From: Olivier Matz Date: Sat, 24 May 2014 16:52:21 +0000 (+0200) Subject: uart: fix compilation on recent avr-gcc X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=3b7b449237422537c8cdf124b0f4dde827787e14;p=aversive.git uart: fix compilation on recent avr-gcc Signed-off-by: Olivier Matz --- diff --git a/modules/comm/uart/test/.config b/modules/comm/uart/test/.config index f397aae..eaa69c5 100644 --- a/modules/comm/uart/test/.config +++ b/modules/comm/uart/test/.config @@ -11,6 +11,7 @@ # CONFIG_MCU_AT90S2343 is not set # CONFIG_MCU_ATTINY22 is not set # CONFIG_MCU_ATTINY26 is not set +# CONFIG_MCU_ATTINY45 is not set # CONFIG_MCU_AT90S4414 is not set # CONFIG_MCU_AT90S4433 is not set # CONFIG_MCU_AT90S4434 is not set @@ -40,6 +41,7 @@ CONFIG_MCU_ATMEGA168=y # CONFIG_MCU_ATMEGA32 is not set # CONFIG_MCU_ATMEGA323 is not set # CONFIG_MCU_ATMEGA325 is not set +# CONFIG_MCU_ATMEGA328P is not set # CONFIG_MCU_ATMEGA3250 is not set # CONFIG_MCU_ATMEGA64 is not set # CONFIG_MCU_ATMEGA645 is not set @@ -51,6 +53,9 @@ CONFIG_MCU_ATMEGA168=y # CONFIG_MCU_AT90S1200 is not set # CONFIG_MCU_ATMEGA2560 is not set # CONFIG_MCU_ATMEGA256 is not set +# CONFIG_MCU_ATXMEGA128A1 is not set +# CONFIG_MCU_ATMEGA168P is not set +# CONFIG_MCU_ATMEGA1284P is not set CONFIG_QUARTZ=16000000 # @@ -79,7 +84,9 @@ CONFIG_MODULE_CIRBUF=y # CONFIG_MODULE_FIXED_POINT is not set # CONFIG_MODULE_VECT2 is not set # CONFIG_MODULE_GEOMETRY is not set +CONFIG_MODULE_HOSTSIM=y # CONFIG_MODULE_SCHEDULER is not set +# CONFIG_MODULE_SCHEDULER_STATS is not set # CONFIG_MODULE_SCHEDULER_CREATE_CONFIG is not set # CONFIG_MODULE_SCHEDULER_USE_TIMERS is not set CONFIG_MODULE_SCHEDULER_TIMER0=y @@ -160,9 +167,10 @@ CONFIG_MODULE_UART_CREATE_CONFIG=y # CONFIG_MODULE_ENCODERS_SPI_CREATE_CONFIG is not set # -# Robot specific modules +# Robot specific modules (fixed point lib may be needed) # # CONFIG_MODULE_ROBOT_SYSTEM is not set +# CONFIG_MODULE_ROBOT_SYSTEM_USE_F64 is not set # CONFIG_MODULE_ROBOT_SYSTEM_MOT_AND_EXT is not set # CONFIG_MODULE_POSITION_MANAGER is not set # CONFIG_MODULE_COMPENSATE_CENTRIFUGAL_FORCE is not set @@ -187,6 +195,9 @@ CONFIG_MODULE_UART_CREATE_CONFIG=y # # CONFIG_MODULE_CC2420 is not set # CONFIG_MODULE_CC2420_CREATE_CONFIG is not set +# CONFIG_MODULE_XBEE is not set +# CONFIG_MODULE_XBEE_STATS is not set +# CONFIG_MODULE_XBEE_ATCMD_HELP is not set # # Crypto modules @@ -232,12 +243,15 @@ CONFIG_AVRDUDE_PROG_STK200=y # CONFIG_AVRDUDE_PROG_PAVR is not set # CONFIG_AVRDUDE_PROG_BUTTERFLY is not set # CONFIG_AVRDUDE_PROG_AVR910 is not set +# CONFIG_AVRDUDE_PROG_AVR911 is not set # CONFIG_AVRDUDE_PROG_STK500 is not set # CONFIG_AVRDUDE_PROG_AVRISP is not set # CONFIG_AVRDUDE_PROG_BSD is not set # CONFIG_AVRDUDE_PROG_DAPA is not set # CONFIG_AVRDUDE_PROG_JTAG1 is not set # CONFIG_AVRDUDE_PROG_AVR109 is not set +# CONFIG_AVRDUDE_PROG_AVRISPMKII is not set +# CONFIG_AVRDUDE_PROG_ARDUINO is not set CONFIG_AVRDUDE_PORT="/dev/parport0" CONFIG_AVRDUDE_BAUDRATE=19200 diff --git a/modules/comm/uart/test/main.c b/modules/comm/uart/test/main.c index b5ef729..23ed2f0 100644 --- a/modules/comm/uart/test/main.c +++ b/modules/comm/uart/test/main.c @@ -1,6 +1,6 @@ -/* +/* * Copyright Droids Corporation, Microb Technology, Eirbot (2005) - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -18,25 +18,51 @@ * Revision : $Id: main.c,v 1.15.10.5 2008-12-27 16:29:08 zer0 Exp $ * */ -#include #include +#include + +#include #include -#include -#include +/* sending "pop" on cmdline uart resets the robot */ +void emergency(char c) +{ + static uint8_t i = 0; + + printf("%c\n", c); + + if ((i == 0 && c == 'p') || + (i == 1 && c == 'o') || + (i == 2 && c == 'p')) + i++; + else if ( !(i == 1 && c == 'p') ) + i = 0; + if (i == 3) { +#ifdef HOST_VERSION + hostsim_uart_exit(); +#endif + reset(); + } +} /* * This code sends a counter value to uart. */ int main(void) -{ +{ int i; +#ifdef HOST_VERSION + hostsim_uart_init(); + hostsim_ittimer_enable(100000); +#endif + /* initialize uart with the default parameters ( see * uart_config.h ) */ - uart_init(); - + uart_init(); + uart_register_rx_event(0, emergency); + /* enable interrupts */ sei(); @@ -47,24 +73,26 @@ int main(void) wait_ms(100); } uart_send(0, '\n'); - + +#ifndef HOST_VERSION /* now we want to do a printf : we must register the * uart0_send as stdout. Here no receive function is * specified. */ fdevopen(uart0_dev_send, NULL); - +#endif + /** ready to do a nice printf on the uart */ printf("Uart is cool !!\n"); - - /* one drawback of the previous printf is that the format - * chain is srored in RAM and this can take a huge size if + + /* one drawback of the previous printf is that the format + * chain is stored in RAM and this can take a huge size if * there are many printf. To avoid this problem, please use - * printf_P together with PSTR, like in the next example. */ + * printf_P together with PSTR, like in the next example. */ while (1) { printf_P(PSTR("This format string takes no RAM " "space. %i\n"), i++); wait_ms(1000); } - + return 0; } diff --git a/modules/comm/uart/uart.c b/modules/comm/uart/uart.c index 231d599..102db28 100644 --- a/modules/comm/uart/uart.c +++ b/modules/comm/uart/uart.c @@ -84,55 +84,55 @@ const struct regs uart_regs[UART_HW_NUM] = { * there is no new data in the transmit buffer. */ #ifdef UART0_COMPILE -#ifndef SIG_UART0_DATA +#ifndef USART0_UDRE_vect #if defined(USART_UDRE_vect) -#define SIG_UART0_DATA USART_UDRE_vect -#elif defined(USART0_UDRE_vect) -#define SIG_UART0_DATA USART0_UDRE_vect +#define USART0_UDRE_vect USART_UDRE_vect #elif defined(SIG_USART0_DATA) -#define SIG_UART0_DATA SIG_USART0_DATA +#define USART0_UDRE_vect SIG_USART0_DATA +#elif defined(SIG_UART0_DATA) +#define USART0_UDRE_vect SIG_UART0_DATA #endif #endif -SIGNAL(SIG_UART0_DATA) +SIGNAL(USART0_UDRE_vect) { uart_send_next_char(0); } #endif #ifdef UART1_COMPILE -#ifndef SIG_UART1_DATA -#if defined(USART1_UDRE_vect) -#define SIG_UART1_DATA USART1_UDRE_vect -#elif defined(SIG_USART1_DATA) -#define SIG_UART1_DATA SIG_USART1_DATA +#ifndef USART1_UDRE_vect +#if defined(SIG_USART1_DATA) +#define USART1_UDRE_vect SIG_USART1_DATA +#elif defined(SIG_UART1_DATA) +#define USART1_UDRE_vect SIG_UART1_DATA #endif #endif -SIGNAL(SIG_UART1_DATA) +SIGNAL(USART1_UDRE_vect) { uart_send_next_char(1); } #endif #ifdef UART2_COMPILE -#ifndef SIG_UART2_DATA -#if defined(USART2_UDRE_vect) -#define SIG_UART2_DATA USART2_UDRE_vect -#elif defined(SIG_USART2_DATA) -#define SIG_UART2_DATA SIG_USART2_DATA +#ifndef USART2_UDRE_vect +#if defined(SIG_USART2_DATA) +#define USART2_UDRE_vect SIG_USART2_DATA +#elif defined(SIG_UART2_DATA) +#define USART2_UDRE_vect SIG_UART2_DATA #endif #endif -SIGNAL(SIG_UART2_DATA) +SIGNAL(USART2_UDRE_vect) { uart_send_next_char(2); } #endif #ifdef UART3_COMPILE -#ifndef SIG_UART3_DATA -#if defined(USART3_UDRE_vect) -#define SIG_UART3_DATA USART3_UDRE_vect -#elif defined(SIG_USART3_DATA) -#define SIG_UART3_DATA SIG_USART3_DATA +#ifndef USART3_UDRE_vect +#if defined(SIG_USART3_DATA) +#define USART3_UDRE_vect SIG_USART3_DATA +#elif defined(SIG_UART3_DATA) +#define USART3_UDRE_vect SIG_UART3_DATA #endif #endif -SIGNAL(SIG_UART3_DATA) +SIGNAL(USART3_UDRE_vect) { uart_send_next_char(3); } @@ -145,55 +145,55 @@ static void uart_recv_next_char(uint8_t num); * a new unread data in the reception buffer. */ #ifdef UART0_COMPILE -#ifndef SIG_UART0_RECV +#ifndef USART0_RX_vect #if defined(USART_RX_vect) -#define SIG_UART0_RECV USART_RX_vect -#elif defined(USART0_RX_vect) -#define SIG_UART0_RECV USART0_RX_vect +#define USART0_RX_vect USART_RX_vect #elif defined(SIG_USART0_RECV) -#define SIG_UART0_RECV SIG_USART0_RECV +#define USART0_RX_vect SIG_USART0_RECV +#elif defined(SIG_UART0_RECV) +#define USART0_RX_vect SIG_UART0_RECV #endif #endif -SIGNAL(SIG_UART0_RECV) +SIGNAL(USART0_RX_vect) { uart_recv_next_char(0); } #endif #ifdef UART1_COMPILE -#ifndef SIG_UART1_RECV -#if defined(USART1_RX_vect) -#define SIG_UART1_RECV USART1_RX_vect -#elif defined(SIG_USART1_RECV) -#define SIG_UART1_RECV SIG_USART1_RECV +#ifndef USART1_RX_vect +#if defined(SIG_USART1_RECV) +#define USART1_RX_vect SIG_USART1_RECV +#elif defined(SIG_UART1_RECV) +#define USART1_RX_vect SIG_UART1_RECV #endif #endif -SIGNAL(SIG_UART1_RECV) +SIGNAL(USART1_RX_vect) { uart_recv_next_char(1); } #endif #ifdef