From: Bruce Richardson Date: Mon, 24 Nov 2014 15:50:39 +0000 (+0000) Subject: doc: add freebsd ports X-Git-Tag: spdx-start~9977 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=3e7b87dddbbf9c6bc27fcb7bbce41618853ad678;p=dpdk.git doc: add freebsd ports Since the DPDK is now part of the BSD ports collection, we should recommend installing from ports as the best way to get it up and running. In order to achieve this, while still keeping the document readable, the chapter on system requirements has been moved to instead be a section within the chapter on compiling the DPDK outside of the ports collection. This move is necessary, since it covered a lot of detail on installing other ports required to build DPDK. These steps are not needed when installing DPDK itself from ports. Signed-off-by: Bruce Richardson Acked-by: Bernard Iremonger --- diff --git a/doc/guides/freebsd_gsg/build_dpdk.rst b/doc/guides/freebsd_gsg/build_dpdk.rst index 8f72a5ea3d..5fdab4472c 100644 --- a/doc/guides/freebsd_gsg/build_dpdk.rst +++ b/doc/guides/freebsd_gsg/build_dpdk.rst @@ -28,9 +28,92 @@ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. _building_from_source: + Compiling the Intel® DPDK Target from Source ============================================ +.. note:: + + Testing has been performed using FreeBSD* 10.0-RELEASE (x86_64) and requires the + installation of the kernel sources, which should be included during the + installation of FreeBSD*. The Intel® DPDK also requires the use of FreeBSD* + ports to compile and function. + +System Requirements +------------------- + +The Intel® DPDK and its applications require the GNU make system (gmake) +to build on FreeBSD*. Optionally, gcc may also be used in place of clang +to build the Intel® DPDK, in which case it too must be installed prior to +compiling the Intel® DPDK. The installation of these tools is covered in this +section. + +Compiling the Intel® DPDK requires the FreeBSD kernel sources, which should be +included during the installation of FreeBSD* on the development platform. +The Intel® DPDK also requires the use of FreeBSD* ports to compile and function. + +To use the FreeBSD* ports system, it is required to update and extract the FreeBSD* +ports tree by issuing the following commands: + +.. code-block:: console + + root@host:~ # portsnap fetch + root@host:~ # portsnap extract + +If the environment requires proxies for external communication, these can be set +using: + +.. code-block:: console + + root@host:~ # setenv http_proxy : + root@host:~ # setenv ftp_proxy : + +The FreeBSD* ports below need to be installed prior to building the Intel® DPDK. +In general these can be installed using the following set of commands: + +#. cd /usr/ports/ + +#. make config-recursive + +#. make install + +#. make clean + +Each port location can be found using: + +.. code-block:: console + + user@host:~ # whereis + +The ports required and their locations are as follows: + +dialog4ports + /usr/ports/ports-mgmt/dialog4ports + +GNU make(gmake) + /usr/ports/devel/gmake + +coreutils + /usr/ports/sysutils/coreutils + +For compiling and using the Intel® DPDK with gcc, it too must be installed +from the ports collection: + +gcc: version 4.8 is recommended + /usr/ports/lang/gcc48 + (Ensure that CPU_OPTS is selected (default is OFF)) + +When running the make config-recursive command, a dialog may be presented to the +user. For the installation of the Intel® DPDK, the default options were used. + +.. note:: + + To avoid multiple dialogs being presented to the user during make install, + it is advisable before running the make install command to re-run the + make config -recursive command until no more dialogs are seen. + + Install the Intel® DPDK and Browse Sources ------------------------------------------ @@ -68,7 +151,7 @@ Where: * EXECENV is: bsdapp -* TOOLCHAIN is: gcc +* TOOLCHAIN is: gcc | clang The configuration files for the Intel® DPDK targets can be found in the DPDK/config directory in the form of: @@ -85,26 +168,20 @@ directory in the form