From: Remy Horton Date: Tue, 10 Apr 2018 09:43:16 +0000 (+0100) Subject: ethdev: support PMD-tuned Tx/Rx parameters X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=3be82f5cc5e3;p=dpdk.git ethdev: support PMD-tuned Tx/Rx parameters The optimal values of several transmission & reception related parameters, such as burst sizes, descriptor ring sizes, and number of queues, varies between different network interface devices. This patch allows individual PMDs to specify preferred parameter values. Signed-off-by: Remy Horton Reviewed-by: Ferruh Yigit Acked-by: Shreyansh Jain Acked-by: Thomas Monjalon --- diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 473eff34de..16eb3287b3 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -94,19 +94,6 @@ Deprecation Notices The new API add rss_level field to ``rte_eth_rss_conf`` to enable a choice of RSS hash calculation on outer or inner header of tunneled packet. -* ethdev: Currently, if the rte_eth_rx_burst() function returns a value less - than *nb_pkts*, the application will assume that no more packets are present. - Some of the hw queue based hardware can only support smaller burst for RX - and TX and thus break the expectation of the rx_burst API. Similar is the - case for TX burst as well as ring sizes. ``rte_eth_dev_info`` will be added - with following new parameters so as to support semantics for drivers to - define a preferred size for Rx/Tx burst and rings. - - - Member ``struct preferred_size`` would be added to enclose all preferred - size to be fetched from driver/implementation. - - Members ``uint16_t rx_burst``, ``uint16_t tx_burst``, ``uint16_t rx_ring``, - and ``uint16_t tx_ring`` would be added to ``struct preferred_size``. - * ethdev: A work is being planned for 18.05 to expose VF port representors as a mean to perform control and data path operation on the different VFs. As VF representor is an ethdev port, new fields are needed in order to map diff --git a/doc/guides/rel_notes/release_18_05.rst b/doc/guides/rel_notes/release_18_05.rst index 3731ffdd7c..faf7af0ac8 100644 --- a/doc/guides/rel_notes/release_18_05.rst +++ b/doc/guides/rel_notes/release_18_05.rst @@ -41,6 +41,11 @@ New Features Also, make sure to start the actual text at the margin. ========================================================= +* **Added PMD-recommended Tx and Rx parameters** + + Applications can now query drivers for device-tuned values of + ring sizes, burst sizes, and number of queues. + * **Added RSS hash and key update to CXGBE PMD.** Support to update RSS hash and key has been added to CXGBE PMD. @@ -117,6 +122,30 @@ API Changes * ethdev, in struct ``struct rte_eth_dev_info``, field ``rte_pci_device *pci_dev`` replaced with field ``struct rte_device *device``. +* **Changes to semantics of rte_eth_dev_configure() parameters.** + + If both the ``nb_rx_q`` and ``nb_tx_q`` parameters are zero, + ``rte_eth_dev_configure`` will now use PMD-recommended queue sizes, or if + recommendations are not provided by the PMD the function will use ethdev + fall-back values. Previously setting both of the parameters to zero would + have resulted in ``-EINVAL`` being returned. + +* **Changes to semantics of rte_eth_rx_queue_setup() parameters.** + + If the ``nb_rx_desc`` parameter is zero, ``rte_eth_rx_queue_setup`` will + now use the PMD-recommended Rx ring size, or in the case where the PMD + does not provide a recommendation, will use an ethdev-provided + fall-back value. Previously, setting ``nb_rx_desc`` to zero would have + resulted in an error. + +* **Changes to semantics of rte_eth_tx_queue_setup() parameters.** + + If the ``nb_tx_desc`` parameter is zero, ``rte_eth_tx_queue_setup`` will + now use the PMD-recommended Tx ring size, or in the case where the PMD + does not provide a recoomendation, will use an ethdev-provided + fall-back value. Previously, setting ``nb_tx_desc`` to zero would have + resulted in an error. + ABI Changes ----------- @@ -131,6 +160,13 @@ ABI Changes Also, make sure to start the actual text at the margin. ========================================================= +* **Additional fields in rte_eth_dev_info.