From: Hyong Youb Kim <hyonkim@cisco.com>
Date: Wed, 10 Jan 2018 09:17:09 +0000 (-0800)
Subject: net/enic: use dynamic log types
X-Git-Tag: spdx-start~347
X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=36efba2f93c45b18cf21642034517206d4784d42;p=dpdk.git

net/enic: use dynamic log types

"pmd.enic.init" replaces CONFIG_RTE_LIBRTE_ENIC_DEBUG
"pmd.enic.flow" replaces CONFIG_RTE_LIBRTE_ENIC_DEBUG_FLOW

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
---

diff --git a/config/common_base b/config/common_base
index d92bc2a80b..90508a855e 100644
--- a/config/common_base
+++ b/config/common_base
@@ -265,8 +265,6 @@ CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
 # Compile burst-oriented Cisco ENIC PMD driver
 #
 CONFIG_RTE_LIBRTE_ENIC_PMD=y
-CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
-CONFIG_RTE_LIBRTE_ENIC_DEBUG_FLOW=n
 
 #
 # Compile burst-oriented Netronome NFP PMD driver
diff --git a/doc/guides/nics/enic.rst b/doc/guides/nics/enic.rst
index 22df466b48..4dffce1a69 100644
--- a/doc/guides/nics/enic.rst
+++ b/doc/guides/nics/enic.rst
@@ -52,12 +52,6 @@ Configuration information
   - **CONFIG_RTE_LIBRTE_ENIC_PMD** (default y): Enables or disables inclusion
     of the ENIC PMD driver in the DPDK compilation.
 
-  - **CONFIG_RTE_LIBRTE_ENIC_DEBUG** (default n): Enables or disables debug
-    logging within the ENIC PMD driver.
-
-  - **CONFIG_RTE_LIBRTE_ENIC_DEBUG_FLOW** (default n): Enables or disables flow
-    API related debug logging within the ENIC PMD driver.
-
 - **vNIC Configuration Parameters**
 
   - **Number of Queues**
diff --git a/drivers/net/enic/enic_compat.h b/drivers/net/enic/enic_compat.h
index 1cb5686f8f..4fb92dd9cb 100644
--- a/drivers/net/enic/enic_compat.h
+++ b/drivers/net/enic/enic_compat.h
@@ -84,6 +84,8 @@
 #define dev_warning(x, args...) dev_printk(WARNING, args)
 #define dev_debug(x, args...) dev_printk(DEBUG, args)
 
+extern int enicpmd_logtype_flow;
+
 #define __le16 u16
 #define __le32 u32
 #define __le64 u64
diff --git a/drivers/net/enic/enic_ethdev.c b/drivers/net/enic/enic_ethdev.c
index 24916312fb..5132966d00 100644
--- a/drivers/net/enic/enic_ethdev.c
+++ b/drivers/net/enic/enic_ethdev.c
@@ -49,12 +49,14 @@
 #include "vnic_enet.h"
 #include "enic.h"
 
-#ifdef RTE_LIBRTE_ENIC_DEBUG
-#define ENICPMD_FUNC_TRACE() \
-	RTE_LOG(DEBUG, PMD, "ENICPMD trace: %s\n", __func__)
-#else
-#define ENICPMD_FUNC_TRACE() (void)0
-#endif
+int enicpmd_logtype_init;
+int enicpmd_logtype_flow;
+
+#define PMD_INIT_LOG(level, fmt, args...) \
+	rte_log(RTE_LOG_ ## level, enicpmd_logtype_init, \
+		"%s" fmt "\n", __func__, ##args)
+
+#define ENICPMD_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
 
 /*
  * The set of PCI devices this driver supports
@@ -66,6 +68,18 @@ static const struct rte_pci_id pci_id_enic_map[] = {
 	{.vendor_id = 0, /* sentinel */},
 };
 
+RTE_INIT(enicpmd_init_log);
+static void
+enicpmd_init_log(void)
+{
+	enicpmd_logtype_init = rte_log_register("pmd.enic.init");
+	if (enicpmd_logtype_init >= 0)
+		rte_log_set_level(enicpmd_logtype_init, RTE_LOG_NOTICE);
+	enicpmd_logtype_flow = rte_log_register("pmd.enic.flow");
+	if (enicpmd_logtype_flow >= 0)
+		rte_log_set_level(enicpmd_logtype_flow, RTE_LOG_NOTICE);
+}
+
 static int
 enicpmd_fdir_ctrl_func(struct rte_eth_dev *eth_dev,
 			enum rte_filter_op filter_op, void *arg)
diff --git a/drivers/net/enic/enic_flow.c b/drivers/net/enic/enic_flow.c
index a728d0777e..190762eb68 100644
--- a/drivers/net/enic/enic_flow.c
+++ b/drivers/net/enic/enic_flow.c
@@ -42,15 +42,12 @@
 #include "vnic_dev.h"
 #include "vnic_nic.h"
 
-#ifdef RTE_LIBRTE_ENIC_DEBUG_FLOW
 #define FLOW_TRACE() \
-	RTE_LOG(DEBUG, PMD, "%s()\n", __func__)
+	rte_log(RTE_LOG_DEBUG, enicpmd_logtype_flow, \
+		"%s()\n", __func__)
 #define FLOW_LOG(level, fmt, args...) \
-	RTE_LOG(level, PMD, fmt, ## args)
-#else
-#define FLOW_TRACE() do { } while (0)
-#define FLOW_LOG(level, fmt, args...) do { } while (0)
-#endif
+	rte_log(RTE_LOG_ ## level, enicpmd_logtype_flow, \
+		fmt "\n", ##args)
 
 /** Info about how to copy items into enic filters. */
 struct enic_items {