From: Bruce Richardson Date: Wed, 3 Jun 2015 13:58:13 +0000 (+0100) Subject: doc: add coding style X-Git-Tag: spdx-start~9133 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=36032e46be40d97aa3ea4229c6f829dcceedbfca;p=dpdk.git doc: add coding style Add coding standards document to guides directory. This document codifies the current DPDK C coding conventions, to make it easier for contributors to see the format their code should be in. Signed-off-by: Siobhan Butler Signed-off-by: Bruce Richardson Acked-by: John McNamara Acked-by: Thomas Monjalon --- diff --git a/doc/guides/guidelines/coding_style.rst b/doc/guides/guidelines/coding_style.rst new file mode 100644 index 0000000000..27ea53c10d --- /dev/null +++ b/doc/guides/guidelines/coding_style.rst @@ -0,0 +1,861 @@ +Coding Style +============= + +Description +----------- + +This document specifies the preferred style for source files in the DPDK source tree. +It is based on the Linux Kernel coding guidelines and the FreeBSD 7.2 Kernel Developer's Manual (see man style(9)), but was heavily modified for the needs of the DPDK. + +General Guidelines +------------------ + +The rules and guidelines given in this document cannot cover every situation, so the following general guidelines should be used as a fallback: + +* The code style should be consistent within each individual file. +* In the case of creating new files, the style should be consistent within each file in a given directory or module. +* The primary reason for coding standards is to increase code readability and comprehensibility, therefore always use whatever option will make the code easiest to read. + +Line length is recommended to be not more than 80 characters, including comments. +[Tab stop size should be assumed to be 8-characters wide]. + +.. note:: + + The above is recommendation, and not a hard limit. + However, it is expected that the recommendations should be followed in all but the rarest situations. + +C Comment Style +--------------- + +Usual Comments +~~~~~~~~~~~~~~ + +These comments should be used in normal cases. +To document a public API, a doxygen-like format must be used: refer to Doxygen Documentation. + +.. code-block:: c + + /* + * VERY important single-line comments look like this. + */ + + /* Most single-line comments look like this. */ + + /* + * Multi-line comments look like this. Make them real sentences. Fill + * them so they look like real paragraphs. + */ + +License Header +~~~~~~~~~~~~~~ + +Each file should begin with a special comment containing the appropriate copyright and license for the file. +Generally this is the BSD License, except for code for Linux Kernel modules. +After any copyright header, a blank line should be left before any other contents, e.g. include statements in a C file. + +C Preprocessor Directives +------------------------- + +Header Includes +~~~~~~~~~~~~~~~ + +In DPDK sources, the include files should be ordered as following: + +#. libc includes (system includes first) +#. DPDK EAL includes +#. DPDK misc libraries includes +#. application-specific includes + +Include files from the local application directory are included using quotes, while includes from other paths are included using angle brackets: "<>". + +Example: + +.. code-block:: c + + #include + #include + + #include + + #include + #include + + #include "application.h" + +Header File Guards +~~~~~~~~~~~~~~~~~~ + +Headers should be protected against multiple inclusion with the usual: + +.. code-block:: c + + #ifndef _FILE_H_ + #define _FILE_H_ + + /* Code */ + + #endif /* _FILE_H_ */ + + +Macros +~~~~~~ + +Do not ``#define`` or declare names except with the standard DPDK prefix: ``RTE_``. +This is to ensure there are no collisions with definitions in the application itself. + +The names of "unsafe" macros (ones that have side effects), and the names of macros for manifest constants, are all in uppercase. + +The expansions of expression-like macros are either a single token or have outer parentheses. +If a macro is an inline expansion of a function, the function name is all in lowercase and the macro has the same name all in uppercase. +If the macro encapsulates a compound statement, enclose it in a do-while loop, so that it can be used safely in if statements. +Any final statement-terminating semicolon should be supplied by the macro invocation rather than the macro, to make parsing easier for pretty-printers and editors. + +For example: + +.. code-block:: c + + #define