From: Bruce Richardson Date: Fri, 5 Dec 2014 13:46:22 +0000 (+0000) Subject: ixgbe: fix multi-process support X-Git-Tag: spdx-start~9937 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=46bc9d7513d16b882a95d7db4cede47522deccfc;p=dpdk.git ixgbe: fix multi-process support When using multiple processes, the TX function used in all processes should be the same, otherwise the secondary processes cannot transmit more than tx-ring-size - 1 packets. To achieve this, we extract out the code to select the ixgbe TX function to be used into a separate function inside the ixgbe driver, and call that from a secondary process when it is attaching to an already-configured NIC. Testing with symmetric MP app shows that we are able to RX and TX from both primary and secondary processes once this patch is applied. Signed-off-by: Bruce Richardson Acked-by: Reshma Pattan --- diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c index 937fc3c4e4..94019163fa 100644 --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c @@ -68,6 +68,7 @@ #include "ixgbe/ixgbe_common.h" #include "ixgbe_ethdev.h" #include "ixgbe_bypass.h" +#include "ixgbe_rxtx.h" /* * High threshold controlling when to start sending XOFF frames. Must be at @@ -741,10 +742,17 @@ eth_ixgbe_dev_init(__attribute__((unused)) struct eth_driver *eth_drv, eth_dev->rx_pkt_burst = &ixgbe_recv_pkts; eth_dev->tx_pkt_burst = &ixgbe_xmit_pkts; - /* for secondary processes, we don't initialise any further as primary + /* + * For secondary processes, we don't initialise any further as primary * has already done this work. Only check we don't need a different - * RX function */ + * RX and TX function. + */ if (rte_eal_process_type() != RTE_PROC_PRIMARY){ + struct igb_tx_queue *txq; + /* TX queue function in primary, set by last queue initialized */ + txq = eth_dev->data->tx_queues[eth_dev->data->nb_tx_queues-1]; + set_tx_function(eth_dev, txq); + if (eth_dev->data->scattered_rx) eth_dev->rx_pkt_burst = ixgbe_recv_scattered_pkts; return 0; diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c index 5c36bff285..ad42ceab66 100644 --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c @@ -1771,6 +1771,40 @@ static struct ixgbe_txq_ops def_txq_ops = { .reset = ixgbe_reset_tx_queue, }; +/* Takes an ethdev and a queue and sets up the tx function to be used based on + * the queue parameters. Used in tx_queue_setup by primary process and then + * in dev_init by secondary process when attaching to an existing ethdev. + */ +void +set_tx_function(struct rte_eth_dev *dev, struct igb_tx_queue *txq) +{ + /* Use a simple Tx queue (no offloads, no multi segs) if possible */ + if (((txq->txq_flags & IXGBE_SIMPLE_FLAGS) == IXGBE_SIMPLE_FLAGS) + && (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) { + PMD_INIT_LOG(INFO, "Using simple tx code path"); +#ifdef RTE_IXGBE_INC_VECTOR + if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ && + (rte_eal_process_type() != RTE_PROC_PRIMARY || + ixgbe_txq_vec_setup(txq) == 0)) { + PMD_INIT_LOG(INFO, "Vector tx enabled."); + dev->tx_pkt_burst = ixgbe_xmit_pkts_vec; + } else +#endif + dev->tx_pkt_burst = ixgbe_xmit_pkts_simple; + } else { + PMD_INIT_LOG(INFO, "Using full-featured tx code path"); + PMD_INIT_LOG(INFO, + " - txq_flags = %lx " "[IXGBE_SIMPLE_FLAGS=%lx]", + (unsigned long)txq->txq_flags, + (unsigned long)IXGBE_SIMPLE_FLAGS); + PMD_INIT_LOG(INFO, + " - tx_rs_thresh = %lu " "[RTE_PMD_IXGBE_TX_MAX_BURST=%lu]", + (unsigned long)txq->tx_rs_thresh, + (unsigned long)RTE_PMD_IXGBE_TX_MAX_BURST); + dev->tx_pkt_burst = ixgbe_xmit_pkts; + } +} + int ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx, @@ -1933,31 +1967,8 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev, PMD_INIT_LOG(DEBUG, "sw_ring=%p hw_ring=%p dma_addr=0x%"PRIx64, txq->sw_ring, txq->tx_ring, txq->tx_ring_phys_addr); - /* Use a simple Tx queue (no offloads, no multi segs) if possible */ - if (((txq->txq_flags & IXGBE_SIMPLE_FLAGS) == IXGBE_SIMPLE_FLAGS) && - (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) { - PMD_INIT_LOG(INFO, "Using simple tx code path"); -#ifdef RTE_IXGBE_INC_VECTOR - if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ && - ixgbe_txq_vec_setup(txq) == 0) { - PMD_INIT_LOG(INFO, "Vector tx enabled."); - dev->tx_pkt_burst = ixgbe_xmit_pkts_vec; - } - else -#endif - dev->tx_pkt_burst = ixgbe_xmit_pkts_simple; - } else { - PMD_INIT_LOG(INFO, "Using full-featured tx code path"); - PMD_INIT_LOG(INFO, " - txq_flags = %lx " - "[IXGBE_SIMPLE_FLAGS=%lx]", - (long unsigned)txq->txq_flags, - (long unsigned)IXGBE_SIMPLE_FLAGS); - PMD_INIT_LOG(INFO, " - tx_rs_thresh = %lu " - "[RTE_PMD_IXGBE_TX_MAX_BURST=%lu]", - (long unsigned)txq->tx_rs_thresh, - (long unsigned)RTE_PMD_IXGBE_TX_MAX_BURST); - dev->tx_pkt_burst = ixgbe_xmit_pkts; - } + /* set up vector or scalar TX function as appropriate */ + set_tx_function(dev, txq); txq->ops->reset(txq); diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h index 13099afbae..329007cbd6 100644 --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h @@ -248,6 +248,13 @@ struct ixgbe_txq_ops { IXGBE_ADVTXD_DCMD_DEXT |\ IXGBE_ADVTXD_DCMD_EOP) + +/* Takes an ethdev and a queue and sets up the tx function to be used based on + * the queue parameters. Used in tx_queue_setup by primary process and then + * in dev_init by secondary process when attaching to an existing ethdev. + */ +void set_tx_function(struct rte_eth_dev *dev, struct igb_tx_queue *txq); + #ifdef RTE_IXGBE_INC_VECTOR uint16_t ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts);