From: Shaopeng He Date: Fri, 5 Feb 2016 02:46:11 +0000 (+0800) Subject: fm10k: fix switch manager high CPU usage X-Git-Tag: spdx-start~7342 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=3b845bf6bcd9;p=dpdk.git fm10k: fix switch manager high CPU usage fm10k switch core uses source MAC + VID + SGLORT to do look up in MAC table. If no match, an exception interrupt will be sent to the switch manager. Too much of this kind of exception interrupts cause switch manager side high CPU usage. To reproduce this issue, one DPDK testpmd runs on a server with one fm10k NIC, mac forwards test traffic from one of fm10k ports to another port. The CPU usage for the switch manager will go up to about 20% for test traffic rate at 10G bps, comparing to near 0% for no test traffic. This patch fixes this issue. A default SGLORT is assigned to each TX queue. This default value works for non-VMDq mode and current VMDq example. For advanced VMDq usage, e.g. different source MAC address for different TX queue, FTAG forwarding function could be used to change this default SGLORT value. Fixes: 9ae6068c86da ("fm10k: add dev start/stop") Signed-off-by: Shaopeng He Acked-by: Jing Chen --- diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c index 3ae604ddb9..3c1e1d61fc 100644 --- a/drivers/net/fm10k/fm10k_ethdev.c +++ b/drivers/net/fm10k/fm10k_ethdev.c @@ -675,6 +675,9 @@ fm10k_dev_tx_init(struct rte_eth_dev *dev) FM10K_WRITE_REG(hw, FM10K_TDBAH(i), base_addr >> (CHAR_BIT * sizeof(uint32_t))); FM10K_WRITE_REG(hw, FM10K_TDLEN(i), size); + + /* assign default SGLORT for each TX queue */ + FM10K_WRITE_REG(hw, FM10K_TX_SGLORT(i), hw->mac.dglort_map); } /* set up vector or scalar TX function as appropriate */