#include "base/ixgbe_phy.h"
#include "ixgbe_regs.h"
+#include "rte_pmd_ixgbe.h"
+
/*
* High threshold controlling when to start sending XOFF frames. Must be at
* least 8 bytes less than receive packet buffer size. This value is in units
ixgbe_add_rar(dev, addr, 0, 0);
}
+int
+rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf,
+ struct ether_addr *mac_addr)
+{
+ struct ixgbe_hw *hw;
+ struct ixgbe_vf_info *vfinfo;
+ int rar_entry;
+ uint8_t *new_mac = (uint8_t *)(mac_addr);
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+
+ if (vf >= dev_info.max_vfs)
+ return -EINVAL;
+
+ hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ vfinfo = *(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private));
+ rar_entry = hw->mac.num_rar_entries - (vf + 1);
+
+ if (is_valid_assigned_ether_addr((struct ether_addr *)new_mac)) {
+ rte_memcpy(vfinfo[vf].vf_mac_addresses, new_mac,
+ ETHER_ADDR_LEN);
+ return hw->mac.ops.set_rar(hw, rar_entry, new_mac, vf,
+ IXGBE_RAH_AV);
+ }
+ return -EINVAL;
+}
+
static int
ixgbe_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
{
return ret;
}
+int
+rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on)
+{
+ struct ixgbe_hw *hw;
+ struct ixgbe_mac_info *mac;
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+
+ if (vf >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (on > 1)
+ return -EINVAL;
+
+ hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ mac = &hw->mac;
+
+ mac->ops.set_vlan_anti_spoofing(hw, on, vf);
+
+ return 0;
+}
+
+int
+rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on)
+{
+ struct ixgbe_hw *hw;
+ struct ixgbe_mac_info *mac;
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+
+ if (vf >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (on > 1)
+ return -EINVAL;
+
+ hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ mac = &hw->mac;
+ mac->ops.set_mac_anti_spoofing(hw, on, vf);
+
+ return 0;
+}
+
+int
+rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, uint8_t on)
+{
+ struct ixgbe_hw *hw;
+ uint32_t ctrl;
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+
+ if (vf >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (on > 1)
+ return -EINVAL;
+
+ hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_VMVIR(vf));
+ if (on) {
+ ctrl = on;
+ ctrl |= IXGBE_VMVIR_VLANA_DEFAULT;
+ } else {
+ ctrl = 0;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), ctrl);
+
+ return 0;
+}
+
+int
+rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on)
+{
+ struct ixgbe_hw *hw;
+ uint32_t ctrl;
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+
+ if (on > 1)
+ return -EINVAL;
+
+ hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
+ /* enable or disable VMDQ loopback */
+ if (on)
+ ctrl |= IXGBE_PFDTXGSWC_VT_LBEN;
+ else
+ ctrl &= ~IXGBE_PFDTXGSWC_VT_LBEN;
+
+ IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, ctrl);
+
+ return 0;
+}
+
+int
+rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on)
+{
+ struct ixgbe_hw *hw;
+ uint32_t reg_value;
+ int i;
+ int num_queues = (int)(IXGBE_QDE_IDX_MASK >> IXGBE_QDE_IDX_SHIFT);
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+
+ if (on > 1)
+ return -EINVAL;
+
+ hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ for (i = 0; i <= num_queues; i++) {
+ reg_value = IXGBE_QDE_WRITE |
+ (i << IXGBE_QDE_IDX_SHIFT) |
+ (on & IXGBE_QDE_ENABLE);
+ IXGBE_WRITE_REG(hw, IXGBE_QDE, reg_value);
+ }
+
+ return 0;
+}
+
+int
+rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on)
+{
+ struct ixgbe_hw *hw;
+ uint32_t reg_value;
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+
+ /* only support VF's 0 to 63 */
+ if ((vf >= dev_info.max_vfs) || (vf > 63))
+ return -EINVAL;
+
+ if (on > 1)
+ return -EINVAL;
+
+ hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ reg_value = IXGBE_READ_REG(hw, IXGBE_SRRCTL(vf));
+ if (on)
+ reg_value |= IXGBE_SRRCTL_DROP_EN;
+ else
+ reg_value &= ~IXGBE_SRRCTL_DROP_EN;
+
+ IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(vf), reg_value);
+
+ return 0;
+}
+
+int
+rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on)
+{
+ struct rte_eth_dev *dev;
+ struct rte_eth_dev_info dev_info;
+ uint16_t queues_per_pool;
+ uint32_t q;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV);
+
+ dev = &rte_eth_devices[port];
+ rte_eth_dev_info_get(port, &dev_info);
+
+ if (vf >= dev_info.max_vfs)
+ return -EINVAL;
+
+ if (on > 1)
+ return -EINVAL;
+
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_strip_queue_set, -ENOTSUP);
+
+ /* The PF has 128 queue pairs and in SRIOV configuration
+ * those queues will be assigned to VF's, so RXDCTL
+ * registers will be dealing with queues which will be
+ * assigned to VF's.
