From: Dekel Peled Date: Mon, 22 Jul 2019 14:52:03 +0000 (+0000) Subject: net/mlx5: check conditions to enable LRO X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=175f1c21d0334e96d959fbe88a614a4bcc1b1e99;p=dpdk.git net/mlx5: check conditions to enable LRO Use DevX API to read device LRO capabilities. Check if LRO is supported and can be enabled. Check if MPRQ is supported and can be used. Enable MPRQ for LRO use if not enabled by user. Added note for mlx5_mprq_enabled(), to emphasize that LRO enables MPRQ. Disable CQE compression and CRC stripping if LRO is enabled. Signed-off-by: Dekel Peled Acked-by: Matan Azrad Acked-by: Viacheslav Ovsiienko --- diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst index 1ea2c43445..ecd25dc41a 100644 --- a/doc/guides/nics/mlx5.rst +++ b/doc/guides/nics/mlx5.rst @@ -163,6 +163,10 @@ Limitations - ICMP/ICMP6 code/type matching cannot be supported togeter with IP-in-IP tunnel. +- LRO: + + - ``scatter_fcs`` is disabled when LRO is configured. + Statistics ---------- diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c index 19e1f419ac..fca2dbf3de 100644 --- a/drivers/net/mlx5/mlx5.c +++ b/drivers/net/mlx5/mlx5.c @@ -1683,6 +1683,38 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev, } else if (config.cqe_pad) { DRV_LOG(INFO, "Rx CQE padding is enabled"); } + if (config.devx) { + priv->counter_fallback = 0; + err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config.hca_attr); + if (err) { + err = -err; + goto error; + } + if (!config.hca_attr.flow_counters_dump) + priv->counter_fallback = 1; +#ifndef HAVE_IBV_DEVX_ASYNC + priv->counter_fallback = 1; +#endif + if (priv->counter_fallback) + DRV_LOG(INFO, "Use fall-back DV counter management\n"); + /* Check for LRO support. */ + if (config.dest_tir && mprq && config.hca_attr.lro_cap) { + /* TBD check tunnel lro caps. */ + config.lro.supported = config.hca_attr.lro_cap; + DRV_LOG(DEBUG, "Device supports LRO"); + /* + * If LRO timeout is not configured by application, + * use the minimal supported value. + */ + if (!config.lro.timeout) + config.lro.timeout = + config.hca_attr.lro_timer_supported_periods[0]; + DRV_LOG(DEBUG, "LRO session timeout set to %d usec", + config.lro.timeout); + config.mprq.enabled = 1; + DRV_LOG(DEBUG, "Enable MPRQ for LRO use"); + } + } if (config.mprq.enabled && mprq) { if (config.mprq.stride_num_n > mprq_max_stride_num_n || config.mprq.stride_num_n < mprq_min_stride_num_n) { @@ -1790,23 +1822,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev, * Verbs context returned by ibv_open_device(). */ mlx5_link_update(eth_dev, 0); -#ifdef HAVE_IBV_DEVX_OBJ - if (config.devx) { - priv->counter_fallback = 0; - err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config.hca_attr); - if (err) { - err = -err; - goto error; - } - if (!config.hca_attr.flow_counters_dump) - priv->counter_fallback = 1; -#ifndef HAVE_IBV_DEVX_ASYNC - priv->counter_fallback = 1; -#endif - if (priv->counter_fallback) - DRV_LOG(INFO, "Use fall-back DV counter management\n"); - } -#endif #ifdef HAVE_MLX5DV_DR_ESWITCH if (!(config.hca_attr.eswitch_manager && config.dv_flow_en && (switch_info->representor || switch_info->master))) diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c index cf50e6e84a..e627909abe 100644 --- a/drivers/net/mlx5/mlx5_ethdev.c +++ b/drivers/net/mlx5/mlx5_ethdev.c @@ -389,6 +389,7 @@ mlx5_dev_configure(struct rte_eth_dev *dev) const uint8_t use_app_rss_key = !!dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key; int ret = 0; + unsigned int lro_on = mlx5_lro_on(dev); if (use_app_rss_key && (dev->data->dev_conf.rx_adv_conf.rss_conf.rss_key_len != @@ -431,6 +432,12 @@ mlx5_dev_configure(struct rte_eth_dev *dev) DRV_LOG(INFO, "port %u Rx queues number update: %u -> %u", dev->data->port_id, priv->rxqs_n, rxqs_n); priv->rxqs_n = rxqs_n; + /* + * WHen using LRO, MPRQ is implicitly enabled. + * Adjust threshold value to ensure MPRQ can be enabled. + */ + if (lro_on && priv->config.mprq.min_rxqs_num > priv->rxqs_n) + priv->config.mprq.min_rxqs_num = priv->rxqs_n; /* * If the requested number of RX queues is not a power of two, * use the maximum indirection table size for better balancing. @@ -453,6 +460,11 @@ mlx5_dev_configure(struct rte_eth_dev *dev) j = 0; } } + if (lro_on && priv->config.cqe_comp) { + /* CQE compressing is not supported for LRO CQEs. */ + DRV_LOG(WARNING, "Rx CQE compression isn't supported with LRO"); + priv->config.cqe_comp = 0; + } ret = mlx5_proc_priv_init(dev); if (ret) return ret; diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c index e68de50156..8567ee5606 100644 --- a/drivers/net/mlx5/mlx5_rxq.c +++ b/drivers/net/mlx5/mlx5_rxq.c @@ -93,6 +93,7 @@ mlx5_rxq_mprq_enabled(struct mlx5_rxq_data *rxq) /** * Check whether Multi-Packet RQ is enabled for the device. + * MPRQ can be enabled explicitly, or implicitly by enabling LRO. * * @param dev * Pointer to Ethernet device. @@ -1431,7 +1432,18 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc, tmpl->rxq.crc_present = 0; if (offloads & DEV_RX_OFFLOAD_KEEP_CRC) { if (config->hw_fcs_strip) { - tmpl->rxq.crc_present = 1; + /* + * RQs used for LRO-enabled TIRs should not be + * configured to scatter the FCS. + */ + if (mlx5_lro_on(dev)) + DRV_LOG(WARNING, + "port %u CRC stripping has been " + "disabled but will still be performed " + "by hardware, because LRO is enabled", + dev->data->port_id); + else + tmpl->rxq.crc_present = 1; } else { DRV_LOG(WARNING, "port %u CRC stripping has been disabled but will"