From: Thomas Monjalon Date: Mon, 30 Aug 2021 10:42:32 +0000 (+0200) Subject: ethdev: group constant definitions in Doxygen X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=0ce56b057b5ceba9fc4f31d837aa2cd788e468cf;p=dpdk.git ethdev: group constant definitions in Doxygen A lot of flags are parts of a group but are documented alone. The Doxygen syntax @{ and @} for grouping is used to make flags appear together and have a common description. Some Rx/Tx offload flags and RSS definitions are not grouped because they need to be all properly documented first. Signed-off-by: Thomas Monjalon Acked-by: Ferruh Yigit Acked-by: Andrew Rybchenko Acked-by: Kevin Traynor --- diff --git a/lib/ethdev/rte_ethdev.h b/lib/ethdev/rte_ethdev.h index 3c8af317d1..afdc53b674 100644 --- a/lib/ethdev/rte_ethdev.h +++ b/lib/ethdev/rte_ethdev.h @@ -276,7 +276,7 @@ struct rte_eth_stats { /**< Total number of queue packets received that are dropped. */ }; -/** +/**@{@name Link speed capabilities * Device supported speeds bitmap flags */ #define ETH_LINK_SPEED_AUTONEG (0 << 0) /**< Autonegotiate (all speeds) */ @@ -296,8 +296,9 @@ struct rte_eth_stats { #define ETH_LINK_SPEED_56G (1 << 13) /**< 56 Gbps */ #define ETH_LINK_SPEED_100G (1 << 14) /**< 100 Gbps */ #define ETH_LINK_SPEED_200G (1 << 15) /**< 200 Gbps */ +/**@}*/ -/** +/**@{@name Link speed * Ethernet numeric link speeds in Mbps */ #define ETH_SPEED_NUM_NONE 0 /**< Not defined */ @@ -315,6 +316,7 @@ struct rte_eth_stats { #define ETH_SPEED_NUM_100G 100000 /**< 100 Gbps */ #define ETH_SPEED_NUM_200G 200000 /**< 200 Gbps */ #define ETH_SPEED_NUM_UNKNOWN UINT32_MAX /**< Unknown */ +/**@}*/ /** * A structure used to retrieve link-level information of an Ethernet port. @@ -327,7 +329,9 @@ struct rte_eth_link { uint16_t link_status : 1; /**< ETH_LINK_[DOWN/UP] */ } __rte_aligned(8); /**< aligned for atomic64 read/write */ -/* Utility constants */ +/**@{@name Link negotiation + * Constants used in link management. + */ #define ETH_LINK_HALF_DUPLEX 0 /**< Half-duplex connection (see link_duplex). */ #define ETH_LINK_FULL_DUPLEX 1 /**< Full-duplex connection (see link_duplex). */ #define ETH_LINK_DOWN 0 /**< Link is down (see link_status). */ @@ -335,6 +339,7 @@ struct rte_eth_link { #define ETH_LINK_FIXED 0 /**< No autonegotiation (see link_autoneg). */ #define ETH_LINK_AUTONEG 1 /**< Autonegotiated (see link_autoneg). */ #define RTE_ETH_LINK_MAX_STR_LEN 40 /**< Max length of default link string. */ +/**@}*/ /** * A structure used to configure the ring threshold registers of an RX/TX @@ -346,12 +351,13 @@ struct rte_eth_thresh { uint8_t wthresh; /**< Ring writeback threshold. */ }; -/** - * Simple flags are used for rte_eth_conf.rxmode.mq_mode. +/**@{@name Multi-queue mode + * @see rte_eth_conf.rxmode.mq_mode. */ -#define ETH_MQ_RX_RSS_FLAG 0x1 -#define ETH_MQ_RX_DCB_FLAG 0x2 -#define ETH_MQ_RX_VMDQ_FLAG 0x4 +#define ETH_MQ_RX_RSS_FLAG 0x1 /**< Enable