for + * phy address 2 and 3. Page select is shifted only for + * phy address 1. + */ + if (hw->phy.addr == 1) { + page_shift = IGP_PAGE_SHIFT; + page_select = IGP01E1000_PHY_PAGE_SELECT; + } else { + page_shift = 0; + page_select = BM_PHY_PAGE_SELECT; + } + + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000_write_phy_reg_mdic(hw, page_select, + (page << page_shift)); + if (ret_val) + goto release; + } + ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, + data); +release: + hw->phy.ops.release(hw); return ret_val; } /** - * e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY + * e1000_read_phy_reg_bm2 - Read BM PHY register * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data * - * Calls the PHY setup function to force speed and duplex. + * Acquires semaphore, if necessary, then reads the PHY register at offset + * and storing the retrieved information in data. Release any acquired + * semaphores before exiting. **/ -s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) +s32 e1000_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) { - struct e1000_phy_info *phy = &hw->phy; s32 ret_val; - u16 phy_data; - bool link; - - DEBUGFUNC("e1000_phy_force_speed_duplex_82577"); - - ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); - if (ret_val) - goto out; + u16 page = (u16)(offset >> IGP_PAGE_SHIFT); - e1000_phy_force_speed_duplex_setup(hw, &phy_data); + DEBUGFUNC("e1000_read_phy_reg_bm2"); - ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) - goto out; - - usec_delay(1); + return ret_val; - if (phy->autoneg_wait_to_complete) { - DEBUGOUT("Waiting for forced speed/duplex link on 82577 phy\n"); + /* Page 800 works differently than the rest so it has its own func */ + if (page == BM_WUC_PAGE) { + ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data, + true, false); + goto release; + } - ret_val = e1000_phy_has_link_generic(hw, - PHY_FORCE_LIMIT, - 100000, - &link); - if (ret_val) - goto out; + hw->phy.addr = 1; - if (!link) - DEBUGOUT("Link taking longer than expected.\n"); + if (offset > MAX_PHY_MULTI_PAGE_REG) { + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, + page); - /* Try once more */ - ret_val = e1000_phy_has_link_generic(hw, - PHY_FORCE_LIMIT, - 100000, - &link); if (ret_val) - goto out; + goto release; } -out: + ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, + data); +release: + hw->phy.ops.release(hw); return ret_val; } /** - * e1000_get_phy_info_82577 - Retrieve I82577 PHY information + * e1000_write_phy_reg_bm2 - Write BM PHY register * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset * - * Read PHY status to determine if link is up. If link is up, then - * set/determine 10base-T extended distance and polarity correction. Read - * PHY port status to determine MDI/MDIx and speed. Based on the speed, - * determine on the cable length, local and remote receiver. + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. **/ -s32 e1000_get_phy_info_82577(struct e1000_hw *hw) +s32 e1000_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) { - struct e1000_phy_info *phy = &hw->phy; s32 ret_val; - u16 data; - bool link; + u16 page = (u16)(offset >> IGP_PAGE_SHIFT); - DEBUGFUNC("e1000_get_phy_info_82577"); + DEBUGFUNC("e1000_write_phy_reg_bm2"); - ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) - goto out; + return ret_val; - if (!link) { - DEBUGOUT("Phy info is only valid if link is up\n"); - ret_val = -E1000_ERR_CONFIG; - goto out; + /* Page 800 works differently than the rest so it has its own func */ + if (page == BM_WUC_PAGE) { + ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data, + false, false); + goto release; } - phy->polarity_correction = TRUE; + hw->phy.addr = 1; - ret_val = e1000_check_polarity_82577(hw); - if (ret_val) - goto out; + if (offset > MAX_PHY_MULTI_PAGE_REG) { + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, + page); - ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); - if (ret_val) - goto out; + if (ret_val) + goto release; + } - phy->is_mdix = (data & I82577_PHY_STATUS2_MDIX) ? TRUE : FALSE; + ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, + data); - if ((data & I82577_PHY_STATUS2_SPEED_MASK) == - I82577_PHY_STATUS2_SPEED_1000MBPS) { - ret_val = hw->phy.ops.get_cable_length(hw); - if (ret_val) - goto out; +release: + hw->phy.ops.release(hw); + return ret_val; +} - ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); - if (ret_val) - goto out; +/** + * e1000_enable_phy_wakeup_reg_access_bm - enable access to BM wakeup registers + * @hw: pointer to the HW structure + * @phy_reg: pointer to store original contents of BM_WUC_ENABLE_REG + * + * Assumes semaphore already acquired and phy_reg points to a valid memory + * address to store contents of the BM_WUC_ENABLE_REG register. + **/ +s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg) +{ + s32 ret_val; + u16 temp; - phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + DEBUGFUNC("e1000_enable_phy_wakeup_reg_access_bm"); - phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; - } else { - phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; - phy->local_rx = e1000_1000t_rx_status_undefined; - phy->remote_rx = e1000_1000t_rx_status_undefined; + if (!phy_reg) + return -E1000_ERR_PARAM; + + /* All page select, port ctrl and wakeup registers use phy address 1 */ + hw->phy.addr = 1; + + /* Select Port Control Registers page */ + ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT)); + if (ret_val) { + DEBUGOUT("Could not set Port Control page\n"); + return ret_val; } -out: - return ret_val; + ret_val = e1000_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg); + if (ret_val) { + DEBUGOUT2("Could not read PHY register %d.%d\n", + BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG); + return ret_val; + } + + /* Enable both PHY wakeup mode and Wakeup register page writes. + * Prevent a power state change by disabling ME and Host PHY wakeup. + */ + temp = *phy_reg; + temp |= BM_WUC_ENABLE_BIT; + temp &= ~(BM_WUC_ME_WU_BIT | BM_WUC_HOST_WU_BIT); + + ret_val = e1000_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, temp); + if (ret_val) { + DEBUGOUT2("Could not write PHY register %d.%d\n", + BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG); + return ret_val; + } + + /* Select Host Wakeup Registers page - caller now able to write + * registers on the Wakeup registers page + */ + return e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT)); } /** - * e1000_get_cable_length_82577 - Determine cable length for 82577 PHY + * e1000_disable_phy_wakeup_reg_access_bm - disable access to BM wakeup regs * @hw: pointer to the HW structure + * @phy_reg: pointer to original contents of BM_WUC_ENABLE_REG * - * Reads the diagnostic status register and verifies result is valid before - * placing it in the phy_cable_length field. + * Restore BM_WUC_ENABLE_REG to its original value. + * + * Assumes semaphore already acquired and *phy_reg is the contents of the + * BM_WUC_ENABLE_REG before register(s) on BM_WUC_PAGE were accessed by + * caller. **/ -s32 e1000_get_cable_length_82577(struct e1000_hw *hw) +s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg) { - struct e1000_phy_info *phy = &hw->phy; s32 ret_val; - u16 phy_data, length; - - DEBUGFUNC("e1000_get_cable_length_82577"); - ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data); - if (ret_val) - goto out; + DEBUGFUNC("e1000_disable_phy_wakeup_reg_access_bm"); - length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >> - I82577_DSTATUS_CABLE_LENGTH_SHIFT; + if (!phy_reg) + return -E1000_ERR_PARAM; - if (length == E1000_CABLE_LENGTH_UNDEFINED) - ret_val = -E1000_ERR_PHY; + /* Select Port Control Registers page */ + ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT)); + if (ret_val) { + DEBUGOUT("Could not set Port Control page\n"); + return ret_val; + } - phy->cable_length = length; + /* Restore 769.17 to its original value */ + ret_val = e1000_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, *phy_reg); + if (ret_val) + DEBUGOUT2("Could not restore PHY register %d.