From: Konstantin Ananyev Date: Thu, 10 Jan 2019 21:09:13 +0000 (+0000) Subject: doc: update ipsec-secgw guide and release notes X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=02dc5b7d58c7;p=dpdk.git doc: update ipsec-secgw guide and release notes Update ipsec-secgw guide and release notes to reflect latest changes. Signed-off-by: Bernard Iremonger Signed-off-by: Konstantin Ananyev Acked-by: Akhil Goyal --- diff --git a/doc/guides/rel_notes/release_19_02.rst b/doc/guides/rel_notes/release_19_02.rst index 6dd4dac1f4..5a46f1acdc 100644 --- a/doc/guides/rel_notes/release_19_02.rst +++ b/doc/guides/rel_notes/release_19_02.rst @@ -123,6 +123,20 @@ New Features See :doc:`../prog_guide/ipsec_lib` for more information. +* **Updated the ipsec-secgw sample application.** + + The ``ipsec-secgw`` sample application has been updated to use the new + ``librte_ipsec`` library also added in this release. + The original functionality of ipsec-secgw is retained, a new command line + parameter ``-l`` has been added to ipsec-secgw to use the IPsec library, + instead of the existing IPsec code in the application. + + The IPsec library does not support all the functionality of the existing + ipsec-secgw application, its is planned to add the outstanding functionality + in future releases. + + See :doc:`../sample_app_ug/ipsec_secgw` for more information. + * **Enabled checksum support in the ISA-L compressdev driver.** Added support for both adler and crc32 checksums in the ISA-L PMD. diff --git a/doc/guides/sample_app_ug/ipsec_secgw.rst b/doc/guides/sample_app_ug/ipsec_secgw.rst index 61638e7335..3d784e7052 100644 --- a/doc/guides/sample_app_ug/ipsec_secgw.rst +++ b/doc/guides/sample_app_ug/ipsec_secgw.rst @@ -76,7 +76,7 @@ Compiling the Application To compile the sample application see :doc:`compiling`. -The application is located in the ``rpsec-secgw`` sub-directory. +The application is located in the ``ipsec-secgw`` sub-directory. #. [Optional] Build the application for debugging: This option adds some extra flags, disables compiler optimizations and @@ -93,6 +93,7 @@ The application has a number of command line options:: ./build/ipsec-secgw [EAL options] -- -p PORTMASK -P -u PORTMASK -j FRAMESIZE + -l -w REPLAY_WINOW_SIZE -e -a --config (port,queue,lcore)[,(port,queue,lcore] --single-sa SAIDX --rxoffload MASK @@ -114,6 +115,18 @@ Where: specified as FRAMESIZE. If an invalid value is provided as FRAMESIZE then the default value 9000 is used. +* ``-l``: enables code-path that uses librte_ipsec. + +* ``-w REPLAY_WINOW_SIZE``: specifies the IPsec sequence number replay window + size for each Security Association (available only with librte_ipsec + code path). + +* ``-e``: enables Security Association extended sequence number processing + (available only with librte_ipsec code path). + +* ``-a``: enables Security Association sequence number atomic behaviour + (available only with librte_ipsec code path). + * ``--config (port,queue,lcore)[,(port,queue,lcore)]``: determines which queues from which ports are mapped to which cores. @@ -225,7 +238,7 @@ accordingly. Configuration File Syntax -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +~~~~~~~~~~~~~~~~~~~~~~~~~ As mention in the overview, the Security Policies are ACL rules. The application parsers the rules specified in the configuration file and @@ -571,6 +584,11 @@ Example SA rules: mode ipv4-tunnel src 172.16.1.5 dst 172.16.2.5 \ type lookaside-protocol-offload port_id 4 + sa in 35 aead_algo aes-128-gcm \ + aead_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \ + mode ipv4-tunnel src 172.16.2.5 dst 172.16.1.5 \ + type inline-crypto-offload port_id 0 + Routing rule syntax ^^^^^^^^^^^^^^^^^^^ @@ -667,3 +685,86 @@ Example Neighbour rules: .. code-block:: console neigh port 0 DE:AD:BE:EF:01:02 + +Test directory +-------------- + +The test directory contains scripts for testing the various encryption +algorithms. + +The purpose of the scripts is to automate ipsec-secgw testing +using another system running linux as a DUT. + +The user must setup the following environment variables: + +* ``SGW_PATH``: path to the ipsec-secgw binary to test. + +* ``REMOTE_HOST``: IP address/hostname of the DUT. + +* ``REMOTE_IFACE``: interface name for the test-port on the DUT. + +* ``ETH_DEV``: ethernet device to be used on the SUT by DPDK ('-w ') + +Also the user can optionally setup: + +* ``SGW_LCORE``: lcore to run ipsec-secgw on (default value is 0) + +* ``CRYPTO_DEV``: crypto device to be used ('-w '). If none specified + appropriate vdevs will be created by the script + +Note that most of the tests require the appropriate crypto PMD/device to be +available. + +Server configuration +~~~~~~~~~~~~~~~~~~~~ + +Two servers are required for the tests, SUT and DUT. + +Make sure the user from the SUT can ssh to the DUT without entering the password. +To enable this feature keys must be setup on the DUT. + +``ssh-keygen`` will make a private & public key pair on the SUT. + +``ssh-copy-id`` @ on the SUT will copy the public +key to the DUT. It will ask for credentials so that it can upload the public key. + +The SUT and DUT are connected through at least 2 NIC ports. + +One NIC port is expected to be managed by linux on both machines and will be +used as a control path. + +The second NIC port (test-port) should be bound to DPDK on the SUT, and should +be managed by linux on the DUT. + +The script starts ``ipsec-secgw`` with 2 NIC devices: ``test-port`` and +``tap vdev``. + +It then configures the local tap interface and the remote interface and IPsec +policies in the following way: + +Traffic going over the test-port in both directions has to be protected by IPsec. + +Traffic going over the TAP port in both directions does not have to be protected. + +i.e: + +DUT OS(NIC1)--(IPsec)-->(NIC1)ipsec-secgw(TAP)--(plain)-->(TAP)SUT OS + +SUT OS(TAP)--(plain)-->(TAP)psec-secgw(NIC1)--(IPsec)-->(NIC1)DUT OS + +It then tries to perform some data transfer using the scheme decribed above. + +usage +~~~~~ + +In the ipsec-secgw/test directory + +to run one test for IPv4 or IPv6 + +/bin/bash linux_test(4|6).sh + +to run all tests for IPv4 or IPv6 + +/bin/bash run_test.sh -4|-6 + +For the list of available modes please refer to run_test.sh.