From: Shahed Shaikh <shahed.shaikh@cavium.com>
Date: Sat, 23 Jun 2018 21:20:32 +0000 (-0700)
Subject: net/qede: fix legacy interrupt mode
X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=245aec2893380e442169c8a1914c36daa444efd3;p=dpdk.git

net/qede: fix legacy interrupt mode

qede pmd does not have support for legacy interrupt mode.
This causes slow path completion failure with uio_pci_generic module,
since it uses legacy interrupt (INTx) mode.

Fix this issue by installing legacy interrupt handler.

Fixes: ec94dbc57362 ("qede: add base driver")
Cc: stable@dpdk.org

Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
---

diff --git a/drivers/net/qede/qede_ethdev.c b/drivers/net/qede/qede_ethdev.c
index 1cae474243..8bbfa95e38 100644
--- a/drivers/net/qede/qede_ethdev.c
+++ b/drivers/net/qede/qede_ethdev.c
@@ -338,6 +338,24 @@ static void qede_interrupt_action(struct ecore_hwfn *p_hwfn)
 	ecore_int_sp_dpc((osal_int_ptr_t)(p_hwfn));
 }
 
+static void
+qede_interrupt_handler_intx(void *param)
+{
+	struct rte_eth_dev *eth_dev = (struct rte_eth_dev *)param;
+	struct qede_dev *qdev = eth_dev->data->dev_private;
+	struct ecore_dev *edev = &qdev->edev;
+	u64 status;
+
+	/* Check if our device actually raised an interrupt */
+	status = ecore_int_igu_read_sisr_reg(ECORE_LEADING_HWFN(edev));
+	if (status & 0x1) {
+		qede_interrupt_action(ECORE_LEADING_HWFN(edev));
+
+		if (rte_intr_enable(eth_dev->intr_handle))
+			DP_ERR(edev, "rte_intr_enable failed\n");
+	}
+}
+
 static void
 qede_interrupt_handler(void *param)
 {
@@ -3063,6 +3081,7 @@ static int qede_common_dev_init(struct rte_eth_dev *eth_dev, bool is_vf)
 	/* Fix up ecore debug level */
 	uint32_t dp_module = ~0 & ~ECORE_MSG_HW;
 	uint8_t dp_level = ECORE_LEVEL_VERBOSE;
+	uint32_t int_mode;
 	int rc;
 
 	/* Extract key data structures */
@@ -3107,8 +3126,22 @@ static int qede_common_dev_init(struct rte_eth_dev *eth_dev, bool is_vf)
 		return -ENODEV;
 	}
 	qede_update_pf_params(edev);
-	rte_intr_callback_register(&pci_dev->intr_handle,
-				   qede_interrupt_handler, (void *)eth_dev);
+
+	switch (pci_dev->intr_handle.type) {
+	case RTE_INTR_HANDLE_UIO_INTX:
+	case RTE_INTR_HANDLE_VFIO_LEGACY:
+		int_mode = ECORE_INT_MODE_INTA;
+		rte_intr_callback_register(&pci_dev->intr_handle,
+					   qede_interrupt_handler_intx,
+					   (void *)eth_dev);
+		break;
+	default:
+		int_mode = ECORE_INT_MODE_MSIX;
+		rte_intr_callback_register(&pci_dev->intr_handle,
+					   qede_interrupt_handler,
+					   (void *)eth_dev);
+	}
+
 	if (rte_intr_enable(&pci_dev->intr_handle)) {
 		DP_ERR(edev, "rte_intr_enable() failed\n");
 		return -ENODEV;
@@ -3116,7 +3149,8 @@ static int qede_common_dev_init(struct rte_eth_dev *eth_dev, bool is_vf)
 
 	/* Start the Slowpath-process */
 	memset(&params, 0, sizeof(struct qed_slowpath_params));
-	params.int_mode = ECORE_INT_MODE_MSIX;
+
+	params.int_mode = int_mode;
 	params.drv_major = QEDE_PMD_VERSION_MAJOR;
 	params.drv_minor = QEDE_PMD_VERSION_MINOR;
 	params.drv_rev = QEDE_PMD_VERSION_REVISION;
diff --git a/drivers/net/qede/qede_main.c b/drivers/net/qede/qede_main.c
index de5a7ca807..2885e5d45e 100644
--- a/drivers/net/qede/qede_main.c
+++ b/drivers/net/qede/qede_main.c
@@ -281,7 +281,7 @@ static int qed_slowpath_start(struct ecore_dev *edev,
 	/* Start the slowpath */
 	memset(&hw_init_params, 0, sizeof(hw_init_params));
 	hw_init_params.b_hw_start = true;
-	hw_init_params.int_mode = ECORE_INT_MODE_MSIX;
+	hw_init_params.int_mode = params->int_mode;
 	hw_init_params.allow_npar_tx_switch = true;
 	hw_init_params.bin_fw_data = data;