RSS. @see rte_eth_rss_conf */ +#define ETH_MQ_RX_DCB_FLAG 0x2 /**< Enable DCB. */ +#define ETH_MQ_RX_VMDQ_FLAG 0x4 /**< Enable VMDq. */ +/**@}*/ /** * A set of values to identify what method is to be used to route @@ -797,28 +803,30 @@ rte_eth_rss_hf_refine(uint64_t rss_hf) #define ETH_RSS_RETA_SIZE_512 512 #define RTE_RETA_GROUP_SIZE 64 -/* Definitions used for VMDQ and DCB functionality */ +/**@{@name VMDq and DCB maximums */ #define ETH_VMDQ_MAX_VLAN_FILTERS 64 /**< Maximum nb. of VMDQ vlan filters. */ #define ETH_DCB_NUM_USER_PRIORITIES 8 /**< Maximum nb. of DCB priorities. */ #define ETH_VMDQ_DCB_NUM_QUEUES 128 /**< Maximum nb. of VMDQ DCB queues. */ #define ETH_DCB_NUM_QUEUES 128 /**< Maximum nb. of DCB queues. */ +/**@}*/ -/* DCB capability defines */ +/**@{@name DCB capabilities */ #define ETH_DCB_PG_SUPPORT 0x00000001 /**< Priority Group(ETS) support. */ #define ETH_DCB_PFC_SUPPORT 0x00000002 /**< Priority Flow Control support. */ +/**@}*/ -/* Definitions used for VLAN Offload functionality */ +/**@{@name VLAN offload bits */ #define ETH_VLAN_STRIP_OFFLOAD 0x0001 /**< VLAN Strip On/Off */ #define ETH_VLAN_FILTER_OFFLOAD 0x0002 /**< VLAN Filter On/Off */ #define ETH_VLAN_EXTEND_OFFLOAD 0x0004 /**< VLAN Extend On/Off */ #define ETH_QINQ_STRIP_OFFLOAD 0x0008 /**< QINQ Strip On/Off */ -/* Definitions used for mask VLAN setting */ #define ETH_VLAN_STRIP_MASK 0x0001 /**< VLAN Strip setting mask */ #define ETH_VLAN_FILTER_MASK 0x0002 /**< VLAN Filter setting mask*/ #define ETH_VLAN_EXTEND_MASK 0x0004 /**< VLAN Extend setting mask*/ #define ETH_QINQ_STRIP_MASK 0x0008 /**< QINQ Strip setting mask */ #define ETH_VLAN_ID_MAX 0x0FFF /**< VLAN ID is in lower 12 bits*/ +/**@}*/ /* Definitions used for receive MAC address */ #define ETH_NUM_RECEIVE_MAC_ADDR 128 /**< Maximum nb. of receive mac addr. */ @@ -826,21 +834,28 @@ rte_eth_rss_hf_refine(uint64_t rss_hf) /* Definitions used for unicast hash */ #define ETH_VMDQ_NUM_UC_HASH_ARRAY 128 /**< Maximum nb. of UC hash array. */ -/* Definitions used for VMDQ pool rx mode setting */ +/**@{@name VMDq Rx mode + * @see rte_eth_vmdq_rx_conf.rx_mode + */ #define ETH_VMDQ_ACCEPT_UNTAG 0x0001 /**< accept untagged packets. */ #define ETH_VMDQ_ACCEPT_HASH_MC 0x0002 /**< accept packets in multicast table . */ #define ETH_VMDQ_ACCEPT_HASH_UC 0x0004 /**< accept packets in unicast table. */ #define ETH_VMDQ_ACCEPT_BROADCAST 0x0008 /**< accept broadcast packets. */ #define ETH_VMDQ_ACCEPT_MULTICAST 0x0010 /**< multicast promiscuous. */ +/**@}*/ /** Maximum nb. of vlan per mirror rule */ #define ETH_MIRROR_MAX_VLANS 64 +/**@{@name Mirroring type + * @see rte_eth_mirror_conf.rule_type + */ #define ETH_MIRROR_VIRTUAL_POOL_UP 0x01 /**< Virtual Pool uplink Mirroring. */ #define ETH_MIRROR_UPLINK_PORT 0x02 /**< Uplink Port Mirroring. */ #define ETH_MIRROR_DOWNLINK_PORT 0x04 /**< Downlink Port Mirroring. */ #define ETH_MIRROR_VLAN 0x08 /**< VLAN Mirroring. */ #define ETH_MIRROR_VIRTUAL_POOL_DOWN 0x10 /**< Virtual Pool downlink Mirroring. */ +/**@}*/ /** * A structure used to configure VLAN traffic mirror of an Ethernet port. @@ -1602,12 +1617,11 @@ struct rte_eth_dev_info { void *reserved_ptrs[2]; /**< Reserved for future fields */ }; -/** - * RX/TX queue states - */ -#define RTE_ETH_QUEUE_STATE_STOPPED 0 -#define RTE_ETH_QUEUE_STATE_STARTED 1 -#define RTE_ETH_QUEUE_STATE_HAIRPIN 2 +/**@{@name Rx/Tx queue states */ +#define RTE_ETH_QUEUE_STATE_STOPPED 0 /**< Queue stopped. */ +#define RTE_ETH_QUEUE_STATE_STARTED 1 /**< Queue started. */ +#define RTE_ETH_QUEUE_STATE_HAIRPIN 2 /**< Queue used for hairpin. */ +/**@}*/ /** * Ethernet device RX queue information structure. @@ -1759,10 +1773,7 @@ struct rte_eth_fec_capa { } \ } while (0) -/** - * l2 tunnel configuration. - */ - +/**@{@name L2 tunnel configuration */ /**< l2 tunnel enable mask */ #define ETH_L2_TUNNEL_ENABLE_MASK 0x00000001 /**< l2 tunnel insertion mask */ @@ -1771,6 +1782,7 @@ struct rte_eth_fec_capa { #define ETH_L2_TUNNEL_STRIPPING_MASK 0x00000004 /**< l2 tunnel forwarding mask */ #define ETH_L2_TUNNEL_FORWARDING_MASK 0x00000008 +/**@}*/ /** * Function type used for RX packet processing packet callbacks. @@ -1852,6 +1864,10 @@ struct rte_eth_dev_owner { char name[RTE_ETH_MAX_OWNER_NAME_LEN]; /**< The owner name. */ }; +/**@{@name Device flags + * Flags internally saved in rte_eth_dev_data.dev_flags + * and reported in rte_eth_dev_info.dev_flags. + */ /** PMD supports thread-safe flow operations */ #define RTE_ETH_DEV_FLOW_OPS_THREAD_SAFE 0x0001 /** Device supports link state interrupt */ @@ -1869,6 +1885,7 @@ struct rte_eth_dev_owner { * PMDs filling the queue xstats themselves should not set this flag */ #define RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS 0x0040 +/**@}*/ /** * Iterates over valid ethdev ports owned by a specific owner. @@ -5071,9 +5088,13 @@ rte_eth_rx_descriptor_done(uint16_t port_id, uint16_t queue_id, uint16_t offset) return (*dev->rx_descriptor_done)(dev->data->rx_queues[queue_id], offset); } +/**@{@name Rx hardware descriptor states + * @see rte_eth_rx_descriptor_status + */ #define RTE_ETH_RX_DESC_AVAIL 0 /**< Desc available for hw. */ #define RTE_ETH_RX_DESC_DONE 1 /**< Desc done, filled by hw. */ #define RTE_ETH_RX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */ +/**@}*/ /** * Check the status of a Rx descriptor in the queue @@ -5129,9 +5150,13 @@ rte_eth_rx_descriptor_status(uint16_t port_id, uint16_t queue_id, return (*dev->rx_descriptor_status)(rxq, offset); } +/**@{@name Tx hardware descriptor states + * @see rte_eth_tx_descriptor_status + */ #define RTE_ETH_TX_DESC_FULL 0 /**< Desc filled for hw, waiting xmit. */ #define RTE_ETH_TX_DESC_DONE 1 /**< Desc done, packet is transmitted. */ #define RTE_ETH_TX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */ +/**@}*/ /** * Check the status of a Tx descriptor in the queue.