From: Ajit Khaparde Date: Thu, 24 Oct 2019 07:44:21 +0000 (+0530) Subject: net/bnxt: update HWRM API to version 1.10.1.6 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=04102f2ffc8c2047d22c7f1c47b38cf6d2e331c5;p=dpdk.git net/bnxt: update HWRM API to version 1.10.1.6 Update HWRM API to version 1.10.1.6 Signed-off-by: Ajit Khaparde Signed-off-by: Somnath Kotur Reviewed-by: Kalesh AP --- diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h index c45d0883ac..c2bae0f675 100644 --- a/drivers/net/bnxt/hsi_struct_def_dpdk.h +++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h @@ -80,16 +80,18 @@ struct hwrm_resp_hdr { #define TLV_TYPE_ENGINE_CKV_AUTH_TAG UINT32_C(0x8004) /* Engine CKV - The encrypted data. */ #define TLV_TYPE_ENGINE_CKV_CIPHERTEXT UINT32_C(0x8005) -/* Engine CKV - Supported algorithms. */ -#define TLV_TYPE_ENGINE_CKV_ALGORITHMS UINT32_C(0x8006) +/* Engine CKV - Supported host_algorithms. */ +#define TLV_TYPE_ENGINE_CKV_HOST_ALGORITHMS UINT32_C(0x8006) /* Engine CKV - The Host EC curve name and ECC public key information. */ #define TLV_TYPE_ENGINE_CKV_HOST_ECC_PUBLIC_KEY UINT32_C(0x8007) /* Engine CKV - The ECDSA signature. */ #define TLV_TYPE_ENGINE_CKV_ECDSA_SIGNATURE UINT32_C(0x8008) -/* Engine CKV - The SRT EC curve name and ECC public key information. */ -#define TLV_TYPE_ENGINE_CKV_SRT_ECC_PUBLIC_KEY UINT32_C(0x8009) +/* Engine CKV - The firmware EC curve name and ECC public key information. */ +#define TLV_TYPE_ENGINE_CKV_FW_ECC_PUBLIC_KEY UINT32_C(0x8009) +/* Engine CKV - Supported firmware algorithms. */ +#define TLV_TYPE_ENGINE_CKV_FW_ALGORITHMS UINT32_C(0x800a) #define TLV_TYPE_LAST \ - TLV_TYPE_ENGINE_CKV_SRT_ECC_PUBLIC_KEY + TLV_TYPE_ENGINE_CKV_FW_ALGORITHMS /* tlv (size:64b/8B) */ @@ -319,11 +321,8 @@ struct cmd_nums { #define HWRM_QUEUE_PRI2COS_CFG UINT32_C(0x38) #define HWRM_QUEUE_COS2BW_QCFG UINT32_C(0x39) #define HWRM_QUEUE_COS2BW_CFG UINT32_C(0x3a) - /* Experimental */ #define HWRM_QUEUE_DSCP_QCAPS UINT32_C(0x3b) - /* Experimental */ #define HWRM_QUEUE_DSCP2PRI_QCFG UINT32_C(0x3c) - /* Experimental */ #define HWRM_QUEUE_DSCP2PRI_CFG UINT32_C(0x3d) #define HWRM_VNIC_ALLOC UINT32_C(0x40) #define HWRM_VNIC_FREE UINT32_C(0x41) @@ -351,6 +350,9 @@ struct cmd_nums { #define HWRM_RESERVED6 UINT32_C(0x65) #define HWRM_VNIC_RSS_COS_LB_CTX_ALLOC UINT32_C(0x70) #define HWRM_VNIC_RSS_COS_LB_CTX_FREE UINT32_C(0x71) + #define HWRM_QUEUE_MPLS_QCAPS UINT32_C(0x80) + #define HWRM_QUEUE_MPLSTC2PRI_QCFG UINT32_C(0x81) + #define HWRM_QUEUE_MPLSTC2PRI_CFG UINT32_C(0x82) #define HWRM_CFA_L2_FILTER_ALLOC UINT32_C(0x90) #define HWRM_CFA_L2_FILTER_FREE UINT32_C(0x91) #define HWRM_CFA_L2_FILTER_CFG UINT32_C(0x92) @@ -382,11 +384,13 @@ struct cmd_nums { #define HWRM_PORT_QSTATS_EXT UINT32_C(0xb4) #define HWRM_PORT_PHY_MDIO_WRITE UINT32_C(0xb5) #define HWRM_PORT_PHY_MDIO_READ UINT32_C(0xb6) + #define HWRM_PORT_PHY_MDIO_BUS_ACQUIRE UINT32_C(0xb7) + #define HWRM_PORT_PHY_MDIO_BUS_RELEASE UINT32_C(0xb8) #define HWRM_FW_RESET UINT32_C(0xc0) #define HWRM_FW_QSTATUS UINT32_C(0xc1) #define HWRM_FW_HEALTH_CHECK UINT32_C(0xc2) #define HWRM_FW_SYNC UINT32_C(0xc3) - #define HWRM_FW_STATE_BUFFER_QCAPS UINT32_C(0xc4) + #define HWRM_FW_STATE_QCAPS UINT32_C(0xc4) #define HWRM_FW_STATE_QUIESCE UINT32_C(0xc5) #define HWRM_FW_STATE_BACKUP UINT32_C(0xc6) #define HWRM_FW_STATE_RESTORE UINT32_C(0xc7) @@ -407,7 +411,14 @@ struct cmd_nums { #define HWRM_OEM_CMD UINT32_C(0xd4) /* Tells the fw to run PRBS test on a given port and lane. */ #define HWRM_PORT_PRBS_TEST UINT32_C(0xd5) + #define HWRM_PORT_SFP_SIDEBAND_CFG UINT32_C(0xd6) + #define HWRM_PORT_SFP_SIDEBAND_QCFG UINT32_C(0xd7) + #define HWRM_FW_STATE_UNQUIESCE UINT32_C(0xd8) + /* Tells the fw to collect dsc dump on a given port and lane. */ + #define HWRM_PORT_DSC_DUMP UINT32_C(0xd9) #define HWRM_TEMP_MONITOR_QUERY UINT32_C(0xe0) + #define HWRM_REG_POWER_QUERY UINT32_C(0xe1) + #define HWRM_CORE_FREQUENCY_QUERY UINT32_C(0xe2) #define HWRM_WOL_FILTER_ALLOC UINT32_C(0xf0) #define HWRM_WOL_FILTER_FREE UINT32_C(0xf1) #define HWRM_WOL_FILTER_QCFG UINT32_C(0xf2) @@ -561,6 +572,8 @@ struct cmd_nums { #define HWRM_ENGINE_STATS_CLEAR UINT32_C(0x156) /* Engine - Query the statistics accumulator for an Engine. */ #define HWRM_ENGINE_STATS_QUERY UINT32_C(0x157) + /* Engine - Query statistics counters for continuous errors from all CDDIP Engines. */ + #define HWRM_ENGINE_STATS_QUERY_CONTINUOUS_ERROR UINT32_C(0x158) /* Engine - Allocate an Engine RQ. */ #define HWRM_ENGINE_RQ_ALLOC UINT32_C(0x15e) /* Engine - Free an Engine RQ. */ @@ -731,7 +744,7 @@ struct ret_codes { #define HWRM_ERR_CODE_HOT_RESET_FAIL UINT32_C(0xb) /* * This error code is only reported by the firmware when during - * flow allocation when a requeest for a flow counter fails because + * flow allocation when a request for a flow counter fails because * the number of flow counters are exhausted. */ #define HWRM_ERR_CODE_NO_FLOW_COUNTER_DURING_ALLOC UINT32_C(0xc) @@ -752,11 +765,16 @@ struct ret_codes { * internal error. */ #define HWRM_ERR_CODE_HWRM_ERROR UINT32_C(0xf) + /* + * Firmware is unable to service the request at the present time. Caller + * may try again later. + */ + #define HWRM_ERR_CODE_BUSY UINT32_C(0x10) /* * This value indicates that the HWRM response is in TLV format and * should be interpreted as one or more TLVs starting with the - * hwrm_resp_hdr TLV. This value is not an indicatation of any error - * by itself, just an indicatation that the response should be parsed + * hwrm_resp_hdr TLV. This value is not an indication of any error + * by itself, just an indication that the response should be parsed * as TLV and the actual error code will be in the hwrm_resp_hdr TLV. */ #define HWRM_ERR_CODE_TLV_ENCAPSULATED_RESPONSE UINT32_C(0x8000) @@ -837,10 +855,10 @@ struct hwrm_err_output { #define HWRM_TARGET_ID_TOOLS 0xFFFD #define HWRM_VERSION_MAJOR 1 #define HWRM_VERSION_MINOR 10 -#define HWRM_VERSION_UPDATE 0 +#define HWRM_VERSION_UPDATE 1 /* non-zero means beta version */ -#define HWRM_VERSION_RSVD 91 -#define HWRM_VERSION_STR "1.10.0.91" +#define HWRM_VERSION_RSVD 6 +#define HWRM_VERSION_STR "1.10.1.6" /**************** * hwrm_ver_get * @@ -1395,12 +1413,12 @@ struct bd_base { #define BD_BASE_TYPE_TX_BD_SHORT UINT32_C(0x0) /* * Indicates that this BD is 1BB long and is an empty - * TX BD. Not valid for use by the driver. + * TX BD. Not valid for use by the driver. */ #define BD_BASE_TYPE_TX_BD_EMPTY UINT32_C(0x1) /* * Indicates that this BD is 16B long and is an RX Producer - * (ie. empty) buffer descriptor. + * (i.e. empty) buffer descriptor. */ #define BD_BASE_TYPE_RX_PROD_PKT UINT32_C(0x4) /* @@ -1454,7 +1472,7 @@ struct tx_bd_short { #define TX_BD_SHORT_FLAGS_SFT 6 /* * If set to 1, the packet ends with the data in the buffer - * pointed to by this descriptor. This flag must be + * pointed to by this descriptor. This flag must be * valid on every BD. */ #define TX_BD_SHORT_FLAGS_PACKET_END UINT32_C(0x40) @@ -1472,9 +1490,9 @@ struct tx_bd_short { * This value indicates how many 16B BD locations are consumed * in the ring by this packet. * A value of 1 indicates that this BD is the only BD (and that - * the it is a short BD). A value + * it is a short BD). A value * of 3 indicates either 3 short BDs or 1 long BD and one short - * BD in the packet. A value of 0 indicates + * BD in the packet. A value of 0 indicates * that there are 32 BD locations in the packet (the maximum). * * This field is valid only on the first BD of a packet. @@ -1562,7 +1580,7 @@ struct tx_bd_long { #define TX_BD_LONG_FLAGS_SFT 6 /* * If set to 1, the packet ends with the data in the buffer - * pointed to by this descriptor. This flag must be + * pointed to by this descriptor. This flag must be * valid on every BD. */ #define TX_BD_LONG_FLAGS_PACKET_END UINT32_C(0x40) @@ -1580,9 +1598,9 @@ struct tx_bd_long { * This value indicates how many 16B BD locations are consumed * in the ring by this packet. * A value of 1 indicates that this BD is the only BD (and that - * the it is a short BD). A value + * it is a short BD). A value * of 3 indicates either 3 short BDs or 1 long BD and one short - * BD in the packet. A value of 0 indicates + * BD in the packet. A value of 0 indicates * that there are 32 BD locations in the packet (the maximum). * * This field is valid only on the first BD of a packet. @@ -1663,7 +1681,7 @@ struct tx_bd_long_hi { */ #define TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM UINT32_C(0x1) /* - * If set to 1, the controller replaces the IP checksum of the + * If set to 1, the controller replaces the IP checksum of the * normal packets, or the inner IP checksum of the encapsulated * packets with the hardware calculated IP checksum for the * packet associated with this descriptor. @@ -1677,9 +1695,9 @@ struct tx_bd_long_hi { * * This bit must be valid on the first BD of a packet. * - * Packet must be 64B or longer when this flag is set. It is not + * Packet must be 64B or longer when this flag is set. It is not * useful to use this bit with any form of TX offload such as - * CSO or LSO. The intent is that the packet from the host already + * CSO or LSO. The intent is that the packet from the host already * has a valid Ethernet CRC on the packet. */ #define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4) @@ -1708,9 +1726,9 @@ struct tx_bd_long_hi { */ #define TX_BD_LONG_LFLAGS_T_IP_CHKSUM UINT32_C(0x10) /* - * If set to 1, the device will treat this packet with LSO(Large + * If set to 1, the device will treat this packet with LSO(Large * Send Offload) processing for both normal or encapsulated - * packets, which is a form of TCP segmentation. When this bit + * packets, which is a form of TCP segmentation. When this bit * is 1, the hdr_size and mss fields must be valid. The driver * doesn't need to set t_ip_chksum, ip_chksum, and tcp_udp_chksum * flags since the controller will replace the appropriate @@ -1743,19 +1761,19 @@ struct tx_bd_long_hi { #define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80) /* * If set to '1', then the RoCE ICRC will be appended to the - * packet. Packet must be a valid RoCE format packet. + * packet. Packet must be a valid RoCE format packet. */ #define TX_BD_LONG_LFLAGS_ROCE_CRC UINT32_C(0x100) /* * If set to '1', then the FCoE CRC will be appended to the - * packet. Packet must be a valid FCoE format packet. + * packet. Packet must be a valid FCoE format packet. */ #define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200) uint16_t hdr_size; /* * When LSO is '1', this field must contain the offset of the * TCP payload from the beginning of the packet in as - * 16b words. In case of encapsulated/tunneling packet, this field + * 16b words. In case of encapsulated/tunneling packet, this field * contains the offset of the inner TCP payload from beginning of the * packet as 16-bit words. * @@ -1862,7 +1880,7 @@ struct tx_bd_long_inline { #define TX_BD_LONG_INLINE_FLAGS_SFT 6 /* * If set to 1, the packet ends with the data in the buffer - * pointed to by this descriptor. This flag must be + * pointed to by this descriptor. This flag must be * valid on every BD. */ #define TX_BD_LONG_INLINE_FLAGS_PACKET_END UINT32_C(0x40) @@ -1967,12 +1985,12 @@ struct tx_bd_long_inline { #define TX_BD_LONG_INLINE_LFLAGS_T_IPID UINT32_C(0x80) /* * If set to '1', then the RoCE ICRC will be appended to the - * packet. Packet must be a valid RoCE format packet. + * packet. Packet must be a valid RoCE format packet. */ #define TX_BD_LONG_INLINE_LFLAGS_ROCE_CRC UINT32_C(0x100) /* * If set to '1', then the FCoE CRC will be appended to the - * packet. Packet must be a valid FCoE format packet. + * packet. Packet must be a valid FCoE format packet. */ #define TX_BD_LONG_INLINE_LFLAGS_FCOE_CRC UINT32_C(0x200) uint16_t unused2; @@ -2055,7 +2073,7 @@ struct tx_bd_empty { #define TX_BD_EMPTY_TYPE_SFT 0 /* * Indicates that this BD is 1BB long and is an empty - * TX BD. Not valid for use by the driver. + * TX BD. Not valid for use by the driver. */ #define TX_BD_EMPTY_TYPE_TX_BD_EMPTY UINT32_C(0x1) #define TX_BD_EMPTY_TYPE_LAST TX_BD_EMPTY_TYPE_TX_BD_EMPTY @@ -2074,7 +2092,7 @@ struct rx_prod_pkt_bd { #define RX_PROD_PKT_BD_TYPE_SFT 0 /* * Indicates that this BD is 16B long and is an RX Producer - * (ie. empty) buffer descriptor. + * (i.e. empty) buffer descriptor. */ #define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT UINT32_C(0x4) #define RX_PROD_PKT_BD_TYPE_LAST \ @@ -2083,7 +2101,7 @@ struct rx_prod_pkt_bd { #define RX_PROD_PKT_BD_FLAGS_SFT 6 /* * If set to 1, the packet will be placed at the address plus - * 2B. The 2 Bytes of padding will be written as zero. + * 2B. The 2 Bytes of padding will be written as zero. */ #define RX_PROD_PKT_BD_FLAGS_SOP_PAD UINT32_C(0x40) /* @@ -2093,9 +2111,9 @@ struct rx_prod_pkt_bd { #define RX_PROD_PKT_BD_FLAGS_EOP_PAD UINT32_C(0x80) /* * This value is the number of additional buffers in the ring that - * describe the buffer space to be consumed for the this packet. + * describe the buffer space to be consumed for this packet. * If the value is zero, then the packet must fit within the - * space described by this BD. If this value is 1 or more, it + * space described by this BD. If this value is 1 or more, it * indicates how many additional "buffer" BDs are in the ring * immediately following this BD to be used for the same * network packet. @@ -2118,7 +2136,7 @@ struct rx_prod_pkt_bd { uint32_t opaque; /* * This is the host physical address where data for the packet may - * by placed in host memory. + * be placed in host memory. */ uint64_t address; } __attribute__((packed)); @@ -2147,7 +2165,7 @@ struct rx_prod_bfr_bd { uint32_t opaque; /* * This is the host physical address where data for the packet may - * by placed in host memory. + * be placed in host memory. */ uint64_t address; } __attribute__((packed)); @@ -2186,7 +2204,7 @@ struct rx_prod_agg_bd { uint32_t opaque; /* * This is the host physical address where data for the packet may - * by placed in host memory. + * be placed in host memory. */ uint64_t address; } __attribute__((packed)); @@ -2197,15 +2215,15 @@ struct cmpl_base { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define CMPL_BASE_TYPE_MASK UINT32_C(0x3f) #define CMPL_BASE_TYPE_SFT 0 /* * TX L2 completion: - * Completion of TX packet. Length = 16B + * Completion of TX packet. Length = 16B */ #define CMPL_BASE_TYPE_TX_L2 UINT32_C(0x0) /* @@ -2216,7 +2234,7 @@ struct cmpl_base { /* * RX Aggregation Buffer completion : * Completion of an L2 aggregation buffer in support of - * TPA, HDS, or Jumbo packet completion. Length = 16B + * TPA, HDS, or Jumbo packet completion. Length = 16B */ #define CMPL_BASE_TYPE_RX_AGG UINT32_C(0x12) /* @@ -2265,8 +2283,8 @@ struct cmpl_base { uint32_t info2; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ uint32_t info3_v; #define CMPL_BASE_V UINT32_C(0x1) @@ -2282,15 +2300,15 @@ struct tx_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define TX_CMPL_TYPE_MASK UINT32_C(0x3f) #define TX_CMPL_TYPE_SFT 0 /* * TX L2 completion: - * Completion of TX packet. Length = 16B + * Completion of TX packet. Length = 16B */ #define TX_CMPL_TYPE_TX_L2 UINT32_C(0x0) #define TX_CMPL_TYPE_LAST TX_CMPL_TYPE_TX_L2 @@ -2298,14 +2316,14 @@ struct tx_cmpl { #define TX_CMPL_FLAGS_SFT 6 /* * When this bit is '1', it indicates a packet that has an - * error of some type. Type of error is indicated in + * error of some type. Type of error is indicated in * error_flags. */ #define TX_CMPL_FLAGS_ERROR UINT32_C(0x40) /* * When this bit is '1', it indicates that the packet completed * was transmitted using the push acceleration data provided - * by the driver. When this bit is '0', it indicates that the + * by the driver. When this bit is '0', it indicates that the * packet had not push acceleration data written or was executed * as a normal packet even though push data was provided. */ @@ -2320,8 +2338,8 @@ struct tx_cmpl { uint16_t errors_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define TX_CMPL_V UINT32_C(0x1) #define TX_CMPL_ERRORS_MASK UINT32_C(0xfffe) @@ -2343,7 +2361,7 @@ struct tx_cmpl { TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT /* * When this bit is '1', it indicates that the length of - * the packet was zero. No packet was transmitted. + * the packet was zero. No packet was transmitted. */ #define TX_CMPL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10) /* @@ -2360,7 +2378,7 @@ struct tx_cmpl { #define TX_CMPL_ERRORS_DMA_ERROR UINT32_C(0x40) /* * When this bit is '1', it indicates that the packet was longer - * than indicated by the hint. No packet was transmitted. + * than indicated by the hint. No packet was transmitted. */ #define TX_CMPL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80) /* @@ -2381,8 +2399,8 @@ struct rx_pkt_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define RX_PKT_CMPL_TYPE_MASK UINT32_C(0x3f) @@ -2397,7 +2415,7 @@ struct rx_pkt_cmpl { #define RX_PKT_CMPL_FLAGS_SFT 6 /* * When this bit is '1', it indicates a packet that has an - * error of some type. Type of error is indicated in + * error of some type. Type of error is indicated in * error_flags. */ #define RX_PKT_CMPL_FLAGS_ERROR UINT32_C(0x40) @@ -2498,9 +2516,9 @@ struct rx_pkt_cmpl { RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP /* * This is the length of the data for the packet stored in the - * buffer(s) identified by the opaque value. This includes - * the packet BD and any associated buffer BDs. This does not include - * the the length of any data places in aggregation BDs. + * buffer(s) identified by the opaque value. This includes + * the packet BD and any associated buffer BDs. This does not include + * the length of any data places in aggregation BDs. */ uint16_t len; /* @@ -2511,8 +2529,8 @@ struct rx_pkt_cmpl { uint8_t agg_bufs_v1; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_PKT_CMPL_V1 UINT32_C(0x1) /* @@ -2527,7 +2545,7 @@ struct rx_pkt_cmpl { #define RX_PKT_CMPL_UNUSED1_MASK UINT32_C(0xc0) #define RX_PKT_CMPL_UNUSED1_SFT 6 /* - * This is the RSS hash type for the packet. The value is packed + * This is the RSS hash type for the packet. The value is packed * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}. * * The value of tuple_extrac_op provides the information about @@ -2558,7 +2576,7 @@ struct rx_pkt_cmpl { uint8_t rss_hash_type; /* * This value indicates the offset in bytes from the beginning of the packet - * where the inner payload starts. This value is valid for TCP, UDP, + * where the inner payload starts. This value is valid for TCP, UDP, * FCoE, and RoCE packets. * * A value of zero indicates that header is 256B into the packet. @@ -2604,7 +2622,7 @@ struct rx_pkt_cmpl_hi { /* This value indicates what format the metadata field is. */ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0) #define RX_PKT_CMPL_FLAGS2_META_FORMAT_SFT 4 - /* No metadata informtaion. Value is zero. */ + /* No metadata information. Value is zero. */ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_NONE \ (UINT32_C(0x0) << 4) /* @@ -2623,7 +2641,7 @@ struct rx_pkt_cmpl_hi { * - VXLAN = VNI[23:0] -> VXLAN Network ID * - Geneve (NGE) = VNI[23:0] a-> Virtual Network Identifier. * - NVGRE = TNI[23:0] -> Tenant Network ID - * - GRE = KEY[31:0 -> key fieled with bit mask. zero if K = 0 + * - GRE = KEY[31:0] -> key field with bit mask. zero if K = 0 * - IPV4 = 0 (not populated) * - IPV6 = Flow Label[19:0] * - PPPoE = sessionID[15:0] @@ -2653,7 +2671,7 @@ struct rx_pkt_cmpl_hi { RX_PKT_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET /* * This field indicates the IP type for the inner-most IP header. - * A value of '0' indicates IPv4. A value of '1' indicates IPv6. + * A value of '0' indicates IPv4. A value of '1' indicates IPv6. * This value is only valid if itype indicates a packet * with an IP header. */ @@ -2697,8 +2715,8 @@ struct rx_pkt_cmpl_hi { uint16_t errors_v2; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_PKT_CMPL_V2 \ UINT32_C(0x1) @@ -2708,7 +2726,7 @@ struct rx_pkt_cmpl_hi { /* * This error indicates that there was some sort of problem with * the BDs for the packet that was found after part of the - * packet was already placed. The packet should be treated as + * packet was already placed. The packet should be treated as * invalid. */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_MASK \ @@ -2721,7 +2739,7 @@ struct rx_pkt_cmpl_hi { * Did Not Fit: * Packet did not fit into packet buffer provided. * For regular placement, this means the packet did not fit - * in the buffer provided. For HDS and jumbo placement, this + * in the buffer provided. For HDS and jumbo placement, this * means that the packet could not be placed into 7 physical * buffers or less. */ @@ -2774,7 +2792,7 @@ struct rx_pkt_cmpl_hi { UINT32_C(0x80) /* * This indicates that there was a CRC error on either an FCoE - * or RoCE packet. The itype indicates the packet type. + * or RoCE packet. The itype indicates the packet type. */ #define RX_PKT_CMPL_ERRORS_CRC_ERROR \ UINT32_C(0x100) @@ -2912,7 +2930,7 @@ struct rx_pkt_cmpl_hi { * This value holds the reordering sequence number for the packet. * If the reordering sequence is not valid, then this value is zero. * The reordering domain for the packet is in the bottom 8 to 10b of - * the rss_hash value. The bottom 20b of this value contain the + * the rss_hash value. The bottom 20b of this value contain the * ordering domain value for the packet. */ #define RX_PKT_CMPL_REORDER_MASK UINT32_C(0xffffff) @@ -2929,8 +2947,8 @@ struct rx_tpa_start_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define RX_TPA_START_CMPL_TYPE_MASK UINT32_C(0x3f) @@ -2952,9 +2970,9 @@ struct rx_tpa_start_cmpl { #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT 7 /* * Jumbo: - * TPA Packet was placed using jumbo algorithm. This means + * TPA Packet was placed using jumbo algorithm. This means * that the first buffer will be filled with data before - * moving to aggregation buffers. Each aggregation buffer + * moving to aggregation buffers. Each aggregation buffer * will be filled before moving to the next aggregation * buffer. */ @@ -3020,19 +3038,19 @@ struct rx_tpa_start_cmpl { uint32_t opaque; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ uint8_t v1; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_TPA_START_CMPL_V1 UINT32_C(0x1) #define RX_TPA_START_CMPL_LAST RX_TPA_START_CMPL_V1 /* - * This is the RSS hash type for the packet. The value is packed + * This is the RSS hash type for the packet. The value is packed * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}. * * The value of tuple_extrac_op provides the information about @@ -3063,7 +3081,7 @@ struct rx_tpa_start_cmpl { uint8_t rss_hash_type; /* * This is the aggregation ID that the completion is associated - * with. Use this number to correlate the TPA start completion + * with. Use this number to correlate the TPA start completion * with the TPA end completion. */ uint16_t agg_id; @@ -3072,7 +3090,7 @@ struct rx_tpa_start_cmpl { #define RX_TPA_START_CMPL_UNUSED2_SFT 0 /* * This is the aggregation ID that the completion is associated - * with. Use this number to correlate the TPA start completion + * with. Use this number to correlate the TPA start completion * with the TPA end completion. */ #define RX_TPA_START_CMPL_AGG_ID_MASK UINT32_C(0xfe00) @@ -3120,7 +3138,7 @@ struct rx_tpa_start_cmpl_hi { /* This value indicates what format the metadata field is. */ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0) #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4 - /* No metadata information. Value is zero. */ + /* No metadata information. Value is zero. */ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE \ (UINT32_C(0x0) << 4) /* @@ -3136,7 +3154,7 @@ struct rx_tpa_start_cmpl_hi { RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN /* * This field indicates the IP type for the inner-most IP header. - * A value of '0' indicates IPv4. A value of '1' indicates IPv6. + * A value of '0' indicates IPv4. A value of '1' indicates IPv6. */ #define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100) /* @@ -3158,8 +3176,8 @@ struct rx_tpa_start_cmpl_hi { uint16_t v2; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_TPA_START_CMPL_V2 UINT32_C(0x1) /* @@ -3175,7 +3193,7 @@ struct rx_tpa_start_cmpl_hi { uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset; /* * This is the offset from the beginning of the packet in bytes for - * the outer L3 header. If there is no outer L3 header, then this + * the outer L3 header. If there is no outer L3 header, then this * value is zero. */ #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff) @@ -3211,8 +3229,8 @@ struct rx_tpa_end_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define RX_TPA_END_CMPL_TYPE_MASK UINT32_C(0x3f) @@ -3229,7 +3247,7 @@ struct rx_tpa_end_cmpl { #define RX_TPA_END_CMPL_FLAGS_SFT 6 /* * When this bit is '1', it indicates a packet that has an - * error of some type. Type of error is indicated in + * error of some type. Type of error is indicated in * error_flags. */ #define RX_TPA_END_CMPL_FLAGS_ERROR UINT32_C(0x40) @@ -3238,9 +3256,9 @@ struct rx_tpa_end_cmpl { #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT 7 /* * Jumbo: - * TPA Packet was placed using jumbo algorithm. This means + * TPA Packet was placed using jumbo algorithm. This means * that the first buffer will be filled with data before - * moving to aggregation buffers. Each aggregation buffer + * moving to aggregation buffers. Each aggregation buffer * will be filled before moving to the next aggregation * buffer. */ @@ -3283,7 +3301,7 @@ struct rx_tpa_end_cmpl { * This value indicates what the inner packet determined for the * packet was. * - 2 TCP Packet - * Indicates that the packet was IP and TCP. This indicates + * Indicates that the packet was IP and TCP. This indicates * that the ip_cs field is valid and that the tcp_udp_cs * field is valid and contains the TCP checksum. * This also indicates that the payload_offset field is valid. @@ -3303,14 +3321,14 @@ struct rx_tpa_end_cmpl { uint32_t opaque; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ uint8_t agg_bufs_v1; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_TPA_END_CMPL_V1 UINT32_C(0x1) /* @@ -3326,7 +3344,7 @@ struct rx_tpa_end_cmpl { uint8_t tpa_segs; /* * This value indicates the offset in bytes from the beginning of the packet - * where the inner payload starts. This value is valid for TCP, UDP, + * where the inner payload starts. This value is valid for TCP, UDP, * FCoE, and RoCE packets. * * A value of zero indicates an offset of 256 bytes. @@ -3337,7 +3355,7 @@ struct rx_tpa_end_cmpl { #define RX_TPA_END_CMPL_UNUSED2 UINT32_C(0x1) /* * This is the aggregation ID that the completion is associated - * with. Use this number to correlate the TPA start completion + * with. Use this number to correlate the TPA start completion * with the TPA end completion. */ #define RX_TPA_END_CMPL_AGG_ID_MASK UINT32_C(0xfe) @@ -3351,8 +3369,8 @@ struct rx_tpa_end_cmpl { * For GRO packets, this field is zero except for the following * sub-fields. * - tsdelta[31] - * Timestamp present indication. When '0', no Timestamp - * option is in the packet. When '1', then a Timestamp + * Timestamp present indication. When '0', no Timestamp + * option is in the packet. When '1', then a Timestamp * option is present in the packet. */ uint32_t tsdelta; @@ -3374,13 +3392,13 @@ struct rx_tpa_end_cmpl_hi { #define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf) #define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0 /* - * This value is the valid when TPA completion is active. It + * This value is the valid when TPA completion is active. It * indicates the length of the longest segment of the TPA operation * for LRO mode and the length of the first segment in GRO mode. * * This value may be used by GRO software to re-construct the original - * packet stream from the TPA packet. This is the length of all - * but the last segment for GRO. In LRO mode this value may be used + * packet stream from the TPA packet. This is the length of all + * but the last segment for GRO. In LRO mode this value may be used * to indicate MSS size to the stack. */ uint16_t tpa_seg_len; @@ -3389,8 +3407,8 @@ struct rx_tpa_end_cmpl_hi { uint16_t errors_v2; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_TPA_END_CMPL_V2 UINT32_C(0x1) #define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe) @@ -3398,14 +3416,14 @@ struct rx_tpa_end_cmpl_hi { /* * This error indicates that there was some sort of problem with * the BDs for the packet that was found after part of the - * packet was already placed. The packet should be treated as + * packet was already placed. The packet should be treated as * invalid. */ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1 /* * This error occurs when there is a fatal HW problem in - * the chip only. It indicates that there were not + * the chip only. It indicates that there were not * BDs on chip but that there was adequate reservation. * provided by the TPA block. */ @@ -3414,7 +3432,7 @@ struct rx_tpa_end_cmpl_hi { /* * This error occurs when TPA block was not configured to * reserve adequate BDs for TPA operations on this RX - * ring. All data for the TPA operation was not placed. + * ring. All data for the TPA operation was not placed. * * This error can also be generated when the number of * segments is not programmed correctly in TPA and the @@ -3444,8 +3462,8 @@ struct rx_tpa_v2_start_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define RX_TPA_V2_START_CMPL_TYPE_MASK \ @@ -3472,9 +3490,9 @@ struct rx_tpa_v2_start_cmpl { #define RX_TPA_V2_START_CMPL_FLAGS_PLACEMENT_SFT 7 /* * Jumbo: - * TPA Packet was placed using jumbo algorithm. This means + * TPA Packet was placed using jumbo algorithm. This means * that the first buffer will be filled with data before - * moving to aggregation buffers. Each aggregation buffer + * moving to aggregation buffers. Each aggregation buffer * will be filled before moving to the next aggregation * buffer. */ @@ -3551,19 +3569,19 @@ struct rx_tpa_v2_start_cmpl { uint32_t opaque; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ uint8_t v1; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_TPA_V2_START_CMPL_V1 UINT32_C(0x1) #define RX_TPA_V2_START_CMPL_LAST RX_TPA_V2_START_CMPL_V1 /* - * This is the RSS hash type for the packet. The value is packed + * This is the RSS hash type for the packet. The value is packed * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}. * * The value of tuple_extrac_op provides the information about @@ -3594,7 +3612,7 @@ struct rx_tpa_v2_start_cmpl { uint8_t rss_hash_type; /* * This is the aggregation ID that the completion is associated - * with. Use this number to correlate the TPA start completion + * with. Use this number to correlate the TPA start completion * with the TPA end completion. */ uint16_t agg_id; @@ -3646,7 +3664,7 @@ struct rx_tpa_v2_start_cmpl_hi { #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_MASK \ UINT32_C(0xf0) #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_SFT 4 - /* No metadata informtaion. Value is zero. */ + /* No metadata informtaion. Value is zero. */ #define RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_NONE \ (UINT32_C(0x0) << 4) /* @@ -3695,7 +3713,7 @@ struct rx_tpa_v2_start_cmpl_hi { RX_TPA_V2_START_CMPL_FLAGS2_META_FORMAT_HDR_OFFSET /* * This field indicates the IP type for the inner-most IP header. - * A value of '0' indicates IPv4. A value of '1' indicates IPv6. + * A value of '0' indicates IPv4. A value of '1' indicates IPv6. */ #define RX_TPA_V2_START_CMPL_FLAGS2_IP_TYPE \ UINT32_C(0x100) @@ -3742,8 +3760,8 @@ struct rx_tpa_v2_start_cmpl_hi { uint16_t errors_v2; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_TPA_V2_START_CMPL_V2 \ UINT32_C(0x1) @@ -3753,7 +3771,7 @@ struct rx_tpa_v2_start_cmpl_hi { /* * This error indicates that there was some sort of problem with * the BDs for the packet that was found after part of the - * packet was already placed. The packet should be treated as + * packet was already placed. The packet should be treated as * invalid. */ #define RX_TPA_V2_START_CMPL_ERRORS_BUFFER_ERROR_MASK \ @@ -3794,7 +3812,7 @@ struct rx_tpa_v2_start_cmpl_hi { uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset; /* * This is the offset from the beginning of the packet in bytes for - * the outer L3 header. If there is no outer L3 header, then this + * the outer L3 header. If there is no outer L3 header, then this * value is zero. */ #define RX_TPA_V2_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff) @@ -3830,8 +3848,8 @@ struct rx_tpa_v2_end_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define RX_TPA_V2_END_CMPL_TYPE_MASK UINT32_C(0x3f) @@ -3848,7 +3866,7 @@ struct rx_tpa_v2_end_cmpl { #define RX_TPA_V2_END_CMPL_FLAGS_SFT 6 /* * When this bit is '1', it indicates a packet that has an - * error of some type. Type of error is indicated in + * error of some type. Type of error is indicated in * error_flags. */ #define RX_TPA_V2_END_CMPL_FLAGS_ERROR UINT32_C(0x40) @@ -3857,9 +3875,9 @@ struct rx_tpa_v2_end_cmpl { #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7 /* * Jumbo: - * TPA Packet was placed using jumbo algorithm. This means + * TPA Packet was placed using jumbo algorithm. This means * that the first buffer will be filled with data before - * moving to aggregation buffers. Each aggregation buffer + * moving to aggregation buffers. Each aggregation buffer * will be filled before moving to the next aggregation * buffer. */ @@ -3902,7 +3920,7 @@ struct rx_tpa_v2_end_cmpl { * This value indicates what the inner packet determined for the * packet was. * - 2 TCP Packet - * Indicates that the packet was IP and TCP. This indicates + * Indicates that the packet was IP and TCP. This indicates * that the ip_cs field is valid and that the tcp_udp_cs * field is valid and contains the TCP checksum. * This also indicates that the payload_offset field is valid. @@ -3923,15 +3941,15 @@ struct rx_tpa_v2_end_cmpl { uint8_t v1; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_TPA_V2_END_CMPL_V1 UINT32_C(0x1) /* This value is the number of segments in the TPA operation. */ uint8_t tpa_segs; /* * This is the aggregation ID that the completion is associated - * with. Use this number to correlate the TPA start completion + * with. Use this number to correlate the TPA start completion * with the TPA end completion. */ uint16_t agg_id; @@ -3944,8 +3962,8 @@ struct rx_tpa_v2_end_cmpl { * For GRO packets, this field is zero except for the following * sub-fields. * - tsdelta[31] - * Timestamp present indication. When '0', no Timestamp - * option is in the packet. When '1', then a Timestamp + * Timestamp present indication. When '0', no Timestamp + * option is in the packet. When '1', then a Timestamp * option is present in the packet. */ uint32_t tsdelta; @@ -3986,13 +4004,13 @@ struct rx_tpa_v2_end_cmpl_hi { */ uint8_t tpa_agg_bufs; /* - * This value is the valid when TPA completion is active. It + * This value is the valid when TPA completion is active. It * indicates the length of the longest segment of the TPA operation * for LRO mode and the length of the first segment in GRO mode. * * This value may be used by GRO software to re-construct the original - * packet stream from the TPA packet. This is the length of all - * but the last segment for GRO. In LRO mode this value may be used + * packet stream from the TPA packet. This is the length of all + * but the last segment for GRO. In LRO mode this value may be used * to indicate MSS size to the stack. */ uint16_t tpa_seg_len; @@ -4000,8 +4018,8 @@ struct rx_tpa_v2_end_cmpl_hi { uint16_t errors_v2; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_TPA_V2_END_CMPL_V2 UINT32_C(0x1) #define RX_TPA_V2_END_CMPL_ERRORS_MASK \ @@ -4010,7 +4028,7 @@ struct rx_tpa_v2_end_cmpl_hi { /* * This error indicates that there was some sort of problem with * the BDs for the packet that was found after part of the - * packet was already placed. The packet should be treated as + * packet was already placed. The packet should be treated as * invalid. */ #define RX_TPA_V2_END_CMPL_ERRORS_BUFFER_ERROR_MASK \ @@ -4021,7 +4039,7 @@ struct rx_tpa_v2_end_cmpl_hi { (UINT32_C(0x0) << 1) /* * This error occurs when there is a fatal HW problem in - * the chip only. It indicates that there were not + * the chip only. It indicates that there were not * BDs on chip but that there was adequate reservation. * provided by the TPA block. */ @@ -4036,7 +4054,7 @@ struct rx_tpa_v2_end_cmpl_hi { /* * This error occurs when TPA block was not configured to * reserve adequate BDs for TPA operations on this RX - * ring. All data for the TPA operation was not placed. + * ring. All data for the TPA operation was not placed. * * This error can also be generated when the number of * segments is not programmed correctly in TPA and the @@ -4071,8 +4089,8 @@ struct rx_tpa_v2_abuf_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define RX_TPA_V2_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f) @@ -4080,17 +4098,17 @@ struct rx_tpa_v2_abuf_cmpl { /* * RX TPA Aggregation Buffer completion : * Completion of an L2 aggregation buffer in support of - * TPA packet completion. Length = 16B + * TPA packet completion. Length = 16B */ #define RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG UINT32_C(0x16) #define RX_TPA_V2_ABUF_CMPL_TYPE_LAST \ RX_TPA_V2_ABUF_CMPL_TYPE_RX_TPA_AGG /* * This is the length of the data for the packet stored in this - * aggregation buffer identified by the opaque value. This does not + * aggregation buffer identified by the opaque value. This does not * include the length of any * data placed in other aggregation BDs or in the packet or buffer - * BDs. This length does not include any space added due to + * BDs. This length does not include any space added due to * hdr_offset register during HDS placement mode. */ uint16_t len; @@ -4102,8 +4120,8 @@ struct rx_tpa_v2_abuf_cmpl { uint16_t v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_TPA_V2_ABUF_CMPL_V UINT32_C(0x1) /* @@ -4121,8 +4139,8 @@ struct rx_abuf_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define RX_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f) @@ -4130,16 +4148,16 @@ struct rx_abuf_cmpl { /* * RX Aggregation Buffer completion : * Completion of an L2 aggregation buffer in support of - * TPA, HDS, or Jumbo packet completion. Length = 16B + * TPA, HDS, or Jumbo packet completion. Length = 16B */ #define RX_ABUF_CMPL_TYPE_RX_AGG UINT32_C(0x12) #define RX_ABUF_CMPL_TYPE_LAST RX_ABUF_CMPL_TYPE_RX_AGG /* * This is the length of the data for the packet stored in this - * aggregation buffer identified by the opaque value. This does not + * aggregation buffer identified by the opaque value. This does not * include the length of any * data placed in other aggregation BDs or in the packet or buffer - * BDs. This length does not include any space added due to + * BDs. This length does not include any space added due to * hdr_offset register during HDS placement mode. */ uint16_t len; @@ -4151,8 +4169,8 @@ struct rx_abuf_cmpl { uint32_t v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define RX_ABUF_CMPL_V UINT32_C(0x1) /* unused3 is 32 b */ @@ -4165,8 +4183,8 @@ struct eject_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define EJECT_CMPL_TYPE_MASK UINT32_C(0x3f) @@ -4182,7 +4200,7 @@ struct eject_cmpl { #define EJECT_CMPL_FLAGS_SFT 6 /* * When this bit is '1', it indicates a packet that has an - * error of some type. Type of error is indicated in + * error of some type. Type of error is indicated in * error_flags. */ #define EJECT_CMPL_FLAGS_ERROR UINT32_C(0x40) @@ -4199,8 +4217,8 @@ struct eject_cmpl { uint16_t v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define EJECT_CMPL_V UINT32_C(0x1) #define EJECT_CMPL_ERRORS_MASK UINT32_C(0xfffe) @@ -4247,8 +4265,8 @@ struct hwrm_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_CMPL_TYPE_MASK UINT32_C(0x3f) @@ -4266,8 +4284,8 @@ struct hwrm_cmpl { uint32_t v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_CMPL_V UINT32_C(0x1) /* unused4 is 32 b */ @@ -4279,16 +4297,16 @@ struct hwrm_fwd_req_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ uint16_t req_len_type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_FWD_REQ_CMPL_TYPE_MASK UINT32_C(0x3f) @@ -4314,8 +4332,8 @@ struct hwrm_fwd_req_cmpl { uint32_t req_buf_addr_v[2]; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_FWD_REQ_CMPL_V UINT32_C(0x1) /* Address of forwarded request. */ @@ -4329,8 +4347,8 @@ struct hwrm_fwd_resp_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_FWD_RESP_CMPL_TYPE_MASK UINT32_C(0x3f) @@ -4355,8 +4373,8 @@ struct hwrm_fwd_resp_cmpl { uint32_t resp_buf_addr_v[2]; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_FWD_RESP_CMPL_V UINT32_C(0x1) /* Address of forwarded request. */ @@ -4370,8 +4388,8 @@ struct hwrm_async_event_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f) @@ -4496,6 +4514,12 @@ struct hwrm_async_event_cmpl { /* TFLIB unique link status changed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_TFLIB_LINK_STATUS_CHANGE \ UINT32_C(0x3e) + /* + * An event signifying completion for HWRM_FW_STATE_QUIESCE + * (completion, timeout, or error) + */ + #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_QUIESCE_DONE \ + UINT32_C(0x3f) /* * A trace log message. This contains firmware trace logs string * embedded in the asynchronous message. This is an experimental @@ -4513,8 +4537,8 @@ struct hwrm_async_event_cmpl { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_V UINT32_C(0x1) /* opaque is 7 b */ @@ -4534,8 +4558,8 @@ struct hwrm_async_event_cmpl_link_status_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_MASK \ @@ -4558,8 +4582,8 @@ struct hwrm_async_event_cmpl_link_status_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_V \ UINT32_C(0x1) @@ -4613,8 +4637,8 @@ struct hwrm_async_event_cmpl_link_mtu_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_MASK \ @@ -4637,8 +4661,8 @@ struct hwrm_async_event_cmpl_link_mtu_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_V UINT32_C(0x1) /* opaque is 7 b */ @@ -4663,8 +4687,8 @@ struct hwrm_async_event_cmpl_link_speed_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_MASK \ @@ -4687,8 +4711,8 @@ struct hwrm_async_event_cmpl_link_speed_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_V \ UINT32_C(0x1) @@ -4758,8 +4782,8 @@ struct hwrm_async_event_cmpl_dcb_config_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_MASK \ @@ -4791,8 +4815,8 @@ struct hwrm_async_event_cmpl_dcb_config_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_V \ UINT32_C(0x1) @@ -4839,8 +4863,8 @@ struct hwrm_async_event_cmpl_port_conn_not_allowed { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_MASK \ @@ -4864,8 +4888,8 @@ struct hwrm_async_event_cmpl_port_conn_not_allowed { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_V \ UINT32_C(0x1) @@ -4915,8 +4939,8 @@ struct hwrm_async_event_cmpl_link_speed_cfg_not_allowed { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_MASK \ @@ -4940,8 +4964,8 @@ struct hwrm_async_event_cmpl_link_speed_cfg_not_allowed { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_V \ UINT32_C(0x1) @@ -4968,8 +4992,8 @@ struct hwrm_async_event_cmpl_link_speed_cfg_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_MASK \ @@ -4993,8 +5017,8 @@ struct hwrm_async_event_cmpl_link_speed_cfg_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_V \ UINT32_C(0x1) @@ -5037,8 +5061,8 @@ struct hwrm_async_event_cmpl_port_phy_cfg_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_MASK \ @@ -5062,8 +5086,8 @@ struct hwrm_async_event_cmpl_port_phy_cfg_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_V \ UINT32_C(0x1) @@ -5113,8 +5137,8 @@ struct hwrm_async_event_cmpl_reset_notify { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_TYPE_MASK \ @@ -5137,8 +5161,8 @@ struct hwrm_async_event_cmpl_reset_notify { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_V UINT32_C(0x1) /* opaque is 7 b */ @@ -5213,8 +5237,8 @@ struct hwrm_async_event_cmpl_error_recovery { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_TYPE_MASK \ @@ -5242,8 +5266,8 @@ struct hwrm_async_event_cmpl_error_recovery { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_ERROR_RECOVERY_V UINT32_C(0x1) /* opaque is 7 b */ @@ -5282,8 +5306,8 @@ struct hwrm_async_event_cmpl_func_drvr_unload { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_MASK \ @@ -5306,8 +5330,8 @@ struct hwrm_async_event_cmpl_func_drvr_unload { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_V UINT32_C(0x1) /* opaque is 7 b */ @@ -5333,8 +5357,8 @@ struct hwrm_async_event_cmpl_func_drvr_load { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_MASK \ @@ -5357,8 +5381,8 @@ struct hwrm_async_event_cmpl_func_drvr_load { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_V UINT32_C(0x1) /* opaque is 7 b */ @@ -5382,8 +5406,8 @@ struct hwrm_async_event_cmpl_func_flr_proc_cmplt { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_MASK \ @@ -5407,8 +5431,8 @@ struct hwrm_async_event_cmpl_func_flr_proc_cmplt { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_V \ UINT32_C(0x1) @@ -5435,8 +5459,8 @@ struct hwrm_async_event_cmpl_pf_drvr_unload { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_MASK \ @@ -5459,8 +5483,8 @@ struct hwrm_async_event_cmpl_pf_drvr_unload { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_V UINT32_C(0x1) /* opaque is 7 b */ @@ -5488,8 +5512,8 @@ struct hwrm_async_event_cmpl_pf_drvr_load { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_MASK \ @@ -5512,8 +5536,8 @@ struct hwrm_async_event_cmpl_pf_drvr_load { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_V UINT32_C(0x1) /* opaque is 7 b */ @@ -5541,8 +5565,8 @@ struct hwrm_async_event_cmpl_vf_flr { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_MASK \ @@ -5564,8 +5588,8 @@ struct hwrm_async_event_cmpl_vf_flr { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_V UINT32_C(0x1) /* opaque is 7 b */ @@ -5593,8 +5617,8 @@ struct hwrm_async_event_cmpl_vf_mac_addr_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_MASK \ @@ -5617,8 +5641,8 @@ struct hwrm_async_event_cmpl_vf_mac_addr_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_V \ UINT32_C(0x1) @@ -5645,8 +5669,8 @@ struct hwrm_async_event_cmpl_pf_vf_comm_status_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_MASK \ @@ -5670,8 +5694,8 @@ struct hwrm_async_event_cmpl_pf_vf_comm_status_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_V \ UINT32_C(0x1) @@ -5701,8 +5725,8 @@ struct hwrm_async_event_cmpl_vf_cfg_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK \ @@ -5725,8 +5749,8 @@ struct hwrm_async_event_cmpl_vf_cfg_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V UINT32_C(0x1) /* opaque is 7 b */ @@ -5786,8 +5810,8 @@ struct hwrm_async_event_cmpl_llfc_pfc_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_MASK \ @@ -5814,8 +5838,8 @@ struct hwrm_async_event_cmpl_llfc_pfc_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_V UINT32_C(0x1) /* opaque is 7 b */ @@ -5865,8 +5889,8 @@ struct hwrm_async_event_cmpl_default_vnic_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_MASK \ @@ -5885,7 +5909,7 @@ struct hwrm_async_event_cmpl_default_vnic_change { 6 /* Identifiers of events. */ uint16_t event_id; - /* Notification of a default vnic allocaiton or free */ + /* Notification of a default vnic allocation or free */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION \ UINT32_C(0x35) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_LAST \ @@ -5895,8 +5919,8 @@ struct hwrm_async_event_cmpl_default_vnic_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_V \ UINT32_C(0x1) @@ -5947,8 +5971,8 @@ struct hwrm_async_event_cmpl_hw_flow_aged { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_TYPE_MASK \ @@ -5971,8 +5995,8 @@ struct hwrm_async_event_cmpl_hw_flow_aged { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_HW_FLOW_AGED_V UINT32_C(0x1) /* opaque is 7 b */ @@ -6014,8 +6038,8 @@ struct hwrm_async_event_cmpl_eem_cache_flush_req { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_TYPE_MASK \ @@ -6039,8 +6063,8 @@ struct hwrm_async_event_cmpl_eem_cache_flush_req { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_REQ_V \ UINT32_C(0x1) @@ -6062,8 +6086,8 @@ struct hwrm_async_event_cmpl_eem_cache_flush_done { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_TYPE_MASK \ @@ -6090,8 +6114,8 @@ struct hwrm_async_event_cmpl_eem_cache_flush_done { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_EEM_CACHE_FLUSH_DONE_V \ UINT32_C(0x1) @@ -6118,8 +6142,8 @@ struct hwrm_async_event_cmpl_tcp_flag_action_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_TYPE_MASK \ @@ -6143,8 +6167,8 @@ struct hwrm_async_event_cmpl_tcp_flag_action_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_V \ UINT32_C(0x1) @@ -6166,8 +6190,8 @@ struct hwrm_async_event_cmpl_eem_flow_active { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_TYPE_MASK \ @@ -6209,8 +6233,8 @@ struct hwrm_async_event_cmpl_eem_flow_active { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_EEM_FLOW_ACTIVE_V UINT32_C(0x1) /* opaque is 7 b */ @@ -6266,8 +6290,8 @@ struct hwrm_async_event_cmpl_eem_cfg_change { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_TYPE_MASK \ @@ -6290,8 +6314,8 @@ struct hwrm_async_event_cmpl_eem_cfg_change { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_EEM_CFG_CHANGE_V UINT32_C(0x1) /* opaque is 7 b */ @@ -6317,14 +6341,87 @@ struct hwrm_async_event_cmpl_eem_cfg_change { UINT32_C(0x2) } __attribute__((packed)); +/* hwrm_async_event_cmpl_quiesce_done (size:128b/16B) */ +struct hwrm_async_event_cmpl_quiesce_done { + uint16_t type; + /* + * This field indicates the exact type of the completion. + * By convention, the LSB identifies the length of the + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B + * records. + */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_MASK \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_SFT 0 + /* HWRM Asynchronous Event Information */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_HWRM_ASYNC_EVENT \ + UINT32_C(0x2e) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_LAST \ + HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_TYPE_HWRM_ASYNC_EVENT + /* Identifiers of events. */ + uint16_t event_id; + /* An event signifying completion of HWRM_FW_STATE_QUIESCE */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_QUIESCE_DONE \ + UINT32_C(0x3f) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_LAST \ + HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_ID_QUIESCE_DONE + /* Event specific data */ + uint32_t event_data2; + /* Status of HWRM_FW_STATE_QUIESCE completion */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_MASK \ + UINT32_C(0xff) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_SFT \ + 0 + /* + * The quiesce operation started by HWRM_FW_STATE_QUIESCE + * completed successfully. + */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_SUCCESS \ + UINT32_C(0x0) + /* + * The quiesce operation started by HWRM_FW_STATE_QUIESCE timed + * out. + */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_TIMEOUT \ + UINT32_C(0x1) + /* + * The quiesce operation started by HWRM_FW_STATE_QUIESCE + * encountered an error. + */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_ERROR \ + UINT32_C(0x2) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_LAST \ + HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA2_QUIESCE_STATUS_ERROR + uint8_t opaque_v; + /* + * This value is written by the NIC such that it will be different + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. + */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_V UINT32_C(0x1) + /* opaque is 7 b */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_OPAQUE_MASK UINT32_C(0xfe) + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_OPAQUE_SFT 1 + /* 8-lsb timestamp from POR (100-msec resolution) */ + uint8_t timestamp_lo; + /* 16-lsb timestamp from POR (100-msec resolution) */ + uint16_t timestamp_hi; + /* Event specific data */ + uint32_t event_data1; + /* Time stamp for error event */ + #define HWRM_ASYNC_EVENT_CMPL_QUIESCE_DONE_EVENT_DATA1_TIMESTAMP \ + UINT32_C(0x1) +} __attribute__((packed)); + /* hwrm_async_event_cmpl_fw_trace_msg (size:128b/16B) */ struct hwrm_async_event_cmpl_fw_trace_msg { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_TYPE_MASK \ @@ -6363,8 +6460,8 @@ struct hwrm_async_event_cmpl_fw_trace_msg { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_FW_TRACE_MSG_V UINT32_C(0x1) /* opaque is 7 b */ @@ -6430,8 +6527,8 @@ struct hwrm_async_event_cmpl_hwrm_error { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the - * record in 16B units. Even values indicate 16B - * records. Odd values indicate 32B + * record in 16B units. Even values indicate 16B + * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \ @@ -6469,8 +6566,8 @@ struct hwrm_async_event_cmpl_hwrm_error { uint8_t opaque_v; /* * This value is written by the NIC such that it will be different - * for each pass through the completion queue. The even passes - * will write 1. The odd passes will write 0. + * for each pass through the completion queue. The even passes + * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1) /* opaque is 7 b */ @@ -7335,6 +7432,15 @@ struct hwrm_func_qcaps_output { */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ERR_RECOVER_RELOAD \ UINT32_C(0x2000000) + /* + * If the query is for a VF, then this flag (always set to 0) shall + * be ignored. If this query is for a PF and this flag is set to 1, + * host, when registered for the default vnic change async event, + * receives async notification whenever a default vnic state is + * changed for any of child or adopted VFs. + */ + #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_NOTIFY_VF_DEF_VNIC_CHNG_SUPPORTED \ + UINT32_C(0x4000000) /* * This value is current MAC address configured for this * function. A value of 00-00-00-00-00-00 indicates no @@ -7905,7 +8011,12 @@ struct hwrm_func_qcfg_output { * after receiving the RESET Notify event. */ uint32_t reset_addr_poll; - uint8_t unused_2[3]; + /* + * This field specifies legacy L2 doorbell size in KBytes. Drivers should use + * this value to find out the doorbell page offset from the BAR. + */ + uint16_t legacy_l2_db_size_kb; + uint8_t unused_2[1]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -8606,9 +8717,22 @@ struct hwrm_func_qstats_input { * Function ID of the function that is being queried. * 0xFF... (All Fs) if the query is for the requesting * function. + * A privileged PF can query for other function's statistics. */ uint16_t fid; - uint8_t unused_0[6]; + /* This flags indicates the type of statistics request. */ + uint8_t flags; + /* This value is not used to avoid backward compatibility issues. */ + #define HWRM_FUNC_QSTATS_INPUT_FLAGS_UNUSED UINT32_C(0x0) + /* + * flags should be set to 1 when request is for only RoCE statistics. + * This will be honored only if the caller_fid is a privileged PF. + * In all other cases FID and caller_fid should be the same. + */ + #define HWRM_FUNC_QSTATS_INPUT_FLAGS_ROCE_ONLY UINT32_C(0x1) + #define HWRM_FUNC_QSTATS_INPUT_FLAGS_LAST \ + HWRM_FUNC_QSTATS_INPUT_FLAGS_ROCE_ONLY + uint8_t