** + + The ``rte_eth_dev_info`` structure has had two extra entries appended to the + end of it: ``default_rxportconf`` and ``default_txportconf``. Each of these + in turn are ``rte_eth_dev_portconf`` structures containing three fields of + type ``uint16_t``: ``burst_size``, ``ring_size``, and ``nb_queues``. These + are parameter values recommended for use by the PMD. Removed Items ------------- diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c index fcc6621d69..a023b3e8a1 100644 --- a/lib/librte_ether/rte_ethdev.c +++ b/lib/librte_ether/rte_ethdev.c @@ -1061,6 +1061,26 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q, RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL); + dev = &rte_eth_devices[port_id]; + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP); + (*dev->dev_ops->dev_infos_get)(dev, &dev_info); + + /* If number of queues specified by application for both Rx and Tx is + * zero, use driver preferred values. This cannot be done individually + * as it is valid for either Tx or Rx (but not both) to be zero. + * If driver does not provide any preferred valued, fall back on + * EAL defaults. + */ + if (nb_rx_q == 0 && nb_tx_q == 0) { + nb_rx_q = dev_info.default_rxportconf.nb_queues; + if (nb_rx_q == 0) + nb_rx_q = RTE_ETH_DEV_FALLBACK_RX_NBQUEUES; + nb_tx_q = dev_info.default_txportconf.nb_queues; + if (nb_tx_q == 0) + nb_tx_q = RTE_ETH_DEV_FALLBACK_TX_NBQUEUES; + } + if (nb_rx_q > RTE_MAX_QUEUES_PER_PORT) { RTE_PMD_DEBUG_TRACE( "Number of RX queues requested (%u) is greater than max supported(%d)\n", @@ -1075,8 +1095,6 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q, return -EINVAL; } - dev = &rte_eth_devices[port_id]; - RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP); RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_configure, -ENOTSUP); @@ -1106,13 +1124,6 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q, * than the maximum number of RX and TX queues supported by the * configured device. */ - (*dev->dev_ops->dev_infos_get)(dev, &dev_info); - - if (nb_rx_q == 0 && nb_tx_q == 0) { - RTE_PMD_DEBUG_TRACE("ethdev port_id=%d both rx and tx queue cannot be 0\n", port_id); - return -EINVAL; - } - if (nb_rx_q > dev_info.max_rx_queues) { RTE_PMD_DEBUG_TRACE("ethdev port_id=%d nb_rx_queues=%d > %d\n", port_id, nb_rx_q, dev_info.max_rx_queues); @@ -1477,6 +1488,14 @@ rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id, return -EINVAL; } + /* Use default specified by driver, if nb_rx_desc is zero */ + if (nb_rx_desc == 0) { + nb_rx_desc = dev_info.default_rxportconf.ring_size; + /* If driver default is also zero, fall back on EAL default */ + if (nb_rx_desc == 0) + nb_rx_desc = RTE_ETH_DEV_FALLBACK_RX_RINGSIZE; + } + if (nb_rx_desc > dev_info.rx_desc_lim.nb_max || nb_rx_desc < dev_info.rx_desc_lim.nb_min || nb_rx_desc % dev_info.rx_desc_lim.nb_align != 0) { @@ -1600,6 +1619,13 @@ rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id, rte_eth_dev_info_get(port_id, &dev_info); + /* Use default specified by driver, if nb_tx_desc is zero */ + if (nb_tx_desc == 0) { + nb_tx_desc = dev_info.default_txportconf.ring_size; + /* If driver default is zero, fall back on EAL default */ + if (nb_tx_desc == 0) + nb_tx_desc = RTE_ETH_DEV_FALLBACK_TX_RINGSIZE; + } if (nb_tx_desc > dev_info.tx_desc_lim.nb_max || nb_tx_desc < dev_info.tx_desc_lim.nb_min || nb_tx_desc % dev_info.tx_desc_lim.nb_align != 0) { diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h index 784c6faa42..4f417f573c 100644 --- a/lib/librte_ether/rte_ethdev.h +++ b/lib/librte_ether/rte_ethdev.h @@ -988,6 +988,27 @@ struct rte_eth_conf { struct rte_pci_device; +/* + * Fallback default preferred Rx/Tx port parameters. + * These are used if an application requests default parameters + * but the PMD does not provide preferred values. + */ +#define RTE_ETH_DEV_FALLBACK_RX_RINGSIZE 512 +#define RTE_ETH_DEV_FALLBACK_TX_RINGSIZE 512 +#define RTE_ETH_DEV_FALLBACK_RX_NBQUEUES 1 +#define RTE_ETH_DEV_FALLBACK_TX_NBQUEUES 1 + +/** + * Preferred Rx/Tx port parameters. + * There are separate instances of this structure for transmission + * and reception respectively. + */ +struct rte_eth_dev_portconf { + uint16_t burst_size; /**< Device-preferred burst size */ + uint16_t ring_size; /**< Device-preferred size of queue rings */ + uint16_t nb_queues; /**< Device-preferred number of queues */ +}; + /** * Ethernet device information */ @@ -1029,6 +1050,10 @@ struct rte_eth_dev_info { /** Configured number of rx/tx queues */ uint16_t nb_rx_queues; /**< Number of RX queues. */ uint16_t nb_tx_queues; /**< Number of TX queues. */ + /** Rx parameter recommendations */ + struct rte_eth_dev_portconf default_rxportconf; + /** Tx parameter recommendations */ + struct rte_eth_dev_portconf default_txportconf; }; /**