of: on which it is built. For more information on this setting, and its possible values, see the *Intel® DPDK Programmers Guide*. -To install and make the target, use gmake install T= CC=gcc48. +To install and make the target, use "gmake install T=". For example to compile for FreeBSD* use: .. code-block:: console - gmake install T=x86_64-native-bsdapp-gcc CC=gcc48 - -To prepare a target without building it, for example, if the configuration -changes need to be made before compilation, use the gmake config T= command: - -.. code-block:: console - - gmake config T=x86_64-native-bsdapp-gcc CC=gcc48 + gmake install T=x86_64-native-bsdapp-clang -To build after configuration, change directory to ./x86_64-native-bsdapp-gcc and use: - -.. code-block:: console +.. note:: - gmake CC=gcc48 + If the compiler binary to be used does not correspond to that given in the + TOOLCHAIN part of the target, the compiler command may need to be explicitly + specified. For example, if compiling for gcc, where the gcc binary is called + gcc4.8, the command would need to be "gmake install T= CC=gcc4.8". Browsing the Installed Intel® DPDK Environment Target ----------------------------------------------------- @@ -120,13 +197,47 @@ contains the kernel modules to install: user@host:~/DPDK # ls x86_64-native-bsdapp-gcc app build hostapp include kmod lib Makefile + +.. _loading_contigmem: + Loading the Intel® DPDK contigmem Module ---------------------------------------- -To run any Intel® DPDK application, the contigmem module must be loaded into the -running kernel. The module is found in the kmod sub-directory of the Intel® DPDK -target directory. The module can be loaded using kldload (assuming that the -current directory is the Intel® DPDK target directory): +To run an Intel® DPDK application, physically contiguous memory is required. +In the absence of non-transparent superpages, the included sources for the +contigmem kernel module provides the ability to present contiguous blocks of +memory for the Intel® DPDK to use. The contigmem module must be loaded into the +running kernel before any Intel® DPDK is run. The module is found in the kmod +sub-directory of the Intel® DPDK target directory. + +The amount of physically contiguous memory along with the number of physically +contiguous blocks to be reserved by the module can be set at runtime prior to +module loading using: + +.. code-block:: console + + root@host:~ # kenv hw.contigmem.num_buffers=n + root@host:~ # kenv hw.contigmem.buffer_size=m + +The kernel environment variables can also be specified during boot by placing the +following in /boot/loader.conf: + +:: + + hw.contigmem.num_buffers=n hw.contigmem.buffer_size=m + +The variables can be inspected using the following command: + +.. code-block:: console + + root@host:~ # sysctl -a hw.contigmem + +Where n is the number of blocks and m is the size in bytes of each area of +contiguous memory. A default of two buffers of size 1073741824 bytes (1 Gigabyte) +each is set during module load if they are not specified in the environment. + +The module can then be loaded using kldload (assuming that the current directory +is the Intel® DPDK target directory): .. code-block:: console @@ -147,8 +258,13 @@ directory and placing the following into /boot/loader.conf: hw.contigmem.num_buffers and hw.contigmem.buffer_size if the default values are not to be used. -An error such as kldload: can't load ./x86_64-native-bsdapp-gcc/kmod/contigmem.ko: -Exec format error, is generally attributed to not having enough contiguous memory +An error such as: + +.. code-block:: console + + kldload: can't load ./x86_64-native-bsdapp-gcc/kmod/contigmem.ko: Exec format error + +is generally attributed to not having enough contiguous memory available and can be verified via dmesg or /var/log/messages: .. code-block:: console @@ -157,6 +273,8 @@ available and can be verified via dmesg or /var/log/messages: To avoid this error, reduce the number of buffers or the buffer size. +.. _loading_nic_uio: + Loading the Intel® DPDK