From: Yuval Caduri <cyuval@marvell.com>
Date: Tue, 25 Sep 2018 07:05:03 +0000 (+0200)
Subject: net/mvpp2: detach Tx QoS from Rx cls/QoS config
X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=406aeb15240179e6faf53b22917252ec2b17695b;p=dpdk.git

net/mvpp2: detach Tx QoS from Rx cls/QoS config

Functional change:
Open receive cls/qos related features, only if the
config file contains an rx_related configuration entry.
This allows to configure tx_related entries, w/o unintentionally
opening rx cls/qos.

Code:
'use_global_defaults' is by default set to '1'.
Only if an rx_related entry was configured, it is updated to '0'.
rx cls/qos is performed only if 'use_global_defaults' is '0'.
Default TC configuration is now only mandatory when
'use_global_defaults' is '0'.

Signed-off-by: Yuval Caduri <cyuval@marvell.com>
Reviewed-by: Natalie Samsonov <nsamsono@marvell.com>
Tested-by: Natalie Samsonov <nsamsono@marvell.com>
---

diff --git a/drivers/net/mvpp2/mrvl_ethdev.c b/drivers/net/mvpp2/mrvl_ethdev.c
index 4d1e84a04b..64c6f0fe2d 100644
--- a/drivers/net/mvpp2/mrvl_ethdev.c
+++ b/drivers/net/mvpp2/mrvl_ethdev.c
@@ -593,7 +593,8 @@ mrvl_dev_start(struct rte_eth_dev *dev)
 	}
 
 	/* For default QoS config, don't start classifier. */
-	if (mrvl_qos_cfg) {
+	if (mrvl_qos_cfg  &&
+	    mrvl_qos_cfg->port[dev->data->port_id].use_global_defaults == 0) {
 		ret = mrvl_start_qos_mapping(priv);
 		if (ret) {
 			MRVL_LOG(ERR, "Failed to setup QoS mapping");
diff --git a/drivers/net/mvpp2/mrvl_qos.c b/drivers/net/mvpp2/mrvl_qos.c
index e039635ed4..5d80c3e84b 100644
--- a/drivers/net/mvpp2/mrvl_qos.c
+++ b/drivers/net/mvpp2/mrvl_qos.c
@@ -324,6 +324,7 @@ parse_tc_cfg(struct rte_cfgfile *file, int port, int tc,
 	if (rte_cfgfile_num_sections(file, sec_name, strlen(sec_name)) <= 0)
 		return 0;
 
+	cfg->port[port].use_global_defaults = 0;
 	entry = rte_cfgfile_get_entry(file, sec_name, MRVL_TOK_RXQ);
 	if (entry) {
 		n = get_entry_values(entry,
@@ -421,7 +422,7 @@ parse_policer(struct rte_cfgfile *file, int port, const char *sec_name,
 			cfg->port[port].policer_params.token_unit =
 				PP2_CLS_PLCR_PACKETS_TOKEN_UNIT;
 		} else {
-			RTE_LOG(ERR, PMD, "Unknown token: %s\n", entry);
+			MRVL_LOG(ERR, "Unknown token: %s", entry);
 			return -1;
 		}
 	}
@@ -438,7 +439,7 @@ parse_policer(struct rte_cfgfile *file, int port, const char *sec_name,
 			cfg->port[port].policer_params.color_mode =
 				PP2_CLS_PLCR_COLOR_AWARE_MODE;
 		} else {
-			RTE_LOG(ERR, PMD, "Error in parsing: %s\n", entry);
+			MRVL_LOG(ERR, "Error in parsing: %s", entry);
 			return -1;
 		}
 	}
@@ -518,28 +519,15 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path,
 		snprintf(sec_name, sizeof(sec_name), "%s %d %s",
 			MRVL_TOK_PORT, n, MRVL_TOK_DEFAULT);
 
+		/* Use global defaults, unless an override occurs */
+		(*cfg)->port[n].use_global_defaults = 1;
+
 		/* Skip ports non-existing in configuration. */
 		if (rte_cfgfile_num_sections(file, sec_name,
 				strlen(sec_name)) <= 0) {
-			(*cfg)->port[n].use_global_defaults = 1;
-			(*cfg)->port[n].mapping_priority =
-				PP2_CLS_QOS_TBL_VLAN_IP_PRI;
 			continue;
 		}
 
-		entry = rte_cfgfile_get_entry(file, sec_name,
-				MRVL_TOK_DEFAULT_TC);
-		if (entry) {
-			if (get_val_securely(entry, &val) < 0 ||
-				val > USHRT_MAX)
-				return -1;
-			(*cfg)->port[n].default_tc = (uint8_t)val;
-		} else {
-			MRVL_LOG(ERR,
-				"Default Traffic Class required in custom configuration!");
-			return -1;
-		}
-
 		/*
 		 * Read per-port rate limiting. Setting that will
 		 * disable per-queue rate limiting.
@@ -573,6 +561,7 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path,
 		entry = rte_cfgfile_get_entry(file, sec_name,
 				MRVL_TOK_MAPPING_PRIORITY);
 		if (entry) {
+			(*cfg)->port[n].use_global_defaults = 0;
 			if (!strncmp(entry, MRVL_TOK_VLAN_IP,
 				sizeof(MRVL_TOK_VLAN_IP)))
 				(*cfg)->port[n].mapping_priority =
@@ -602,6 +591,7 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path,
 		entry = rte_cfgfile_get_entry(file, sec_name,
 				MRVL_TOK_PLCR_DEFAULT);
 		if (entry) {
+			(*cfg)->port[n].use_global_defaults = 0;
 			if (get_val_securely(entry, &val) < 0)
 				return -1;
 
@@ -627,6 +617,21 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path,
 					"Error %d parsing port %d tc %d!\n",
 					ret, n, i);
 		}
+
+		entry = rte_cfgfile_get_entry(file, sec_name,
+					      MRVL_TOK_DEFAULT_TC);
+		if (entry) {
+			if (get_val_securely(entry, &val) < 0 ||
+			    val > USHRT_MAX)
+				return -1;
+			(*cfg)->port[n].default_tc = (uint8_t)val;
+		} else {
+			if ((*cfg)->port[n].use_global_defaults == 0) {
+				MRVL_LOG(ERR,
+					 "Default Traffic Class required in custom configuration!");
+				return -1;
+			}
+		}
 	}
 
 	return 0;