MACRO(x, y) do { \ + variable = (x) + (y); \ + (y) += 2; \ + } while(0) + +.. note:: + + Wherever possible, enums and inline functions should be preferred to macros, since they provide additional degrees of type-safety and can allow compilers to emit extra warnings about unsafe code. + +Conditional Compilation +~~~~~~~~~~~~~~~~~~~~~~~ + +* When code is conditionally compiled using ``#ifdef`` or ``#if``, a comment may be added following the matching + ``#endif`` or ``#else`` to permit the reader to easily discern where conditionally compiled code regions end. +* This comment should be used only for (subjectively) long regions, regions greater than 20 lines, or where a series of nested ``#ifdef``'s may be confusing to the reader. + Exceptions may be made for cases where code is conditionally not compiled for the purposes of lint(1), or other tools, even though the uncompiled region may be small. +* The comment should be separated from the ``#endif`` or ``#else`` by a single space. +* For short conditionally compiled regions, a closing comment should not be used. +* The comment for ``#endif`` should match the expression used in the corresponding ``#if`` or ``#ifdef``. +* The comment for ``#else`` and ``#elif`` should match the inverse of the expression(s) used in the preceding ``#if`` and/or ``#elif`` statements. +* In the comments, the subexpression ``defined(FOO)`` is abbreviated as "FOO". + For the purposes of comments, ``#ifndef FOO`` is treated as ``#if !defined(FOO)``. + +.. code-block:: c + + #ifdef KTRACE + #include + #endif + + #ifdef COMPAT_43 + /* A large region here, or other conditional code. */ + #else /* !COMPAT_43 */ + /* Or here. */ + #endif /* COMPAT_43 */ + + #ifndef COMPAT_43 + /* Yet another large region here, or other conditional code. */ + #else /* COMPAT_43 */ + /* Or here. */ + #endif /* !COMPAT_43 */ + +.. note:: + + Conditional compilation should be used only when absolutely necessary, as it increases the number of target binaries that need to be built and tested. + +C Types +------- + +Integers +~~~~~~~~ + +For fixed/minimum-size integer values, the project uses the form uintXX_t (from stdint.h) instead of older BSD-style integer identifiers of the form u_intXX_t. + +Enumerations +~~~~~~~~~~~~ + +* Enumeration values are all uppercase. + +.. code-block:: c + + enum enumtype { ONE, TWO } et; + +* Enum types should be used in preference to macros #defining a set of (sequential) values. +* Enum types should be prefixed with ``rte_`` and the elements by a suitable prefix [generally starting ``RTE__`` - where is a shortname for the enum type] to avoid namespace collisions. + +Bitfields +~~~~~~~~~ + +The developer should group bitfields that are included in the same integer, as follows: + +.. code-block:: c + + struct grehdr { + uint16_t rec:3, + srr:1, + seq:1, + key:1, + routing:1, + csum:1, + version:3, + reserved:4, + ack:1; + /* ... */ + } + +Variable Declarations +~~~~~~~~~~~~~~~~~~~~~ + +In declarations, do not put any whitespace between asterisks and adjacent tokens, except for tokens that are identifiers related to types. +(These identifiers are the names of basic types, type qualifiers, and typedef-names other than the one being declared.) +Separate these identifiers from asterisks using a single space. + +For example: + +.. code-block:: c + + int *x; /* no space after asterisk */ + int * const x; /* space after asterisk when using a type qualifier */ + +* All externally-visible variables should have an ``rte_`` prefix in the name to avoid namespace collisions. +* Do not use uppercase letters - either in the form of ALL_UPPERCASE, or CamelCase - in variable names. + Lower-case letters and underscores only. + +Structure Declarations +~~~~~~~~~~~~~~~~~~~~~~ + +* In general, when declaring variables in new structures, declare them sorted by use, then by size (largest to smallest), and then in alphabetical order. + Sorting by use means that commonly used variables are used together and that the structure layout makes logical sense. + Ordering by size then ensures that as little padding is added to the structure as possible. +* For existing structures, additions to structures should be added to the end so for backward compatibility reasons. +* Each structure element gets its own line. +* Try to make the structure readable by aligning the member names using spaces as shown below. +* Names following extremely long types, which therefore cannot be easily aligned with the rest, should