unused_0[5]; } __attribute__((packed)); /* hwrm_func_qstats_output (size:1408b/176B) */ @@ -8928,12 +9052,11 @@ struct hwrm_func_drv_rgtr_input { UINT32_C(0x20) /* * When this bit is 1, the function is indicating the support of the - * Master capability. The Firmware will use this capability to select - * the Master function. The master function will be used to initiate - * designated functionality like error recovery etc. If none of the - * registered PFs or trusted VFs indicate this support, then - * firmware will select the 1st registered PF as Master capable - * instance. + * Master capability. The Firmware will use this capability to select the + * Master function. The master function will be used to initiate + * designated functionality like error recovery etc… If none of the + * registered PF’s or trusted VF’s indicate this support, then + * firmware will select the 1st registered PF as Master capable instance. */ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_MASTER_SUPPORT \ UINT32_C(0x40) @@ -9621,7 +9744,7 @@ struct hwrm_func_backing_store_qcaps_input { uint64_t resp_addr; } __attribute__((packed)); -/* hwrm_func_backing_store_qcaps_output (size:576b/72B) */ +/* hwrm_func_backing_store_qcaps_output (size:640b/80B) */ struct hwrm_func_backing_store_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; @@ -9728,6 +9851,19 @@ struct hwrm_func_backing_store_qcaps_output { * limitations. */ uint8_t tqm_entries_multiple; + /* + * Initializer to be used by drivers + * to initialize context memory to ensure + * context subsystem flags an error for an attack + * before the first time context load. + */ + uint8_t ctx_kind_initializer; + /* Reserved for future. */ + uint32_t rsvd; + /* Reserved for future. */ + uint16_t rsvd1; + /* Reserved for future. */ + uint8_t rsvd2; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -13369,7 +13505,7 @@ struct hwrm_port_phy_cfg_input { #define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2) /* * The HW will be configured with external loopback such that - * host data is sent on the trasmitter and based on the external + * host data is sent on the transmitter and based on the external * loopback connection the data will be received without modification. */ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_EXTERNAL UINT32_C(0x3) @@ -13431,7 +13567,7 @@ struct hwrm_port_phy_cfg_input { UINT32_C(0x40) uint8_t unused_2[2]; /* - * Reuested setting of TX LPI timer in microseconds. + * Requested setting of TX LPI timer in microseconds. * This field is valid only when EEE is enabled and TX LPI is * enabled. */ @@ -13861,7 +13997,7 @@ struct hwrm_port_phy_qcfg_output { #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2) /* * The HW will be configured with external loopback such that - * host data is sent on the trasmitter and based on the external + * host data is sent on the transmitter and based on the external * loopback connection the data will be received without modification. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_EXTERNAL UINT32_C(0x3) @@ -14500,7 +14636,7 @@ struct hwrm_port_mac_cfg_input { #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_ENABLE \ UINT32_C(0x100) /* - * When this bit is '1', the the Out-Of-Box WoL is requested to + * When this bit is '1', the Out-Of-Box WoL is requested to * be disabled on this port. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_DISABLE \ @@ -14670,7 +14806,7 @@ struct hwrm_port_mac_cfg_input { * This field shall be ignored if the ptp_tx_ts_capture_enable * flag is not set in this command. * Otherwise, if bit 'i' is set, then the HWRM is being - * requested to configure the transmit sied of the port to + * requested to configure the transmit side of the port to * capture the time stamp of every transmitted PTP message * with messageType field value set to i. */ @@ -16168,13 +16304,28 @@ struct hwrm_port_phy_qcaps_output { */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EXTERNAL_LPBK_SUPPORTED \ UINT32_C(0x2) + /* + * If set to 1, then this field indicates that the + * PHY is capable of supporting loopback in autoneg mode. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_AUTONEG_LPBK_SUPPORTED \ + UINT32_C(0x4) + /* + * Indicates if the configuration of shared PHY settings is supported. + * In cases where a physical port is shared by multiple functions + * (e.g. NPAR, multihost, etc), the configuration of PHY + * settings may not be allowed. Callers to HWRM_PORT_PHY_CFG will + * get an HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED error in this case. + */ + #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_SHARED_PHY_CFG_SUPPORTED \ + UINT32_C(0x8) /* * Reserved field. The HWRM shall set this field to 0. * An HWRM client shall ignore this field. */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_MASK \ - UINT32_C(0xfc) - #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT 2 + UINT32_C(0xf0) + #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT 4 /* Number of front panel ports for this device. */ uint8_t port_cnt; /* Not supported or unknown */ @@ -17726,6 +17877,553 @@ struct hwrm_port_prbs_test_output { uint8_t valid; } __attribute__((packed)); +/********************** + * hwrm_port_dsc_dump * + **********************/ + + +/* hwrm_port_dsc_dump_input (size:320b/40B) */ +struct hwrm_port_dsc_dump_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Host address where response diagnostic data is returned. */ + uint64_t resp_data_addr; + /* + * Size of the buffer pointed to by resp_data_addr. The firmware + * may use this entire buffer or less than the entire buffer, but + * never more. + */ + uint16_t data_len; + uint16_t unused_0; + uint32_t unused_1; + /* Port ID of port where dsc dump to be collected. */ + uint16_t port_id; + /* Diag level specified by the user */ + uint16_t diag_level; + /* SRDS_DIAG_LANE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_LANE \ + UINT32_C(0x0) + /* SRDS_DIAG_CORE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_CORE \ + UINT32_C(0x1) + /* SRDS_DIAG_EVENT */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EVENT \ + UINT32_C(0x2) + /* SRDS_DIAG_EYE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EYE \ + UINT32_C(0x3) + /* SRDS_DIAG_REG_CORE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_REG_CORE \ + UINT32_C(0x4) + /* SRDS_DIAG_REG_LANE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_REG_LANE \ + UINT32_C(0x5) + /* SRDS_DIAG_UC_CORE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_UC_CORE \ + UINT32_C(0x6) + /* SRDS_DIAG_UC_LANE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_UC_LANE \ + UINT32_C(0x7) + /* SRDS_DIAG_LANE_DEBUG */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_LANE_DEBUG \ + UINT32_C(0x8) + /* SRDS_DIAG_BER_VERT */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_BER_VERT \ + UINT32_C(0x9) + /* SRDS_DIAG_BER_HORZ */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_BER_HORZ \ + UINT32_C(0xa) + /* SRDS_DIAG_EVENT_SAFE */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_EVENT_SAFE \ + UINT32_C(0xb) + /* SRDS_DIAG_TIMESTAMP */ + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_TIMESTAMP \ + UINT32_C(0xc) + #define HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_LAST \ + HWRM_PORT_DSC_DUMP_INPUT_DIAG_LEVEL_SRDS_DIAG_TIMESTAMP + /* + * This field is a lane number + * on which to collect the dsc dump + */ + uint16_t lane_number; + /* + * Configuration bits. + * Use enable bit to start dsc dump or retrieve dump + */ + uint16_t dsc_dump_config; + /* + * Set 0 to retrieve the dsc dump + * Set 1 to start the dsc dump + */ + #define HWRM_PORT_DSC_DUMP_INPUT_DSC_DUMP_CONFIG_START_RETRIEVE \ + UINT32_C(0x1) +} __attribute__((packed)); + +/* hwrm_port_dsc_dump_output (size:128b/16B) */ +struct hwrm_port_dsc_dump_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* Total length of stored data. */ + uint16_t total_data_len; + uint16_t unused_0; + uint8_t unused_1[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/****************************** + * hwrm_port_sfp_sideband_cfg * + ******************************/ + + +/* hwrm_port_sfp_sideband_cfg_input (size:256b/32B) */ +struct hwrm_port_sfp_sideband_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of port that is to be queried. */ + uint16_t port_id; + uint8_t unused_0[6]; + /* + * This bitfield is used to specify which bits from the 'flags' + * fields are being configured by the caller. + */ + uint32_t enables; + /* This bit must be '1' for rs0 to be configured. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RS0 \ + UINT32_C(0x1) + /* This bit must be '1' for rs1 to be configured. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RS1 \ + UINT32_C(0x2) + /* This bit must be '1' for tx_disable to be configured. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_TX_DIS \ + UINT32_C(0x4) + /* + * This bit must be '1' for mod_sel to be configured. + * Valid only on QSFP modules + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_MOD_SEL \ + UINT32_C(0x8) + /* This bit must be '1' for reset_l to be configured. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_RESET_L \ + UINT32_C(0x10) + /* This bit must be '1' for lp_mode to be configured. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_LP_MODE \ + UINT32_C(0x20) + /* This bit must be '1' for pwr_disable to be configured. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_ENABLES_PWR_DIS \ + UINT32_C(0x40) + /* + * Only bits that have corresponding bits in the 'enables' + * bitfield are processed by the firmware, all other bits + * of 'flags' are ignored. + */ + uint32_t flags; + /* + * This bit along with rs1 configures the current speed of the dual + * rate module. If these pins are GNDed then the speed can be changed + * by driectly writing to EEPROM. + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RS0 \ + UINT32_C(0x1) + /* + * This bit along with rs0 configures the current speed of the dual + * rate module. If these pins are GNDed then the speed can be changed + * by driectly writing to EEPROM. + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RS1 \ + UINT32_C(0x2) + /* + * When this bit is set to '1', tx_disable is set. + * On a 1G BASE-T module, if this bit is set, + * module PHY registers will not be accessible. + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_TX_DIS \ + UINT32_C(0x4) + /* + * When this bit is set to '1', this module is selected. + * Valid only on QSFP modules + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_MOD_SEL \ + UINT32_C(0x8) + /* + * If reset_l is set to 0, Module will be taken out of reset + * and other signals will be set to their requested state once + * the module is out of reset. + * Valid only on QSFP modules + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_RESET_L \ + UINT32_C(0x10) + /* + * When this bit is set to '1', the module will be configured + * in low power mode. + * Valid only on QSFP modules + */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_LP_MODE \ + UINT32_C(0x20) + /* When this bit is set to '1', the module will be powered down. */ + #define HWRM_PORT_SFP_SIDEBAND_CFG_INPUT_FLAGS_PWR_DIS \ + UINT32_C(0x40) +} __attribute__((packed)); + +/* hwrm_port_sfp_sideband_cfg_output (size:128b/16B) */ +struct hwrm_port_sfp_sideband_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. When + * writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/******************************* + * hwrm_port_sfp_sideband_qcfg * + *******************************/ + + +/* hwrm_port_sfp_sideband_qcfg_input (size:192b/24B) */ +struct hwrm_port_sfp_sideband_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of port that is to be queried. */ + uint16_t port_id; + uint8_t unused_0[6]; +} __attribute__((packed)); + +/* hwrm_port_sfp_sideband_qcfg_output (size:192b/24B) */ +struct hwrm_port_sfp_sideband_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * Bitmask indicating which sideband signals are valid. + * This is based on the board and nvm cfg that is present on the board. + */ + uint32_t supported_mask; + uint32_t sideband_signals; + /* When this bit is set to '1', the Module is absent. */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_MOD_ABS \ + UINT32_C(0x1) + /* + * When this bit is set to '1', there is no valid signal on RX. + * This signal is a filtered version of Signal Detect. + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RX_LOS \ + UINT32_C(0x2) + /* + * This bit along with rs1 indiactes the current speed of the dual + * rate module.If these pins are grounded then the speed can be + * changed by driectky writing to EEPROM. + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RS0 \ + UINT32_C(0x4) + /* + * This bit along with rs0 indiactes the current speed of the dual + * rate module.If these pins are grounded then the speed can be + * changed by driectky writing to EEPROM. + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RS1 \ + UINT32_C(0x8) + /* + * When this bit is set to '1', tx_disable is set. + * On a 1G BASE-T module, if this bit is set, module PHY + * registers will not be accessible. + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_TX_DIS \ + UINT32_C(0x10) + /* When this bit is set to '1', tx_fault is set. */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_TX_FAULT \ + UINT32_C(0x20) + /* + * When this bit is set to '1', module is selected. + * Valid only on QSFP modules + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_MOD_SEL \ + UINT32_C(0x40) + /* + * When this bit is set to '0', the module is held in reset. + * if reset_l is set to 1,first module is taken out of reset + * and other signals will be set to their requested state. + * Valid only on QSFP modules. + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_RESET_L \ + UINT32_C(0x80) + /* + * When this bit is set to '1', the module is in low power mode. + * Valid only