%d\n", + BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG); -out: return ret_val; } + +/** + * e1000_access_phy_wakeup_reg_bm - Read/write BM PHY wakeup register + * @hw: pointer to the HW structure + * @offset: register offset to be read or written + * @data: pointer to the data to read or write + * @read: determines if operation is read or write + * @page_set: BM_WUC_PAGE already set and access enabled + * + * Read the PHY register at offset and store the retrieved information in + * data, or write data to PHY register at offset. Note the procedure to + * access the PHY wakeup registers is different than reading the other PHY + * registers. It works as such: + * 1) Set 769.17.2 (page 769, register 17, bit 2) = 1 + * 2) Set page to 800 for host (801 if we were manageability) + * 3) Write the address using the address opcode (0x11) + * 4) Read or write the data using the data opcode (0x12) + * 5) Restore 769.17.2 to its original value + * + * Steps 1 and 2 are done by e1000_enable_phy_wakeup_reg_access_bm() and + * step 5 is done by e1000_disable_phy_wakeup_reg_access_bm(). + * + * Assumes semaphore is already acquired. When page_set==true, assumes + * the PHY page is set to BM_WUC_PAGE (i.e. a function in the call stack + * is responsible for calls to e1000_[enable|disable]_phy_wakeup_reg_bm()). + **/ +STATIC s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, + u16 *data, bool read, bool page_set) +{ + s32 ret_val; + u16 reg = BM_PHY_REG_NUM(offset); + u16 page = BM_PHY_REG_PAGE(offset); + u16 phy_reg = 0; + + DEBUGFUNC("e1000_access_phy_wakeup_reg_bm"); + + /* Gig must be disabled for MDIO accesses to Host Wakeup reg page */ + if ((hw->mac.type == e1000_pchlan) && + (!(E1000_READ_REG(hw, E1000_PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE))) + DEBUGOUT1("Attempting to access page %d while gig enabled.\n", + page); + + if (!page_set) { + /* Enable access to PHY wakeup registers */ + ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg); + if (ret_val) { + DEBUGOUT("Could not enable PHY wakeup reg access\n"); + return ret_val; + } + } + + DEBUGOUT2("Accessing PHY page %d reg 0x%x\n", page, reg); + + /* Write the Wakeup register page offset value using opcode 0x11 */ + ret_val = e1000_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg); + if (ret_val) { + DEBUGOUT1("Could not write address opcode to page %d\n", page); + return ret_val; + } + + if (read) { + /* Read the Wakeup register page value using opcode 0x12 */ + ret_val = e1000_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE, + data); + } else { + /* Write the Wakeup register page value using opcode 0x12 */ + ret_val = e1000_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE, + *data); + } + + if (ret_val) { + DEBUGOUT2("Could not access PHY reg %d.%d\n", page, reg); + return ret_val; + } + + if (!page_set) + ret_val = e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg); + + return ret_val; +} + +/** + * e1000_power_up_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, restore the link to previous + * settings. + **/ +void e1000_power_up_phy_copper(struct e1000_hw *hw) +{ + u16 mii_reg = 0; + u16 power_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); + mii_reg &= ~MII_CR_POWER_DOWN; + if (hw->phy.type == e1000_phy_i210) { + hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg); + power_reg &= ~GS40G_CS_POWER_DOWN; + hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg); + } + hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); +} + +/** + * e1000_power_down_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, restore the link to previous + * settings. + **/ +void e1000_power_down_phy_copper(struct e1000_hw *hw) +{ + u16 mii_reg = 0; + u16 power_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg); + mii_reg |= MII_CR_POWER_DOWN; + /* i210 Phy requires an additional bit for power up/down */ + if (hw->phy.type == e1000_phy_i210) { + hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg); + power_reg |= GS40G_CS_POWER_DOWN; + hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg); + } + hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg); + msec_delay(1); +} + +/** + * __e1000_read_phy_reg_hv - Read HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary, then reads the PHY register at offset + * and stores the retrieved information in data. Release any acquired + * semaphore before exiting. + **/ +static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked, bool page_set) +{ + s32 ret_val; + u16 page = BM_PHY_REG_PAGE(offset); + u16 reg = BM_PHY_REG_NUM(offset); + u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page); + + DEBUGFUNC("__e1000_read_phy_reg_hv"); + + if (!locked) { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + /* Page 800 works differently than the rest so it has its own func */ + if (page == BM_WUC_PAGE) { + ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data, + true, page_set); + goto out; + } + + if (page > 0 && page < HV_INTC_FC_PAGE_START) { + ret_val = e1000_access_phy_debug_regs_hv(hw, offset, + data, true); + goto out; + } + + if (!page_set) { + if (page == HV_INTC_FC_PAGE_START) + page = 0; + + if (reg > MAX_PHY_MULTI_PAGE_REG) { + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000_set_page_igp(hw, + (page << IGP_PAGE_SHIFT)); + + hw->phy.addr = phy_addr; + + if (ret_val) + goto out; + } + } + + DEBUGOUT3("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page, + page << IGP_PAGE_SHIFT, reg); + + ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, + data); +out: + if (!locked) + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_read_phy_reg_hv - Read HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset and stores + * the retrieved information in data. Release the acquired semaphore + * before exiting. + **/ +s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_hv(hw, offset, data, false, false); +} + +/** + * e1000_read_phy_reg_hv_locked - Read HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired. + **/ +s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_hv(hw, offset, data, true, false); +} + +/** + * e1000_read_phy_reg_page_hv - Read HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired and page already set. + **/ +s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_hv(hw, offset, data, true, true); +} + +/** + * __e1000_write_phy_reg_hv - Write HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * @locked: semaphore has already been acquired or not + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, + bool locked, bool page_set) +{ + s32 ret_val; + u16 page = BM_PHY_REG_PAGE(offset); + u16 reg = BM_PHY_REG_NUM(offset); + u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page); + + DEBUGFUNC("__e1000_write_phy_reg_hv"); + + if (!locked) { + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + } + + /* Page 800 works differently than the rest so it has its own func */ + if (page == BM_WUC_PAGE) { + ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data, + false, page_set); + goto out; + } + + if (page > 0 && page < HV_INTC_FC_PAGE_START) { + ret_val = e1000_access_phy_debug_regs_hv(hw, offset, + &data, false); + goto out; + } + + if (!page_set) { + if (page == HV_INTC_FC_PAGE_START) + page = 0; + + /* Workaround MDIO accesses being disabled after entering IEEE + * Power Down (when bit 11 of the PHY Control register is set) + */ + if ((hw->phy.type == e1000_phy_82578) && + (hw->phy.revision >= 1) && + (hw->phy.addr == 2) && + !(MAX_PHY_REG_ADDRESS & reg) && + (data & (1 << 11))) { + u16 data2 = 0x7EFF; + ret_val = e1000_access_phy_debug_regs_hv(hw, + (1 << 6) | 0x3, + &data2, false); + if (ret_val) + goto out; + } + + if (reg > MAX_PHY_MULTI_PAGE_REG) { + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000_set_page_igp(hw, + (page << IGP_PAGE_SHIFT)); + + hw->phy.addr = phy_addr; + + if (ret_val) + goto out; + } + } + + DEBUGOUT3("writing PHY page %d (or 0x%x shifted) reg 0x%x\n", page, + page << IGP_PAGE_SHIFT, reg); + + ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, + data); + +out: + if (!locked) + hw->phy.ops.release(hw); + + return ret_val; +} + +/** + * e1000_write_phy_reg_hv - Write HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to PHY register at the offset. + * Release the acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_hv(hw, offset, data, false, false); +} + +/** + * e1000_write_phy_reg_hv_locked - Write HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. Assumes semaphore + * already acquired. + **/ +s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_hv(hw, offset, data, true, false); +} + +/** + * e1000_write_phy_reg_page_hv - Write HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. Assumes semaphore + * already acquired and page already set. + **/ +s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_hv(hw, offset, data, true, true); +} + +/** + * e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page + * @page: page to be accessed + **/ +STATIC u32 e1000_get_phy_addr_for_hv_page(u32 page) +{ + u32 phy_addr = 2; + + if (page >= HV_INTC_FC_PAGE_START) + phy_addr = 1; + + return phy_addr; +} + +/** + * e1000_access_phy_debug_regs_hv - Read HV PHY vendor specific high registers + * @hw: pointer to the HW structure + * @offset: register offset to be read or written + * @data: pointer to the data to be read or written + * @read: determines if operation is read or write + * + * Reads the PHY register at offset and stores the retreived information + * in data. Assumes semaphore already acquired. Note that the procedure + * to access these regs uses the address port and data port to read/write. + * These accesses done with PHY address 2 and without using pages. + **/ +STATIC s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, + u16 *data, bool read) +{ + s32 ret_val; + u32 addr_reg; + u32 data_reg; + + DEBUGFUNC("e1000_access_phy_debug_regs_hv"); + + /* This takes care of the difference with desktop vs mobile phy */ + addr_reg = ((hw->phy.type == e1000_phy_82578) ? + I82578_ADDR_REG : I82577_ADDR_REG); + data_reg = addr_reg + 1; + + /* All operations in this function are phy address 2 */ + hw->phy.addr = 2; + + /* masking with 0x3F to remove the page from offset */ + ret_val = e1000_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F); + if (ret_val) { + DEBUGOUT("Could not write the Address Offset port register\n"); + return ret_val; + } + + /* Read or write the data value next */ + if (read) + ret_val = e1000_read_phy_reg_mdic(hw, data_reg, data); + else + ret_val = e1000_write_phy_reg_mdic(hw, data_reg, *data); + + if (ret_val) + DEBUGOUT("Could not access the Data port register\n"); + + return ret_val; +} + +/** + * e1000_link_stall_workaround_hv - Si workaround + * @hw: pointer to the HW structure + * + * This function works around a Si bug where the link partner can get + * a link up indication before the PHY does. If small packets are sent + * by the link partner they can be placed in the packet buffer without + * being properly accounted for by the PHY and will stall preventing + * further packets from being received. The workaround is to clear the + * packet buffer after the PHY detects link up. + **/ +s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) +{ + s32 ret_val = E1000_SUCCESS; + u16 data; + + DEBUGFUNC("e1000_link_stall_workaround_hv"); + + if (hw->phy.type != e1000_phy_82578) + return E1000_SUCCESS; + + /* Do not apply workaround if in PHY loopback bit 14 set */ + hw->phy.ops.read_reg(hw, PHY_CONTROL, &data); + if (data & PHY_CONTROL_LB) + return E1000_SUCCESS; + + /* check if link is up and at 1Gbps */ + ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data); + if (ret_val) + return ret_val; + + data &= (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED | + BM_CS_STATUS_SPEED_MASK); + + if (data != (BM_CS_STATUS_LINK_UP | BM_CS_STATUS_RESOLVED | + BM_CS_STATUS_SPEED_1000)) + return E1000_SUCCESS; + + msec_delay(200); + + /* flush the packets in the fifo buffer */ + ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL, + (HV_MUX_DATA_CTRL_GEN_TO_MAC | + HV_MUX_DATA_CTRL_FORCE_SPEED)); + if (ret_val) + return ret_val; + + return hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL, + HV_MUX_DATA_CTRL_GEN_TO_MAC); +} + +/** + * e1000_check_polarity_82577 - Checks the polarity. + * @hw: pointer to the HW structure + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + * + * Polarity is determined based on the PHY specific status register. + **/ +s32 e1000_check_polarity_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + DEBUGFUNC("e1000_check_polarity_82577"); + + ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); + + if (!ret_val) + phy->cable_polarity = ((data & I82577_PHY_STATUS2_REV_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal); + + return ret_val; +} + +/** + * e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY + * @hw: pointer to the HW structure + * + * Calls the PHY setup function to force speed and duplex. + **/ +s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data; + bool link; + + DEBUGFUNC("e1000_phy_force_speed_duplex_82577"); + + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); + if (ret_val) + return ret_val; + + e1000_phy_force_speed_duplex_setup(hw, &phy_data); + + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); + if (ret_val) + return ret_val; + + usec_delay(1); + + if (phy->autoneg_wait_to_complete) { + DEBUGOUT("Waiting for forced speed/duplex link on 82577 phy\n"); + + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + if (ret_val) + return ret_val; + + if (!link) + DEBUGOUT("Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, + 100000, &link); + } + + return ret_val; +} + +/** + * e1000_get_phy_info_82577 - Retrieve I82577 PHY information + * @hw: pointer to the HW structure + * + * Read PHY status to determine if link is up. If link is up, then + * set/determine 10base-T extended distance and polarity correction. Read + * PHY port status to determine MDI/MDIx and speed. Based on the speed, + * determine on the cable length, local and remote receiver. + **/ +s32 e1000_get_phy_info_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + DEBUGFUNC("e1000_get_phy_info_82577"); + + ret_val = e1000_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + return ret_val; + + if (!link) { + DEBUGOUT("Phy info is only valid if link is up\n"); + return -E1000_ERR_CONFIG; + } + + phy->polarity_correction = true; + + ret_val = e1000_check_polarity_82577(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); + if (ret_val) + return ret_val; + + phy->is_mdix = !!(data & I82577_PHY_STATUS2_MDIX); + + if ((data & I82577_PHY_STATUS2_SPEED_MASK) == + I82577_PHY_STATUS2_SPEED_1000MBPS) { + ret_val = hw->phy.ops.get_cable_length(hw); + if (ret_val) + return ret_val; + + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); + if (ret_val) + return ret_val; + + phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + + phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; + } else { + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + } + + return E1000_SUCCESS; +} + +/** + * e1000_get_cable_length_82577 - Determine cable length for 82577 PHY + * @hw: pointer to the HW structure + * + * Reads the diagnostic status register and verifies result is valid before + * placing it in the phy_cable_length field. + **/ +s32 e1000_get_cable_length_82577(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, length; + + DEBUGFUNC("e1000_get_cable_length_82577"); + + ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data); + if (ret_val) + return ret_val; + + length = ((phy_data & I82577_DSTATUS_CABLE_LENGTH) >> + I82577_DSTATUS_CABLE_LENGTH_SHIFT); + + if (length == E1000_CABLE_LENGTH_UNDEFINED) + return -E1000_ERR_PHY; + + phy->cable_length = length; + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_gs40g - Write GS40G PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore, if necessary, then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data) +{ + s32 ret_val; + u16 page = offset >> GS40G_PAGE_SHIFT; + + DEBUGFUNC("e1000_write_phy_reg_gs40g"); + + offset = offset & GS40G_OFFSET_MASK; + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); + if (ret_val) + goto release; + ret_val = e1000_write_phy_reg_mdic(hw, offset, data); + +release: + hw->phy.ops.release(hw); + return ret_val; +} + +/** + * e1000_read_phy_reg_gs40g - Read GS40G PHY register + * @hw: pointer to the HW structure + * @offset: lower half is register offset to read to + * upper half is page to use. + * @data: data to read at register offset + * + * Acquires semaphore, if necessary, then reads the data in the PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data) +{ + s32 ret_val; + u16 page = offset >> GS40G_PAGE_SHIFT; + + DEBUGFUNC("e1000_read_phy_reg_gs40g"); + + offset = offset & GS40G_OFFSET_MASK; + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = e1000_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page); + if (ret_val) + goto release; + ret_val = e1000_read_phy_reg_mdic(hw, offset, data); + +release: + hw->phy.ops.release(hw); + return ret_val; +} + +/** + * e1000_read_phy_reg_mphy - Read mPHY control register + * @hw: pointer to the HW structure + * @address: address to be read + * @data: pointer to the read data + * + * Reads the mPHY control register in the PHY at offset and stores the + * information read to data. + **/ +s32 e1000_read_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 *data) +{ + u32 mphy_ctrl = 0; + bool locked = false; + bool ready = false; + + DEBUGFUNC("e1000_read_phy_reg_mphy"); + + /* Check if mPHY is ready to read/write operations */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* Check if mPHY access is disabled and enable it if so */ + mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); + if (mphy_ctrl & E1000_MPHY_DIS_ACCESS) { + locked = true; + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + mphy_ctrl |= E1000_MPHY_ENA_ACCESS; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + } + + /* Set the address that we want to read */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* We mask address, because we want to use only current lane */ + mphy_ctrl = (mphy_ctrl & ~E1000_MPHY_ADDRESS_MASK & + ~E1000_MPHY_ADDRESS_FNC_OVERRIDE) | + (address & E1000_MPHY_ADDRESS_MASK); + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + + /* Read data from the address */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + *data = E1000_READ_REG(hw, E1000_MPHY_DATA); + + /* Disable access to mPHY if it was originally disabled */ + if (locked) + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, + E1000_MPHY_DIS_ACCESS); + + return E1000_SUCCESS; +} + +/** + * e1000_write_phy_reg_mphy - Write mPHY control register + * @hw: pointer to the HW structure + * @address: address to write to + * @data: data to write to register at offset + * @line_override: used when we want to use different line than default one + * + * Writes data to mPHY control register. + **/ +s32 e1000_write_phy_reg_mphy(struct e1000_hw *hw, u32 address, u32 data, + bool line_override) +{ + u32 mphy_ctrl = 0; + bool locked = false; + bool ready = false; + + DEBUGFUNC("e1000_write_phy_reg_mphy"); + + /* Check if mPHY is ready to read/write operations */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* Check if mPHY access is disabled and enable it if so */ + mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); + if (mphy_ctrl & E1000_MPHY_DIS_ACCESS) { + locked = true; + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + mphy_ctrl |= E1000_MPHY_ENA_ACCESS; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + } + + /* Set the address that we want to read */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + + /* We mask address, because we want to use only current lane */ + if (line_override) + mphy_ctrl |= E1000_MPHY_ADDRESS_FNC_OVERRIDE; + else + mphy_ctrl &= ~E1000_MPHY_ADDRESS_FNC_OVERRIDE; + mphy_ctrl = (mphy_ctrl & ~E1000_MPHY_ADDRESS_MASK) | + (address & E1000_MPHY_ADDRESS_MASK); + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, mphy_ctrl); + + /* Read data from the address */ + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + E1000_WRITE_REG(hw, E1000_MPHY_DATA, data); + + /* Disable access to mPHY if it was originally disabled */ + if (locked) + ready = e1000_is_mphy_ready(hw); + if (!ready) + return -E1000_ERR_PHY; + E1000_WRITE_REG(hw, E1000_MPHY_ADDR_CTRL, + E1000_MPHY_DIS_ACCESS); + + return E1000_SUCCESS; +} + +/** + * e1000_is_mphy_ready - Check if mPHY control register is not busy + * @hw: pointer to the HW structure + * + * Returns mPHY control register status. + **/ +bool e1000_is_mphy_ready(struct e1000_hw *hw) +{ + u16 retry_count = 0; + u32 mphy_ctrl = 0; + bool ready = false; + + while (retry_count < 2) { + mphy_ctrl = E1000_READ_REG(hw, E1000_MPHY_ADDR_CTRL); + if (mphy_ctrl & E1000_MPHY_BUSY) { + usec_delay(20); + retry_count++; + continue; + } + ready = true; + break; + } + + if (!ready) + DEBUGOUT("ERROR READING mPHY control register, phy is busy.\n"); + + return ready; +}