be separated by a single space. + +.. code-block:: c + + struct foo { + struct foo *next; /* List of active foo. */ + struct mumble amumble; /* Comment for mumble. */ + int bar; /* Try to align the comments. */ + struct verylongtypename *baz; /* Won't fit with other members */ + }; + + +* Major structures should be declared at the top of the file in which they are used, or in separate header files if they are used in multiple source files. +* Use of the structures should be by separate variable declarations and those declarations must be extern if they are declared in a header file. +* Externally visible structure definitions should have the structure name prefixed by ``rte_`` to avoid namespace collisions. + +Queues +~~~~~~ + +Use queue(3) macros rather than rolling your own lists, whenever possible. +Thus, the previous example would be better written: + +.. code-block:: c + + #include + + struct foo { + LIST_ENTRY(foo) link; /* Use queue macros for foo lists. */ + struct mumble amumble; /* Comment for mumble. */ + int bar; /* Try to align the comments. */ + struct verylongtypename *baz; /* Won't fit with other members */ + }; + LIST_HEAD(, foo) foohead; /* Head of global foo list. */ + + +DPDK also provides an optimized way to store elements in lockless rings. +This should be used in all data-path code, when there are several consumer and/or producers to avoid locking for concurrent access. + +Typedefs +~~~~~~~~ + +Avoid using typedefs for structure types. + +For example, use: + +.. code-block:: c + + struct my_struct_type { + /* ... */ + }; + + struct my_struct_type my_var; + + +rather than: + +.. code-block:: c + + typedef struct my_struct_type { + /* ... */ + } my_struct_type; + + my_struct_type my_var + + +Typedefs are problematic because they do not properly hide their underlying type; +for example, you need to know if the typedef is the structure itself, as shown above, or a pointer to the structure. +In addition, they must be declared exactly once, whereas an incomplete structure type can be mentioned as many times as necessary. +Typedefs are difficult to use in stand-alone header files. +The header that defines the typedef must be included before the header that uses it, or by the header that uses it (which causes namespace pollution), +or there must be a back-door mechanism for obtaining the typedef. + +Note that #defines used instead of typedefs also are problematic (since they do not propagate the pointer type correctly due to direct text replacement). +For example, ``#define pint int *`` does not work as expected, while ``typedef int *pint`` does work. +As stated when discussing macros, typedefs should be preferred to macros in cases like this. + +When convention requires a typedef; make its name match the struct tag. +Avoid typedefs ending in ``_t``, except as specified in Standard C or by POSIX. + +.. note:: + + It is recommended to use typedefs to define function pointer types, for reasons of code readability. + This is especially true when the function type is used as a parameter to another function. + +For example: + +.. code-block:: c + + /** + * Definition of a remote launch function. + */ + typedef int (lcore_function_t)(void *); + + /* launch a function of lcore_function_t type */ + int rte_eal_remote_launch(lcore_function_t *f, void *arg, unsigned slave_id); + + +C Indentation +------------- + +General +~~~~~~~ + +* Indentation is a hard tab, that is, a tab character, not a sequence of spaces, + +.. note:: + + Global whitespace rule in DPDK, use tabs for indentation, spaces for alignment. + +* Do not put any spaces before a tab for indentation. +* If you have to wrap a long statement, put the operator at the end of the line, and indent again. +* For control statements (if, while, etc.), continuation it is recommended that the next line be indented by two tabs, rather than one, + to prevent confusion as to whether the second line of the control statement forms part of the statement body or not. + Alternatively, the line continuation may use additional spaces to line up to an appropriately point on the preceding line, for example, to align to an opening brace. + +.. note:: + + As with all style guidelines, code should match style already in use in an existing file. + +.. code-block:: c + + while (really_long_variable_name_1 == really_long_variable_name_2 && + var3 == var4){ /* confusing to read as */ + x = y + z; /* control stmt body lines up with second line of */ + a = b + c; /* control statement itself if single indent used */ + } + + if (really_long_variable_name_1 == really_long_variable_name_2 && + var3 == var4){ /* two tabs used */ + x = y + z; /* statement body no longer lines up */ + a = b + c; + } + + z = a + really + long + statement + that + needs + + two + lines + gets + indented + on + the + + second + and + subsequent + lines; + + +* Do not add whitespace at the end of a line. + +* Do not add whitespace or a blank line at the end of a file. + + +Control Statements and Loops +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +* Include a space after keywords (if, while, for, return, switch). +* Do not use braces (``{`` and ``}``) for control statements with zero or just a single statement, unless that statement is more than a single line in which case the braces are permitted. + +.. code-block:: c + + for (p = buf; *p != '\0'; ++p) + ; /* nothing */ + for (;;) + stmt; + for (;;) { + z = a + really + long + statement + that + needs + + two + lines + gets + indented + on + the + + second + and + subsequent + lines; + } + for (;;) { + if (cond) + stmt; + } + if (val != NULL) + val = realloc(val, newsize); + + +* Parts of a for loop may be left empty. + +.. code-block:: c + + for (; cnt < 15; cnt++) { + stmt1; + stmt2; + } + +* Closing and opening braces go on the same line as the else keyword. +* Braces that are not necessary should be left out. + +.. code-block:: c + + if (test) + stmt; + else if (bar) { + stmt; + stmt; + } else + stmt; + + +Function Calls +~~~~~~~~~~~~~~ + +* Do not use spaces after function names. +* Commas should have a space after them. +* No spaces after ``(`` or ``[`` or preceding the ``]`` or ``)`` characters. + +.. code-block:: c + + error = function(a1, a2); + if (error != 0) + exit(error); + + +Operators +~~~~~~~~~ + +* Unary operators do not require spaces, binary operators do. +* Do not use parentheses unless they are required for precedence or unless the statement is confusing without them. + However, remember that other people may be more easily confused than you. + +Exit +~~~~ + +Exits should be 0 on success, or 1 on failure. + +.. code-block:: c + + exit(0); /* + * Avoid obvious comments such as + * "Exit 0 on success." + */ + } + +Local Variables +~~~~~~~~~~~~~~~ + +* Variables should be declared at the start of a block of code rather than in the middle. + The exception to this is when the variable is ``const`` in which case the declaration must be at the point of first use/assignment. +* When declaring variables in functions, multiple variables per line are OK. + However, if multiple declarations would cause the line to exceed a reasonable line length, begin a new set of declarations on the next line rather than using a line continuation. +* Be careful to not obfuscate the code by initializing variables in the declarations, only the last variable on a line should be initialized. + If multiple variables are to be initialised when defined, put one per line. +* Do not use function calls in initializers, except for ``const`` variables. + +.. code-block:: c + + int i = 0, j = 0, k = 0; /* bad, too many initializer */ + + char a = 0; /* OK, one variable per line with initializer */ + char b = 0; + + float x, y = 0.0; /* OK, only last variable has initializer */ + + +Casts and sizeof +~~~~~~~~~~~~~~~~ + +* Casts and sizeof statements are not followed by a space. +* Always write sizeof statements with parenthesis. + The redundant parenthesis rules do not apply to sizeof(var) instances. + +C Function Definition, Declaration and Use +------------------------------------------- + +Prototypes +~~~~~~~~~~ + +* It is recommended (and generally required by the compiler) that all non-static functions are prototyped somewhere. +* Functions local to one source module should be declared static, and should not be prototyped unless absolutely necessary. +* Functions used from other parts of code (external API) must be prototyped in the relevant include file. +* Function prototypes should be listed in a logical order, preferably alphabetical unless there is a compelling reason to use a different ordering. +* Functions that are used locally in more than one module go into a separate header file, for example, "extern.h". +* Do not use the ``__P`` macro. +* Functions that are part of an external API should be documented using Doxygen-like comments above declarations. See the Doxgen documentation topic for details. +* Functions that are part