From: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Date: Fri, 30 Oct 2015 18:52:39 +0000 (+0100)
Subject: mlx5: support flow control
X-Git-Tag: spdx-start~8262
X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=02d754304391cced3d0701610ce6b7bfdcd15b39;p=dpdk.git

mlx5: support flow control

Like most other device control operations, those are handled by the related
kernel network device through syscalls.

Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
---

diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 5ed828d93a..c454e9396a 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -145,6 +145,8 @@ static const struct eth_dev_ops mlx5_dev_ops = {
 	.tx_queue_setup = mlx5_tx_queue_setup,
 	.rx_queue_release = mlx5_rx_queue_release,
 	.tx_queue_release = mlx5_tx_queue_release,
+	.flow_ctrl_get = mlx5_dev_get_flow_ctrl,
+	.flow_ctrl_set = mlx5_dev_set_flow_ctrl,
 	.mac_addr_remove = mlx5_mac_addr_remove,
 	.mac_addr_add = mlx5_mac_addr_add,
 	.mtu_set = mlx5_dev_set_mtu,
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 1a18326aa0..c6c3d3fcb4 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -166,6 +166,8 @@ int mlx5_dev_configure(struct rte_eth_dev *);
 void mlx5_dev_infos_get(struct rte_eth_dev *, struct rte_eth_dev_info *);
 int mlx5_link_update(struct rte_eth_dev *, int);
 int mlx5_dev_set_mtu(struct rte_eth_dev *, uint16_t);
+int mlx5_dev_get_flow_ctrl(struct rte_eth_dev *, struct rte_eth_fc_conf *);
+int mlx5_dev_set_flow_ctrl(struct rte_eth_dev *, struct rte_eth_fc_conf *);
 int mlx5_ibv_device_to_pci_addr(const struct ibv_device *,
 				struct rte_pci_addr *);
 
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index d01dee519f..5df5fa1029 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -694,6 +694,105 @@ out:
 	return -ret;
 }
 
+/**
+ * DPDK callback to get flow control status.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param[out] fc_conf
+ *   Flow control output buffer.
+ *
+ * @return
+ *   0 on success, negative errno value on failure.
+ */
+int
+mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+	struct priv *priv = dev->data->dev_private;
+	struct ifreq ifr;
+	struct ethtool_pauseparam ethpause = {
+		.cmd = ETHTOOL_GPAUSEPARAM
+	};
+	int ret;
+
+	ifr.ifr_data = &ethpause;
+	priv_lock(priv);
+	if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+		ret = errno;
+		WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
+		     " failed: %s",
+		     strerror(ret));
+		goto out;
+	}
+
+	fc_conf->autoneg = ethpause.autoneg;
+	if (ethpause.rx_pause && ethpause.tx_pause)
+		fc_conf->mode = RTE_FC_FULL;
+	else if (ethpause.rx_pause)
+		fc_conf->mode = RTE_FC_RX_PAUSE;
+	else if (ethpause.tx_pause)
+		fc_conf->mode = RTE_FC_TX_PAUSE;
+	else
+		fc_conf->mode = RTE_FC_NONE;
+	ret = 0;
+
+out:
+	priv_unlock(priv);
+	assert(ret >= 0);
+	return -ret;
+}
+
+/**
+ * DPDK callback to modify flow control parameters.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param[in] fc_conf
+ *   Flow control parameters.
+ *
+ * @return
+ *   0 on success, negative errno value on failure.
+ */
+int
+mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+	struct priv *priv = dev->data->dev_private;
+	struct ifreq ifr;
+	struct ethtool_pauseparam ethpause = {
+		.cmd = ETHTOOL_SPAUSEPARAM
+	};
+	int ret;
+
+	ifr.ifr_data = &ethpause;
+	ethpause.autoneg = fc_conf->autoneg;
+	if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+	    (fc_conf->mode & RTE_FC_RX_PAUSE))
+		ethpause.rx_pause = 1;
+	else
+		ethpause.rx_pause = 0;
+
+	if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+	    (fc_conf->mode & RTE_FC_TX_PAUSE))
+		ethpause.tx_pause = 1;
+	else
+		ethpause.tx_pause = 0;
+
+	priv_lock(priv);
+	if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+		ret = errno;
+		WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
+		     " failed: %s",
+		     strerror(ret));
+		goto out;
+	}
+	ret = 0;
+
+out:
+	priv_unlock(priv);
+	assert(ret >= 0);
+	return -ret;
+}
+
 /**
  * Get PCI information from struct ibv_device.
  *