From: Moti Haimovsky Date: Thu, 12 Oct 2017 12:30:00 +0000 (+0200) Subject: net/mlx4: add loopback Tx from VF X-Git-Tag: spdx-start~1338 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=43d77c2295719bad579ca0faf8d6ff39db1dfc67;p=dpdk.git net/mlx4: add loopback Tx from VF This patch adds loopback functionality used when the chip is a VF in order to enable packet transmission between VFs and PF. Signed-off-by: Moti Haimovsky Acked-by: Adrien Mazarguil --- diff --git a/drivers/net/mlx4/mlx4_rxtx.c b/drivers/net/mlx4/mlx4_rxtx.c index 87c52615be..36173ad06f 100644 --- a/drivers/net/mlx4/mlx4_rxtx.c +++ b/drivers/net/mlx4/mlx4_rxtx.c @@ -311,10 +311,13 @@ mlx4_post_send(struct txq *txq, struct rte_mbuf *pkt) struct mlx4_wqe_data_seg *dseg; struct mlx4_sq *sq = &txq->msq; struct rte_mbuf *buf; + union { + uint32_t flags; + uint16_t flags16[2]; + } srcrb; uint32_t head_idx = sq->head & sq->txbb_cnt_mask; uint32_t lkey; uintptr_t addr; - uint32_t srcrb_flags; uint32_t owner_opcode = MLX4_OPCODE_SEND; uint32_t byte_count; int wqe_real_size; @@ -413,12 +416,6 @@ mlx4_post_send(struct txq *txq, struct rte_mbuf *pkt) } /* Fill the control parameters for this packet. */ ctrl->fence_size = (wqe_real_size >> 4) & 0x3f; - /* - * The caller should prepare "imm" in advance in order to support - * VF to VF communication (when the device is a virtual-function - * device (VF)). - */ - ctrl->imm = 0; /* * For raw Ethernet, the SOLICIT flag is used to indicate that no ICRC * should be calculated. @@ -426,10 +423,10 @@ mlx4_post_send(struct txq *txq, struct rte_mbuf *pkt) txq->elts_comp_cd -= nr_txbbs; if (unlikely(txq->elts_comp_cd <= 0)) { txq->elts_comp_cd = txq->elts_comp_cd_init; - srcrb_flags = RTE_BE32(MLX4_WQE_CTRL_SOLICIT | + srcrb.flags = RTE_BE32(MLX4_WQE_CTRL_SOLICIT | MLX4_WQE_CTRL_CQ_UPDATE); } else { - srcrb_flags = RTE_BE32(MLX4_WQE_CTRL_SOLICIT); + srcrb.flags = RTE_BE32(MLX4_WQE_CTRL_SOLICIT); } /* Enable HW checksum offload if requested */ if (txq->csum && @@ -443,14 +440,26 @@ mlx4_post_send(struct txq *txq, struct rte_mbuf *pkt) owner_opcode |= MLX4_WQE_CTRL_IIP_HDR_CSUM | MLX4_WQE_CTRL_IL4_HDR_CSUM; if (pkt->ol_flags & PKT_TX_OUTER_IP_CKSUM) - srcrb_flags |= + srcrb.flags |= RTE_BE32(MLX4_WQE_CTRL_IP_HDR_CSUM); } else { - srcrb_flags |= RTE_BE32(MLX4_WQE_CTRL_IP_HDR_CSUM | + srcrb.flags |= RTE_BE32(MLX4_WQE_CTRL_IP_HDR_CSUM | MLX4_WQE_CTRL_TCP_UDP_CSUM); } } - ctrl->srcrb_flags = srcrb_flags; + if (txq->lb) { + /* + * Copy destination MAC address to the WQE, this allows + * loopback in eSwitch, so that VFs and PF can communicate + * with each other. + */ + srcrb.flags16[0] = *(rte_pktmbuf_mtod(pkt, uint16_t *)); + ctrl->imm = *(rte_pktmbuf_mtod_offset(pkt, uint32_t *, + sizeof(uint16_t))); + } else { + ctrl->imm = 0; + } + ctrl->srcrb_flags = srcrb.flags; /* * Make sure descriptor is fully written before * setting ownership bit (because HW can start diff --git a/drivers/net/mlx4/mlx4_rxtx.h b/drivers/net/mlx4/mlx4_rxtx.h index 51af69c035..e10bbca427 100644 --- a/drivers/net/mlx4/mlx4_rxtx.h +++ b/drivers/net/mlx4/mlx4_rxtx.h @@ -128,6 +128,7 @@ struct txq { uint32_t max_inline; /**< Max inline send size. */ uint32_t csum:1; /**< Enable checksum offloading. */ uint32_t csum_l2tun:1; /**< Same for L2 tunnels. */ + uint32_t lb:1; /**< Whether packets should be looped back by eSwitch. */ uint8_t *bounce_buf; /**< Memory used for storing the first DWORD of data TXBBs. */ struct { diff --git a/drivers/net/mlx4/mlx4_txq.c b/drivers/net/mlx4/mlx4_txq.c index 0e27df2c92..6d3dd78227 100644 --- a/drivers/net/mlx4/mlx4_txq.c +++ b/drivers/net/mlx4/mlx4_txq.c @@ -278,6 +278,8 @@ mlx4_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc, RTE_MIN(MLX4_PMD_TX_PER_COMP_REQ, desc / 4), .csum = priv->hw_csum, .csum_l2tun = priv->hw_csum_l2tun, + /* Enable Tx loopback for VF devices. */ + .lb = !!priv->vf, .bounce_buf = bounce_buf, }; txq->cq = ibv_create_cq(priv->ctx, desc, NULL, NULL, 0);