of the external API must have an ``rte_`` prefix on the function name. +* Do not use uppercase letters - either in the form of ALL_UPPERCASE, or CamelCase - in function names. Lower-case letters and underscores only. +* When prototyping functions, associate names with parameter types, for example: + +.. code-block:: c + + void function1(int fd); /* good */ + void function2(int); /* bad */ + +* Short function prototypes should be contained on a single line. + Longer prototypes, e.g. those with many parameters, can be split across multiple lines. + The second and subsequent lines should be further indented as for line statement continuations as described in the previous section. + +.. code-block:: c + + static char *function1(int _arg, const char *_arg2, + struct foo *_arg3, + struct bar *_arg4, + struct baz *_arg5); + static void usage(void); + +.. note:: + + Unlike function definitions, the function prototypes do not need to place the function return type on a separate line. + +Definitions +~~~~~~~~~~~ + +* The function type should be on a line by itself preceding the function. +* The opening brace of the function body should be on a line by itself. + +.. code-block:: c + + static char * + function(int a1, int a2, float fl, int a4) + { + + +* Do not declare functions inside other functions. + ANSI C states that such declarations have file scope regardless of the nesting of the declaration. + Hiding file declarations in what appears to be a local scope is undesirable and will elicit complaints from a good compiler. +* Old-style (K&R) function declaration should not be used, use ANSI function declarations instead as shown below. +* Long argument lists should be wrapped as described above in the function prototypes section. + +.. code-block:: c + + /* + * All major routines should have a comment briefly describing what + * they do. The comment before the "main" routine should describe + * what the program does. + */ + int + main(int argc, char *argv[]) + { + char *ep; + long num; + int ch; + +C Statement Style and Conventions +--------------------------------- + +NULL Pointers +~~~~~~~~~~~~~ + +* NULL is the preferred null pointer constant. + Use NULL instead of ``(type *)0`` or ``(type *)NULL``, except where the compiler does not know the destination type e.g. for variadic args to a function. +* Test pointers against NULL, for example, use: + +.. code-block:: c + + if (p == NULL) /* Good, compare pointer to NULL */ + + if (!p) /* Bad, using ! on pointer */ + + +* Do not use ! for tests unless it is a boolean, for example, use: + +.. code-block:: c + + if (*p == '\0') /* check character against (char)0 */ + +Return Value +~~~~~~~~~~~~ + +* Functions which create objects, or allocate memory, should return pointer types, and NULL on error. + The error type should be indicated may setting the variable ``rte_errno`` appropriately. +* Functions which work on bursts of packets, such as RX-like or TX-like functions, should return the number of packets handled. +* Other functions returning int should generally behave like system calls: + returning 0 on success and -1 on error, setting ``rte_errno`` to indicate the specific type of error. +* Where already standard in a given library, the alternative error approach may be used where the negative value is not -1 but is instead ``-errno`` if relevant, for example, ``-EINVAL``. + Note, however, to allow consistency across functions returning integer or pointer types, the previous approach is preferred for any new libraries. +* For functions where no error is possible, the function type should be ``void`` not ``int``. +* Routines returning ``void *`` should not have their return values cast to any pointer type. + (Typecasting can prevent the compiler from warning about missing prototypes as any implicit definition of a function returns int, + which, unlike ``void *``, needs a typecast to assign to a pointer variable.) + +.. note:: + + The above rule about not typecasting ``void *`` applies to malloc, as well as to DPDK functions. + +* Values in return statements should not be enclosed in parentheses. + +Logging and Errors +~~~~~~~~~~~~~~~~~~ + +In the DPDK environment, use the logging interface provided: + +.. code-block:: c + + #define RTE_LOGTYPE_TESTAPP1 RTE_LOGTYPE_USER1 + #define RTE_LOGTYPE_TESTAPP2 RTE_LOGTYPE_USER2 + + /* enable these logs type */ + rte_set_log_type(RTE_LOGTYPE_TESTAPP1, 1); + rte_set_log_type(RTE_LOGTYPE_TESTAPP2, 1); + + /* log in debug