on QSFP modules + */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_LP_MODE \ + UINT32_C(0x100) + /* When this bit is set to '1', module is in power down state. */ + #define HWRM_PORT_SFP_SIDEBAND_QCFG_OUTPUT_SIDEBAND_SIGNALS_PWR_DIS \ + UINT32_C(0x200) + uint8_t unused[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. When + * writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/********************************** + * hwrm_port_phy_mdio_bus_acquire * + **********************************/ + + +/* hwrm_port_phy_mdio_bus_acquire_input (size:192b/24B) */ +struct hwrm_port_phy_mdio_bus_acquire_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of the port. */ + uint16_t port_id; + /* + * client_id of the client requesting BUS access. + * Any value from 0x10 to 0xFFFF can be used. + * Client should make sure that the returned client_id + * in response matches the client_id in request. + * 0-0xF are reserved for internal use. + */ + uint16_t client_id; + /* + * Timeout in milli seconds, MDIO BUS will be released automatically + * after this time, if another mdio acquire command is not received + * within the timeout window from the same client. + * A 0xFFFF will hold the bus until this bus is released. + */ + uint16_t mdio_bus_timeout; + uint8_t unused_0[2]; +} __attribute__((packed)); + +/* hwrm_port_phy_mdio_bus_acquire_output (size:128b/16B) */ +struct hwrm_port_phy_mdio_bus_acquire_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint16_t unused_0; + /* + * client_id of the module holding the BUS. + * 0-0xF are reserved for internal use. + */ + uint16_t client_id; + uint8_t unused_1[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/********************************** + * hwrm_port_phy_mdio_bus_release * + **********************************/ + + +/* hwrm_port_phy_mdio_bus_release_input (size:192b/24B) */ +struct hwrm_port_phy_mdio_bus_release_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* Port ID of the port. */ + uint16_t port_id; + /* + * client_id of the client requesting BUS release. + * A client should not release any other clients BUS. + */ + uint16_t client_id; + uint8_t unused_0[4]; +} __attribute__((packed)); + +/* hwrm_port_phy_mdio_bus_release_output (size:128b/16B) */ +struct hwrm_port_phy_mdio_bus_release_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint16_t unused_0; + /* The BUS is released if client_id matches the client_id in request. */ + uint16_t clients_id; + uint8_t unused_1[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + /*********************** * hwrm_queue_qportcfg * ***********************/ @@ -17776,7 +18474,7 @@ struct hwrm_queue_qportcfg_input { HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX /* * Port ID of port for which the queue configuration is being - * queried. This field is only required when sent by IPC. + * queried. This field is only required when sent by IPC. */ uint16_t port_id; /* @@ -18171,7 +18869,7 @@ struct hwrm_queue_qportcfg_output { HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -18242,7 +18940,7 @@ struct hwrm_queue_qcfg_output { /* The length of the response data in number of bytes. */ uint16_t resp_len; /* - * This value is a the estimate packet length used in the + * This value is the estimate packet length used in the * TX arbiter. */ uint32_t queue_len; @@ -18269,7 +18967,7 @@ struct hwrm_queue_qcfg_output { uint8_t unused_0; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -18373,7 +19071,7 @@ struct hwrm_queue_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -18463,7 +19161,7 @@ struct hwrm_queue_pfcenable_qcfg_output { uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -18513,22 +19211,22 @@ struct hwrm_queue_pfcenable_cfg_input { /* If set to 1, then PFC is requested to be enabled on PRI 1. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI1_PFC_ENABLED \ UINT32_C(0x2) - /* If set to 1, then PFC is requested to be enabled on PRI 2. */ + /* If set to 1, then PFC is requested to be enabled on PRI 2. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI2_PFC_ENABLED \ UINT32_C(0x4) - /* If set to 1, then PFC is requested to be enabled on PRI 3. */ + /* If set to 1, then PFC is requested to be enabled on PRI 3. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI3_PFC_ENABLED \ UINT32_C(0x8) - /* If set to 1, then PFC is requested to be enabled on PRI 4. */ + /* If set to 1, then PFC is requested to be enabled on PRI 4. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI4_PFC_ENABLED \ UINT32_C(0x10) - /* If set to 1, then PFC is requested to be enabled on PRI 5. */ + /* If set to 1, then PFC is requested to be enabled on PRI 5. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI5_PFC_ENABLED \ UINT32_C(0x20) - /* If set to 1, then PFC is requested to be enabled on PRI 6. */ + /* If set to 1, then PFC is requested to be enabled on PRI 6. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI6_PFC_ENABLED \ UINT32_C(0x40) - /* If set to 1, then PFC is requested to be enabled on PRI 7. */ + /* If set to 1, then PFC is requested to be enabled on PRI 7. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI7_PFC_ENABLED \ UINT32_C(0x80) /* @@ -18553,7 +19251,7 @@ struct hwrm_queue_pfcenable_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -18611,9 +19309,9 @@ struct hwrm_queue_pri2cos_qcfg_input { HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX /* * When this bit is set to '0', the query is - * for VLAN PRI field in tunnel headers. + * for PRI from tunnel headers. * When this bit is set to '1', the query is - * for VLAN PRI field in inner packet headers. + * for PRI from inner packet headers. */ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_IVLAN UINT32_C(0x2) /* @@ -18636,56 +19334,56 @@ struct hwrm_queue_pri2cos_qcfg_output { /* The length of the response data in number of bytes. */ uint16_t resp_len; /* - * CoS Queue assigned to priority 0. This value can only + * CoS Queue assigned to priority 0. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri0_cos_queue_id; /* - * CoS Queue assigned to priority 1. This value can only + * CoS Queue assigned to priority 1. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri1_cos_queue_id; /* - * CoS Queue assigned to priority 2 This value can only + * CoS Queue assigned to priority 2. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri2_cos_queue_id; /* - * CoS Queue assigned to priority 3. This value can only + * CoS Queue assigned to priority 3. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri3_cos_queue_id; /* - * CoS Queue assigned to priority 4. This value can only + * CoS Queue assigned to priority 4. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri4_cos_queue_id; /* - * CoS Queue assigned to priority 5. This value can only + * CoS Queue assigned to priority 5. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri5_cos_queue_id; /* - * CoS Queue assigned to priority 6. This value can only + * CoS Queue assigned to priority 6. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri6_cos_queue_id; /* - * CoS Queue assigned to priority 7. This value can only + * CoS Queue assigned to priority 7. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. @@ -18704,7 +19402,7 @@ struct hwrm_queue_pri2cos_qcfg_output { uint8_t unused_0[6]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -18765,9 +19463,9 @@ struct hwrm_queue_pri2cos_cfg_input { HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR /* * When this bit is set to '0', the mapping is requested - * for VLAN PRI field in tunnel headers. + * for PRI from tunnel headers. * When this bit is set to '1', the mapping is requested - * for VLAN PRI field in inner packet headers. + * for PRI from inner packet headers. */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_IVLAN UINT32_C(0x4) uint32_t enables; @@ -18826,12 +19524,12 @@ struct hwrm_queue_pri2cos_cfg_input { */ uint8_t port_id; /* - * CoS Queue assigned to priority 0. This value can only + * CoS Queue assigned to priority 0. This value can only * be changed before traffic has started. */ uint8_t pri0_cos_queue_id; /* - * CoS Queue assigned to priority 1. This value can only + * CoS Queue assigned to priority 1. This value can only * be changed before traffic has started. */ uint8_t pri1_cos_queue_id; @@ -18841,27 +19539,27 @@ struct hwrm_queue_pri2cos_cfg_input { */ uint8_t pri2_cos_queue_id; /* - * CoS Queue assigned to priority 3. This value can only + * CoS Queue assigned to priority 3. This value can only * be changed before traffic has started. */ uint8_t pri3_cos_queue_id; /* - * CoS Queue assigned to priority 4. This value can only + * CoS Queue assigned to priority 4. This value can only * be changed before traffic has started. */ uint8_t pri4_cos_queue_id; /* - * CoS Queue assigned to priority 5. This value can only + * CoS Queue assigned to priority 5. This value can only * be changed before traffic has started. */ uint8_t pri5_cos_queue_id; /* - * CoS Queue assigned to priority 6. This value can only + * CoS Queue assigned to priority 6. This value can only * be changed before traffic has started. */ uint8_t pri6_cos_queue_id; /* - * CoS Queue assigned to priority 7. This value can only + * CoS Queue assigned to priority 7. This value can only * be changed before traffic has started. */ uint8_t pri7_cos_queue_id; @@ -18881,7 +19579,7 @@ struct hwrm_queue_pri2cos_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -19924,7 +20622,7 @@ struct hwrm_queue_cos2bw_qcfg_output { uint8_t unused_2[4]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -21016,7 +21714,609 @@ struct hwrm_queue_cos2bw_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/************************* + * hwrm_queue_dscp_qcaps * + *************************/ + + +/* hwrm_queue_dscp_qcaps_input (size:192b/24B) */ +struct hwrm_queue_dscp_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure pri2cos mapping on this port. + */ + uint8_t port_id; + uint8_t unused_0[7]; +} __attribute__((packed)); + +/* hwrm_queue_dscp_qcaps_output (size:128b/16B) */ +struct hwrm_queue_dscp_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* The number of bits provided by the hardware for the DSCP value. */ + uint8_t num_dscp_bits; + uint8_t unused_0; + /* Max number of DSCP-MASK-PRI entries supported. */ + uint16_t max_entries; + uint8_t unused_1[3]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/**************************** + * hwrm_queue_dscp2pri_qcfg * + ****************************/ + + +/* hwrm_queue_dscp2pri_qcfg_input (size:256b/32B) */ +struct hwrm_queue_dscp2pri_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * This is the host address where the 24-bits DSCP-MASK-PRI + * tuple(s) will be copied to. + */ + uint64_t dest_data_addr; + /* + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure pri2cos mapping on this port. + */ + uint8_t port_id; + uint8_t unused_0; + /* Size of the buffer pointed to by dest_data_addr. */ + uint16_t dest_data_buffer_size; + uint8_t unused_1[4]; +} __attribute__((packed)); + +/* hwrm_queue_dscp2pri_qcfg_output (size:128b/16B) */ +struct hwrm_queue_dscp2pri_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * A count of the number of DSCP-MASK-PRI tuple(s) pointed to + * by the dest_data_addr. + */ + uint16_t entry_cnt; + /* + * This is the default PRI which un-initialized DSCP values are + * mapped to. + */ + uint8_t default_pri; + uint8_t unused_0[4]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/*************************** + * hwrm_queue_dscp2pri_cfg * + ***************************/ + + +/* hwrm_queue_dscp2pri_cfg_input (size:320b/40B) */ +struct hwrm_queue_dscp2pri_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * This is the host address where the 24-bits DSCP-MASK-PRI tuple + * will be copied from. + */ + uint64_t src_data_addr; + uint32_t flags; + /* use_hw_default_pri is 1 b */ + #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_FLAGS_USE_HW_DEFAULT_PRI \ + UINT32_C(0x1) + uint32_t enables; + /* + * This bit must be '1' for the default_pri field to be + * configured. + */ + #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_ENABLES_DEFAULT_PRI \ + UINT32_C(0x1) + /* + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure pri2cos mapping on this port. + */ + uint8_t port_id; + /* + * This is the default PRI which un-initialized DSCP values will be + * mapped to. + */ + uint8_t default_pri; + /* + * A count of the number of DSCP-MASK-PRI tuple(s) in the data pointed + * to by src_data_addr. + */ + uint16_t entry_cnt; + uint8_t unused_0[4]; +} __attribute__((packed)); + +/* hwrm_queue_dscp2pri_cfg_output (size:128b/16B) */ +struct hwrm_queue_dscp2pri_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/************************* + * hwrm_queue_mpls_qcaps * + *************************/ + + +/* hwrm_queue_mpls_qcaps_input (size:192b/24B) */ +struct hwrm_queue_mpls_qcaps_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure MPLS TC(EXP) to pri mapping on this port. + */ + uint8_t port_id; + uint8_t unused_0[7]; +} __attribute__((packed)); + +/* hwrm_queue_mpls_qcaps_output (size:128b/16B) */ +struct hwrm_queue_mpls_qcaps_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * Bitmask indicating which queues can be configured by the + * hwrm_queue_mplstc2pri_cfg command. + * + * Each bit represents a specific pri where bit 0 represents + * pri 0 and bit 7 represents pri 7. + * # A value of 0 indicates that the pri is not configurable + * by the hwrm_queue_mplstc2pri_cfg command. + * # A value of 1 indicates that the pri is configurable. + * # A hwrm_queue_mplstc2pri_cfg command shall return error when + * trying to configure a pri that is not configurable. + */ + uint8_t queue_mplstc2pri_cfg_allowed; + /* + * This is the default PRI which un-initialized MPLS values will be + * mapped to. + */ + uint8_t hw_default_pri; + uint8_t