From: Ouyang Changchun Date: Mon, 29 Sep 2014 07:16:14 +0000 (+0800) Subject: ixgbe/base: refactor manageability block communication X-Git-Tag: spdx-start~10364 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=36f43e8679aee72e1028ffd15ae97bf2783eac73;p=dpdk.git ixgbe/base: refactor manageability block communication Introduce a new argument to let caller determine if it need read and return data or not after executing host interface command in IXGBE base code. Signed-off-by: Changchun Ouyang --- diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c index de77eff8b6..1f609b953a 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c @@ -4341,41 +4341,50 @@ u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) * @buffer: contains the command to write and where the return status will * be placed * @length: length of buffer, must be multiple of 4 bytes + * @return_data: read and return data from the buffer (true) or not (false) + * Needed because FW structures are big endian and decoding of + * these fields can be 8 bit or 16 bit based on command. Decoding + * is not easily understood without making a table of commands. + * So we will leave this up to the caller to read back the data + * in these cases. * * Communicates with the manageability block. On success return IXGBE_SUCCESS * else return IXGBE_ERR_HOST_INTERFACE_COMMAND. **/ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, - u32 length) + u32 length, bool return_data) { - u32 hicr, i, bi; + u32 hicr, i, bi, fwsts; u32 hdr_size = sizeof(struct ixgbe_hic_hdr); - u8 buf_len, dword_len; - - s32 ret_val = IXGBE_SUCCESS; + u16 buf_len; + u8 dword_len; DEBUGFUNC("ixgbe_host_interface_command"); - if (length == 0 || length & 0x3 || - length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) { - DEBUGOUT("Buffer length failure.\n"); - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - goto out; + if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) { + DEBUGOUT1("Buffer length failure buffersize=%d.\n", length); + return IXGBE_ERR_HOST_INTERFACE_COMMAND; } + /* Set bit 9 of FWSTS clearing FW reset indication */ + fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS); + IXGBE_WRITE_REG(hw, IXGBE_FWSTS, fwsts | IXGBE_FWSTS_FWRI); /* Check that the host interface is enabled. */ hicr = IXGBE_READ_REG(hw, IXGBE_HICR); if ((hicr & IXGBE_HICR_EN) == 0) { DEBUGOUT("IXGBE_HOST_EN bit disabled.\n"); - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - goto out; + return IXGBE_ERR_HOST_INTERFACE_COMMAND; + } + + /* Calculate length in DWORDs. We must be DWORD aligned */ + if ((length % (sizeof(u32))) != 0) { + DEBUGOUT("Buffer length failure, not aligned to dword"); + return IXGBE_ERR_INVALID_ARGUMENT; } - /* Calculate length in DWORDs */ dword_len = length >> 2; - /* - * The device driver writes the relevant command block + /* The device driver writes the relevant command block * into the ram area. */ for (i = 0; i < dword_len; i++) @@ -4392,14 +4401,17 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, msec_delay(1); } - /* Check command successful completion. */ + /* Check command completion */ if (i == IXGBE_HI_COMMAND_TIMEOUT || - (!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) { - DEBUGOUT("Command has failed with no status valid.\n"); - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - goto out; + !(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) { + ERROR_REPORT1(IXGBE_ERROR_CAUTION, + "Command has failed with no status valid.\n"); + return IXGBE_ERR_HOST_INTERFACE_COMMAND; } + if (!return_data) + return 0; + /* Calculate length in DWORDs */ dword_len = hdr_size >> 2; @@ -4412,25 +4424,23 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, /* If there is any thing in data position pull it in */ buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len; if (buf_len == 0) - goto out; + return 0; - if (length < (buf_len + hdr_size)) { + if (length < buf_len + hdr_size) { DEBUGOUT("Buffer not large enough for reply message.\n"); - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - goto out; + return IXGBE_ERR_HOST_INTERFACE_COMMAND; } /* Calculate length in DWORDs, add 3 for odd lengths */ dword_len = (buf_len + 3) >> 2; - /* Pull in the rest of the buffer (bi is where we left off)*/ + /* Pull in the rest of the buffer (bi is where we left off) */ for (; bi <= dword_len; bi++) { buffer[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi); IXGBE_LE32_TO_CPUS(&buffer[bi]); } -out: - return ret_val; + return 0; } /** @@ -4477,7 +4487,7 @@ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, - sizeof(fw_cmd)); + sizeof(fw_cmd), true); if (ret_val != IXGBE_SUCCESS) continue; diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.h b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.h index 03e71c010c..8b8bd0be42 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.h +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.h @@ -157,7 +157,8 @@ s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, u8 ver); u8 ixgbe_calculate_checksum(u8 *buffer, u32 length); s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, - u32 length); + u32 length, bool return_data); + void ixgbe_clear_tx_pending(struct ixgbe_hw *hw); extern s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);