level */ + rte_set_log_level(RTE_LOG_DEBUG); + RTE_LOG(DEBUG, TESTAPP1, "this is is a debug level message\n"); + RTE_LOG(INFO, TESTAPP1, "this is is a info level message\n"); + RTE_LOG(WARNING, TESTAPP1, "this is is a warning level message\n"); + + /* log in info level */ + rte_set_log_level(RTE_LOG_INFO); + RTE_LOG(DEBUG, TESTAPP2, "debug level message (not displayed)\n"); + +Branch Prediction +~~~~~~~~~~~~~~~~~ + +* When a test is done in a critical zone (called often or in a data path) the code can use the ``likely()`` and ``unlikely()`` macros to indicate the expected, or preferred fast path. + They are expanded as a compiler builtin and allow the developer to indicate if the branch is likely to be taken or not. Example: + +.. code-block:: c + + #include + if (likely(x > 1)) + do_stuff(); + +.. note:: + + The use of ``likely()`` and ``unlikely()`` should only be done in performance critical paths, + and only when there is a clearly preferred path, or a measured performance increase gained from doing so. + These macros should be avoided in non-performance-critical code. + +Static Variables and Functions +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +* All functions and variables that are local to a file must be declared as ``static`` because it can often help the compiler to do some optimizations (such as, inlining the code). +* Functions that should be inlined should to be declared as ``static inline`` and can be defined in a .c or a .h file. + +.. note:: + Static functions defined in a header file must be declared as ``static inline`` in order to prevent compiler warnings about the function being unused. + +Const Attribute +~~~~~~~~~~~~~~~ + +The ``const`` attribute should be used as often as possible when a variable is read-only. + +Inline ASM in C code +~~~~~~~~~~~~~~~~~~~~ + +The ``asm`` and ``volatile`` keywords do not have underscores. The AT&T syntax should be used. +Input and output operands should be named to avoid confusion, as shown in the following example: + +.. code-block:: c + + asm volatile("outb %[val], %[port]" + : : + [port] "dN" (port), + [val] "a" (val)); + +Control Statements +~~~~~~~~~~~~~~~~~~ + +* Forever loops are done with for statements, not while statements. +* Elements in a switch statement that cascade should have a FALLTHROUGH comment. For example: + +.. code-block:: c + + switch (ch) { /* Indent the switch. */ + case 'a': /* Don't indent the case. */ + aflag = 1; /* Indent case body one tab. */ + /* FALLTHROUGH */ + case 'b': + bflag = 1; + break; + case '?': + default: + usage(); + /* NOTREACHED */ + } + +Environment or Architecture-specific Sources +-------------------------------------------- + +In DPDK and DPDK applications, some code is specific to an architecture (i686, x86_64) or to an executive environment (bsdapp or linuxapp) and so on. +As far as is possible, all such instances of architecture or env-specific code should be provided via standard APIs in the EAL. + +By convention, a file is common if it is not located in a directory indicating that it is specific. +For instance, a file located in a subdir of "x86_64" directory is specific to this architecture. +A file located in a subdir of "linuxapp" is specific to this execution environment. + +.. note:: + + Code in DPDK libraries and applications should be generic. + The correct location for architecture or executive environment specific code is in the EAL. + +When absolutely necessary, there are several ways to handle specific code: + +* Use a ``#ifdef`` with the CONFIG option in the C code. + This can be done when the differences are small and they can be embedded in the same C file: + +.. code-block: console + + #ifdef RTE_ARCH_I686 + toto(); + #else + titi(); + #endif + +* Use the CONFIG option in the Makefile. This is done when the differences are more significant. + In this case, the code is split into two separate files that are architecture or environment specific. This should only apply inside the EAL library. + +.. note: + + As in the linux kernel, the "CONFIG_" prefix is not used in C code. + This is only needed in Makefiles or shell scripts. + +Per Architecture Sources +~~~~~~~~~~~~~~~~~~~~~~~~ + +The following config options can be used: + +* CONFIG_RTE_ARCH is a string that contains the name of the architecture. +* CONFIG_RTE_ARCH_I686, CONFIG_RTE_ARCH_X86_64, CONFIG_RTE_ARCH_X86_64_32 or CONFIG_RTE_ARCH_PPC_64 are defined only if we are building for those architectures. + +Per