nic_uio Module -------------------------------------- @@ -171,15 +289,15 @@ directory is the Intel® DPDK target directory). .. note:: - Currently loaded modules can be seen by using the kldstat command. A module - can be removed from the running kernel by using kldunload . - While the nic_uio module can be loaded during boot, the module load order - cannot be guaranteed and in the case where only some ports are bound to - nic_uio and others remain in use by the original driver, it is necessary to - load nic_uio after booting into the kernel, specifically after the original - driver has been loaded. + If the ports to be used are currently bound to a existing kernel driver + then the hw.nic_uio.bdfs sysctl value will need to be set before loading the + module. Setting this value is described in the next section below. + +Currently loaded modules can be seen by using the "kldstat" command and a module +can be removed from the running kernel by using "kldunload ". -To load the module during boot, copy the nic_uio module to /boot/kernel and place the following into /boot/loader.conf: +To load the module during boot, copy the nic_uio module to /boot/kernel +and place the following into /boot/loader.conf: :: @@ -189,15 +307,21 @@ To load the module during boot, copy the nic_uio module to /boot/kernel and plac nic_uio_load="YES" must appear after the contigmem_load directive, if it exists. -Binding Network Ports to the nic_uio Module -------------------------------------------- - By default, the nic_uio module will take ownership of network ports if they are -recognized Intel® DPDK devices and are not owned by another module. +recognized Intel® DPDK devices and are not owned by another module. However, since +the FreeBSD kernel includes support, either built-in, or via a separate driver +module, for most network card devices, it is likely that the ports to be used are +already bound to a driver other than nic_uio. The following sub-section describe +how to query and modify the device ownership of the ports to be used by +Intel® DPDK applications. + +.. _binding_network_ports: -Device ownership can be viewed using the pciconf -l command. +Binding Network Ports to the nic_uio Module +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -The example below shows four Intel® 82599 network ports under if_ixgbe module ownership. +Device ownership can be viewed using the pciconf -l command. The example below shows +four Intel® 82599 network ports under "if_ixgbe" module ownership. .. code-block:: console @@ -232,7 +356,7 @@ kernel environment variable prior to loading nic_uio, as follows: Where a comma separated list of selectors is set, the list must not contain any whitespace. -For example to re-bind ix2@pci0:2:0:0 and ix3@pci0:2:0: to the nic_uio module +For example to re-bind "ix2\@pci0:2:0:0" and "ix3\@pci0:2:0:1" to the nic_uio module upon loading, use the following command: .. code-block:: console @@ -240,52 +364,39 @@ upon loading, use the following command: kenv hw.nic_uio.bdfs="2:0:0,2:0:1" The variable can also be specified during boot by placing the following into -/boot/loader.conf: +"/boot/loader.conf", before the previously-described "nic_uio_load" line - as +shown. :: hw.nic_uio.bdfs="2:0:0,2:0:1" + nic_uio_load="YES" -To restore the original device binding, it is necessary to reboot FreeBSD* if the -original driver has been compiled into the kernel. - -For example to rebind some or all ports to the original driver: - -Update or remove the hw.nic_uio.bdfs entry in /boot/loader.conf if specified there -for persistency, then; - -.. code-block:: console +Binding Network Ports Back to their Original Kernel Driver +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - reboot +If the original driver for a network port has been compiled into the kernel, +it is necessary to reboot FreeBSD* to restore the original device binding. Before +doing so, update or remove the "hw.nic_uio.bdfs" in "/boot/loader.conf". If rebinding to a driver that is a loadable module, the network