From: Thomas Monjalon Date: Tue, 1 Dec 2015 07:36:00 +0000 (+0100) Subject: mk: remove multi-target install X-Git-Tag: spdx-start~7900 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=27f356c48da352287c4fab72a48d889a77b88db4;p=dpdk.git mk: remove multi-target install The multi-target install create some subdirectories with the target name which is not standard for a "make install" procedure. The uninstall procedure cannot be applied properly (without removing all files in a directory). It would need to pre-compute paths. As it is a packaging issue, it is removed from the build system capabilities. The variable BUILD_DIR is also renamed to RTE_OUTPUT used in other files. Signed-off-by: Thomas Monjalon Acked-by: Panu Matilainen --- diff --git a/doc/build-sdk-quick.txt b/doc/build-sdk-quick.txt index bf18b48119..b5f752ea05 100644 --- a/doc/build-sdk-quick.txt +++ b/doc/build-sdk-quick.txt @@ -5,8 +5,7 @@ Build commands all same as build (default rule) build build in a configured directory clean remove files but keep configuration - install build many targets (wildcard allowed) and install in DESTDIR - uninstall remove all installed targets + install configure, build and install a target in DESTDIR examples build examples for given targets (T=) examples_clean clean examples for given targets (T=) Build variables @@ -20,6 +19,6 @@ Build variables D debug dependencies O build directory (default: build/ - install default: ./) DESTDIR second-stage install directory - T target template (install default: *) - used with config or install + T target template - used with config or install format: templates in config/defconfig_* diff --git a/doc/guides/linux_gsg/build_dpdk.rst b/doc/guides/linux_gsg/build_dpdk.rst index 2680e66c16..fd0fcc8d8c 100644 --- a/doc/guides/linux_gsg/build_dpdk.rst +++ b/doc/guides/linux_gsg/build_dpdk.rst @@ -110,22 +110,6 @@ To compile a 32-bit build using gcc, the make command should be: make install T=i686-native-linuxapp-gcc -To compile all 64-bit targets using gcc, use: - -.. code-block:: console - - make install T=x86_64*gcc - -To compile all 64-bit targets using both gcc and icc, use: - -.. code-block:: console - - make install T=x86_64-* - -.. note:: - - The wildcard operator (*) can be used to create multiple targets at the same time. - To prepare a target without building it, for example, if the configuration changes need to be made before compilation, use the make config T= command: diff --git a/doc/guides/prog_guide/dev_kit_root_make_help.rst b/doc/guides/prog_guide/dev_kit_root_make_help.rst index eb7da02ca7..6910b74ca5 100644 --- a/doc/guides/prog_guide/dev_kit_root_make_help.rst +++ b/doc/guides/prog_guide/dev_kit_root_make_help.rst @@ -108,21 +108,14 @@ Install Targets * Install Build the DPDK binary. - Actually, this builds each supported target in a separate directory. - The name of each directory is the name of the target. - The name of the targets to install can be optionally specified using T=mytarget. - The target name can contain wildcard \* characters. + The name of the target to install is specified using T=mytarget. The list of available targets are in $(RTE_SDK)/config (remove the defconfig\_ prefix). Example: .. code-block:: console - make install T=x86_64-* - -* Uninstall - - Remove installed target directories. + make install T=x86_64-native-linuxapp-gcc Test Targets ------------ diff --git a/mk/rte.sdkinstall.mk b/mk/rte.sdkinstall.mk index 86c98a52dd..0b80104517 100644 --- a/mk/rte.sdkinstall.mk +++ b/mk/rte.sdkinstall.mk @@ -29,59 +29,29 @@ # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# Build directory is given with O= -ifdef O -BUILD_DIR=$(O) -else -BUILD_DIR=. -endif +# Configuration, compilation and installation can be done at once +# with make install T= -# Targets to install can be specified in command line. It can be a -# target name or a name containing jokers "*". Example: -# x86_64-native-*-gcc -ifndef T -T=* -endif - -# -# install: build sdk for all supported targets -# -INSTALL_CONFIGS := $(patsubst $(RTE_SRCDIR)/config/defconfig_%,%,\ - $(wildcard $(RTE_SRCDIR)/config/defconfig_$(T))) -INSTALL_TARGETS := $(addsuffix _install,\ - $(filter-out %~,$(INSTALL_CONFIGS))) +# The build directory is T and may be prepended with O +O ?= . +RTE_OUTPUT := $O/$T .PHONY: install -install: $(INSTALL_TARGETS) - -%_install: - @echo ================== Installing $* - $(Q)if [ ! -f $(BUILD_DIR)/$*/.config ]; then \ - $(MAKE) config T=$* O=$(BUILD_DIR)/$*; \ - elif cmp -s $(BUILD_DIR)/$*/.config.orig $(BUILD_DIR)/$*/.config; then \ - $(MAKE) config T=$* O=$(BUILD_DIR)/$*; \ +install: + @echo ================== Installing $T + $(Q)if [ ! -f $(RTE_OUTPUT)/.config ]; then \ + $(MAKE) config O=$(RTE_OUTPUT); \ + elif cmp -s $(RTE_OUTPUT)/.config.orig $(RTE_OUTPUT)/.config; then \ + $(MAKE) config O=$(RTE_OUTPUT); \ else \ - if [ -f $(BUILD_DIR)/$*/.config.orig ] ; then \ - tmp_build=$(BUILD_DIR)/$*/.config.tmp; \ - $(MAKE) config T=$* O=$$tmp_build; \ - if ! cmp -s $(BUILD_DIR)/$*/.config.orig $$tmp_build/.config ; then \ + if [ -f $(RTE_OUTPUT)/.config.orig ] ; then \ + tmp_build=$(RTE_OUTPUT)/.config.tmp; \ + $(MAKE) config O=$$tmp_build; \ + if ! cmp -s $(RTE_OUTPUT)/.config.orig $$tmp_build/.config ; then \ echo "Conflict: local config and template config have both changed"; \ exit 1; \ fi; \ fi; \ echo "Using local configuration"; \ fi - $(Q)$(MAKE) all O=$(BUILD_DIR)/$* - -# -# uninstall: remove all built sdk -# -UNINSTALL_TARGETS := $(addsuffix _uninstall,\ - $(filter-out %~,$(INSTALL_CONFIGS))) - -.PHONY: uninstall -uninstall: $(UNINSTALL_TARGETS) - -%_uninstall: - @echo ================== Uninstalling $* - $(Q)rm -rf $(BUILD_DIR)/$* + $(Q)$(MAKE) all O=$(RTE_OUTPUT) diff --git a/mk/rte.sdkroot.mk b/mk/rte.sdkroot.mk index 0e97308cd2..9fdecf4ebd 100644 --- a/mk/rte.sdkroot.mk +++ b/mk/rte.sdkroot.mk @@ -93,8 +93,8 @@ config showconfigs showversion: test fast_test ring_test mempool_test perf_test coverage: $(Q)$(MAKE) -f $(RTE_SDK)/mk/rte.sdktest.mk $@ -.PHONY: install uninstall -install uninstall: +.PHONY: install +install: $(Q)$(MAKE) -f $(RTE_SDK)/mk/rte.sdkinstall.mk $@ .PHONY: doc help diff --git a/tools/setup.sh b/tools/setup.sh index fbd385384c..faa5eeee18 100755 --- a/tools/setup.sh +++ b/tools/setup.sh @@ -110,14 +110,6 @@ setup_target() echo "------------------------------------------------------------------------------" } -# -# Uninstall all targets. -# -uninstall_targets() -{ - make uninstall -} - # # Creates hugepage filesystem. # @@ -577,23 +569,20 @@ step5_func() { TITLE="Uninstall and system cleanup" - TEXT[1]="Uninstall all targets" - FUNC[1]="uninstall_targets" - - TEXT[2]="Unbind NICs from IGB UIO or VFIO driver" - FUNC[2]="unbind_nics" + TEXT[1]="Unbind NICs from IGB UIO or VFIO driver" + FUNC[1]="unbind_nics" - TEXT[3]="Remove IGB UIO module" - FUNC[3]="remove_igb_uio_module" + TEXT[2]="Remove IGB UIO module" + FUNC[2]="remove_igb_uio_module" - TEXT[4]="Remove VFIO module" - FUNC[4]="remove_vfio_module" + TEXT[3]="Remove VFIO module" + FUNC[3]="remove_vfio_module" - TEXT[5]="Remove KNI module" - FUNC[5]="remove_kni_module" + TEXT[4]="Remove KNI module" + FUNC[4]="remove_kni_module" - TEXT[6]="Remove hugepage mappings" - FUNC[6]="clear_huge_pages" + TEXT[5]="Remove hugepage mappings" + FUNC[5]="clear_huge_pages" } STEPS[1]="step1_func"