From: Andrew Rybchenko Date: Fri, 5 Apr 2019 12:05:07 +0000 (+0100) Subject: net/sfc: improve Rx free threshold default X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=06b186a01da186f079588479ebfe0acec208345c;p=dpdk.git net/sfc: improve Rx free threshold default Rx refill in one bulk (which is just 8 descriptors) by default is too aggressive and makes too many MMIO writes (Rx doorbells) if packet rate is high. Setting default to 1/8 of Rx descriptors number shows good performance results. Anyway it is a default value which may be overridden by Rx configuration provided by application. Signed-off-by: Andrew Rybchenko --- diff --git a/drivers/net/sfc/sfc_rx.c b/drivers/net/sfc/sfc_rx.c index 4b1d01e66d..5d8c2765c8 100644 --- a/drivers/net/sfc/sfc_rx.c +++ b/drivers/net/sfc/sfc_rx.c @@ -974,6 +974,7 @@ sfc_rx_qinit(struct sfc_adapter *sa, unsigned int sw_index, struct sfc_rxq *rxq; struct sfc_dp_rx_qcreate_info info; struct sfc_dp_rx_hw_limits hw_limits; + uint16_t rx_free_thresh; memset(&hw_limits, 0, sizeof(hw_limits)); hw_limits.rxq_max_entries = sa->rxq_max_entries; @@ -1043,8 +1044,22 @@ sfc_rx_qinit(struct sfc_adapter *sa, unsigned int sw_index, rxq = &sa->rxq_ctrl[sw_index]; rxq->evq = evq; rxq->hw_index = sw_index; + /* + * If Rx refill threshold is specified (its value is non zero) in + * Rx configuration, use specified value. Otherwise use 1/8 of + * the Rx descriptors number as the default. It allows to keep + * Rx ring full-enough and does not refill too aggressive if + * packet rate is high. + * + * Since PMD refills in bulks waiting for full bulk may be + * refilled (basically round down), it is better to round up + * here to mitigate it a bit. + */ + rx_free_thresh = (rx_conf->rx_free_thresh != 0) ? + rx_conf->rx_free_thresh : EFX_DIV_ROUND_UP(nb_rx_desc, 8); + /* Rx refill threshold cannot be smaller than refill bulk */ rxq_info->refill_threshold = - RTE_MAX(rx_conf->rx_free_thresh, SFC_RX_REFILL_BULK); + RTE_MAX(rx_free_thresh, SFC_RX_REFILL_BULK); rxq_info->refill_mb_pool = mb_pool; rxq->buf_size = buf_size;