port binding can -be reset without rebooting. This requires the unloading of the nic_uio module -and the original driver. +be reset without rebooting. To do so, unload both the target kernel module and the +nic_uio module, modify or clear the "hw.nic_uio.bdfs" kernel environment (kenv) +value, and reload the two drivers - first the original kernel driver, and then +the nic_uio driver. [The latter does not need to be reloaded unless there are +ports that are still to be bound to it]. -Update or remove the hw.nic_uio.bdfs entry from /boot/loader.conf if specified -there for persistency. +Example commands to perform these steps are shown below: .. code-block:: console kldunload nic_uio + kldunload -kldunload - -.. code-block:: console - - kenv -u hw.nic_uio.bdfs - -to remove all network ports from nic_uio and undefined this system variable OR + kenv -u hw.nic_uio.bdfs # to clear the value completely -.. code-block:: console - - kenv hw.nic_uio.bdfs="b:d:f,b:d:f,..." - -(to update nic_uio ports) - -.. code-block:: console + kenv hw.nic_uio.bdfs="b:d:f,b:d:f,..." # to update the list of ports to bind kldload - kldload nic_uio -(if updating the list of associated network ports) + kldload nic_uio # optional diff --git a/doc/guides/freebsd_gsg/build_sample_apps.rst b/doc/guides/freebsd_gsg/build_sample_apps.rst index 3b2d0c1460..dd8c974a49 100644 --- a/doc/guides/freebsd_gsg/build_sample_apps.rst +++ b/doc/guides/freebsd_gsg/build_sample_apps.rst @@ -28,6 +28,8 @@ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +.. _compiling_sample_apps: + Compiling and Running Sample Applications ========================================= @@ -38,7 +40,7 @@ Compiling a Sample Application ------------------------------ Once an Intel® DPDK target environment directory has been created (such as -x86_64-native-bsdapp-gcc), it contains all libraries and header files required +x86_64-native-bsdapp-clang), it contains all libraries and header files required to build an application. When compiling an application in the FreeBSD* environment on the Intel® DPDK, @@ -47,10 +49,13 @@ the following variables must be exported: * RTE_SDK - Points to the Intel® DPDK installation directory. * RTE_TARGET - Points to the Intel® DPDK target environment directory. - For FreeBSD*, this is the x86_64-native-bsdapp-gcc directory. + For FreeBSD*, this is the x86_64-native-bsdapp-clang or + x86_64-native-bsdapp-gcc directory. The following is an example of creating the helloworld application, which runs -in the Intel® DPDK FreeBSD* environment. This example may be found in the +in the Intel® DPDK FreeBSD* environment. While the example demonstrates compiling +using gcc version 4.8, compiling with clang will be similar, except that the "CC=" +parameter can probably be omitted. The "helloworld" example may be found in the ${RTE_SDK}/examples directory. The directory contains the main.c file. This file, when combined with the @@ -92,13 +97,15 @@ in the build directory. INSTALL-APP helloworld INSTALL-MAP helloworld.map +.. _running_sample_app: + Running a Sample Application ---------------------------- #. The contigmem and nic_uio modules must be set up prior to running an application. #. Any ports to be used by the application must be already bound to the nic_uio module, - as described in section Section 3.6, “ , ” prior to running the application. + as described in section :ref:`binding_network_ports`, prior to running the application. The application is linked with the Intel® DPDK target environment's Environment Abstraction Layer (EAL) library, which provides some options that are generic to every Intel® DPDK application. @@ -107,14 +114,13 @@ The following is the list of options that can be given to the EAL: .. code-block:: console - ./rte-app -c COREMASK -n NUM [-b ] [-m MB] [-r NUM] [-v] [--file-prefix] [--proc-type ] + ./rte-app -c COREMASK -n NUM [-b ] [-r NUM] [-v] [--proc-type ] .. note:: EAL has a common interface between all operating systems and is based on the - Linux* notation for PCI devices. The