From: Xiao Wang Date: Sun, 25 Sep 2016 08:59:39 +0000 (+0800) Subject: net/ixgbe/base: remove X550em SFP iXFI setup X-Git-Tag: spdx-start~5805 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=1726b9cd9c40;p=dpdk.git net/ixgbe/base: remove X550em SFP iXFI setup This patch removes X550em SFP iXFI setup for the drivers since there is no released hardware production with SFP iXFI. Signed-off-by: Xiao Wang Acked-by: Wenzhuo Lu --- diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c index aa6e859f84..b8fdb00819 100644 --- a/drivers/net/ixgbe/base/ixgbe_x550.c +++ b/drivers/net/ixgbe/base/ixgbe_x550.c @@ -2460,53 +2460,18 @@ s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, if (ret_val != IXGBE_SUCCESS) return ret_val; - if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { - /* Configure CS4227 LINE side to 10G SR. */ - reg_slice = IXGBE_CS4227_LINE_SPARE22_MSB + - (hw->bus.lan_id << 12); - reg_val = IXGBE_CS4227_SPEED_10G; - ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, - reg_val); - - reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + - (hw->bus.lan_id << 12); + /* Configure internal PHY for KR/KX. */ + ixgbe_setup_kr_speed_x550em(hw, speed); + + /* Configure CS4227 LINE side to proper mode. */ + reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + + (hw->bus.lan_id << 12); + if (setup_linear) + reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; + else reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; - ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, - reg_val); - - /* Configure CS4227 for HOST connection rate then type. */ - reg_slice = IXGBE_CS4227_HOST_SPARE22_MSB + - (hw->bus.lan_id << 12); - reg_val = (speed & IXGBE_LINK_SPEED_10GB_FULL) ? - IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G; - ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, - reg_val); - - reg_slice = IXGBE_CS4227_HOST_SPARE24_LSB + - (hw->bus.lan_id << 12); - if (setup_linear) - reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; - else - reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; - ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, - reg_val); - - /* Setup XFI internal link. */ - ret_val = ixgbe_setup_ixfi_x550em(hw, &speed); - } else { - /* Configure internal PHY for KR/KX. */ - ixgbe_setup_kr_speed_x550em(hw, speed); - - /* Configure CS4227 LINE side to proper mode. */ - reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + - (hw->bus.lan_id << 12); - if (setup_linear) - reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; - else - reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; - ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, - reg_val); - } + ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, + reg_val); return ret_val; }