From: John Daley Date: Sun, 13 Dec 2015 23:11:32 +0000 (-0800) Subject: enic: add guide X-Git-Tag: spdx-start~7747 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=211f9a9ce2f0569431826df7394d634355876550;p=dpdk.git enic: add guide Signed-off-by: John Daley --- diff --git a/doc/guides/nics/enic.rst b/doc/guides/nics/enic.rst new file mode 100644 index 0000000000..2a228fd9db --- /dev/null +++ b/doc/guides/nics/enic.rst @@ -0,0 +1,221 @@ +.. BSD LICENSE + Copyright (c) 2015, Cisco Systems, Inc. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + 1. Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +ENIC Poll Mode Driver +===================== + +ENIC PMD is the DPDK poll-mode driver for the Cisco System Inc. VIC Ethernet +NICs. These adapters are also referred to as vNICs below. If you are running +or would like to run DPDK software applications on Cisco UCS servers using +Cisco VIC adapters the following documentation is relevant. + +Version Information +------------------- + +The version of the ENIC PMD driver is 1.0.0.6 and will be printed by ENIC PMD +during the initialization. + +How to obtain ENIC PMD integrated DPDK +-------------------------------------- + +ENIC PMD support is integrated into the DPDK suite. dpdk-.tar.gz +should be downloaded from http://dpdk.org + + +Configuration information +------------------------- + +- **DPDK Configuration Parameters** + + The following configuration options are available for the ENIC PMD: + + - **CONFIG_RTE_LIBRTE_ENIC_PMD** (default y): Enables or disables inclusion + of the ENIC PMD driver in the DPDK compilation. + + - **CONFIG_RTE_LIBRTE_ENIC_DEBUG** (default n): Enables or disables debug + logging within the ENIC PMD driver. + +- **vNIC Configuration Parameters** + + - **Number of Queues** + + The maximum number of receive and transmit queues are configurable on a per + vNIC basis through the Cisco UCS Manager (CIMC or UCSM). These values + should be configured to be greater than or equal to the nb_rx_q and nb_tx_q + parameters expected to used in the call to the rte_eth_dev_configure() + function. + + - **Size of Queues** + + Likewise, the number of receive and transmit descriptors are configurable on + a per vNIC bases via the UCS Manager and should be greater than or equal to + the nb_rx_desc and nb_tx_desc parameters expected to be used in the calls + to rte_eth_rx_queue_setup() and rte_eth_tx_queue_setup() respectively. + + - **Interrupts** + + Only one interrupt per vNIC interface should be configured in the UCS + manager regardless of the number receive/transmit queues. The ENIC PMD + uses this interrupt to get information about errors in the fast path. + +Limitations +----------- + +- **VLAN 0 Priority Tagging** + + If a vNIC is configured in TRUNK mode by the UCS manager, the adapter will + priority tag egress packets according to 802.1Q if they were not already + VLAN tagged by software. If the adapter is connected to a properly configured + switch, there will be no unexpected behavior. + + In test setups where an Ethernet port of a Cisco adapter in TRUNK mode is + connected point-to-point to another adapter port or connected though a router + instead of a switch, all ingress packets will be VLAN tagged. Programs such + as l3fwd which do not account for VLAN tags in packets will misbehave. The + solution is to enable VLAN stripping on ingress. The follow code fragment is + example of how to accomplish this: + +.. code-block:: console + + vlan_offload = rte_eth_dev_get_vlan_offload(port); + vlan_offload |= ETH_VLAN_STRIP_OFFLOAD; + rte_eth_dev_set_vlan_offload(port, vlan_offload); + +How to build the suite? +----------------------- +The build instructions for the DPDK suite should be followed. By default +the ENIC PMD library will be built into the DPDK library. + +For configuring and using UIO and VFIO frameworks, please refer the +documentation that comes with DPDK suite. + +Supported Cisco VIC adapters +---------------------------- + +ENIC PMD supports all recent generations of Cisco VIC adapters including: + +- VIC 1280 +- VIC 1240 +- VIC 1225 +- VIC 1285 +- VIC 1225T +- VIC 1227 +- VIC 1227T +- VIC 1380 +- VIC 1340 +- VIC 1385 +- VIC 1387 + +- Flow director features are not supported on generation 1 Cisco VIC adapters + (M81KR and P81E) + +Supported Operating Systems +--------------------------- +Any Linux distribution fulfilling the conditions described in Dependencies +section of DPDK documentation. + +Supported features +------------------ +- Unicast, multicast and broadcast transmission and reception +- Receive queue polling +- Port Hardware Statistics +- Hardware VLAN acceleration +- IP checksum offload +- Receive side VLAN stripping +- Multiple receive and transmit queues +- Flow Director ADD, UPDATE, DELETE, STATS operation support for IPV4 5-TUPLE + flows +- Promiscuous mode +- Setting RX VLAN (supported via UCSM/CIMC only) +- VLAN filtering (supported via UCSM/CIMC only) +- Execution of application by unprivileged system users +- IPV4, IPV6 and TCP RSS hashing + +Known bugs and Unsupported features in this release +--------------------------------------------------- +- Signature or flex byte based flow direction +- Drop feature of flow direction +- VLAN based flow direction +- non-IPV4 flow direction +- Setting of extended VLAN +- UDP RSS hashing + +Prerequisites +------------- +- Prepare the system as recommended by DPDK suite. This includes environment + variables, hugepages configuration, tool-chains and configuration +- Insert vfio-pci kernel module using the command 'modprobe vfio-pci' if the + user wants to use VFIO framework +- Insert uio kernel module using the command 'modprobe uio' if the user wants + to use UIO framework +- DPDK suite should be configured based on the user's decision to use VFIO or + UIO framework +- If the vNIC device(s) to be used is bound to the kernel mode Ethernet driver + (enic), use 'ifconfig' to bring the interface down. The dpdk_nic_bind.py tool + can then be used to unbind the device's bus id from the enic kernel mode + driver. +- Bind the intended vNIC to vfio-pci in case the user wants ENIC PMD to use + VFIO framework using dpdk_nic_bind.py. +- Bind the intended vNIC to igb_uio in case the user wants ENIC PMD to use + UIO framework using dpdk_nic_bind.py. + +At this point the system should be ready to run DPDK applications. Once the +application runs to completion, the vNIC can be detached from vfio-pci or +igb_uio if necessary. + +Root privilege is required to bind and unbind vNICs to/from VFIO/UIO. +VFIO framework helps an unprivileged user to run the applications. +For an unprivileged user to run the applications on DPDK and ENIC PMD, +it may be necessary to increase the maximum locked memory of the user. +The following command could be used to do this. + +.. code-block:: console + + sudo sh -c "ulimit -l " + +The value depends on the memory configuration of the application, DPDK and +PMD. Typically, the limit has to be raised to higher than 2GB. +e.g., 2621440 + +The compilation of any unused drivers can be disabled using the +configuration file in config/ directory (e.g., config/common_linuxapp). +This would help in bringing down the time taken for building the +libraries and the initialization time of the application. + +Additional Reference +-------------------- +- http://www.cisco.com/c/en/us/products/servers-unified-computing + +Contact Information +------------------- +Any questions or bugs should be reported to DPDK community and to the ENIC PMD +maintainers: + +- John Daley +- Sujith Sankar diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst index 3e0456dd4a..2f7506cdf6 100644 --- a/doc/guides/nics/index.rst +++ b/doc/guides/nics/index.rst @@ -43,6 +43,7 @@ Network Interface Controller Drivers bnx2x cxgbe e1000em + enic fm10k ixgbe intel_vf