From: Zijie Pan Date: Wed, 25 Apr 2018 14:02:05 +0000 (+0200) Subject: net/e1000: add module EEPROM callbacks for e1000 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=40ff8b305ab8;p=dpdk.git net/e1000: add module EEPROM callbacks for e1000 Add new callbacks for eth_dev_ops of e1000 to get the information and data of plugin module EEPROM. Signed-off-by: Zijie Pan Reviewed-by: Ferruh Yigit Acked-by: Remy Horton --- diff --git a/doc/guides/nics/features/igb.ini b/doc/guides/nics/features/igb.ini index 33d64d99e4..c53fd0757e 100644 --- a/doc/guides/nics/features/igb.ini +++ b/doc/guides/nics/features/igb.ini @@ -41,6 +41,7 @@ Basic stats = Y Extended stats = Y FW version = Y EEPROM dump = Y +Module EEPROM dump = Y Registers dump = Y BSD nic_uio = Y Linux UIO = Y diff --git a/drivers/net/e1000/base/e1000_phy.h b/drivers/net/e1000/base/e1000_phy.h index 3e45a9ef41..2cd0e14b32 100644 --- a/drivers/net/e1000/base/e1000_phy.h +++ b/drivers/net/e1000/base/e1000_phy.h @@ -330,4 +330,12 @@ struct sfp_e1000_flags { #define E1000_SFF_VENDOR_OUI_AVAGO 0x00176A00 #define E1000_SFF_VENDOR_OUI_INTEL 0x001B2100 +/* EEPROM byte offsets */ +#define IGB_SFF_8472_SWAP 0x5C +#define IGB_SFF_8472_COMP 0x5E + +/* Bitmasks */ +#define IGB_SFF_ADDRESSING_MODE 0x4 +#define IGB_SFF_8472_UNSUP 0x00 + #endif diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c index 9b808a982a..c35c9352af 100644 --- a/drivers/net/e1000/igb_ethdev.c +++ b/drivers/net/e1000/igb_ethdev.c @@ -223,6 +223,10 @@ static int eth_igb_get_eeprom(struct rte_eth_dev *dev, struct rte_dev_eeprom_info *eeprom); static int eth_igb_set_eeprom(struct rte_eth_dev *dev, struct rte_dev_eeprom_info *eeprom); +static int eth_igb_get_module_info(struct rte_eth_dev *dev, + struct rte_eth_dev_module_info *modinfo); +static int eth_igb_get_module_eeprom(struct rte_eth_dev *dev, + struct rte_dev_eeprom_info *info); static int eth_igb_set_mc_addr_list(struct rte_eth_dev *dev, struct ether_addr *mc_addr_set, uint32_t nb_mc_addr); @@ -402,6 +406,8 @@ static const struct eth_dev_ops eth_igb_ops = { .get_eeprom_length = eth_igb_get_eeprom_length, .get_eeprom = eth_igb_get_eeprom, .set_eeprom = eth_igb_set_eeprom, + .get_module_info = eth_igb_get_module_info, + .get_module_eeprom = eth_igb_get_module_eeprom, .timesync_adjust_time = igb_timesync_adjust_time, .timesync_read_time = igb_timesync_read_time, .timesync_write_time = igb_timesync_write_time, @@ -5328,6 +5334,86 @@ eth_igb_set_eeprom(struct rte_eth_dev *dev, return nvm->ops.write(hw, first, length, data); } +static int +eth_igb_get_module_info(struct rte_eth_dev *dev, + struct rte_eth_dev_module_info *modinfo) +{ + struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private); + + uint32_t status = 0; + uint16_t sff8472_rev, addr_mode; + bool page_swap = false; + + if (hw->phy.media_type == e1000_media_type_copper || + hw->phy.media_type == e1000_media_type_unknown) + return -EOPNOTSUPP; + + /* Check whether we support SFF-8472 or not */ + status = e1000_read_phy_reg_i2c(hw, IGB_SFF_8472_COMP, &sff8472_rev); + if (status) + return -EIO; + + /* addressing mode is not supported */ + status = e1000_read_phy_reg_i2c(hw, IGB_SFF_8472_SWAP, &addr_mode); + if (status) + return -EIO; + + /* addressing mode is not supported */ + if ((addr_mode & 0xFF) & IGB_SFF_ADDRESSING_MODE) { + PMD_DRV_LOG(ERR, + "Address change required to access page 0xA2, " + "but not supported. Please report the module " + "type to the driver maintainers.\n"); + page_swap = true; + } + + if ((sff8472_rev & 0xFF) == IGB_SFF_8472_UNSUP || page_swap) { + /* We have an SFP, but it does not support SFF-8472 */ + modinfo->type = RTE_ETH_MODULE_SFF_8079; + modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8079_LEN; + } else { + /* We have an SFP which supports a revision of SFF-8472 */ + modinfo->type = RTE_ETH_MODULE_SFF_8472; + modinfo->eeprom_len = RTE_ETH_MODULE_SFF_8472_LEN; + } + + return 0; +} + +static int +eth_igb_get_module_eeprom(struct rte_eth_dev *dev, + struct rte_dev_eeprom_info *info) +{ + struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private); + + uint32_t status = 0; + uint16_t dataword[RTE_ETH_MODULE_SFF_8472_LEN / 2 + 1]; + u16 first_word, last_word; + int i = 0; + + if (info->length == 0) + return -EINVAL; + + first_word = info->offset >> 1; + last_word = (info->offset + info->length - 1) >> 1; + + /* Read EEPROM block, SFF-8079/SFF-8472, word at a time */ + for (i = 0; i < last_word - first_word + 1; i++) { + status = e1000_read_phy_reg_i2c(hw, (first_word + i) * 2, + &dataword[i]); + if (status) { + /* Error occurred while reading module */ + return -EIO; + } + + dataword[i] = rte_be_to_cpu_16(dataword[i]); + } + + memcpy(info->data, (u8 *)dataword + (info->offset & 1), info->length); + + return 0; +} + static int eth_igb_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id) {