UART2_COMPILE -#ifndef SIG_UART2_RECV -#if defined(USART2_RX_vect) -#define SIG_UART2_RECV USART2_RX_vect -#elif defined(SIG_USART2_RECV) -#define SIG_UART2_RECV SIG_USART2_RECV +#ifndef USART2_RX_vect +#if defined(SIG_USART2_RECV) +#define USART2_RX_vect SIG_USART2_RECV +#elif defined(SIG_UART2_RECV) +#define USART2_RX_vect SIG_UART2_RECV #endif #endif -SIGNAL(SIG_UART2_RECV) +SIGNAL(USART2_RX_vect) { uart_recv_next_char(2); } #endif #ifdef UART3_COMPILE -#ifndef SIG_UART3_RECV -#if defined(USART3_RX_vect) -#define SIG_UART3_RECV USART3_RX_vect -#elif defined(SIG_USART3_RECV) -#define SIG_UART3_RECV SIG_USART3_RECV +#ifndef USART3_RX_vect +#if defined(SIG_USART3_RECV) +#define USART3_RX_vect SIG_USART3_RECV +#elif defined(SIG_UART3_RECV) +#define USART3_RX_vect SIG_UART3_RECV #endif #endif -SIGNAL(SIG_UART3_RECV) +SIGNAL(USART3_RX_vect) { uart_recv_next_char(3); } diff --git a/modules/comm/uart/uart_defs.h b/modules/comm/uart/uart_defs.h index e8d6171..9a7e437 100644 --- a/modules/comm/uart/uart_defs.h +++ b/modules/comm/uart/uart_defs.h @@ -44,23 +44,6 @@ #endif -/* For arch with only one UART, we consider that UART0 = UART */ -#if !defined(SIG_UART0_DATA) && !defined(SIG_USART0_DATA) -#if defined SIG_UART_DATA -#define SIG_UART0_DATA SIG_UART_DATA -#elif defined SIG_USART_DATA -#define SIG_UART0_DATA SIG_USART_DATA -#endif -#endif - -#if !defined(SIG_UART0_RECV) && !defined(SIG_USART0_RECV) -#if defined SIG_UART_RECV -#define SIG_UART0_RECV SIG_UART_RECV -#elif defined SIG_USART_RECV -#define SIG_UART0_RECV SIG_USART_RECV -#endif -#endif - #if !defined(UDR0) && defined(UDR) #define UDR0 UDR #endif @@ -214,14 +197,10 @@ /* if the signal USART is defined, the uC has a USART. */ -#if ( defined SIG_USART0_RECV ) || ( defined SIG_USART_RECV ) -#define UART_IS_USART 1 -#elif (defined USART_UDRE_vect) || (defined USART_TXC_vect) || (defined USART_RXC_vect) -#define UART_IS_USART 1 -#elif (defined USART1_UDRE_vect) || (defined USART1_TXC_vect) || (defined USART1_RXC_vect) -#define UART_IS_USART 1 -#else +#if defined(UART_TX_vect) #define UART_IS_USART 0 +#else +#define UART_IS_USART 1 #endif /* if the U2X macro is defined, the uC has the U2X option. */ diff --git a/modules/comm/uart/uart_setconf.c b/modules/comm/uart/uart_setconf.c index 7088887..91c12af 100644 --- a/modules/comm/uart/uart_setconf.c +++ b/modules/comm/uart/uart_setconf.c @@ -98,10 +98,10 @@ static int8_t uart_set_nbits_parity(int8_t num, struct uart_config * u) { /* number of bit in the frame */ if (u->nbits == 8) - *uart_regs[num].ucsrb &= ~(1 << CHR9); + *uart_regs[num].ucsrb &= ~(1 << UCSZ2); #ifdef CONFIG_MODULE_UART_9BITS else if (u->nbits == 9) - *uart_regs[num].ucsrb |= (1 << CHR9); + *uart_regs[num].ucsrb |= (1 << UCSZ2); #endif else return ENOTSUP;