Execution Environment Sources +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The following config options can be used: + +* CONFIG_RTE_EXEC_ENV is a string that contains the name of the executive environment. +* CONFIG_RTE_EXEC_ENV_BSDAPP or CONFIG_RTE_EXEC_ENV_LINUXAPP are defined only if we are building for this execution environment. + +Doxygen Documentation +--------------------- + +The API documentation is automatically generated in the DPDK framework. +That is why all files that are part of the public API must be documented using Doxygen syntax. + +The public API comprises functions of DPDK that can be used by an external application that will use the SDK. +Only the Doxygen syntax described in the coding rules (this document) should be used in the code. +All the Doxygen features are described in the Doxygen manual online. + +Documenting a Function +~~~~~~~~~~~~~~~~~~~~~~ + +All public functions must be documented. The documentation is placed in the header file, above the declaration of the function. +The definition of the function may be documented, but using standard comments (not in doxygen format). +The following is an example of function documentation: + +.. code-block:: c + + /** + * Summary here; one sentence on one line (should not exceed 80 chars). + * + * A more detailed description goes here. + * + * A blank line forms a paragraph. There should be no trailing white-space + * anywhere. + * + * @param first + * "@param" is a Doxygen directive to describe a function parameter. Like + * some other directives, it takes a term/summary on the same line and a + * description (this text) indented by 2 spaces on the next line. All + * descriptive text should wrap at 80 chars, without going over. + * Newlines are NOT supported within directives; if a newline would be + * before this text, it would be appended to the general description above. + * @param second + * There should be no newline between multiple directives (of the same + * type). + * + * @return + * "@return" is a different Doxygen directive to describe the return value + * of a function, if there is any. + */ + int rte_foo(int first, int second) + + +Documenting Files +~~~~~~~~~~~~~~~~~ + +Each public file may start with a comment describing what the file does. For example: + +.. code-block:: c + + /** + * @file + * This file describes the coding rules of RTE. + * + * It contains the coding rules of C code, ASM code, reStructured + * Text documentation, and of course how to use doxygen to document + * public API. + */ + + +Documenting Constants and Variables +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Examples: + +.. code-block:: c + + /** + * The definition of a funny TRUE. + */ + #define TRUE 0 + + #define TRUE 1 /**< another way to document a macro */ + + /** + * Frequency of the HPET counter in Hz + * + * @see rte_eal_hpet_init() + */ + extern uint64_t eal_hpet_resolution_hz; + + +Documenting Structures +~~~~~~~~~~~~~~~~~~~~~~ + +Public structures should also be documented. +The ``/**<`` sequence can be used to documented the fields of the structure, as shown in the following example: + +.. code-block:: c + + /** + * Structure describing a memzone, which is a contiguous portions of + * physical memory identified by a name. + */ + struct rte_memzone { + + #define MEMZONE_NAMESIZE 32 + char name[MEMZONE_NAMESIZE]; /**< name of the memory zone */ + + phys_addr_t phys_addr; /**< start physical address */ + void *addr; /**< start virtual address */ + uint64_t len; /**< len of the memzone */ + + int socket_id; /**< NUMA socket id */ + }; + + +See Also Sections +~~~~~~~~~~~~~~~~~ + +The @see keyword can be used to highlight a link to an existing function, file, or URL. +This directive should be placed on one line, without anything else, at the bottom of the documentation header. + +.. code-block:: c + + /** + * (documentation of function, file, ...) + * + * @see rte_foo() + * @see eal_memzone.c + */ diff --git a/doc/guides/guidelines/index.rst b/doc/guides/guidelines/index.rst new file mode 100644 index 0000000000..b2b0a92276 --- /dev/null +++ b/doc/guides/guidelines/index.rst @@ -0,0 +1,8 @@ +Guidelines +========== + +.. toctree:: + :maxdepth: 2 + :numbered: + + coding_style diff --git a/doc/guides/index.rst b/doc/guides/index.rst index 44e8432b41..0a89efd412 100644 --- a/doc/guides/index.rst +++ b/doc/guides/index.rst @@ -45,3 +45,4 @@ Contents: sample_app_ug/index testpmd_app_ug/index rel_notes/index + guidelines/index