device and function separator used is - a ":" rather than "." as seen with pciconf on FreeBSD*. For example, a - FreeBSD* device selector of pci0:2:0:1 is referred to as 02:00.1 in EAL. + Linux* notation for PCI devices. For example, a FreeBSD* device selector of + pci0:2:0:1 is referred to as 02:00.1 in EAL. The EAL options for FreeBSD* are as follows: @@ -174,6 +180,8 @@ are present and are to be used for running the application): in the *Intel® DPDK Sample Applications User Guide and the Intel® DPDK Programmers Guide* for more details. +.. _running_non_root: + Running Intel®DPDK Applications Without Root Privileges ------------------------------------------------------- diff --git a/doc/guides/freebsd_gsg/index.rst b/doc/guides/freebsd_gsg/index.rst index 90915a8610..f84c2f84c3 100644 --- a/doc/guides/freebsd_gsg/index.rst +++ b/doc/guides/freebsd_gsg/index.rst @@ -78,6 +78,6 @@ Copyright © 2014, Intel Corporation. All rights reserved. :numbered: intro - sys_reqs + install_from_ports build_dpdk build_sample_apps diff --git a/doc/guides/freebsd_gsg/install_from_ports.rst b/doc/guides/freebsd_gsg/install_from_ports.rst new file mode 100644 index 0000000000..c946c33c25 --- /dev/null +++ b/doc/guides/freebsd_gsg/install_from_ports.rst @@ -0,0 +1,162 @@ +.. BSD LICENSE + Copyright(c) 2010-2014 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +.. _install_from_ports: + +Installing Intel® DPDK from the Ports Collection +================================================ + +The easiest way to get up and running with the Intel® DPDK on FreeBSD is to +install it from the ports collection. Details of getting and using the ports +collection are documented in the FreeBSD Handbook at: + + https://www.freebsd.org/doc/handbook/ports-using.html + +.. note:: + + Testing has been performed using FreeBSD* 10.0-RELEASE (x86_64) and requires the + installation of the kernel sources, which should be included during the + installation of FreeBSD*. + +Installing the Intel® DPDK FreeBSD Port +--------------------------------------- + +On a system with the ports collection installed in /usr/ports, the Intel® DPDK +can be installed using the commands: + +.. code-block:: console + + root@host:~ # cd /usr/ports/net/dpdk + + root@host:~ # make install + +After the installation of the Intel® DPDK port, instructions will be printed on +how to install the kernel modules required to use the Intel® DPDK. A more +complete version of these instructions can be found in the sections +:ref:`loading_contigmem` and :ref:`loading_nic_uio`. Normally, lines like +those below would be added to the file "/boot/loader.conf". + +.. code-block:: console + + # reserve 2 x 1G blocks of contiguous memory using contigmem driver + hw.contigmem.num_buffers=2 + hw.contigmem.buffer_size=1073741824 + contigmem_load="YES" + # identify NIC devices for Intel® DPDK apps to use and load nic_uio driver + hw.nic_uio.bdfs="2:0:0,2:0:1" + nic_uio_load="YES" + +Compiling and Running the Example Applications +---------------------------------------------- + +When the Intel® DPDK has been installed from the ports collection it installs +its example applications in "/usr/local/share/dpdk/examples" - also accessible via +symlink as "/usr/local/share/examples/dpdk". These examples can be compiled and +run as described in :ref:`compiling_sample_apps`. In this case, the required +environmental variables should be set as below: + +* RTE_SDK=/usr/local/share/dpdk + +* RTE_TARGET=x86_64-native-bsdapp-clang + +.. note:: + + To install a copy of the Intel® DPDK compiled using gcc, please download the + official Intel® DPDK package from http://dpdk.org/ and install manually using + the instructions given in the next chapter, :ref:`building_from_source` + +An example application can therefore be copied to a user's home directory and +compiled and run as below: + +.. code-block:: console + + user@host:~$ export RTE_SDK=/usr/local/share/dpdk + + user@host:~$ export RTE_TARGET=x86_64-native-bsdapp-clang + + user@host:~$ cp -r /usr/local/share/dpdk/examples/helloworld . + + user@host:~$ cd helloworld/ + + user@host:~/helloworld$ gmake + CC main.o + LD helloworld + INSTALL-APP helloworld + INSTALL-MAP helloworld.map + + user@host:~/helloworld$ sudo ./build/helloworld -c F -n 2 + EAL: Contigmem driver has 2 buffers, each of size 1GB + EAL: Sysctl reports 8 cpus + EAL: Detected lcore 0 + EAL: Detected lcore 1 + EAL: Detected lcore 2 + EAL: Detected lcore 3 + EAL: Support maximum 64 logical core(s) by configuration. + EAL: Detected 4 lcore(s) + EAL: Setting up physically contiguous memory... + EAL: Mapped memory segment 1 @ 0x802400000: physaddr:0x40000000, len 1073741824 + EAL: Mapped memory segment 2 @ 0x842400000: physaddr:0x100000000, len 1073741824 + EAL: WARNING: clock_gettime cannot use CLOCK_MONOTONIC_RAW and HPET is not available - clock timings may be less accurate. + EAL: TSC frequency is ~3569023 KHz + EAL: PCI scan found 24 devices + EAL: Master core 0 is ready (tid=0x802006400) + EAL: Core 1 is ready (tid=0x802006800) + EAL: Core 3 is ready (tid=0x802007000) + EAL: Core 2 is ready (tid=0x802006c00) + EAL: PCI device 0000:01:00.0 on NUMA socket 0 + EAL: probe driver: 8086:10fb rte_ixgbe_pmd + EAL: PCI memory mapped at 0x80074a000 + EAL: PCI memory mapped at 0x8007ca000 + EAL: PCI device 0000:01:00.1 on NUMA socket 0 + EAL: probe driver: 8086:10fb rte_ixgbe_pmd + EAL: PCI memory mapped at 0x8007ce000 + EAL: PCI memory mapped at 0x80084e000 + EAL: PCI device 0000:02:00.0 on NUMA socket 0 + EAL: probe driver: 8086:10fb rte_ixgbe_pmd + EAL: PCI memory mapped at 0x800852000 + EAL: PCI memory mapped at 0x8008d2000 + EAL: PCI device 0000:02:00.1 on NUMA socket 0 + EAL: probe driver: 8086:10fb rte_ixgbe_pmd + EAL: PCI memory mapped at 0x801b3f000 + EAL: PCI memory mapped at 0x8008d6000 + hello from core 1 + hello from core 2 + hello from core 3 + hello from core 0 + +.. note:: + + To run an Intel® DPDK process as a non-root user, adjust the permissions on + the /dev/contigmem and /dev/uio device nodes as described in section + :ref:`running_non_root` + +.. note:: + For an explanation of the command-line parameters that can be passed to an + Intel® DPDK application, see section :ref:`running_sample_app`. diff --git a/doc/guides/freebsd_gsg/intro.rst b/doc/guides/freebsd_gsg/intro.rst index fc27ed01aa..59c17cffbb 100644 --- a/doc/guides/freebsd_gsg/intro.rst +++ b/doc/guides/freebsd_gsg/intro.rst @@ -33,7 +33,7 @@ Introduction This document contains instructions for installing and configuring the Intel® Data Plane Development Kit(Intel® DPDK) software. It is designed to get customers -up and running quickly. The document describes how to compile and run an Intel® +up and running quickly and describes how to compile and run an Intel® DPDK application in a FreeBSD* application (bsdapp) environment, without going deeply into detail. @@ -42,8 +42,15 @@ handbook is available from the FreeBSD* Documentation Project: `http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html `_ -DocumentationRoadmap --------------------- +.. note:: + + The Intel® DPDK is now available as part of the FreeBSD ports collection. + Installing via the ports collection infrastructure is now the recommended + way to install the Intel® DPDK on FreeBSD, and is documented in the + next chapter, :ref:`install_from_ports`. + +Documentation Roadmap +--------------------- The following is a list of Intel® DPDK documents in the suggested reading order: diff --git a/doc/guides/freebsd_gsg/sys_reqs.rst b/doc/guides/freebsd_gsg/sys_reqs.rst deleted file mode 100644 index 8ce0ba48c5..0000000000 --- a/doc/guides/freebsd_gsg/sys_reqs.rst +++ /dev/null @@ -1,164 +0,0 @@ -.. BSD LICENSE - Copyright(c) 2010-2014 Intel Corporation. All rights reserved. - All rights reserved. - - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - * Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in - the documentation and/or other materials provided with the - distribution. - * Neither the name of Intel Corporation nor the names of its - contributors may be used to endorse or promote products derived - from this software without specific prior written permission. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -System Requirements -=================== - -This chapter describes the packages required to compile the Intel® DPDK. - -Compilationofthe Intel® DPDK ----------------------------- - -.. note:: - - The Intel® DPDK and its applications requires the GNU make system (gmake) - and the GNU Compiler Collection (gcc) to build on FreeBSD*. The - installation of these tools is covered in this section. - -**Required Tools:** - -.. note:: - - Testing has been performed using FreeBSD* 9.2-RELEASE (x86_64), FreeBSD* - 10.0-RELEASE (x86_64) and requires the installation of the kernel sources, - which should be included during the installation of FreeBSD*. The Intel® - DPDK also requires the use of FreeBSD* ports to compile and function. - -To use the FreeBSD* ports system, it is required to update and extract the FreeBSD* -ports tree by issuing the following commands: - -.. code-block:: console - - root@host:~ # portsnap fetch - root@host:~ # portsnap extract - -If the environment requires proxies for external communication, these can be set -using: - -.. code-block:: console - - root@host:~ # setenv http_proxy : - root@host:~ # setenv ftp_proxy : - -The FreeBSD* ports below need to be installed prior to building the Intel® DPDK. -In general these can be installed using the following set of commands: - -#. cd /usr/ports/ - -#. make config-recursive - -#. make install - -#. make clean - -Each port location can be found using: - -.. code-block:: console - - user@host:~ # whereis - -The ports required and their locations are as follows: - -* dialog4ports - -* /usr/ports/ports-mgmt/dialog4ports - -* gcc: version 4.8 is recommended - -* /usr/ports/lang/gcc48 - -* Ensure that CPU_OPTS is selected (default is OFF) - -* GNU make(gmake) - -* Installed automatically with gcc48 - -* coreutils - -* /usr/ports/sysutils/coreutils - -* libexecinfo (Not required for FreeBSD* 10) - -* /usr/src/contrib/libexecinfo - -When running the make config-recursive command, a dialog may be presented to the -user. For the installation of the Intel® DPDK, the default options were used. - -.. note:: - - To avoid multiple dialogs being presented to the user during make install, - it is advisable before running the make install command to re-run the - make config -recursive command until no more dialogs are seen. - -Running Intel® DPDK Applications --------------------------------- - -To run an Intel® DPDK application, physically contiguous memory is required. -In the absence of non-transparent superpages, the included sources for the -contigmem kernel module provides the ability to present contiguous blocks of -memory for the Intel® DPDK to use. Section 3.4, “Loading the Intel® DPDK -Contigmem Module” on page 8 for details on the loading of this module. - -Using Intel® DPDK Contigmem Module -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -The amount of physically contiguous memory along with the number of physically -contiguous blocks can be set at runtime and prior to module loading using: - -.. code-block:: console - - root@host:~ # kenv hw.contigmem.num_buffers=n - root@host:~ # kenv hw.contigmem.buffer_size=m - -The kernel environment variables can also be specified during boot by placing the -following in /boot/loader.conf: - -:: - - hw.contigmem.num_buffers=n hw.contigmem.buffer_size=m - -The variables can be inspected using the following command: - -.. code-block:: console - - root@host:~ # sysctl -a hw.contigmem - -Where n is the number of blocks and m is the size in bytes of each area of -contiguous memory. A default of two buffers of size 1073741824 bytes (1 Gigabyte) -each is set during module load if they are not specified in the environment. - -.. note:: - - The /boot/loader.conf file may not exist, but can be created as a root user - and should be given permissions as follows: - -.. code-block:: console - - root@host:~ # chmod 644 /boot/loader.conf