From: Harry van Haaren Date: Thu, 6 Jul 2017 14:35:15 +0000 (+0100) Subject: doc: add SW eventdev pipeline to sample app guide X-Git-Tag: spdx-start~2611 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=1094ca96689cc4c0c5671a827aaf9259e4f526c4;p=dpdk.git doc: add SW eventdev pipeline to sample app guide Add a new entry in the sample app user-guides, which details the working of the eventdev_pipeline_sw. Signed-off-by: Harry van Haaren Signed-off-by: David Hunt Acked-by: John McNamara Acked-by: Jerin Jacob --- diff --git a/MAINTAINERS b/MAINTAINERS index 82579ec74a..1de1780b6f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -590,6 +590,7 @@ F: drivers/event/sw/ F: test/test/test_eventdev_sw.c F: doc/guides/eventdevs/sw.rst F: examples/eventdev_pipeline_sw_pmd/ +F: doc/guides/sample_app_ug/eventdev_pipeline_sw_pmd.rst Packet processing diff --git a/doc/guides/sample_app_ug/eventdev_pipeline_sw_pmd.rst b/doc/guides/sample_app_ug/eventdev_pipeline_sw_pmd.rst new file mode 100644 index 0000000000..b1b18dd0f2 --- /dev/null +++ b/doc/guides/sample_app_ug/eventdev_pipeline_sw_pmd.rst @@ -0,0 +1,190 @@ + +.. BSD LICENSE + Copyright(c) 2017 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +Eventdev Pipeline SW PMD Sample Application +=========================================== + +The eventdev pipeline sample application is a sample app that demonstrates +the usage of the eventdev API using the software PMD. It shows how an +application can configure a pipeline and assign a set of worker cores to +perform the processing required. + +The application has a range of command line arguments allowing it to be +configured for various numbers worker cores, stages,queue depths and cycles per +stage of work. This is useful for performance testing as well as quickly testing +a particular pipeline configuration. + + +Compiling the Application +------------------------- + +To compile the application: + +#. Go to the sample application directory: + + .. code-block:: console + + export RTE_SDK=/path/to/rte_sdk + cd ${RTE_SDK}/examples/eventdev_pipeline_sw_pmd + +#. Set the target (a default target is used if not specified). For example: + + .. code-block:: console + + export RTE_TARGET=x86_64-native-linuxapp-gcc + + See the *DPDK Getting Started Guide* for possible RTE_TARGET values. + +#. Build the application: + + .. code-block:: console + + make + +Running the Application +----------------------- + +The application has a lot of command line options. This allows specification of +the eventdev PMD to use, and a number of attributes of the processing pipeline +options. + +An example eventdev pipeline running with the software eventdev PMD using +these settings is shown below: + + * ``-r1``: core mask 0x1 for RX + * ``-t1``: core mask 0x1 for TX + * ``-e4``: core mask 0x4 for the software scheduler + * ``-w FF00``: core mask for worker cores, 8 cores from 8th to 16th + * ``-s4``: 4 atomic stages + * ``-n0``: process infinite packets (run forever) + * ``-c32``: worker dequeue depth of 32 + * ``-W1000``: do 1000 cycles of work per packet in each stage + * ``-D``: dump statistics on exit + +.. code-block:: console + + ./build/eventdev_pipeline_sw_pmd --vdev event_sw0 -- -r1 -t1 -e4 -w FF00 -s4 -n0 -c32 -W1000 -D + +The application has some sanity checking built-in, so if there is a function +(eg; the RX core) which doesn't have a cpu core mask assigned, the application +will print an error message: + +.. code-block:: console + + Core part of pipeline was not assigned any cores. This will stall the + pipeline, please check core masks (use -h for details on setting core masks): + rx: 0 + tx: 1 + +Configuration of the eventdev is covered in detail in the programmers guide, +see the Event Device Library section. + + +Observing the Application +------------------------- + +At runtime the eventdev pipeline application prints out a summary of the +configuration, and some runtime statistics like packets per second. On exit the +worker statistics are printed, along with a full dump of the PMD statistics if +required. The following sections show sample output for each of the output +types. + +Configuration +~~~~~~~~~~~~~ + +This provides an overview of the pipeline, +scheduling type at each stage, and parameters to options such as how many +flows to use and what eventdev PMD is in use. See the following sample output +for details: + +.. code-block:: console + + Config: + ports: 2 + workers: 8 + packets: 0 + priorities: 1 + Queue-prio: 0 + qid0 type: atomic + Cores available: 44 + Cores used: 10 + Eventdev 0: event_sw + Stages: + Stage 0, Type Atomic Priority = 128 + Stage 1, Type Atomic Priority = 128 + Stage 2, Type Atomic Priority = 128 + Stage 3, Type Atomic Priority = 128 + +Runtime +~~~~~~~ + +At runtime, the statistics of the consumer are printed, stating the number of +packets received, runtime in milliseconds, average mpps, and current mpps. + +.. code-block:: console + + # consumer RX= xxxxxxx, time yyyy ms, avg z.zzz mpps [current w.www mpps] + +Shutdown +~~~~~~~~ + +At shutdown, the application prints the number of packets received and +transmitted, and an overview of the distribution of work across worker cores. + +.. code-block:: console + + Signal 2 received, preparing to exit... + worker 12 thread done. RX=4966581 TX=4966581 + worker 13 thread done. RX=4963329 TX=4963329 + worker 14 thread done. RX=4953614 TX=4953614 + worker 0 thread done. RX=0 TX=0 + worker 11 thread done. RX=4970549 TX=4970549 + worker 10 thread done. RX=4986391 TX=4986391 + worker 9 thread done. RX=4970528 TX=4970528 + worker 15 thread done. RX=4974087 TX=4974087 + worker 8 thread done. RX=4979908 TX=4979908 + worker 2 thread done. RX=0 TX=0 + + Port Workload distribution: + worker 0 : 12.5 % (4979876 pkts) + worker 1 : 12.5 % (4970497 pkts) + worker 2 : 12.5 % (4986359 pkts) + worker 3 : 12.5 % (4970517 pkts) + worker 4 : 12.5 % (4966566 pkts) + worker 5 : 12.5 % (4963297 pkts) + worker 6 : 12.5 % (4953598 pkts) + worker 7 : 12.5 % (4974055 pkts) + +To get a full dump of the state of the eventdev PMD, pass the ``-D`` flag to +this application. When the app is terminated using ``Ctrl+C``, the +``rte_event_dev_dump()`` function is called, resulting in a dump of the +statistics that the PMD provides. The statistics provided depend on the PMD +used, see the Event Device Drivers section for a list of eventdev PMDs. diff --git a/doc/guides/sample_app_ug/index.rst b/doc/guides/sample_app_ug/index.rst index 02611ef850..f9239e3db2 100644 --- a/doc/guides/sample_app_ug/index.rst +++ b/doc/guides/sample_app_ug/index.rst @@ -69,6 +69,7 @@ Sample Applications User Guides netmap_compatibility ip_pipeline test_pipeline + eventdev_pipeline_sw_pmd dist_app vm_power_management tep_termination