unused_0[5]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/****************************** + * hwrm_queue_mplstc2pri_qcfg * + ******************************/ + + +/* hwrm_queue_mplstc2pri_qcfg_input (size:192b/24B) */ +struct hwrm_queue_mplstc2pri_qcfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + /* + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure MPLS TC(EXP) to pri mapping on this port. + */ + uint8_t port_id; + uint8_t unused_0[7]; +} __attribute__((packed)); + +/* hwrm_queue_mplstc2pri_qcfg_output (size:192b/24B) */ +struct hwrm_queue_mplstc2pri_qcfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + /* + * pri assigned to MPLS TC(EXP) 0. This value can only be changed + * before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 0. + */ + uint8_t tc0_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 1. This value can only be changed + * before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 1. + */ + uint8_t tc1_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 2. This value can only be changed + * before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 2. + */ + uint8_t tc2_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 3. This value can only be changed + * before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 3. + */ + uint8_t tc3_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 4. This value can only be changed + * before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 4. + */ + uint8_t tc4_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 5. This value can only be changed + * before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 5. + */ + uint8_t tc5_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 6. This value can only + * be changed before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 6. + */ + uint8_t tc6_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 7. This value can only + * be changed before traffic has started. + * A value of 0xff indicates that no pri is assigned to the + * MPLS TC(EXP) 7. + */ + uint8_t tc7_pri_queue_id; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal processor, + * the order of writes has to be such that this field is written last. + */ + uint8_t valid; +} __attribute__((packed)); + +/***************************** + * hwrm_queue_mplstc2pri_cfg * + *****************************/ + + +/* hwrm_queue_mplstc2pri_cfg_input (size:256b/32B) */ +struct hwrm_queue_mplstc2pri_cfg_input { + /* The HWRM command request type. */ + uint16_t req_type; + /* + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. + */ + uint16_t cmpl_ring; + /* + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. + */ + uint16_t seq_id; + /* + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors + * * 0xFFFD - Reserved for user-space HWRM interface + * * 0xFFFF - HWRM + */ + uint16_t target_id; + /* + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. + */ + uint64_t resp_addr; + uint32_t enables; + /* + * This bit must be '1' for the mplstc0_pri_queue_id field to be + * configured. + */ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC0_PRI_QUEUE_ID \ + UINT32_C(0x1) + /* + * This bit must be '1' for the mplstc1_pri_queue_id field to be + * configured. + */ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC1_PRI_QUEUE_ID \ + UINT32_C(0x2) + /* + * This bit must be '1' for the mplstc2_pri_queue_id field to be + * configured. + */ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC2_PRI_QUEUE_ID \ + UINT32_C(0x4) + /* + * This bit must be '1' for the mplstc3_pri_queue_id field to be + * configured. + */ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC3_PRI_QUEUE_ID \ + UINT32_C(0x8) + /* + * This bit must be '1' for the mplstc4_pri_queue_id field to be + * configured. + */ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC4_PRI_QUEUE_ID \ + UINT32_C(0x10) + /* + * This bit must be '1' for the mplstc5_pri_queue_id field to be + * configured. + */ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC5_PRI_QUEUE_ID \ + UINT32_C(0x20) + /* + * This bit must be '1' for the mplstc6_pri_queue_id field to be + * configured. + */ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC6_PRI_QUEUE_ID \ + UINT32_C(0x40) + /* + * This bit must be '1' for the mplstc7_pri_queue_id field to be + * configured. + */ + #define HWRM_QUEUE_MPLSTC2PRI_CFG_INPUT_ENABLES_TC7_PRI_QUEUE_ID \ + UINT32_C(0x80) + /* + * Port ID of port for which the table is being configured. + * The HWRM needs to check whether this function is allowed + * to configure MPLS TC(EXP)to pri mapping on this port. + */ + uint8_t port_id; + uint8_t unused_0[3]; + /* + * pri assigned to MPLS TC(EXP) 0. This value can only + * be changed before traffic has started. + */ + uint8_t tc0_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 1. This value can only + * be changed before traffic has started. + */ + uint8_t tc1_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 2 This value can only + * be changed before traffic has started. + */ + uint8_t tc2_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 3. This value can only + * be changed before traffic has started. + */ + uint8_t tc3_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 4. This value can only + * be changed before traffic has started. + */ + uint8_t tc4_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 5. This value can only + * be changed before traffic has started. + */ + uint8_t tc5_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 6. This value can only + * be changed before traffic has started. + */ + uint8_t tc6_pri_queue_id; + /* + * pri assigned to MPLS TC(EXP) 7. This value can only + * be changed before traffic has started. + */ + uint8_t tc7_pri_queue_id; +} __attribute__((packed)); + +/* hwrm_queue_mplstc2pri_cfg_output (size:128b/16B) */ +struct hwrm_queue_mplstc2pri_cfg_output { + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; + uint8_t unused_0[7]; + /* + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -21529,7 +22829,13 @@ struct hwrm_vnic_qcfg_output { */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \ UINT32_C(0x40) - uint8_t unused_1[7]; + /* + * When returned with a valid CoS Queue id, the CoS Queue/VNIC association + * is valid. Otherwise it will return 0xFFFF to indicate no VNIC/CoS + * queue association. + */ + uint16_t queue_id; + uint8_t unused_1[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' @@ -22040,6 +23346,27 @@ struct hwrm_vnic_rss_cfg_output { uint8_t valid; } __attribute__((packed)); +/* hwrm_vnic_rss_cfg_cmd_err (size:64b/8B) */ +struct hwrm_vnic_rss_cfg_cmd_err { + /* + * command specific error codes that goes to + * the cmd_err field in Common HWRM Error Response. + */ + uint8_t code; + /* Unknown error */ + #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_UNKNOWN \ + UINT32_C(0x0) + /* + * Unable to change global RSS mode to outer due to all active + * interfaces are not ready to support outer RSS hashing. + */ + #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_INTERFACE_NOT_READY \ + UINT32_C(0x1) + #define HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_LAST \ + HWRM_VNIC_RSS_CFG_CMD_ERR_CODE_INTERFACE_NOT_READY + uint8_t unused_0[7]; +} __attribute__((packed)); + /********************** * hwrm_vnic_rss_qcfg * **********************/ @@ -22308,7 +23635,7 @@ struct hwrm_vnic_plcmodes_cfg_input { /* * This value is used to determine the offset into * packet buffer where the split data (payload) will be - * placed according to one of of HDS placement algorithm. + * placed according to one of HDS placement algorithm. * * The lengths of packet buffers provided for split data * shall be larger than this value. @@ -22450,7 +23777,7 @@ struct hwrm_vnic_plcmodes_qcfg_output { /* * This value is used to determine the offset into * packet buffer where the split data (payload) will be - * placed according to one of of HDS placement algorithm. + * placed according to one of HDS placement algorithm. * * The lengths of packet buffers provided for split data * shall be larger than this value. @@ -23768,7 +25095,7 @@ struct hwrm_cfa_l2_filter_alloc_input { UINT32_C(0x40) /* * Setting this flag to 1 indicate the L2 fields in this command - * pertain to source fields. Setting this flag to 0 indicate the + * pertain to source fields. Setting this flag to 0 indicate the * L2 fields in this command pertain to the destination fields * and this is the default/legacy behavior. */ @@ -24010,7 +25337,7 @@ struct hwrm_cfa_l2_filter_alloc_input { /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ @@ -24142,7 +25469,7 @@ struct hwrm_cfa_l2_filter_alloc_output { uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -24205,7 +25532,7 @@ struct hwrm_cfa_l2_filter_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -24333,7 +25660,7 @@ struct hwrm_cfa_l2_filter_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -24515,7 +25842,7 @@ struct hwrm_cfa_l2_set_rx_mask_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -24608,7 +25935,7 @@ struct hwrm_cfa_vlan_antispoof_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -24688,7 +26015,7 @@ struct hwrm_cfa_vlan_antispoof_qcfg_output { uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -24863,7 +26190,7 @@ struct hwrm_cfa_tunnel_filter_alloc_input { /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ @@ -24998,7 +26325,7 @@ struct hwrm_cfa_tunnel_filter_alloc_output { uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -25058,7 +26385,7 @@ struct hwrm_cfa_tunnel_filter_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -25123,7 +26450,7 @@ struct hwrm_cfa_redirect_tunnel_type_alloc_input { /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ @@ -25170,7 +26497,7 @@ struct hwrm_cfa_redirect_tunnel_type_alloc_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -25235,7 +26562,7 @@ struct hwrm_cfa_redirect_tunnel_type_free_input { /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ @@ -25277,7 +26604,7 @@ struct hwrm_cfa_redirect_tunnel_type_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -25342,7 +26669,7 @@ struct hwrm_cfa_redirect_tunnel_type_info_input { /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ @@ -25386,7 +26713,7 @@ struct hwrm_cfa_redirect_tunnel_type_info_output { uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -25564,7 +26891,7 @@ struct hwrm_cfa_encap_record_alloc_input { /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_GENEVE \ UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_MPLS \ UINT32_C(0x6) /* VLAN */ @@ -25607,7 +26934,7 @@ struct hwrm_cfa_encap_record_alloc_output { uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -25668,7 +26995,7 @@ struct hwrm_cfa_encap_record_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -25681,7 +27008,7 @@ struct hwrm_cfa_encap_record_free_output { ********************************/ -/* hwrm_cfa_ntuple_filter_alloc_input (size:1088b/136B) */ +/* hwrm_cfa_ntuple_filter_alloc_input (size:1024b/128B) */ struct hwrm_cfa_ntuple_filter_alloc_input { /* The HWRM command request type. */ uint16_t req_type; @@ -25729,11 +27056,25 @@ struct hwrm_cfa_ntuple_filter_alloc_input { #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \ UINT32_C(0x4) /* - * Setting of this flag indicates that the dest_id field contains function ID. + * Setting of this flag indicates that the dst_id field contains function ID. * If this is not set it indicates dest_id is VNIC or VPORT. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_FID \ UINT32_C(0x8) + /* + * Setting of this flag indicates match on arp reply when ethertype is 0x0806. + * If this is not set it indicates no specific arp opcode matching. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_ARP_REPLY \ + UINT32_C(0x10) + /* + * Setting of this flag indicates that the dst_id field contains RFS ring + * table index. If this is not set it indicates dst_id is VNIC or VPORT + * or function ID. Note dest_fid and dest_rfs_ring_idx can’t be set at + * the same time. + */ + #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DEST_RFS_RING_IDX \ + UINT32_C(0x20) uint32_t enables; /* * This bit must be '1' for the l2_filter_id field to be @@ -25849,10 +27190,7 @@ struct hwrm_cfa_ntuple_filter_alloc_input { */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \ UINT32_C(0x40000) - /* - * This bit must be '1' for the rfs_ring_tbl_idx field to be - * configured. - */ + /* This flag is deprecated. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_RFS_RING_TBL_IDX \ UINT32_C(0x80000) /* @@ -25942,7 +27280,7 @@ struct hwrm_cfa_ntuple_filter_alloc_input { /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ @@ -26038,13 +27376,6 @@ struct hwrm_cfa_ntuple_filter_alloc_input { * the pri_hint. */ uint64_t ntuple_filter_id_hint; - /* - * The value of rfs_ring_tbl_idx to be used for RFS for this filter. - * This index is used in lieu of the RSS hash when selecting the - * index into the RSS table to determine the rx ring. - */ - uint16_t rfs_ring_tbl_idx; - uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_cfa_ntuple_filter_alloc_output (size:192b/24B) */ @@ -26102,7 +27433,7 @@ struct hwrm_cfa_ntuple_filter_alloc_output { uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -26180,7 +27511,7 @@ struct hwrm_cfa_ntuple_filter_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -26249,6 +27580,14 @@ struct hwrm_cfa_ntuple_filter_cfg_input { */ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_FID \ UINT32_C(0x1) + /* + * Setting of this flag indicates that the new_dst_id field contains + * RFS ring table index. If this is not set it indicates new_dst_id is + * VNIC or VPORT or function ID. Note dest_fid and dest_rfs_ring_idx + * can’t be set at the same time. + */ + #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_FLAGS_DEST_RFS_RING_IDX \ + UINT32_C(0x2) /* This value is an opaque id into CFA data structures. */ uint64_t ntuple_filter_id; /* @@ -26293,7 +27632,7 @@ struct hwrm_cfa_ntuple_filter_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -26508,7 +27847,7 @@ struct hwrm_cfa_em_flow_alloc_input { /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ @@ -26699,7 +28038,7 @@ struct hwrm_cfa_em_flow_alloc_output { uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -26759,7 +28098,7 @@ struct hwrm_cfa_em_flow_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -26872,7 +28211,7 @@ struct hwrm_cfa_meter_qcaps_output { uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -27150,7 +28489,7 @@ struct hwrm_cfa_meter_profile_alloc_output { uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -27235,7 +28574,7 @@ struct hwrm_cfa_meter_profile_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -27506,7 +28845,7 @@ struct hwrm_cfa_meter_profile_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -27602,7 +28941,7 @@ struct hwrm_cfa_meter_instance_alloc_output { uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -27695,7 +29034,7 @@ struct hwrm_cfa_meter_instance_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -27780,7 +29119,7 @@ struct hwrm_cfa_meter_instance_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -27958,7 +29297,7 @@ struct hwrm_cfa_decap_filter_alloc_input { /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ @@ -28105,7 +29444,7 @@ struct hwrm_cfa_decap_filter_alloc_output { uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -28166,7 +29505,7 @@ struct hwrm_cfa_decap_filter_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -28326,7 +29665,7 @@ struct hwrm_cfa_flow_alloc_input { UINT32_C(0x800) /* * If set to 1 an attempt will be made to try to offload this flow to the - * most optimal flow table resource. If set to 0, the flow will be + * most optimal flow table resource. If set to 0, the flow will be * placed to the default flow table resource. */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_PRI_HINT \ @@ -28335,7 +29674,7 @@ struct hwrm_cfa_flow_alloc_input { * If set to 1 there will be no attempt to allocate an on-chip try to * offload this flow. If set to 0, which will keep compatibility with the * older drivers, will cause the FW to attempt to allocate an on-chip flow - * counter for the newly created flow. This will keep the existing behavior + * counter for the newly created flow. This will keep the existing behavior * with EM flows which always had an associated flow counter. */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NO_FLOW_COUNTER_ALLOC \ @@ -28428,7 +29767,7 @@ struct hwrm_cfa_flow_alloc_input { /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ @@ -28515,7 +29854,7 @@ struct hwrm_cfa_flow_alloc_output { uint8_t unused_1[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -28612,7 +29951,7 @@ struct hwrm_cfa_flow_free_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -28651,10 +29990,10 @@ struct hwrm_cfa_flow_action_data { /* If set to 1, flow aging is enabled for this flow. */ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_FLOW_AGING_ENABLED \ UINT32_C(0x80) - /* Setting of this flag indicates encap action.. */ + /* Setting of this flag indicates encap action. */ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_ENCAP \ UINT32_C(0x100) - /* Setting of this flag indicates decap action.. */ + /* Setting of this flag indicates decap action. */ #define HWRM_CFA_FLOW_ACTION_DATA_ACTION_FLAGS_DECAP \ UINT32_C(0x200) /* Meter id. */ @@ -28680,7 +30019,7 @@ struct hwrm_cfa_flow_action_data { #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_IPIP UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_GENEVE UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_MPLS UINT32_C(0x6) /* VLAN */ #define HWRM_CFA_FLOW_ACTION_DATA_ENCAP_TYPE_VLAN UINT32_C(0x7) @@ -28723,7 +30062,7 @@ struct hwrm_cfa_flow_tunnel_hdr_data { /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_FLOW_TUNNEL_HDR_DATA_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ @@ -28946,7 +30285,7 @@ struct hwrm_cfa_flow_info_output { uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -29001,7 +30340,7 @@ struct hwrm_cfa_flow_flush_input { UINT32_C(0x1) /* * Set to 1 to indicate flow flush operation to cleanup all the flows, meters, CFA - * context memory tables..etc. This flag is set to 0 by older driver. For older firmware, + * context memory tables etc. This flag is set to 0 by older driver. For older firmware, * setting this flag has no effect. */ #define HWRM_CFA_FLOW_FLUSH_INPUT_FLAGS_FLOW_RESET_ALL \ @@ -29080,7 +30419,7 @@ struct hwrm_cfa_flow_flush_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -29221,7 +30560,7 @@ struct hwrm_cfa_flow_stats_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -29289,7 +30628,7 @@ struct hwrm_cfa_flow_aging_timer_reset_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -29414,7 +30753,7 @@ struct hwrm_cfa_flow_aging_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -29499,7 +30838,7 @@ struct hwrm_cfa_flow_aging_qcfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -29576,7 +30915,7 @@ struct hwrm_cfa_flow_aging_qcaps_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -29642,7 +30981,7 @@ struct hwrm_cfa_tcp_flag_process_qcfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -29763,7 +31102,7 @@ struct hwrm_cfa_pair_info_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -29841,7 +31180,7 @@ struct hwrm_cfa_redirect_query_tunnel_type_output { /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_GENEVE \ UINT32_C(0x20) - /* Multi-Protocol Lable Switching (MPLS) */ + /* Multi-Protocol Label Switching (MPLS) */ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_MPLS \ UINT32_C(0x40) /* Stateless Transport Tunnel (STT) */ @@ -29868,7 +31207,7 @@ struct hwrm_cfa_redirect_query_tunnel_type_output { uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -29958,14 +31297,14 @@ struct hwrm_cfa_ctx_mem_rgtr_output { /* The length of the response data in number of bytes. */ uint16_t resp_len; /* - * Id/Handle to the recently register context memory. This handle is passed + * Id/Handle to the recently register context memory. This handle is passed * to the CFA feature. */ uint16_t ctx_id; uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -30009,7 +31348,7 @@ struct hwrm_cfa_ctx_mem_unrgtr_input { */ uint64_t resp_addr; /* - * Id/Handle to the recently register context memory. This handle is passed + * Id/Handle to the recently register context memory. This handle is passed * to the CFA feature. */ uint16_t ctx_id; @@ -30029,7 +31368,7 @@ struct hwrm_cfa_ctx_mem_unrgtr_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -30073,7 +31412,7 @@ struct hwrm_cfa_ctx_mem_qctx_input { */ uint64_t resp_addr; /* - * Id/Handle to the recently register context memory. This handle is passed + * Id/Handle to the recently register context memory. This handle is passed * to the CFA feature. */ uint16_t ctx_id; @@ -30127,7 +31466,7 @@ struct hwrm_cfa_ctx_mem_qctx_output { uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -30187,7 +31526,7 @@ struct hwrm_cfa_ctx_mem_qcaps_output { uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -30278,15 +31617,15 @@ struct hwrm_cfa_eem_qcaps_output { UINT32_C(0x2) /* * When set to 1, indicates the the FW supports the Centralized - * Memory Model. The concept designates one entity for the + * Memory Model. The concept designates one entity for the * memory allocation while all others ‘subscribe’ to it. */ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \ UINT32_C(0x4) /* * When set to 1, indicates the the FW supports the Detached - * Centralized Memory Model. The memory is allocated and managed - * as a separate entity. All PFs and VFs will be granted direct + * Centralized Memory Model. The memory is allocated and managed + * as a separate entity. All PFs and VFs will be granted direct * or semi-direct access to the allocated memory while none of * which can interfere with the management of the memory. */ @@ -30326,7 +31665,7 @@ struct hwrm_cfa_eem_qcaps_output { #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \ UINT32_C(0x10) /* - * The maximum number of entries supported by EEM. When configuring the host memory + * The maximum number of entries supported by EEM. When configuring the host memory * the number of numbers of entries that can supported are - * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M, 128M entries. * Any value that are not these values, the FW will round down to the closest support @@ -30344,7 +31683,7 @@ struct hwrm_cfa_eem_qcaps_output { uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -30415,9 +31754,9 @@ struct hwrm_cfa_eem_cfg_input { uint16_t group_id; uint16_t unused_0; /* - * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1, + * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1, * RECORD, EFC all have the same number of entries and all tables will be configured - * using this value. Current minimum value is 32k. Current maximum value is 128M. + * using this value. Current minimum value is 32k. Current maximum value is 128M. */ uint32_t num_entries; uint32_t unused_1; @@ -30448,7 +31787,7 @@ struct hwrm_cfa_eem_cfg_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -30534,7 +31873,7 @@ struct hwrm_cfa_eem_qcfg_output { uint8_t unused_2[5]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -30597,7 +31936,7 @@ struct hwrm_cfa_eem_op_input { #define HWRM_CFA_EEM_OP_INPUT_OP_RESERVED UINT32_C(0x0) /* * To properly stop EEM and ensure there are no DMA's, the caller - * must disable EEM for the given PF, using this call. This will + * must disable EEM for the given PF, using this call. This will * safely disable EEM and ensure that all DMA'ed to the * keys/records/efc have been completed. */ @@ -30605,7 +31944,7 @@ struct hwrm_cfa_eem_op_input { /* * Once the EEM host memory has been configured, EEM options have * been configured. Then the caller should enable EEM for the given - * PF. Note once this call has been made, then the EEM mechanism + * PF. Note once this call has been made, then the EEM mechanism * will be active and DMA's will occur as packets are processed. */ #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_ENABLE UINT32_C(0x2) @@ -30631,7 +31970,7 @@ struct hwrm_cfa_eem_op_output { uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -30770,10 +32109,34 @@ struct hwrm_cfa_adv_flow_mgnt_qcaps_output { */ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_L2_HEADER_SOURCE_FIELDS_SUPPORTED \ UINT32_C(0x800) + /* + * If set to 1, firmware is capable of supporting ARP ethertype as + * matching criteria for HWRM_CFA_NTUPLE_FILTER_ALLOC command on the + * RX direction. By default, this flag should be 0 for older version + * of firmware. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ARP_SUPPORTED \ + UINT32_C(0x1000) + /* + * Value of 1 to indicate that firmware supports setting of + * rfs_ring_tbl_idx in dst_id field of the HWRM_CFA_NTUPLE_ALLOC + * command. Value of 0 indicates firmware does not support + * rfs_ring_tbl_idx in dst_id field. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RFS_RING_TBL_IDX_V2_SUPPORTED \ + UINT32_C(0x2000) + /* + * If set to 1, firmware is capable of supporting IPv4/IPv6 as + * ethertype in HWRM_CFA_NTUPLE_FILTER_ALLOC command on the RX + * direction. By default, this flag should be 0 for older version + * of firmware. + */ + #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ETHERTYPE_IP_SUPPORTED \ + UINT32_C(0x4000) uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -30848,7 +32211,7 @@ struct hwrm_cfa_tflib_output { uint8_t unused1[7]; /* * This field is used in Output records to indicate that the output - * is completely written to RAM. This field should be read as '1' + * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. @@ -31792,11 +33155,11 @@ struct pcie_ctx_hw_stats { uint64_t pcie_tl_signal_integrity; /* Number of times LTSSM entered Recovery state */ uint64_t pcie_link_integrity; - /* Number of TLP bytes that have been trasmitted */ + /* Number of TLP bytes that have been transmitted */ uint64_t pcie_tx_traffic_rate; /* Number of TLP bytes that have been received */ uint64_t pcie_rx_traffic_rate; - /* Number of DLLP bytes that have been trasmitted */ + /* Number of DLLP bytes that have been transmitted */ uint64_t pcie_tx_dllp_statistics; /* Number of DLLP bytes that have been received */ uint64_t pcie_rx_dllp_statistics; @@ -32158,7 +33521,7 @@ struct hwrm_nvm_raw_write_blk_input { uint64_t resp_addr; /* * 64-bit Host Source Address. - * This is the loation of the source data to be written. + * This is the location of the source data to be written. */ uint64_t host_src_addr; /* @@ -32523,7 +33886,7 @@ struct hwrm_nvm_write_input { * The requested length of the allocated NVM for the item, in bytes. This value may be greater than or equal to the specified data length (dir_data_length). * If this value is less than the specified data length, it will be ignored. * The response will contain the actual allocated item length, which may be greater than the requested item length. - * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accomodate + * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accommodate * the potential future growth of an item (e.g. upgraded firmware with a size increase, log growth, expanded configuration data). */ uint32_t dir_item_length; @@ -33105,7 +34468,7 @@ struct hwrm_nvm_install_update_input { #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ERASE_UNUSED_SPACE \ UINT32_C(0x1) /* - * If set to 1, then unspecifed images, images not in the package file, will be safely deleted. + * If set to 1, then unspecified images, images not in the package file, will be safely deleted. * When combined with erase_unused_space then unspecified images will be securely erased. */ #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_REMOVE_UNUSED_PKG \