+ * Let's say we have SRIOV configured with 31 VF's then the
+ * first 124 queues 0-123 will be allocated to VF's and only
+ * the last 4 queues 123-127 will be assigned to the PF.
+ */
+
+ queues_per_pool = dev_info.vmdq_queue_num / dev_info.max_vmdq_pools;
+
+ for (q = 0; q < queues_per_pool; q++)
+ (*dev->dev_ops->vlan_strip_queue_set)(dev,
+ q + vf * queues_per_pool, on);
+ return 0;
+}
+
#define IXGBE_MRCTL_VPME 0x01 /* Virtual Pool Mirroring. */
#define IXGBE_MRCTL_UPME 0x02 /* Uplink Port Mirroring. */
#define IXGBE_MRCTL_DPME 0x04 /* Downlink Port Mirroring. */
--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * @file rte_pmd_ixgbe.h
+ * ixgbe PMD specific functions.
+ *
+ **/
+
+#ifndef _PMD_IXGBE_H_
+#define _PMD_IXGBE_H_
+
+#include <rte_ethdev.h>
+
+/**
+ * Set the VF MAC address.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * VF id.
+ * @param mac_addr
+ * VF MAC address.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if *vf* or *mac_addr* is invalid.
+ */
+int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf,
+ struct ether_addr *mac_addr);
+
+/**
+ * Enable/Disable VF VLAN anti spoofing.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * VF on which to set VLAN anti spoofing.
+ * @param on
+ * 1 - Enable VFs VLAN anti spoofing.
+ * 0 - Disable VFs VLAN anti spoofing.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+
+/**
+ * Enable/Disable VF MAC anti spoofing.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * VF on which to set MAC anti spoofing.
+ * @param on
+ * 1 - Enable VFs MAC anti spoofing.
+ * 0 - Disable VFs MAC anti spoofing.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+
+/**
+ * Enable/Disable vf vlan insert
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * ID specifying VF.
+ * @param on
+ * 1 - Enable VF's vlan insert.
+ * 0 - Disable VF's vlan insert
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, uint8_t on);
+
+/**
+ * Enable/Disable tx loopback
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param on
+ * 1 - Enable tx loopback.
+ * 0 - Disable tx loopback.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on);
+
+/**
+ * set all queues drop enable bit
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param on
+ * 1 - set the queue drop enable bit for all pools.
+ * 0 - reset the queue drop enable bit for all pools.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on);
+
+/**
+ * set drop enable bit in the VF split rx control register
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * ID specifying VF.
+ * @param on
+ * 1 - set the drop enable bit in the split rx control register.
+ * 0 - reset the drop enable bit in the split rx control register.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+
+int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on);
+
+/**
+ * Enable/Disable vf vlan strip for all queues in a pool
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * ID specifying VF.
+ * @param on
+ * 1 - Enable VF's vlan strip on RX queues.
+ * 0 - Disable VF's vlan strip on RX queues.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int
+rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
+#endif /* _PMD_IXGBE_H_ */